Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ocean model comparisons”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Reaction path model of the formation of abiotic immiscible hydrocarbon fluids in subducted carbonated serpentinites, Lanzo Massif (Western Italian Alps)

Fluids generated from subducted slabs participate in the cycling of deep carbon in the crust and upper mantle. In these fluids, aqueous carbon species vary in oxidation state between +IV and -IV depending on whether the fluids are oxidizing or reducing, respectively. Most studies of subduction-zone fluids have focused on oxidized carbon species. However, recent studies of natural samples have demonstrated the occurrence of deep, reducing fluids, generated in both subducted oceanic upper mantle and crustal rocks. CH 4 -H 2 -rich fluid inclusions in subducted carbonated serpentinites have demonstrated the existence of abiotic, immiscible, hydrocarbon fluids at upper mantle conditions. To investigate the formation of such immiscible hydrocarbon fluids during the evolution of subducted carbonated serpentinites, we used equilibrium constants from the Deep Earth Water model to carry out predictive chemical mass transfer modeling to simulate the alteration reactions. A novel feature of the models was the inclusion of an immiscible hydrocarbon fluid containing six components (CH 4,f , C 2 H 6,f , C 3 H 8,f , isoC 4 H 10,f , CO 2,f , H 2,f ). This feature enabled prediction of the formation of a separate immiscible fluid in equilibrium with aqueous species and minerals. We developed a predictive reaction path model of invasive H 2,f reacting with carbonated serpentinites and interstitial aqueous fluids for comparison with the natural samples from the Lanzo Massif, western Italian Alps. Over a range of temperatures and pressures, immiscible hydrocarbon fluids formed in association with altered mineral assemblages. Reaction progress caused the transformation of carbonated serpentinites and the formation of clinopyroxene, brucite, graphite, and hydrocarbon fluids, along with changes of pH, logfO 2 , and aqueous species. CH 4,f was the most abundant hydrocarbon species in all the models. The overall results at 2.0 GPa and 400 to 450 °C were consistent with the natural samples from the Lanzo Massif. Interestingly, large amounts of H 2 O formed due to oxidation of H 2 . More hydrocarbons and H 2 O formed in models with lower fluid/rock mass ratios or with more reactant H 2 . Models at different pressure and temperature conditions showed similar results with some variation in the relative stabilities of aragonite, graphite and olivine solid solution, and associated differences in mineral sequences, hydrocarbon fluids, values of aqueous species, and the final log fO 2 and pH. As a result, our models strongly support the laboratory and field evidence that reduction of carbonated serpentinites by infiltrating H 2 fluids can cause the formation of immiscible, abiotic hydrocarbon fluids in subduction zones.

58 GEOSCIENCES↗
DOE OSTI2024

Evaluation of the Planetary Boundary Layer Height From ERA5 Reanalysis With MOSAiC Observations Over the Arctic Ocean

The planetary boundary layer height (PBLH) is a crucial indicator reflecting the region of the atmosphere characterized by continuous turbulence. Here, we use radiosonde and surface meteorological observations (4–7 times per day, year-round measurements) during the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition to derive the PBLH (PBLH MOSAiC ), and further evaluate the PBLH from the ERA5 reanalysis (PBLH ERA5 ). Comparisons between PBLH MOSAiC and PBLH ERA5 from different perspectives reveal that: (a) The overestimation of PBLH ERA5 when the sea ice concentration is >90% is significant with the centered root mean squared error reaching up to 201 m; (b) The difference between the two products is notably pronounced in cold seasons, while it is comparatively diminished in warm seasons; (c) In neutral boundary layers, differences in PBLH ERA5 are larger compared with stable and convective boundary layers. In addition, the analysis of error sources indicates that the bias of PBLH ERA5 is sensitive to the bias of vertical thermal structure and wind speed profiles in ERA5 data sets in all conditions. Finally, we find a Random Forest model effectively reduces the bias of PBLH ERA5 with the index of agreement reaching up to 0.71 in the test data set, while a multiple linear regression demonstrates comparable performance to the Random Forest model.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Modeled and observed properties related to the direct aerosol radiative effect of biomass burning aerosol over the southeastern Atlantic

