Search NASA⌕ Search

SEARCH · Search NASA

Results for “Null modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Cumulative frequency distribution of past species extinctions

Analysis of Sepkoski's compendium of the time ranges of 30,000+ taxa yields a mean duration of 28.4 ma for genera of fossil invertebrates. This converts to an average extinction rate of 3.5 percent per million years or about one percent every 286,000 years. Using survivorship techniques, these estimates can be converted to the species level, yielding a Phanerozoic average of one percent species extinction every 40,000 years. Variation in extinction rates through time is far greater than the null expectation of a homogeneous birth-death model and this reflects the well-known episodicity of extinction ranging from a few large mass extinctions to so-called background extinction. The observed variation in rates can be used to construct a cumulative frequency distribution of extinction intensity, and this distribution, in the form of a kill curve for species, shows the expected waiting times between extinction events of a given intensity. The kill curve is an average description of the extinction events of a given intensity. The kill curve is an average description of the extinction record and does not imply any cause or causes of extinction. The kill curve shows, among other things, that only about five percent of total species extinctions in the Phanerozoic were involved in the five largest mass extinctions. The other 95 percent were distributed among large and small events not normally called mass extinctions. As an exploration of the possibly absurd proposition that most past extinctions were produced by the effects of large-body impact, the kill curve for species was mapped on the comparable distribution for comet and asteroid impacts. The result is a curve predicting the species kill for a given size of impacting object (expressed as crater size). The results are reasonable in that impacts producing craters less than 30 km (diameter) cause negligible extinction but those producing craters 100-150 km (diameter) cause extinction of species in the range of 45-60 percent.

Raup, D. M.↗
NASA NTRS1996

Adaptive Orbit Determination for Interplanetary Spacecraft

The interplanetary orbit problem has been traditionally solved using least-squares techniques. Due to operational limitations of this method, a Kalman filter approach has been proposed for future missions which includes all spacecraft and measurement modeling states in the filter.

adaptive↗
DOE OSTI2025

Simulations of the churning mode: Toroidally symmetric plasma convection and turbulence around the X-points in a snowflake divertor

Using a reduced MHD model, extended to include field-aligned thermal conduction, we present numerical simulations of the churning mode (CM): a toroidally symmetric, non-linear plasma vortex in the vicinity of the null points in a snowflake (SF) divertor [D. D. Ryutov et al., Phys. Scr. 89, 088002 (2014)]. Simulations are carried out across a range of inter-null separations, d xx ⁠, and inter-null orientations, θ⁠, primarily in conditions relevant to the MAST-U tokamak. We find that, when d xx is small, the CM induces additional transport across the X-points when β pm ≳8%, where β pm is the ratio of the plasma pressure in the null region to poloidal magnetic pressure at the midplane. This transport also increases approximately linearly as d xx is reduced. A diffusive model of this transport is shown to predict the total transport across the null points, where diffusion coefficients of up to ∼ 10 2 m 2 s −1 centered on a small region around the X-points are used. However, the CM also results in significant changes to the flux surfaces in the null region, which is not captured by this diffusive model. The changes in magnetic geometry mean the fractional exhaust power delivered to each divertor leg is highly sensitive to β pm ⁠, d xx ⁠, and θ⁠. For small values of θ⁠, the CM can induce a change in topology, redirecting exhaust power from a secondary divertor leg on the high field side to one on the low field side. Similar behavior is found in the fraction of exhaust power going to the inner and outer divertor. Such changes in the flux surfaces may not be captured by Grad–Shafranov solvers and so may be a source of error in the magnetic reconstruction of SF experiments. We consistently find that the fractional exhaust power going to a secondary divertor leg on the high field side is small, consistent with SF experiments.

