Search NASA⌕ Search

SEARCH · Search NASA

Results for “Optoelectronics components”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Disentangling Oxygen and Water Vapor Effects on Optoelectronic Properties of Monolayer Tungsten Disulfide

By understanding how the environmental composition impacts the optoelectronic properties of transition metal dichalcogenide monolayers, we demonstrate that simple photoluminescence (PL) measurements of tungsten disulfide (WS 2 ) monolayers can differentiate relative humidity environments. In this paper, we examine the PL and photoconductivity of chemical vapor deposition grown WS 2 monolayers under three carefully controlled environments: inert gas (N 2 ), dry air (O 2 in N 2 ), and humid nitrogen (H 2 O vapor in N 2 ). The WS 2 PL is measured as a function of 532 nm laser power and exposure time and can be decomposed into the exciton, trion, and lower energy state(s) contributions. Under continuous illumination in either O 2 or H 2 O vapor environment, we find dramatic (and reversible) increases in PL intensity relative to the PL in an inert environment. The PL bathochromically shifts in an O 2 environment and is dominated by increased trion emission and diminished exciton emission. In contrast, the WS 2 PL increase in a H 2 O environment results from an overall increase in emission from all spectral components where the exciton contribution dominates. The drastic increases in PL are anticorrelated with corresponding decreases in photoconductivity, as measured by time-resolved microwave conductivity. The results suggest that both O 2 and H 2 O react photochemically with the WS 2 monolayer surface, modifying the optoelectronic properties, but do so via distinct pathways. Thus, we use these optoelectronic differences to differentiate the amount of humidity in the air, which we show with 0%, 40%, and 80% relative humidity environments. This deeper understanding of how ambient conditions impact WS 2 monolayers enables novel humidity sensors as well as a better understanding of the correlation between TMDC surface chemistry, light emission, and photoconductivity. Moreover, these WS 2 measurements highlight the importance of considering the impact of the local environment on reported results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Final LDRD report :

The distinction between electricity and fuel use in analyses of global power consumption statistics highlights the critical importance of establishing efficient synthesis techniques for solar fuels those chemicals whose bond energies are obtained through conversion processes driven by solar energy. Photoelectrochemical (PEC) processes show potential for the production of solar fuels because of their demonstrated versatility in facilitating optoelectronic and chemical conversion processes. Tandem PEC-photovoltaic modular configurations for the generation of hydrogen from water and sunlight (solar water splitting) provide an opportunity to develop a low-cost and efficient energy conversion scheme. The critical component in devices of this type is the PEC photoelectrode, which must be optically absorptive, chemically stable, and possess the required electronic band alignment with the electrochemical scale for its charge carriers to have sufficient potential to drive the hydrogen and oxygen evolution reactions. After many decades of investigation, the primary technological obstacle remains the development of photoelectrode structures capable of efficient conversion of light with visible frequencies, which is abundant in the solar spectrum. Metal oxides represent one of the few material classes that can be made photoactive and remain stable to perform the required functions.

Kronawitter, Coleman X.↗

Composite Nature of Layered Hybrid Perovskites: Assessment on Quantum and Dielectric Confinements and Band Alignment

Layered hybrid organic–inorganic perovskites (HOPs) have re-emerged as potential technological solutions for next-generation photovoltaic and optoelectronic applications. Their two-dimensional (2D) nature confers them a significant flexibility and results in the appearance of quantum and dielectric confinements. Such confinements are at the origin of their fascinating properties, and understanding them from a fundamental level is of paramount importance for optimization. Here, we provide an in-depth investigation of band alignments of 2D HOP allowing access to carriers’ confinement potentials. 2D HOPs are conceptualized as composite materials in which pseudoinorganic and -organic components are defined. In this way, computational modeling of band alignments becomes affordable using first-principles methods. First, we show that the composite approach is suitable to study the position-dependent dielectric profiles and enables clear differentiation of the respective contributions of inorganic and organic components. Then we apply the composite approach to a variety of 2D HOPs, assessing the impact on the confinement potentials of well and barrier thickness, of the nature of the inorganic well, and of structural transitions. Using the deduced potentials, we further discuss the limitations of the effective mass approximation, scrutinizing the electronic properties of this family of composite materials. Our simulations demonstrate type-I dominant band alignment in 2D HOPs. Finally, we outline design principles on band alignment toward achieving specific optoelectronic properties. Furthermore, we present alternative theoretical methods to inspect the properties of 2D hybrid perovskites and expect that the composite approach will be applicable to other classes of layered materials.