Biomass burning smoke is advected over the southeastern Atlantic Ocean between July and October of each year. This smoke plume overlies and mixes into a region of persistent low marine clouds. Model calculations of climate forcing by this plume vary significantly in both magnitude and sign. NASA EVS-2 (Earth Venture Suborbital-2) ORACLES (ObseRvations of Aerosols above CLouds and their intEractionS) had deployments for field campaigns off the west coast of Africa in 3 consecutive years (September 2016, August 2017, and October 2018) with the goal of better characterizing this plume as a function of the monthly evolution by measuring the parameters necessary to calculate the direct aerosol radiative effect. Here, this dataset and satellite retrievals of cloud properties are used to test the representation of the smoke plume and the underlying cloud layer in two regional models (WRF-CAM5 and CNRM-ALADIN) and two global models (GEOS and UM-UKCA). The focus is on the comparisons of those aerosol and cloud properties that are the primary determinants of the direct aerosol radiative effect and on the vertical distribution of the plume and its properties. The representativeness of the observations to monthly averages are tested for each field campaign, with the sampled mean aerosol light extinction generally found to be within 20 % of the monthly mean at plume altitudes. When compared to the observations, in all models, the simulated plume is too vertically diffuse and has smaller vertical gradients, and in two of the models (GEOS and UM-UKCA), the plume core is displaced lower than in the observations. Plume carbon monoxide, black carbon, and organic aerosol masses indicate underestimates in modeled plume concentrations, leading, in general, to underestimates in mid-visible aerosol extinction and optical depth. Biases in mid-visible single scatter albedo are both positive and negative across the models. Observed vertical gradients in single scatter albedo are not captured by the models, but the models do capture the coarse temporal evolution, correctly simulating higher values in October (2018) than in August (2017) and September (2016). Uncertainties in the measured absorption Ångstrom exponent were large but propagate into a negligible (<4 %) uncertainty in integrated solar absorption by the aerosol and, therefore, in the aerosol direct radiative effect. Model biases in cloud fraction, and, therefore, the scene albedo below the plume, vary significantly across the four models. The optical thickness of clouds is, on average, well simulated in the WRF-CAM5 and ALADIN models in the stratocumulus region and is underestimated in the GEOS model; UM-UKCA simulates cloud optical thickness that is significantly too high. Overall, the study demonstrates the utility of repeated, semi-random sampling across multiple years that can give insights into model biases and how these biases affect modeled climate forcing. The combined impact of these aerosol and cloud biases on the direct aerosol radiative effect (DARE) is estimated using a first-order approximation for a subset of five comparison grid boxes. A significant finding is that the observed grid box average aerosol and cloud properties yield a positive (warming) aerosol direct radiative effect for all five grid boxes, whereas DARE using the grid-box-averaged modeled properties ranges from much larger positive values to small, negative values. It is shown quantitatively how model biases can offset each other, so that model improvements that reduce biases in only one property (e.g., single scatter albedo but not cloud fraction) would lead to even greater biases in DARE. Across the models, biases in aerosol extinction and in cloud fraction and optical depth contribute the largest biases in DARE, with aerosol single scatter albedo also making a significant contribution.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Effects of different vegetation drag parameterizations on the tidal propagation in coastal marshlands