Computer simulation↗
NASA NTRS2002

Deep Nulling of laser light in a rotational shearing interferometer

There is great interest in techniques that potentially enable the direct detection of light from planets orbiting nearby stars. In one technique, nulling interfer~metry, the light from two or more separate telescopes can be destructively interfered to cancel the light from the star, allowing detection of the faint off-axis light from an orbiting planet or circumstellar disc. At the Jet Propulsion Laboratory, broadband white light nulls limited by dispersion effects have been previously reported. In this paper, we investigate other limiting effects using a monochromatic laser source. We report transient laser nulls as deep as 1 part in 10^6 and stabilized nulls as deep as 1 part in 10^5 at a wavelength of 633 nm and discuss the techniques used to obtain these nulls and the residual sources of stray light. We compare the measured performance of the rotational shearing interferometer with a theoretical model.

nulling↗
NASA NTRS2011

Fine Guidance Sensing for Coronagraphic Observatories

Three options have been developed for Fine Guidance Sensing (FGS) for coronagraphic observatories using a Fine Guidance Camera within a coronagraphic instrument. Coronagraphic observatories require very fine precision pointing in order to image faint objects at very small distances from a target star. The Fine Guidance Camera measures the direction to the target star. The first option, referred to as Spot, was to collect all of the light reflected from a coronagraph occulter onto a focal plane, producing an Airy-type point spread function (PSF). This would allow almost all of the starlight from the central star to be used for centroiding. The second approach, referred to as Punctured Disk, collects the light that bypasses a central obscuration, producing a PSF with a punctured central disk. The final approach, referred to as Lyot, collects light after passing through the occulter at the Lyot stop. The study includes generation of representative images for each option by the science team, followed by an engineering evaluation of a centroiding or a photometric algorithm for each option. After the alignment of the coronagraph to the fine guidance system, a "nulling" point on the FGS focal point is determined by calibration. This alignment is implemented by a fine alignment mechanism that is part of the fine guidance camera selection mirror. If the star images meet the modeling assumptions, and the star "centroid" can be driven to that nulling point, the contrast for the coronagraph will be maximized.

Brugarolas, Paul↗
DOE OSTI2022

Modeling intrinsic galaxy alignment in the MICE simulation

The intrinsic alignment (IA) of galaxies is potentially a major limitation in deriving cosmological constraints from weak lensing surveys. In order to investigate this effect, we assign intrinsic shapes and orientations to galaxies in the light-cone output of the MICE simulation, spanning ~ 5000 deg 2 and reaching redshift Z = 1.4. This assignment is based on a semianalytic IA model that uses photometric properties of galaxies as well as the spin and shape of their host halos. Advancing on previous work, we include more realistic distributions of galaxy shapes and a luminosity-dependent galaxy-halo alignment. The IA model parameters are calibrated against COSMOS and BOSS LOWZ observations. The null detection of IA in observations of blue galaxies is accounted for by setting random orientations for these objects. We compare the two-point alignment statistics measured in the simulation against predictions from the analytical IA models NLA and TATT over a wide range of scales, redshifts, and luminosities for red and blue galaxies separately. We find that both models fit the measurements well at scales above 8h -1 Mpc, while TATT outperforms NLA at smaller scales. The IA parameters derived from our fits are in broad agreement with various observational constraints from red galaxies. Finally, we build a realistic source sample, mimicking DES Year 3 observations and use it to predict the IA contamination to the observed shear statistics. We find this prediction to be within the measurement uncertainty, which might be a consequence of the random alignment of blue galaxies in the simulation.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1993

An Unipolar Terminal-Attractor Based Neural Associative Memory with Adaptive Threshold and Perfect Convergence

For the first time, a unipolar terminal-attractor based neural associative memory (TABAM)system with adaptive threshold and perfect convergence is presented. By adaptively setting thethreshold values for the dynamic iteration for the unipolar binary neuron states with terminal-attractors and inner-product approach, we demonstrate via computer simulation the achievement ofperfect convergence and correct retrieval. The simulation is completed with a small number of storedstates (M) and a small number of neurons (N) but a large M/N ratio. An experiment with exclusive-or logic operation using LCTV SLMs is used to show feasibility of the optoelectronic implementationof the models.