36 MATERIALS SCIENCE↗

The Future of Renewable Energy Generation: Photovoltaic Materials

There are myriad ways to harness solar energy, including, but not limited to: solar thermal, solar fuels, and photovoltaics (PV). Across the portfolio of solar energy technologies, PV is unique in that collected photons are directly converted to electricity. Traditionally, the dominant materials in PV are also the dominant semiconductor and optoelectronic materials. The cost of solar energy from PV is a product of a complex combination of non-material related factors, known as soft costs, e.g., permitting, zoning, and of balance-of-systems (BOS) costs, like inverters or other components needed to utilize cells and modules. While the soft costs are due to administrative/regulatory concerns, BOS costs are driven by details of cell/module fabrication, mounting, power electronics, and other concerns, which touch on a range of basic material science issues. There is some overlap of BOS and soft cost, as a lighter weight solar panel can reduce installations costs, as an example. At the PV-system level, the materials considerations span both electronic and structural components. The focus of this paper is the solar cell, which is the minimum operational unit device that converts light into electricity.

30 DIRECT ENERGY CONVERSION↗

Directed Energy Transfer through DNA-templated J-aggregates

Strongly coupled molecular dye aggregates have unique optoelectronic properties that often resemble those of light harvesting complexes found in nature. The exciton dynamics in coupled dye aggregates could enhance the long-range transfer of optical excitation energy with high efficiency. In principle, dye aggregates could serve as important components in molecular-scale photonic devices, however, rational design of these coupled dye aggregates with precise control over their organization, interactions and dynamics remains a challenge. DNA nanotechnology has recently been used to build an excitonic circuit by organizing pseudoisocyanine (PIC) dyes forming J-aggregates on the templates of poly(dA)-poly(dT) DNA duplexes. Here, the excitonic properties of the PIC J-aggregates on DNA are characterized spectroscopically in detail using poly(dA)-poly(dT) tract lengths of 24 and 48 base pairs. The excitonic properties of these DNA templated dye assemblies depend on the length and sequence of the DNA template. The incorporation of a gap of two GC base pairs between two segments of poly(dA)-poly(dT) DNA markedly reduces the delocalization of excitation in the J-aggregates.Using a quantum dot (QD) as the light absorber and energy donor and using Alexa Fluor 647 (AF647) as the energy acceptor, with a DNA-templated J-aggregate in between, significant energy transfer from QD to AF647 is observed over a distance far longer than possible without the aggregate bridge. By comparing the efficiency of energy transfer through a continuous J-aggregate with the efficiency when the aggregate has a discontinuity in the middle, the effects of energy transfer within the aggregate bridge between the donor and acceptor are evaluated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular mechanism of reflectin’s tunable biophotonic control: Opportunities and limitations for new optoelectronics

Discovery that reflectin proteins fill the dynamically tunable Bragg lamellae in the reflective skin cells of certain squids has prompted efforts to design new reflectin-inspired systems for dynamic photonics. But new insights into the actual role and mechanism of action of the reflectins constrain and better define the opportunities and limitations for rationally designing optical systems with reflectin-based components. We and our colleagues have discovered that the reflectins function as a signal-controlled molecular machine, regulating an osmotic motor that tunes the thickness, spacing, and refractive index of the tunable, membrane-bound Bragg lamellae in the iridocytes of the loliginid squids. The tunable reflectin proteins, characterized by a variable number of highly conserved peptide domains interspersed with positively charged linker segments, are restricted in intra- and inter-chain contacts by Coulombic repulsion. Physiologically, this inhibition is progressively overcome by charge-neutralization resulting from acetylcholine (neurotransmitter)-induced, site-specific phosphorylation, triggering the simultaneous activation and progressive tuning of reflectance from red to blue. Details of this process have been resolved through in vitro analyses of purified recombinant reflectins, controlling charge-neutralization by pH-titration or mutation as surrogates for the in vivo phosphorylation. Results of these analyses have shown that neutralization overcoming the Coulombic inhibition reversibly and cyclably triggers condensation and secondary folding of the reflectins, with the emergence of previously cryptic, phase-segregated hydrophobic domains enabling hierarchical assembly. This tunable, reversible, and cyclable assembly regulates the Gibbs-Donnan mediated osmotic shrinking or swelling of the Bragg lamellae that tunes the brightness and color of reflected light. Our most recent studies have revealed a direct relationship between the extent of charge neutralization and the size of the reflectin assemblies, further explaining the synergistic effects on the intensity and wavelength of reflected light. Mutational analyses show that the “switch” controlling reflectins’ structural transitions is distributed along the protein, while detailed comparisons of the sequences and structures of the recently evolved tunable reflectins to those of their ancestral, non-tunable homologs are helping to identify the specific structural determinants governing tunability.