Vegetation drag is a fundamental quantity directly affecting results for both long- and short-term coastal marsh and geomorphological studies. The vegetation drag in coastal marshland has been modeled by various two-dimensional (2D) and threedimensional (3D) numerical parameterizations. 2D parameterizations treat coastal marshes as bottom roughness elements, while 3D parameterizations resolve the vertically-variable vegetation drag through the water column. However, differences in tidal propagation arising from different drag parameterizations within a single model are largely unknown, and clear guidance on parameterization selection is still missing. In this study, we implemented four vegetation drag parameterizations into the Model for Prediction Across Scales-Ocean (MPAS-O), which include 1) a 2D parameterization using land-cover type-determined Manning’s n (2DLM); 2) a 2D parameterization using vegetation-determined Manning’s n (2DVM); 3) a 3D parameterization for stiff vegetation (3DSV); and 4) a 3D parameterization for flexible vegetation (3DFV). Estimates of the flow resistance effects from these parameterizations were compared using a series of idealized tidal propagation simulations. Given the same tidal condition, flooding depth and flooding distance are the largest in the 2DLM simulations and the smallest in the 3DSV simulations. 2DVM results are the closest to the 2DLM results. 3DFV results are the closest to the average of 2DVM, 3DSV, and 3DFV results. 2DVM and 3DSV results are the least and most sensitive to the vegetation aboveground biomass, respectively. Based on the input data requirement and computational efficiency of each parameterization, a comparison summary is provided to help inform parameterization selection for specific applications. Here, the effects of these parameterizations on coastal geomorphology are further discussed, and the results demonstrate that estimates of the long-term evolution of coastal marshes and coastal morphology depend upon the selection of the vegetation drag parameterization

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Improving GCM Predictability of Mixed-Phase Clouds and Aerosol Interactions at High Latitudes with ARM Observations

The goal of this project is to improve the predictability of mixed-phase clouds and aerosol interactions in the Community Atmosphere Model version 6 (CAM6) through comparison with the ARM observations. There are three main objectives of the proposed study: (1) Improve the representation of ice microphysical processes in mixed-phase clouds; (2) Test the performance of ice microphysics in CESM-CAM6 with the ARM observations in northern and southern high latitudes; and (3) Examine mixed-phase cloud microphysics-aerosol-turbulence-radiation interactions in CESM-CAM6. In this project, we have (1) Improved the representation of ice microphysical processes in mixed-phase clouds in CESM-CAM6 by implementing the marine organic aerosol (MOA) and treating the ice nucleating particles (INPs) from MOA and its impacts on mixed-phase clouds. We made a first attempt to represent different secondary ice production (SIP) mechanisms in a GCM (CESM2-CAM6). We found that misrepresentation of these ice formation processes in global climate models (GCMs) leads to too weak negative cloud feedback over the Southern Ocean (SO) and too high climate sensitivity in the models. In addition to ice formation processes, we improved the treatment of ice depositional growth through the Wegener–Bergeron–Findeisen (WBF) process by considering the subgrid heterogeneous distributions between liquid droplets and ice crystals in mixed-phase clouds; (2) Tested the performance of our improved representations of ice microphysics with the ARM observations at high latitudes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

The development of rainfall retrievals from radar at Darwin

Abstract. The U.S. Department of Energy Atmospheric Radiation Measurement program Tropical Western Pacific site hosted a C-band polarization (CPOL) radar in Darwin, Australia. It provides 2 decades of tropical rainfall characteristics useful for validating global circulation models. Rainfall retrievals from radar assume characteristics about the droplet size distribution (DSD) that vary significantly. To minimize the uncertainty associated with DSD variability, new radar rainfall techniques use dual polarization and specific attenuation estimates. This study challenges the applicability of several specific attenuation and dual-polarization-based rainfall estimators in tropical settings using a 4-year archive of Darwin disdrometer datasets in conjunction with CPOL observations. This assessment is based on three metrics: statistical uncertainty estimates, principal component analysis (PCA), and comparisons of various retrievals from CPOL data. The PCA shows that the variability in R can be consistently attributed to reflectivity, but dependence on dual-polarization quantities was wavelength dependent for 1 10mmh-1. Rainfall estimates during these conditions primarily originate from deep convective clouds with median drop diameters greater than 1.5 mm. An uncertainty analysis and intercomparison with CPOL show that a Colorado State University blended technique for tropical oceans, with modified estimators developed from video disdrometer observations, is most appropriate for use in all cases, such as when 1 10mmh-1 (deeper convective rain).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Moisture sources for precipitation variability over the Arabian Peninsula

