Search NASA⌕ Search

SEARCH · Search NASA

Results for “NITRIC ACID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Astatine partitioning between nitric acid and conventional solvents: indication of covalency in ketone complexation of AtO +

Astatine-211 has been produced at Texas A&M University on the K150 cyclotron, with a yield of 890 ± 80 MBq through the 209 Bi(α,2n) 211 At reaction via an 8 h bombardment with a beam current of 4–8 μA and an α-particle beam energy of 28.8 MeV. The target was then dissolved in HNO 3 and the extraction of 211 At was investigated into a variety of organic solvents in 1–3 M HNO 3 . Extraction of 211 At with distribution ratios as high as 11.3 ± 0.6, 12.3 ± 0.8, 42.2 ± 2.2, 69 ± 4, and 95 ± 6 were observed for diisopropyl ether, 1-decanol, 1-octanol, 3-octanone, and methyl isobutyl ketone, respectively, while the distribution ratios for 207 Bi were ≤0.05 in all cases. The extraction of 211 At into both methyl isobutyl ketone and 3-octanone showed a strong, linear dependence on the HNO 3 initial aqueous concentration and better extraction than other solvents. DFT calculations show stronger binding between the carbonyl oxygen of the ketone and the At metal center.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dissolution of used nuclear fuel using recycled nitric acid

An evaluation was performed on the feasibility of using HB-Line anion exchange column waste streams from Alternate Feedstock 2 (AFS-2) processing for the dissolver solution for used nuclear fuel (UNF) processing. The targeted UNF for dissolution using recycled solution are fuels similar to the University of Missouri Research Reactor (MURR) fuel. Furthermore, the objectives of this experimental program were to validate the feasibility of using impure dissolver solutions with the MURR dissolution flowsheet to verify they would not significantly affect dissolution of the UNF in a detrimental manner.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Separation of dilute plutonium(IV) from nitric acid solutions via Reillex HPQ anion exchange resin

Anion exchange is a common method for the separation of plutonium (Pu) in aqueous systems, providing high recovery and decontamination from impurities. Reillex HPQ anion exchange resin has been used around the Department of Energy complex in this application for decades but has typically been used for Pu feed concentrations greater than 1 g/L. It is desirable to recover Pu at more dilute concentrations from a dissolved used fuel or target element, for example. In this work, the performance of Reillex HPQ anion exchange resin was characterized with feed solutions of ca. 0.24 g/L Pu. A significant reduction in the performance of the resin was realized with this dilute concentration relative to a feed solution of 2.35 g/L Pu with similar feed flow rates and the same resin column, likely due to the increased driving force for mass transfer with a higher feed concentration. The maximum capacity of Reillex HPQ resin for Pu can be improved by reducing the flow rate and increasing the feed Pu concentration. Furthermore, the breakthrough point of Pu can be improved in the same manner and by increasing the resin bed height. Diffusion of Pu into the resin was illustrated to be the rate limiting step.

Plutonium separations↗

Extraction Behavior of Ln(III) ions by T2EHDGA/n-dodecane from Nitric acid and Sodium Nitrate Solutions

The diglycolamide extractant, T2EHDGA, has proven promising for the separation of lanthanides and minor actinides in high-level nuclear waste reprocessing. This neutral extractant has shown significant extraction capacity for HNO3 into the non-polar organic phase, along with hyper-stoichiometric nitrate dependence on extraction of trivalent f-elements. The transport behavior of T2EHDGA/n-dodecane toward trivalent lanthanides is not well understood. This work found a significant increase in distribution measurements for Eu(III) extracted from aqueous HNO3 media as compared to NaNO3. The extraction of Eu(III) from HNO3 results in a different thermodynamic product than predicted by classic solvent extraction of 3:1 ligand-metal complex as observed with NaNO3 in FTIR and UV-vis spectroscopy. Experimental distribution measurements in conjunction with the solvent extraction modeling program, SXLSQI, suggest participation of 1- to 2 HNO3 molecules in the Eu(III)/T2EHDGA complex when extracted from HNO3 media, indicative of a mechanism change responsible for the enhanced extraction behavior toward lanthanides in the presence of HNO3.