47 OTHER INSTRUMENTATION↗

In-situ Photophysical Monitors and Corrective Algorithms for Photovoltaic Film Deposition and Rapid Thermal Processing in Scalable Roll-to-Roll Manufacturing

This project evaluated three photophysics-based approaches for in situ process monitoring of the scalable deposition of perovskite photovoltaic films. Based on stakeholder input and the results of laboratory trials and literature analysis, two techniques, angle resolved elastic light scattering (ARLS) and time-resolved photoluminescence (TRPL) were prototyped and demonstrated with a mixture of simulation, offline and online tests. Also, a hybrid gas flow and humidity control enclosure was constructed and demonstrated to stabilize the ambient conditions around the slot die deposition process and were demonstrated to meet the target humidity control in situ. Due in part to a delayed start and COVID-related lab restrictions and personnel changes, some of the milestones were not met. In spite of these challenges, however, both techniques were prototyped through several iterations and demonstrated significant promise for rapid in line perovskite characterization within the targeted characterization time windows and these techniques are under further development for use in DE-FOA000235:2357-1586. The TRPL system was fully mounted and demonstrated on the scaled slot die roll to roll and sheet coating systems at the Washington Clean Energy Testbeds (WCET). Motivated by significant internal and stakeholder interest, the successful prototyping achieved here, the ongoing need for in-situ characterization for the scale-up of perovskite manufacturing, and the benefits of in situ photophysical characterization for future funded process development research, we are continuing with the principle aims of the project to develop effect in situ photophysical probes for fast analysis of the optoelectronic and structural quality of sheet based and roll to roll process perovskites. TRPLS and ARLS probes proposed in the project are to be completed with external support from the Washington Research Foundation at the WCET. We are currently actively engaged in the acquisition of components and plan to complete and test the probes within three months. It is our intention that these probes will then be used in ongoing perovskite development with our research and commercialization partners including First Solar and other member of the US MAP consortium in future funded development work.

14 SOLAR ENERGY↗

Computational protein design: Advances in the design and redesign of biomolecular nanostructures

Computational protein design facilitates the continued development of methods for the design of biomolecular structure, sequence and function. Recent applications include the design of novel protein sequences and structures, proteins incorporating nonbiological components, protein assemblies, soluble variants of membrane proteins, and proteins that modulate membrane function.

36 MATERIALS SCIENCE↗

Millimeter-wave home area network prospect with cost-effective RoF links

The growth towards the millimeter-wave band in the home area networks (HAN) leads to high data rate transmission to satisfy the new user services. Unfortunately, the transmission coverage in this band is limited to short distances because of the strong air absorption and obstacles such as walls. The effort is then focused on the extension of the network coverage of the wireless link in this band. Solutions based on multiple connected access points to optical fibers are useful methods to ensure wireless connectivity to the entire home. For HAN applications, radio-over-fiber (RoF) using intensity modulation and direct detection technique is the mostly favorite technology for the transmission of a broadband wireless signal because dealing with a cost-effective solution. We investigate in this paper the performance of such RoF-wireless architecture with low-cost optoelectronic modules through the error vector magnitude (EVM) metric. The RoF links investigated are a directly modulated VCSEL with integrated photoreceiver module, an electroabsorption-modulated laser with PIN photodiode and a Mach–Zehnder Modulator with PIN photodiode. A simulation approach based on equivalent electrical circuit models of photonic components is developed in ADS (Advanced Design System) by using a co-simulation technique that combines both analog and digital signals. The downlink channel of the complete transmission system including wireless channel and frequency conversion circuits to millimeter-wave (mm-wave) band is studied by simulation. The obtained results of EVM show good performances of cost-effective links with QPSK and 16-QAM modulation over a dynamic range of 15 dB.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Making the most of your electrons: Challenges and opportunities in characterizing hybrid interfaces with STEM

Inspired by the unique architectures composed of hard and soft materials in natural and biological systems, synthetic hybrid structures and associated hard-soft interfaces have recently evoked significant interest. Soft matter is typically dominated by structural fluctuations even at room temperature, while hard matter is governed by rigid mechanical behavior. This dichotomy offers considerable opportunities to leverage the disparate properties offered by these components across a wide spectrum spanning from basic science to engineering insights with significant technological overtones. Such hybrid structures, which include polymer nanocomposites, DNA functionalized nanoparticle superlattices, and metal organic frameworks to name a few, have delivered promising insights into the technologically relevant applications such as catalysis, environmental remediation, optoelectronics, and medicine. The interfacial structure between the hard and soft phases demonstrates features across a variety of length scales and often strongly influence the functionality of hybrid systems. While scanning/transmission electron microscopy (S/TEM) has proven to be a valuable tool for acquiring intricate molecular and nanoscale details of these interfaces, the unusual nature of hybrid composites presents a suite of challenges that make assessing or establishing structure–property relationships especially difficult. There are additional considerations at all stages of sample analysis from preparing electron-transparent samples to obtaining sufficient contrast to resolve the interface between dissimilar materials given the dose sensitivity of soft materials. Here, we discuss each of these challenges and supplement a review of recent developments in the field with additional experimental investigations and simulations to present solutions for attaining a nano or molecular-level understanding of these interfaces. These solutions present a host of opportunities for investigating the role interfaces play in this unique class of functional materials.