Abstract We apply the Lagrangian-based moisture back trajectory method to two reanalysis datasets to determine the moisture sources for wet season precipitation over the Arabian Peninsula, defined as land on the Asian continent to the south of the Turkish border and west of Iran. To accomplish this, we make use of the evaporative source region between 65°W–120°E and 30°S–60°N, which is divided into twelve sub-regions. Our comparison of reanalyses and multiple observations allows us to validate datasets and highlight broad-scale similarities in characteristics, notwithstanding some inconsistencies in the southwest AP. The results indicate north-to-south spatiotemporal heterogeneity in the characteristics of dominant moisture sources. In the north, moisture for precipitation is mainly sourced from midlatitude land and water bodies, such as the Mediterranean and Caspian Seas. Areas further south are dependent on moisture transport from the Western Indian Ocean and parts of the African continent. The El Niño-Southern Oscillation (ENSO) exhibits an overall positive but sub-seasonally varying influence on the precipitation variability over the region, with noticeable moisture anomalies from all major source regions. A significant drying trend exists over parts of the Peninsula, which both reanalyses partially attribute to anomalies in the moisture advection from the Congo Basin and South Atlantic Ocean. However, considerable uncertainty in evaporation trends over the terrestrial evaporative sources in observations warrants additional modeling studies to further our understanding of key processes contributing to the negative trends.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Cloud Phase Simulation at High Latitudes in EAMv2: Evaluation using CALIPSO Observations and Comparison with EAMv1

This study performs a comprehensive evaluation of the simulated cloud phase in the U.S. Department of Energy (DOE) Energy Exascale Earth System Model (E3SM) atmosphere model version 2 (EAMv2) and version 1 (EAMv1). Enabled by the CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation) simulator, EAMv2 and EAMv1 predicted cloud phase is compared against the GCM-Oriented CALIPSO Cloud Product (CALIPSO-GOCCP) at high latitudes where mixed-phase clouds are prevalent. Our results indicate that the underestimation of cloud ice in simulated high-latitude mixed-phase clouds in EAMv1 has been significantly reduced in EAMv2. The increased ice clouds in the Arctic mainly result from the modification on the WBF (Wegner-Bergeron-Findeisen) process in EAMv2. The impact of the modified WBF process is moderately compensated by the low limit of cloud droplet number concentration (CDNC) in cloud microphysics and the new dCAPE_ULL trigger used in deep convection in EAMv2. Moreover, it is found that the new trigger largely contributes to the better cloud phase simulation over the Norwegian Sea and Barents Sea in the Arctic and the Southern Ocean where large errors are found in EAMv1. However, errors in simulated cloud phase in EAMv1, such as the overestimation of supercooled liquid clouds near the surface in both hemispheres and the underestimation of ice clouds over Antarctica, persist in EAMv2. In conclusion, this study highlights the impact of deep convection parameterizations, which has received little attention, on high-latitude mixed-phase clouds, and the importance of continuous improvement of cloud microphysics in climate models for accurately representing mixed-phase clouds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Comparison of Observations and Predictions of Daytime Planetary-Boundary-Layer Heights and Surface Meteorological Variables in the Columbia River Gorge and Basin During the Second Wind Forecast Improvement Project