Campbell, Emily L.↗

Gadolinium Oxalate Solubility Measurements in Nitric Acid Solutions

HB-Line will begin processing Pu solutions during FY2012 that will involve the recovery of Pu using oxalate precipitation and filtration. After the precipitation and filtration processes, the filtrate solution will be transferred from HB-Line to H-Canyon. The presence of excess oxalate and unfiltered Pu oxalate solids in these solutions create a criticality safety issue if they are sent to H-Canyon without controls in H-Canyon. One approach involves H-Canyon receiving the filtrate solution into a tank that is poisoned with soluble gadolinium (Gd). Decomposition of the oxalate will occur within a subsequent H-Canyon vessel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Quantifying neptunium oxidation states in nitric acid through spectroelectrochemistry and chemometrics

Controlled-potential in situ thin-layer spectropotentiometry was leveraged to generate visible/near-infrared (VIS/NIR) absorption spectral data sets for the development of chemometric models to quantify Np(III/IV/V/VI) oxidation states in HNO 3 . This technology would be valuable in laboratory studies and when monitoring process solutions to guide feed adjustments for radiochemical separations—the performance of which depends on oxidation state. This approach successfully isolated and stabilized Np species in pure (~99%) oxidation states without compromising solution optical properties. Multivariate curve resolution–alternating least squares models were evaluated to resolve spectral and component concentrations from a scan that sequentially produced Np(VI), Np(V), Np(IV), and Np(III) spectra with mixtures of two valences at a time. Although it provided a useful approximation, the method was not able to quantitively resolve each component likely because of rotational ambiguity. Additionally, partial least squares regression models were built from artificial and electrochemically generated VIS/NIR spectral training sets to study the effect of interionic interactions on spectral characteristics. Models built with true Bi-chemical mixtures of coexisting Np oxidation states and spectra generated from additive combinations of pure end points had similar prediction performance. This methodology can be used to directly quantify Np concentration and the ratio of Np oxidation states and other actinides in remote settings such as hot cells.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Partial Least Squares, Experimental Design, and Near-Infrared Spectrophotometry for the Remote Quantification of Nitric Acid Concentration and Temperature

Near-infrared spectrophotometry and partial least squares regression (PLSR) were evaluated to create a pleasantly simple yet effective approach for measuring HNO3 concentration with varying temperature levels. A training set, which covered HNO3 concentrations (0.1–8 M) and temperature (10–40 °C), was selected using a D-optimal design to minimize the number of samples required in the calibration set for PLSR analysis. The top D-optimal-selected PLSR models had root mean squared error of prediction values of 1.4% for HNO 3 and 4.0% for temperature. The PLSR models built from spectra collected on static samples were validated against flow tests including HNO 3 concentration and temperature gradients to test abnormal conditions (e.g., bubbles) and the model performance between sample points in the factor space. Based on cross-validation and prediction modeling statistics, the designed near-infrared absorption approach can provide remote, quantitative analysis of HNO 3 concentration and temperature for production-oriented applications in facilities where laser safety challenges would inhibit the implementation of other optical techniques (e.g., Raman spectroscopy) and in which space, time, and/or resources are constrained. The experimental design approach effectively minimized the number of samples in the training set and maintained or improved PLSR model performance, which makes the described chemometric approach more amenable to nuclear field applications.

07 ISOTOPE AND RADIATION SOURCES↗

Gas-phase activation of holmium tetranitrato complexes likely leads to formation of hydroxylated species through the loss of nitric acid, not water splitting

It has been observed that water can react with activated gas-phase lanthanide tetranitrato complexes ([Ln(NO3)4]-) to form a hydroxylated species. These reactions, which are proposed to involve water splitting, are observed for most -- but not all -- of the lanthanides. Thus, study of this system could yield insight into how small changes in electronic structure (through variation of the lanthanide species) influences water-splitting reactions, help guide development of new materials used to convert water to hydrogen using electricity. The mechanism proposed in the literature is: (Step 1) [Ln(NO3)4]- ? [LnO(NO3)3]- + ?NO2 (Step 2) [LnO(NO3)3]- + H2O ? [LnOH(NO3)3]- + ?OH The purpose of this study is to determine if the reaction mechanism really does involve splitting of water or proceeds through an alternative pathway.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interim glycol flowsheet reduction/oxidation (redox) model for the Defense Waste Processing Facility (DWPF)

