Search NASA⌕ Search

SEARCH · Search NASA

Results for “Moon's”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Recent results on the mass, gravitational field and moments of inertia of the moon.

Use of Doppler tracking data from the Lunar Orbiter series of spacecraft in an analysis of the spherical harmonic coefficients of the lunar gravitational field through thirteenth degree and order. The value obtained for the mass of the moon, GM = 4902.84 cu km/sec/sec, is in good agreement with previous results and with results obtained by alternate procedures. Acceleration contour plots, derived from the gravitational coefficients, show correlations with surface features on the near side of the moon, but are of questionable validity for the far side because of the lack of direct tracking data on the far side. Based on the most recent gravitational field data, the current estimate for the polar moment of inertia of the moon is C/Ma squared = 0.4019 super + 0.004 sub - 0.002. This value indicates that the interior of the moon can be homogeneous, but some results presented strongly suggest that the moon is differentiated, with an excess of mass in the direction toward the earth.

Michael, W. H., Jr.↗

The origin of the moon.

Recent studies of the dynamics and thermodynamics of the early solar nebula have provided a basis for a theory of the origin of the moon which is consistent with presently developed views of the origin of the solar system. The hypothesis of inhomogeneous planetary accretion is extended. It is suggested that the anomalous properties of the moon, such as its enrichment in Ca, Al, Ti, and other refractories and its depletion in iron and volatiles can be explained if the bulk of the moon represents a high temperature condensate. It is proposed that the moon is composed chiefly of compounds that condense before iron and that the volatile content of the moon was brought in as a thin veneer after the solar nebula dissipated.

Anderson, D. L.↗

System description and operating guide for DSAS illumination and moon conflict programs

The DSAS Illumination and Moon Conflict programs are described which during an orbit when the DSAS (Digital Solar Aspect Sensor) will record the direct rays of the sun, and the periods of time when the horizon scanners will come in conflict with the moon. The DSAS Illumination Program makes use of an orbit tape (or epoch time and orbital elements) in addition to an ephemeris tape containing positions of the sun and moon. The Moon Conflict Program makes use of the same ephemeris tape with sun and moon positions, but uses only epoch time and orbital elements for the satellite positions. These programs were designed for the TIROS or ITOS series spacecraft but may be utilized by any spacecraft with similar sensors.

Dunker, S. C.↗

Iron abundance in the moon from magnetometer measurements

Apollo 12 and 15 lunar surface magnetometer data with simultaneous lunar orbiting Explorer 35 data are used to plot hysteresis curves for the whole moon. From these curves a whole-moon permeability mu = 1.029 + 0.024 or - 0.019 is calculated. This result implies that the moon is not composed entirely of paramagnetic material, but that ferromagnetic material such as free iron exists in sufficient amounts to dominate the bulk lunar susceptibility. From the magnetic data the ferromagnetic free iron abundance is calculated. Then for assumed compositional models of the moon the additional paramagnetic iron is determined, yielding total lunar iron content. The calculated abundances are as follows: ferromagnetic free iron = 5 + or - 4 wt. percent, and total iron in the moon = 9 + or - 4 wt. percent.

Parkin, C. W.↗

Iron abundance in the moon from magnetometer measurements

Apollo 12 and 15 lunar surface magnetometer data with simultaneous lunar orbiting Explorer 35 data are used to plot hysteresis curves for the whole moon. From these curves a whole-moon permeability of 1.029 (+0.024 or -0.019) is calculated. This result implies that the moon is not composed entirely of paramagnetic material, but that ferromagnetic material such as free iron exists in sufficient amounts to dominate the bulk lunar susceptibility. From the magnetic data the ferromagnetic free iron abundance is calculated. Then for assumed compositional models of the moon the additional paramagnetic iron is determined, yielding total lunar iron content. The calculated abundances are as follows: ferromagnetic free iron, 5 plus or minus 4 wt %; total iron in the moon, 9 plus or minus 4 wt %.

Parkin, C. W.↗

The interior of the Moon

Questions of lunar bulk chemistry are being considered, giving attention to the depletion of the moon in iron and compounds more volatile than iron. Currently four seismic stations are operating on the moon to provide data for the study of the lunar interior. The travel times of seismic waves generated by artificial impacts have been used to determine the structure of the outer 150 km of the moon. New evidence fails to resolve the controversy whether the lunar interior is hot or cold. A schematic cross section of the moon is presented and problems concerning the origin of the moon are considered.