The second Wind Forecast Improvement Project (WFIP2) is an 18-month field campaign in the Pacific Northwest U.S.A., whose goal is to improve the accuracy of numerical-weather-prediction forecasts in complex terrain. The WFIP2 campaign involved the deployment of a large suite of in situ and remote sensing instrumentation, including eight 915-MHz wind-profiling radars, and surface meteorological stations. The evolution and annual variability of the daytime convective planetary-boundary-layer (PBL) height is investigated using the wind-profiling radars. Three models with different horizontal grid spacing are evaluated: the Rapid Refresh, the High-Resolution Rapid Refresh, and its nested version. The results are used to assess errors in the prediction of PBL height within the experimental and control versions of the models, with the experimental versions including changes and additions to the model parametrizations developed during the field campaign, and the control version using the parametrizations present in the National Oceanic and Atmospheric Administration/National Centers for Environmental Prediction operational version of the models at the start of the project. Results show that the high-resolution models outperform the low-resolution versions, the experimental versions perform better compared with the control versions, model PBL height estimations are more accurate on cloud-free days, and model estimates of the PBL height growth rate are more accurate than model estimates of the rate of decay. Finally, using surface sensors, we assess surface meteorological variables, finding improved surface irradiance and, to a lesser extent, improved 2-m temperature in the experimental version of the model.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Attribution of Snowpack Errors to Simulated Temperature and Precipitation in E3SMv1 Over the Contiguous United States

Abstract Snow water equivalent (SWE), temperature, and precipitation biases and trends are evaluated in the atmosphere‐land simulations of the Energy Exascale Earth System Model version 1 (E3SMv1) in comparison to the Community Earth System Model version 2 (CESM2) and two other models using the ground measurement‐based University of Arizona (UA) snow product. SWE, temperature, and precipitation biases are highest in magnitude in the Western contiguous United States (CONUS). SWE errors are attributed to temperature and precipitation through multiple linear regressions of normalized errors, the coefficients of which represent the sensitivities to temperature and precipitation errors. SWE errors are more sensitive to temperature errors throughout the CONUS. Model SWE and temperature trends are generally opposite from UA product trends in the Western CONUS. SWE trend errors are also attributed to temperature and precipitation trend errors using multiple linear regressions of normalized trend errors. SWE trend errors are more sensitive to those of precipitation at higher elevations (>1,500 m) in the Western CONUS in these simulations. Thus, the sensitivity to temperature and precipitation differ for SWE errors and its trend errors. Furthermore, the SWE trend errors are more sensitive to temperature and precipitation in the atmosphere‐ocean coupled simulations in which the atmosphere‐land is coupled to an active ocean model. These results suggest that both errors in simulated temperature and precipitation contribute to SWE errors.

Meteorology & Atmospheric Sciences↗
DOE OSTI2021

Data-Driven Exploration of Climate Attractor Manifolds For Long-Term Predictability

Focal Area: This white paper responds to Focal Area 3. We seek to gain insight into decadal-scale climate predictability by applying novel manifold-finding probabilistic AI techniques to the complex data produced by Earth System models (ESMs) such as E3SM. The associated portfolio of research activities leverages DOE’s asset mix of HPC platforms, climate expertise, climate simulation codes, and AI expertise. Science Challenge: Climate and climate models are dynamical systems exhibiting properties that are interpretable through chaos theory. The theory contains an important concept that is relevant to multi-decade-scale climate prediction: a chaotic attractor. While the space containing all the possible states of the Earth’s atmosphere and ocean, the possible weather, is large, the realized states tend to stay near the smaller-dimensioned attractor. This behavior is responsible for the “order behind the irregularity” [1] of climate phenomena. Climate change can be thought of as a change in the properties of the attractor, and predicting the climate over years to decades is equivalent to predicting how those properties will change. To date, the attractor has been a useful conceptual tool, but has not been amenable to direct characterization. A new development is the advent of efficient high-dimensional manifold-finding probabilistic AI techniques, which permit a data-driven characterization of the ESM attractor and its probability distribution over weather states. Such a characterization would result in a natural dimensional reduction — a “non-linear Principal Components Analysis (PCA) adapted to climate simulation data” — leading to important advances in scenario-based long-term climate prediction, long-term prediction of water cycle extremes, ESM verification, inter-model comparison, and process model development.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