Control of the REDuction/OXidation (REDOX) state of glasses containing high concentrations of transition metals, such as High Level Waste (HLW) glasses, is critical in order to eliminate processing difficulties caused by overly reduced or overly oxidized melts. Operation of a HLW melter at Fe +2 /ΣFe ratios of between 0.09 and 0.33, a range which is not overly oxidizing or overly reducing, helps retain radionuclides in the melt, i.e. long-lived radioactive 99 Tc species in the less volatile reduced Tc 4+ state, 104 Ru in the melt as reduced Ru +4 state as insoluble RuO 2 , and hazardous volatile Cr 6+ in the less soluble and less volatile Cr +3 state in the glass. The melter REDOX control balances the oxidants and reductants from the feed and from processing additives such as antifoam. Currently, the Defense Waste Processing Facility (DWPF) is running a formic acid-nitric acid (FN) flowsheet where formic acid is the main reductant and nitric acid is the main oxidant. During decomposition formate and formic acid releases H 2 gas which requires close control of the melter vapor space flammability. A switch to a nitric acid-glycolic acid (GN) flowsheet is desired as the glycolic acid flowsheet releases considerably less H 2 gas upon decomposition. This would greatly simplify DWPF processing. Development of an EE term for glycolic acid in the GN flowsheet is documented in this study.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Implementation of flowsheet change to minimize hydrogen and ammonia generation during chemical processing of high level waste in the Defense Waste Processing Facility

Testing was completed to develop a chemical processing flowsheet for the Defense Waste Processing Facility (DWPF), designed to vitrify and stabilize high level radioactive waste. DWPF processing uses a reducing acid (formic acid) and an oxidizing acid (nitric acid) to rheologically thin the slurry and complete the necessary acid base and reduction reactions (primarily mercury and manganese). Formic acid reduces mercuric oxide to elemental mercury, allowing the mercury to be removed during the boiling phase of processing through steam stripping. In runs with active catalysts, formic acid can decompose to hydrogen and nitrate can be reduced to ammonia, both flammable gases, due to rhodium and ruthenium catalysis. Replacement of formic acid with glycolic acid eliminates the generation of rhodium- and ruthenium-catalyzed hydrogen and ammonia. In addition, mercury reduction is still effective with glycolic acid. Hydrogen, ammonia and mercury are discussed in the body of the report. Ten abbreviated tests were completed to develop the operating window for implementation of the flowsheet and determine the impact of changes in acid stoichiometry and the blend of nitric and glycolic acid as it impacts various processing variables over a wide processing region. Three full-length 4-L lab-scale simulations demonstrated the viability of the flowsheet under planned operating conditions. The flowsheet is planned for implementation in early 2017.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Industry

This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of industrial mitigation for sustainable development is discussed in Section 7.7. Section 7.8 discusses the sector's vulnerability to climate change and options for adaptation. A number of policies have been designed either to encourage voluntary GHG emission reductions from the industrial sector or to mandate such reductions. Section 7.9 describes these policies and the experience gained to date. Co-benefits of reducing GHG emissions from the industrial sector are discussed in Section 7.10. Development of new technology is key to the cost-effective control of industrial GHG emissions. Section 7.11 discusses research, development, deployment and diffusion in the industrial sector and Section 7.12, the long-term (post-2030) technologies for GHG emissions reduction from the industrial sector. Section 7.13 summarizes gaps in knowledge.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Ab-initio simulations of chemical stability indicators of the bis-DGA-type molecule and its radiation degradation products