Associative↗
NASA NTRS2025

Navigating Team Dynamics: Automated Detection of Micro-Behaviors Between Team Members Through Longitudinal Interaction Data

The success in future long term space exploration missions will depend on the cooperation, coordination, and mutual understanding among the crew members. Micro-behaviors are momentary, subtle linguistic and paralinguistic indicators of thinking and feeling toward another member of the team (Cortina et al., 2001; Smith & Griffiths, 2022) that can significantly impact team dynamics and influence the overall team performance (Paromita & Chaspari, 2024). Due to their interactive nature, micro-behaviors have a sender (i.e., the team member expressing the micro-behavior) and a target (the team member impacted by the micro-behavior). Detection of these behaviors can assist in avoiding possible conflict among crew members and promoting the overall team success. Our prior research focused on an initial proof of concept of machine learning (ML) models and natural language processing (NLP) techniques that were used for automatically detect micro-behaviors among crew members of the US National Aeronautics and Space Administration’s (NASA) Human Exploration Research Analog (HERA) Campaigns 4 and 5 missions (Paromita et al., 2023). Results underscored the importance of incorporating contextual information in the ML models in the form of sentiment analysis, type of task, and dyadic interaction among team members. Here, we expand the scope of our prior work in two ways. First, we assess ML/NLP methods on new behavioral annotations coded using an adapted version of Smith & Griffins (2022) theoretical framework in terms of Violation (i.e., presence of valenced behavior, uplifting/positive or discouraging/negative), Intensity (i.e., force of behavior in terms of how uplifting or discouraging is the behavior), and Intent (i.e., motive of the behavior in terms of whether it was deliberate or unintentional). Second, we expand the design of the ML model to preserve information about the role of each team member within the occurrence of the micro-behavior (in contrast to the previous model that only considered the sender and the target without determining the team member role). This allows to consider all team members' contributions in the conversation and model long-term dependencies in the dialogue. Our experiments for this study are conducted on data from 5 teams of the NASA HERA C4 (NASA grant NNX16AQ48G (PI: Bell)). Conversations were extracted from the 1.5 hour Team Interaction Battery (TIB) task that occurred 5 times in-mission per crew. This resulted in a total of 13,058 conversational turns (i.e., 17.8% uplifting, 3.3% discouraging, 75.76% neutral, 3.14% nulls). Our findings with the revised behavioral coding and ML/NLP models indicate a 43.66% macro F1-score (i.e., 38.29% precision (P), 50.8% recall (R)) for a dialog state-tracking model that includes information from the sender only, and a 40.9% F1-score (i.e., 38.7% P, 43.36% R) for the same model that includes information from both the sender and the target of the micro-behavior. These are significantly higher compared to simple random forest models that classify behaviors strictly based on speech content and do not consider iterative team dynamics, achieving a 36.07% F1-score (i.e., 39.04% R, 33.53% P). Our findings demonstrate potential ways to leverage large conversational datasets to better capture complex team dynamics. We will discuss future directions including proposed models that can incorporate additional mission days and tasks beyond the TIB for objectively quantifying team behavior at high temporal resolution in space exploration missions.

Projna Paromita↗
DOE OSTI2020

Aftershocks of a Chemical Explosion in Granite from the Source Physics Experiment Phase I

The Source Physics Experiment (SPE) is a multiphase experiment to better understand explosion source physics and thereby improve explosion monitoring. The rst phase (Phase I) examined the explosion source in a hard-rock medium and took place in a granite outcrop called the Climax Stock section of the Nevada National Security Site (NNSS). This series of chemical explosions are called the Wet Granite Geology (WGG) events, but are usually referred to simply as the SPE events (i.e., SPE-1, SPE-2, etc.). Event information for the chemical explosions is given in Table 1. The study of explosion aftershocks can aid in understanding of in-situ stresses and be used as a discriminant for earthquakes [Ford and Walter, 2010]. Sweeney and Harben reported no observed aftershocks for SPE-1 and -2, respectively. They calculated a minimum magnitude of observation based on the noise oor of the seismic array and predicted at least one or two events in the week after the events using the hard-rock aftershock model from Ford and Labak. Possible explanations for the null observation ranged from instrumental - poor seismometer coupling, to physical - the shallow depth of burial was unable to access the deep tectonic stress that causes some explosion aftershocks. We extend the analysis of Sweeney and Harben to the largest of the SPE Phase I chemical explosions, SPE-5, which was approximately a 5 tonne TNT-equivalent shot at 76.5 m depth. This event registered as an M L 2 on the University of Nevada, Reno seismic network and should produce a measurable aftershock sequence.