ARM data-oriented metrics and diagnostics package for climate model evaluation (ARM-DIAGS-V3) version 3

A Python-based metrics and diagnostics package is currently being developed by the ARM Infrastructure Team at Lawrence Livermore National Laboratory to facilitate the use of long-term high frequency measurements from the ARM program in evaluating the regional climate simulation of clouds, radiation, precipitation, and aerosols. This metrics and diagnostics package computes climatological means of targeted climate model simulation and generates tables and plots for comparing the model simulation with ARM observational data. The CMIP model data sets are also included in the package to enable model inter-comparison as demonstrated in Zhang et al. (2018) and Zhang et al. (2020). The mean of the CMIP model can be served as a reference for individual models. Basic performance metrics are computed to measure the accuracy of mean state and variability of climate models. The evaluated physical quantities include cloud fraction, temperature, relative humidity, cloud liquid water path, total column water vapor, precipitation, sensible and latent heat fluxes, aerosol optical depth, and radiative fluxes, with plan to extend to more fields, such as the evaluation of model simulated aerosol physicochemical properties and cloud microphysics properties. Process-oriented diagnostics focusing on aerosol, cloud, and precipitation-related phenomena are also being developed for the evaluation and development of specific model physical parameterizations. In addition to the Southern Great Plains (SGP), North Slope of Alaska (NSA) and Tropical Western Pacific (TWP) atmospheric observatories in the ARMDIAGS version 2.0, the version 3.0 package have extended to the data collected at the ARM Eastern North Atlantic (ENA) atmospheric observatory and the Observation and Modeling of the Green Ocean Amazon (GOAMAZON) field campaign. The metrics and diagnostics package are currently built upon standard Python libraries and additional Python packages developed by DOE (CDAT). The ARM metrics and diagnostic package is available publicly with the hope that it can serve as an easy entry point for climate modelers to compare their models with ARM data. In this report, we first provide an overview of major metrics in section 2. The input data, which constitutes the core content of the metrics and diagnostics package, is summarized in section 3. A user's guide documenting the workflow/structure of the version 3.0 codes and including step-by-step instruction for running the package is described in section 4.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Highly Accurate Experimental Heave Decay Tests with a Floating Sphere: A Public Benchmark Dataset for Model Validation of Fluid–Structure Interaction

Highly accurate and precise heave decay tests on a sphere with a diameter of 300 mm were completed in a meticulously designed test setup in the wave basin in the Ocean and Coastal Engineering Laboratory at Aalborg University, Denmark. The tests were dedicated to providing a rigorous benchmark dataset for numerical model validation. The sphere was ballasted to half submergence, thereby floating with the waterline at the equator when at rest in calm water. Heave decay tests were conducted, wherein the sphere was held stationary and dropped from three drop heights: a small drop height, which can be considered a linear case, a moderately nonlinear case, and a highly nonlinear case with a drop height from a position where the whole sphere was initially above the water. The precision of the heave decay time series was calculated from random and systematic standard uncertainties. At a 95% confidence level, uncertainties were found to be very low—on average only about 0.3% of the respective drop heights. Physical parameters of the test setup and associated uncertainties were quantified. A test case was formulated that closely represents the physical tests, enabling the reader to do his/her own numerical tests. The paper includes a comparison of the physical test results to the results from several independent numerical models based on linear potential flow, fully nonlinear potential flow, and the Reynolds-averaged Navier–Stokes (RANS) equations. A high correlation between physical and numerical test results is shown. The physical test results are very suitable for numerical model validation and are public as a benchmark dataset.