For hydrometallurgical treatment of the high level liquid waste (HLLW) in the DIAMEX and SANEX processes, organic compounds of the bis-DGA family are used as cation extractants in apolar solvents. For the compound of m-xylylene-bis-diglycolamide high distribution coefficients for Eu and Am were found. Since the environment of the process is highly radioactive and acidic (nitric acid), it is necessary to ensure the stability of the extractants. In order to analyse the process theoretically, the molecule of m-xylylene-bis- diglycolamide and two of its degradation products were simulated by the DFT computational methods (PBE, RPBE, BLYP, B3LYP) available within the simulation environment DMol{sup 3} 6.1 and Gaussian 09 software. The local chemical stability of some locations of the molecule was assessed from the calculated stability indicators (electrostatic potential, Fukui function, HOMO localization). In connection with the chemical treatment, especially the stability against an electrophilic attack was tested. The results of calculated bond orders and spatial distribution of electrostatic potential and HOMO were are successfully correlated with the local and general stability determined by the experiment. These results should be helpful for the further development of the separation process. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Systematic study on the influence of the morphology of α-MoO{sub 3} in the selective oxidation of propylene

A variety of morphologically different α-MoO{sub 3} samples were prepared by hydrothermal synthesis and applied in the selective oxidation of propylene. Their catalytic performance was compared to α-MoO{sub 3} prepared by flame spray pyrolysis (FSP) and a classical synthesis route. Hydrothermal synthesis from ammonium heptamolybdate (AHM) and nitric acid at pH 1–2 led to ammonium containing molybdenum oxide phases that were completely transformed into α-MoO{sub 3} after calcination at 550 °C. A one-step synthesis of α-MoO{sub 3} rods was possible starting from MoO{sub 3}·2H{sub 2}O with acetic acid or nitric acid and from AHM with nitric acid at 180 °C. Particularly, if nitric acid was used during synthesis, the rod-like morphology of the samples could be stabilized during calcination at 550 °C and the following catalytic activity tests, which was beneficial for the catalytic performance in propylene oxidation. Characterization studies using X-ray diffraction (XRD), scanning electron microscopy (SEM) and Raman spectroscopy showed that those samples, which retained their rod-like morphology during the activity tests, yielded the highest propylene conversion. - Graphical abstract: Hydrothermal synthesis from MoO{sub 3}·2H{sub 2}O in the presence of HNO{sub 3} led to rod-shaped particles which mainly expose (1 0 0) facets which are the most active surfaces. - Highlights: • Hydrothermal synthesis of MoO3 resulted in either rod or slab shaped particles depending on pH. • At pH<0 rods stable towards calcination and catalytic activity testing were formed. • Rod shaped particles had significantly higher activity than slab shaped ones. • The rod shaped particles mainly expose the (1 0 0) facets which are the most active surfaces. • Total surface area is not main determining factor for catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coal fly ash interaction with environmental fluids: Geochemical and strontium isotope results from combined column and batch leaching experiments

The major element and Sr isotope systematics and geochemistry of coal fly ash and its interactions with environmental waters were investigated using laboratory flow-through column leaching experiments (sodium carbonate, acetic acid, nitric acid) and sequential batch leaching experiments (water, acetic acid, hydrochloric acid). Column leaching of Class F fly ash samples shows rapid release of most major elements early in the leaching procedure, suggesting an association of these elements with soluble and surface bound phases. Delayed release of certain elements (e.g., Al, Fe, Si) signals gradual dissolution of more resistant silicate or glass phases as leaching continues. Strontium isotope results from both column and batch leaching experiments show a marked increase in {sup 87}Sr/{sup 86}Sr ratio with continued leaching, yielding a total range of values from 0.7107 to 0.7138. For comparison, the isotopic composition of fluid output from a fly ash impoundment in West Virginia falls in a narrow range around 0.7124. The experimental data suggest the presence of a more resistant, highly radiogenic silicate phase that survives the combustion process and is leached after the more soluble minerals are removed. Strontium isotopic homogenization of minerals in coal does not always occur during the combustion process, despite the high temperatures encountered in the boiler. Early-released Sr tends to be isotopically uniform; thus the Sr isotopic composition of fly ash could be distinguishable from other sources and is a useful tool for quantifying the possible contribution of fly ash leaching to the total dissolved load in natural surface and ground waters.

01 COAL, LIGNITE, AND PEAT↗