58 GEOSCIENCES↗
NASA NTRS2017

Thermal Expansion from Stochastic Nonlinear Acoustic Fields

The methods of stochastic mechanics are applied to nonlinear acoustic fields generated by random acoustic radiation sources associated with oscillating lattice sites in nonlinear lattices. The assumption of stochastically independent zero-point and temperature-dependent acoustic fields leads to expressions of the thermodynamic internal and Helmholtz free energies per unit mass in terms of modal energies per unit mass that account for the nonlinearity of the propagation modes. The thermodynamic state functions canonically transform to the familiar results of a system of quantized, simple harmonic oscillators in the linear field limit. The thermal expansion coefficient, derived from the Helmholtz free energy per unit mass, is obtained as a sum of the zero-point modal nonlinearity parameters, weighted by temperature-dependent, modal heat capacities. The relationship is fully anharmonic, in contrast to commonly used quasi-harmonic models, and predicts with excellent agreement the experimentally observed null thermal expansion of vitreous silica at the ‘cross-over’ temperature corresponding to the balance between long wavelength modes that contribute negative nonlinearity parameters to the modal sum and short wavelength modes that contribute positive nonlinearity parameters.

Cantrell, John H., Jr.↗
DOE OSTI2020

The impact of the fiducial cosmology assumption on BAO distance scale measurements

ABSTRACT Standard analysis pipelines for measurements of Baryon Acoustic Oscillations (BAO) in galaxy surveys make use of a fiducial cosmological model to guide the data compression required to transform from observed redshifts and angles to the measured angular and radial BAO peak positions. In order to remove any dependence on the fiducial cosmology from the results, all models compared to the data should mimic the compression and its dependence on the fiducial model. In practice, approximations are made when testing models: (1) There is assumed to be no residual dependence on the fiducial cosmology after reconstruction, (2) differences in the distance–redshift relationship are assumed to match a linear scaling, and (3) differences in clustering between true and fiducial models are assumed to be removed by the free parameters used to null the non-BAO signal. We test these approximations using the current standard measurement procedure with a set of halo catalogues from the aemulus suite of N-body simulations, which span a range of wCDM cosmological models. We focus on reconstruction of the primordial BAO and locating the BAO. For the range of wCDM cosmologies covered by the aemulus suite, we find no evidence for systematic errors in the measured BAO shift parameters α∥ and α⊥ to $\lt 0.1\%$. However, the measured errors $\sigma _{\alpha _{\parallel }}$ and $\sigma _{\alpha _{\bot }}$ show a notable absolute increase by up to +0.001 and +0.002, respectively, in the case that the fiducial cosmology does not match the truth. These effects on the inferred BAO scale will be important, given the precision of measurements expected from future surveys including DESI, Euclid, and WFIRST.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2003

The Madden-Julian Oscillation and its Impact on Northern Hemisphere Weather Predictability during Wintertime