42 ENGINEERING↗
DOE OSTI2026

Thermodynamics-guided machine learning model for predicting convective boundary layer height and its multi-site applicability

Accurate estimation of convective boundary layer height (CBLH) is vital for weather, climate, and air quality modeling. Machine learning (ML) shows promise in CBLH prediction, but input parameter selection often lacks physical grounding, limiting generalizability. This study introduces a novel ML framework for CBLH prediction, integrating thermodynamic constraints and the diurnal CBLH cycle as an implicit physical guide. Boundary layer growth is modeled as driven by surface heat fluxes and atmospheric heat absorption represented with the low tropospheric stability, using the diurnal cycle as input and output. TPOT and AutoKeras are employed to select optimal models, validated against Doppler lidar-derived CBLH data, achieving an R 2 of 0.84 across untrained years. Comparisons of eddy covariance (ECOR) and energy balance Bowen ratio (EBBR) flux measurements show the same prediction capability. Models trained on the ARM SGP C1 site with ECOR data and tested at E37 and E39 yield R 2 values of 0.79 and 0.81, respectively, demonstrating their adaptability. The ML model trained with all sites' data slightly enhances the performance compared with ML models trained over single-site data. The interquartile range for predicted CBLH is consistently narrower than that for DL-derived CBLH, reflecting lower variability in predicted CBLH compared to DL-derived CBLH, which is influenced by additional factors, which are not well represented with the model inputs. The model's generalizability across multiple sites at the ARM SGP site demonstrates its potential for transfer to greater distances, offering a scalable approach for enhancing boundary layer parameterization in atmospheric models.

Chu, Yufei [Stony Brook Univ., NY (United States)]↗
DOE OSTI2021

Modeling Terrestrial Dissolved Organic Carbon Loading to Western Arctic Rivers

The mobilization and land-to-ocean transfer of dissolved organic carbon (DOC) in Arctic watersheds is intricately linked with the region's climate and water cycle, and furthermore at risk of changes from climate warming and associated impacts. This study quantifies model-simulated estimates of runoff, surface and active layer leachate DOC concentrations and loadings to western Arctic rivers, specifically for basins that drain into coastal waters between and including the Yukon and Mackenzie Rivers. Model validation leverages data from other field measurements, synthesis studies, and modeling efforts. The simulations effectively quantify DOC leaching in surface and subsurface runoff and broadly capture the seasonal cycle in DOC concentration and mass loadings reported from other studies that use river-based measurements. A marked east-west gradient in simulated spring and summer DOC concentrations of 24 drainage basins on the North Slope of Alaska is captured by the modeling, consistent with independent data derived from river sampling. Simulated loadings for the Mackenzie and Yukon show reasonable agreement with estimates of DOC export for annual totals and four of the six seasonal comparisons. Nearly equivalent loading occurs to rivers which drain north to the Beaufort Sea and west to the Bering and Chukchi Seas. The modeling framework provides a basis for understanding carbon export to coastal waters and for assessing impacts of hydrological cycle intensification and permafrost thaw with ongoing warming in the Arctic.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

A Vertically Resolved MSE Framework Highlights the Role of the Boundary Layer in Convective Self-Aggregation

Abstract Convective self-aggregation refers to a phenomenon in which random convection can self-organize into large-scale clusters over an ocean surface with uniform temperature in cloud-resolving models. Previous literature studies convective aggregation primarily by analyzing vertically integrated (VI) moist static energy (MSE) variance. That is the global MSE variance, including both the local MSE variance at a given altitude and the covariance of MSE anomalies between different altitudes. Here we present a vertically resolved (VR) MSE framework that focuses on the local MSE variance to study convective self-aggregation. Using a cloud-resolving simulation, we show that the development of self-aggregation is associated with an increase of local MSE variance, and that the diabatic and adiabatic generation of the MSE variance is mainly dominated by the boundary layer (BL; the lowest 2 km). The results agree with recent numerical simulation results and the available potential energy analyses showing that the BL plays a key role in the development of self-aggregation. Additionally, we find that the lower free troposphere (2–4 km) also generates significant MSE variance in the first 15 days. We further present a detailed comparison between the global and local MSE variance frameworks in their mathematical formulation and diagnostic results, highlighting their differences.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Large Eddy Simulation of the Diurnal Cycle of Shallow Convection in the Central Amazon