Anderson, D. L.↗

After Apollo - Fission origin of the moon

The present work maintains that the Apollo moon data substantiate the fission theory of the origin of the moon. It has been objected to this theory that prior to fission, the total mass and angular momentum of the earth-moon system would have to be greater than the present total of the earth and the moon, which would imply that angular momentum must have been lost since the fission. The present work states that this loss of momentum can be accounted for by the subsequent boiling off of a large amount of the original lunar mass. This would also mean that the moon ought to be greatly impoverished in volatiles, which it, indeed, is according to Apollo data. It is suggested that at one time the solar system was a binary star, namely, the sun and Jupiter. Successive fissions of Jupiter would have created other planets, which themselves could undergo fission, producing satellites.

Okeefe, J. A.↗

Tidal friction and the early history of the moon's orbit

The present work investigates the consequences implied by various rheological models of the early earth for the orbital history of the moon subsequent to its formation. Models of the earth that yield small tidal angles, such as low-viscosity models, imply that the moon never orbited in the earth's equatorial plane, thereby ruling out an equatorial origin for the moon. A high-viscosity model is shown to permit the moon to originate in the equatorial plane and still account for the present-day characteristics of the moon's orbit.

Rubincam, D. P.↗

Earth-moon system: Dynamics and parameter estimation

A theoretical development of the equations of motion governing the earth-moon system is presented. The earth and moon were treated as finite rigid bodies and a mutual potential was utilized. The sun and remaining planets were treated as particles. Relativistic, non-rigid, and dissipative effects were not included. The translational and rotational motion of the earth and moon were derived in a fully coupled set of equations. Euler parameters were used to model the rotational motions. The mathematical model is intended for use with data analysis software to estimate physical parameters of the earth-moon system using primarily LURE type data. Two program listings are included. Program ANEAMO computes the translational/rotational motion of the earth and moon from analytical solutions. Program RIGEM numerically integrates the fully coupled motions as described above.

Breedlove, W. J., Jr.↗

The Soviet-American Conference on Cosmochemistry of the Moon and Planets, Part 1

The basic goal of the conference was consideration of the origin of the planets of the solar system, based on the physical and chemical data obtained by study of the material of the moon and planets. Papers at the conference were presented in the following sessions: (1) Differentiation of the material of the moon and planets; (2) The thermal history of the moon; (3) Lunar gravitation and magnetism; (4) Chronology of the moon, planets, and meteorites; (5) The role of exogenic factors in the formation of the lunar surface; (6) Cosmochemical hypotheses about the origin and evolution of the moon and planets; and (7) New data about the planets Mercury, Venus, Mars, and Jupiter.

Pomeroy, J. H.↗

Riddles about the origin and thermal history of the moon

Magmatic differentiation of the moon's interior, confirmed through calculations of thermal history, was studied. It appears that differentiation was a result of the moon's initial temperature whose origin remains unknown. In solving this problem, convective models of the moon were considered as well as a two layered differentiated model of the moon, operative over the past 3.5 billion years. The high content of long lived radioactive elements present was investigated in explaining the moon's current thermal properties. The controversy concerning the true nature of magmatic differentiation continues to be unsolved.

Levin, B. Y.↗

Moon-Mercury - Large impact structures, isostasy and average crustal viscosity

It is shown that Mercury's surface has only 70% as many large craters (of at least 200 km in diameter) as the moon. The density of Mercurian impact craters having diameters over 400 km is 30% of that of the moon, and for craters with diameters between 400 and 700 km, Mercurian density is 21% of that of the moon. The size-frequency distribution curve of Mercury is the same as the lunar cumulative -2 slope. The Mercurian curve, however, lies well below the 10% surface saturation level of the lunar curve. This may indicate that the old, heavily-cratered Mercurian terrain is not presently in a state of cratering equilibrium. The differences in crater and basin densities observed between Mercury and the moon may be functions of crater-production rates or of different crustal histories. The total isostatic compensation of impact craters having diameters of about 800 km suggests that the average viscosity of the Mercurian crust during approximately the past 4 eons was the same as that of the moon.

Schaber, G.↗

Workshop on Pristine Highlands Rocks and the early History of the Moon

Oxide composition of the Moon, evidence for an initially totally molten Moon, geophysical contraints on lunar composition, random sampling of a layered intrusion, lunar highland rocks, early evolution of the Moon, mineralogy and petrology of the pristine rocks, relationship of the pristine nonmore rocks to the highlands soils and breccias, ferroan anorthositic norite, early lunar igneous history, compositional variation in ferroan anosthosites, a lunar magma ocean, deposits of lunar pristine rocks, lunar and planetary compositions and early fractionation in the solar nebula, Moon composition models, petrogenesis in a Moon with a chondritic refractory lithophile pattern, a terrestrial analog of lunar ilmenite bearing camulates, and the lunar magma ocean are summarized.