The Madden-Julian Oscillation (MJO) is known as the dominant mode of tropical intraseasonal variability and has an important role in the coupled-atmosphere system. This study used twin numerical model experiments to investigate the influence of the MJO activity on weather predictability in the midlatitudes of the Northern Hemisphere during boreal winter. The National Aeronautics and Space Administration (NASA) Goddard laboratory for the Atmospheres (GLA) general circulation model was first used in a 10-yr simulation with fixed climatological SSTs to generate a validation data set as well as to select initial conditions for active MJO periods and Null cases. Two perturbation numerical experiments were performed for the 75 cases selected [(4 MJO phases + Null phase) _ 15 initial conditions in each]. For each alternative initial condition, the model was integrated for 90 days. Mean anomaly correlations in the midlatitudes of the Northern Hemisphere (2O deg N_60 deg.N) and standardized root-mean-square errors were computed to validate forecasts and control run. The analyses of 500-hPa geopotential height, 200-hPa Streamfunction and 850-hPa zonal wind component systematically show larger predictability during periods of active MJO as opposed to quiescent episodes of the oscillation.

Jones, Charles↗
NASA NTRSDate not supplied

Evaluating Meteorological Dust Events and Machine-Learning Based Dust Identification in Geostationary Satellite Imagery

NASA scientists in the Short-term Prediction Research and Transition Center (SPoRT) developed a physically-based machine learning approach to identify dust in satellite imagery with a focus on night-time dust detection (Berndt et al. 201; DustTracker-AI). NASA/NOAA Geostationary Environmental Operational Satellite-16 (GOES-16) imagery was used for training and model inputs. The training, testing and validation data set consists of 28 events in the Southwest United States, capturing dust and null events in the region from 2018-2020.With 83 distinct images and millions of pixels a random forest model was trained and validated, correctly labeling 85% of dust pixels.For the first time, the model was run in near-real time production during the spring of 2022 and dust probability visualizations were made available to NOAA National Weather Service (NWS) forecasters to assess its utility for dust forecasting. Results indicated the model helped increase the confidence in the presence of dust and enabled dust tracking for a longer period of time into the night-time hours. Forecaster assessment and running the model in near real-time allowed for the team to determine the types of events missed, captured, and false alarms. To gain additional context on model performance,the SPoRT team sought to gather more detailed information on the training database(e.g., meteorological characteristics and drivers). The goal of this project was to identify the meteorological drivers for the dust events and create a database which synthesized information from observations, forecaster discussions, and analyses pertaining to the dust events to understand the types of events currently used to train the model. A more detailed meteorological synopsis was created for each dust event in the training, testing, and validation datasets. Following the completion of the database and documentation, the classification details revealed that 88% of the dust events were synoptically driven while mesoscale events were less prevalent in model datasets. Meteorological conditions found such as mixing layer depth and wind velocity had mean values of 645mb and 21kt respectively.With conditions of deep mixed layers and moderate to strong surface winds a mesoscale thunderstorm outflow event was considered and subsequently added to the model training data set to test the impact of additional mesoscale training data. The model was retrained and then qualitatively tested on a sample thunderstorm outflow case that the original model was unable to identify. Preliminary results showed potential that the addition of more mesoscale events included in the training data could help to better identify indistinct and localized dust events.

Connor Welch↗
NASA NTRS2016

Optical Modeling and Polarization Calibration for CMB Measurements with Actpol and Advanced Actpol

The Atacama Cosmology Telescope Polarimeter (ACTPol) is a polarization sensitive upgrade to the Atacama Cosmology Telescope, located at an elevation of 5190 m on Cerro Toco in Chile. ACTPol uses transition edge sensor bolometers coupled to orthomode transducers to measure both the temperature and polarization of the Cosmic Microwave Background (CMB). Calibration of the detector angles is a critical step in producing polarization maps of the CMB. Polarization angle offsets in the detector calibration can cause leakage in polarization from E to B modes and induce a spurious signal in the EB and TB cross correlations, which eliminates our ability to measure potential cosmological sources of EB and TB signals, such as cosmic birefringence. We calibrate the ACTPol detector angles by ray tracing the designed detector angle through the entire optical chain to determine the projection of each detector angle on the sky. The distribution of calibrated detector polarization angles are consistent with a global offset angle from zero when compared to the EB-nulling offset angle, the angle required to null the EB cross-correlation power spectrum. We present the optical modeling process. The detector angles can be cross checked through observations of known polarized sources, whether this be a galactic source or a laboratory reference standard. To cross check the ACTPol detector angles, we use a thin film polarization grid placed in front of the receiver of the telescope, between the receiver and the secondary reflector. Making use of a rapidly rotating half-wave plate (HWP) mount we spin the polarizing grid at a constant speed, polarizing and rotating the incoming atmospheric signal. The resulting sinusoidal signal is used to determine the detector angles. The optical modeling calibration was shown to be consistent with a global offset angle of zero when compared to EB nulling in the first ACTPol results and will continue to be a part of our calibration implementation. The first array of detectors for Advanced ACTPol, the next generation upgrade to ACTPol, will be deployed in 2016.We plan to continue using both techniques and compare them to astrophysical source measurements for the Advanced ACTPol polarization calibration.