Climate models often face challenges in accurately simulating the daily precipitation cycle over tropical land areas, particularly in the Amazon. One contributing factor may be the incomplete representation of the diurnal evolution of shallow cumulus (ShCu) clouds. This study aimed to enhance the understanding of the diurnal cycles of ShCu clouds—from formation to maturation and dissipation—over the Central Amazon (CAMZ). Using observational data from the Green Ocean Amazon 2014 (GoAmazon) campaign and large eddy simulation (LES) modeling, we analyzed the diurnal cycles of six selected pure ShCu cases and their composite behavior. Our results revealed a well-defined cycle, with cloud formation occurring between 10 and 11 local time (LT), maturity from 13 to 15 LT, and dissipation by 17–18 LT. The vertical extent of the liquid water mixing ratio and the intensity of the updraft mass flux were closely associated with increases in turbulent kinetic energy (TKE), enhanced buoyancy flux within the cloud layer, and reduced large-scale subsidence. We further analyzed the diurnal cycles of the convective available potential energy (CAPE), the convective inhibition (CIN), the Bowen ratio (BR), and the vertically integrated TKE in the mixed layer (ITKE-ML), exploring their relationships with the cloud base mass flux (Mb) and cloud depth across the six ShCu cases. ITKE-ML and Mb exhibited similar diurnal trends, peaking at approximately 14–15 LT. However, no consistent relationships were found between CAPE (or BR) and Mb. Similarly, comparisons of the cloud depth with CAPE, BR, ITKE-ML, CIN, and Mb revealed no clear relationships. Smaller ShCu clouds were sometimes linked to higher CAPE and lower CIN. It is important to emphasize that these findings are preliminary and based on a limited sample of ShCu cases. Further research involving an expanded dataset and more detailed analyses of the TKE budget and synoptic conditions is necessary. Such efforts would yield a more comprehensive understanding of the factors influencing ShCu clouds’ vertical development.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

The impact of cloud microphysics and ice nucleation on Southern Ocean clouds assessed with single-column modeling and instrument simulators

Abstract. Supercooled liquid clouds are common at higher latitudes (especially over the Southern Ocean) and are critical for constraining climate projections. We take advantage of the Macquarie Island Cloud and Radiation Experiment (MICRE) to perform an analysis of observed and simulated cloud processes over the Southern Ocean in a region and season dominated by supercooled liquid clouds. Using a single-column version of the European Centre for Medium-Range Weather Forecasts (ECMWF) Integrated Forecast System (IFS), we compare two different cloud microphysical schemes to ground-based observations of cloud, precipitation, and radiation over a 2.5-month period (1 January–17 March 2017). Both schemes are able to reproduce aspects of the cloud and radiation observations during MICRE to within the uncertainty of the data when the thermodynamic profile is prescribed with relaxation. There are differences in water mass and representation of reflectivity between the schemes. A sensitivity study of the cloud microphysics schemes, one a bulk one-moment scheme and the other a two-moment scheme with prediction of mass and number, indicates that several key processes create differences between the schemes. Surface radiative fluxes and total water path are highly sensitive to the formation and fall speed of precipitation. The prediction of hydrometeor number with the two-moment scheme yields a better comparison with observed reflectivity and radiative fluxes, despite predicting higher liquid water contents than observed. With the two-moment scheme, we are also able to test the sensitivity of the results to the input of liquid cloud condensation nuclei (CCN) and ice nuclei (IN). The cloud properties and resulting radiative effects are found to be sensitive to the CCN and IN concentrations. More CCN and IN increase liquid and ice water paths, respectively. Thus, both the dynamic environment and aerosols, integrated through the cloud microphysics, are important for properly representing Southern Ocean cloud radiative effects.

58 GEOSCIENCES↗