Longhi, J.↗

Origin of the Moon: In search of the holy grail

The Moon's origin could be deduced with certainty if its bulk chemistry were known. However, determination of this chemistry is difficult because of the profound and complex redistribution of elements that occurred in the outer portions of the Moon during crystallization of the magma ocean. The compositions of 23 varieties of volcanic glass, erupted from depths approaching 300 miles, were used to predict the chemistry of a special glass (genesis glass) having a direct link to primordial lunar matter. A sample of glass with the predicted composition was discovered. This allows a new estimate to be made of the Moon's bulk composition. The data indicate that the Moon shares some intriquing chemical similarities with the Earth's mantle. Both genesis glass and lunar gas are furnishing definitive data on the Moon's composition and origin.

Delano, J. W.↗

Bulk composition of the Moon in the context of models for condensation in the solar nebula

The FeO content of the Moon is substantially higher than the present FeO content of the Earth's mantle. If the Moon formed by fission from the Earth's mantle, then the conclusion that the Earth's mantle must have been much richer in FeO at the time of fission appears firm. If the Moon formed independently in geocentric orbit, then the FeO contents of the two bodies should be similar, because both would be accreting from the same source of silicate material. Therefore, Earth's mantle at the time of lunar formation probably had an FeO content quite similar to the present FeO content of the Moon. This conclusion, if valid, has profound implications in two areas: (1) the differentiation history of the Earth's mantle and core; and (2) the processes responsible for governing the bulk compositions of the terrestrial planets. If Earth had more FeO than previously thought, then the composition differences between Earth and Mars are less than previously believed. This suggests that condensation temperature and heliocentric distance may have been less important in governing planetary compositions and other mechanisms, including iron/silicate fractionation may have been more important. The implication of this model for the compositions of the Moon and the other terrestrial planets are discussed.

Goettel, K. A.↗

The I-Pu-Xe age of the Moon

The Rb-Sr analyses of some lunar samples which indicate that the Moon is close to the age of primitive meteorites are only reliable to within about 100 m.y. A potentially more precise chronometer is the I-Pu-Xe system. I129 has a 17 m.y. halflife and decays to Xe129; Pu244, with an 82 m.y. halflife, produces Xe131 to Xe136 in fission. The I129/Pu244 ratio has a halflife of 21 m.y. Xenon retention for the Earth could have begun as late as the event that gave birth to the Moon. For the Moon, it is hard to imagine that xenon retention could have begun before re-accretion of the fissioned (and initially dispersed?) material, particularly if that material got hot enough to account for the depletion of the volatile elements. Thus, if fission model are correct, xenon retention in the Earth certainly began no later than in the Moon, and possibly began earlier. Therefore, the I-Pu-Xe system is only marginally consistent with a fission origin. If further study confirms that the I/U ratio of the Moon is .01 or less, or if gas-rich lunar highland breccias with higher ratios of I129 to Pu244 are found, it would be difficult to explain the results in an earth-fission model of lunar origin.

Swindle, T. D.↗

The Moon's orbit history and inferences on its origin

A frequency dependent model of tidal friction was used to determine the evolution of the Earth-Moon system. The analysis considers the lunar orbit eccentricity and inclination, the solar tide on the Earth, Earth oblateness, and higher order terms in the tidal potential. A solution of the equations governing the precession of the Earth's rotational angular momentum and the lunar ascending node is found. The history is consistent with a capture origin for the Moon. It rules out the origin of the Moon by fission. Results are shown for a range of assumed values for the lunar tidal dissipation. Tidal dissipation within the Moon, during what would be the immediate postcapture period, is shown to be capable of significantly heating the Moon. The immediate postcapture orbit has a periapsis within the Earth's Roche limit. Capture into resonance with the Earth's gravitational field as this orbit tidally evolves is suggested to be a mechanism to prevent so close, an approach. It is shown that the probability of such capture is negligibly small and alternative hypotheses for the survival of the Roche limit passage is offered.

Conway, B. A.↗

A numerical investigation of planetesimal collision trajectories with a Moon accumulating in Earth orbit

In the scenario of lunar origin in which the Moon is assumed to have accreted most of its mass while in orbit about the Earth, ismals on the accrea knowledge of the relative impact rates of heliocentric planetting Earth and Moon is essential for any attempt to establish dynamical constraints on lunar origin. Numerical integrations of the regularized equations of motion for four bodies (Sun, Earth, Moon, planetismal) were done. A planetismal impact trajectory was calculated by assuming that the planetismal has hit the surface of the Moon at an assumed location, traveling in an assumed direction, and with an assumed impact speed. Next, the equations of motion were numerically integrated backward in time in order to determine from where the planetismal has come. In this way those volumes in heliocentric orbital element space which contribute trajectories that directly impact the Moon.

Cox, L. P.↗