Koopman, Brian↗
NASA NTRS1997

On the Directional Dependence and Null Space Freedom in Uncertainty Bound Identification

In previous work, the determination of uncertainty models via minimum norm model validation is based on a single set of input and output measurement data. Since uncertainty bounds at each frequency is directionally dependent for multivariable systems, this will lead to optimistic uncertainty levels. In addition, the design freedom in the uncertainty model has not been utilized to further reduce uncertainty levels. The above issues are addressed by formulating a min- max problem. An analytical solution to the min-max problem is given to within a generalized eigenvalue problem, thus avoiding a direct numerical approach. This result will lead to less conservative and more realistic uncertainty models for use in robust control.

Lim, K. B.↗
DOE OSTI2020

Hidden-charm and bottom tetra- and pentaquarks with strangeness in the hadro-quarkonium and compact tetraquark models

In two recent papers, we used the hadro-quarkonium model to study the properties of hiddencharm and bottom tetraquarks and pentaquarks. Here, we extend the previous results and calculate the masses of heavy-quarkonium-kaon/hyperon systems. We also compute the spectrum of hiddencharm and bottom tetraquarks with strangeness in the compact tetraquark (diquark-antidiquark) model. If heavy-light exotic systems with non-null strangeness content were to be observed experimentally, it might be possible to distinguish among the large variety of available theoretical pictures for tetra- and pentaquark states and, possibly, rule out those which are not compatible with the data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Dark Energy Survey Year 3 results: Curved-sky weak lensing mass map reconstruction

ABSTRACT We present reconstructed convergence maps, mass maps, from the Dark Energy Survey (DES) third year (Y3) weak gravitational lensing data set. The mass maps are weighted projections of the density field (primarily dark matter) in the foreground of the observed galaxies. We use four reconstruction methods, each is a maximum a posteriori estimate with a different model for the prior probability of the map: Kaiser–Squires, null B-mode prior, Gaussian prior, and a sparsity prior. All methods are implemented on the celestial sphere to accommodate the large sky coverage of the DES Y3 data. We compare the methods using realistic ΛCDM simulations with mock data that are closely matched to the DES Y3 data. We quantify the performance of the methods at the map level and then apply the reconstruction methods to the DES Y3 data, performing tests for systematic error effects. The maps are compared with optical foreground cosmic-web structures and are used to evaluate the lensing signal from cosmic-void profiles. The recovered dark matter map covers the largest sky fraction of any galaxy weak lensing map to date.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1992

Computation of magnetic suspension of maglev systems using dynamic circuit theory

Dynamic circuit theory is applied to several magnetic suspensions associated with maglev systems. These suspension systems are the loop-shaped coil guideway, the figure-eight-shaped null-flux coil guideway, and the continuous sheet guideway. Mathematical models, which can be used for the development of computer codes, are provided for each of these suspension systems. The differences and similarities of the models in using dynamic circuit theory are discussed in the paper. The paper emphasizes the transient and dynamic analysis and computer simulation of maglev systems. In general, the method discussed here can be applied to many electrodynamic suspension system design concepts. It is also suited for the computation of the performance of maglev propulsion systems. Numerical examples are presented in the paper.

He, J. L.↗