36 MATERIALS SCIENCE↗

Decoding ultrafast polarization responses in lead halide perovskites by the two-dimensional optical Kerr effect

Significance Optoelectronic devices, such as photovoltaics or light-emitting diodes, are based on the interaction of light with charges in the active material. Lead halide perovskites (LHPs) have emerged as excellent materials for optoelectronics, but mysteries remain as to how these materials interact with light. Here, we develop a spectroscopic method to observe the nearly instantaneous responses of LHPs to propagating light fields. This method has allowed us to precisely trace a nonlinear material response resulting from the mixing of different light components overtaking each other during propagation. The resulting oscillatory signals could be easily confused with collective motions of ions or molecules, but are quantitatively accounted by strong nonlinear mixing and polarization-dressed light propagation in single-crystal LHPs.

14 SOLAR ENERGY↗

Origin of Electronic and Optical Trends in Ternary In2O3(ZnO)n Transparent Conducting Oxides (n = 1, 3, 5): Hybrid Density Functional Theory Calculations

Ternary oxides formed from zinc and indium have demonstrated potential for commercial optoelectronic applications. We present state-of-the-art hybrid density functional theory calculations for Zn-poor and Zn-rich compositions of the crystalline In{sub 2}O{sub 3}(ZnO){sub n} compounds. We reveal the origin of the redshift in optical transitions compared to the two component oxides: symmetry forbidden band-edge transitions in In{sub 2}O{sub 3} are overcome on formation of the superlattices, with Zn-O contributions to the top of the valence band. Increasing n results in the localization of the conduction-band minimum on the In-O networks. This enhanced localization explains why Zn-poor compounds (lower n) exhibit optimal conductivity.

36 MATERIALS SCIENCE↗

Theoretical Study of High Harmonic Generation in Monolayer NbSe 2

High harmonic generation (HHG) is a powerful probe of electron dynamics on attosecond to femtosecond time scales and has been successfully used to detect electronic and structural changes in solid-state quantum materials, including transition-metal dichalcogenides (TMDs). Among TMDs, bulk NbSe 2 exhibits charge density wave (CDW) order below 33 K and becomes superconducting below 7.3 K. Monolayer NbSe 2 also has superconducting and CDW behavior and is therefore interesting as a material whose different structural and electronic properties could be probed via HHG. Here, we predict the HHG response of the pristine 2H and CDW phases of monolayer NbSe 2 using real-time time-dependent density functional theory under the application of a simulated laser pulse excitation. We find that due to the lack of inversion symmetry in both monolayer phases, it is possible to excite even harmonics and that the even harmonics appear as the transverse components of the current response under excitations polarized along the zigzag direction of the monolayer, while odd harmonics arise from the longitudinal current response in all excitation directions. This suggests that the even and odd harmonic responses can be controlled via the polarization of the probing field, opening an avenue for potentially useful applications in optoelectronic devices.

36 MATERIALS SCIENCE↗

Engineering the radiative dynamics of thermalized excitons with metal interfaces

As a platform for optoelectronic devices based on exciton dynamics, monolayer transition metal dichalcogenides (TMDCs) are often placed near metal interfaces or inside planar cavities. While the radiative properties of point dipoles at metal interfaces has been studied extensively, those of excitons, which are delocalized and exhibit a temperature-dependent momentum distribution, lack a thorough treatment. Here, we analyze the emission properties of excitons in TMDCs near planar metal interfaces and explore their dependence on exciton center-of-mass momentum, transition dipole orientation, and temperature. Defining a characteristic energy scale k B T c = ($\hbar k$) 2 /2m (k being the radiative wavevector and m the exciton mass), we find that at temperatures T $\gg$ T c and low densities where the momentum distribution can be characterized by Maxwell-Boltzmann statistics, the modified emission rates (normalized to free space) behave similarly to point dipoles. This similarity in behavior arises due to the broad nature of wavevector components making up the exciton and point dipole emission. On the other hand, the narrow momentum distribution of excitons for T < T c can result in significantly different emission behavior as compared to point dipoles. These differences can be further amplified by considering excitons with a Bose Einstein distribution at high phase space densities, such as in a condensate phase. We find suppression or enhancement of emission relative to the point dipole case by several orders of magnitude. These insights can help optimize the performance of optoelectronic devices that incorporate 2D semiconductors near metal electrodes and can inform future studies of exciton radiative dynamics at low temperatures. Additionally, these studies show that nanoscale optical cavities are a viable pathway to generating long-lifetime exciton states in TMDCs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Superabsorbing, Artificial Metal Films Constructed from Semiconductor Nanoantennas

In 1934, Wilhelm Woltersdorff demonstrated that the absorption of light in an ultrathin, freestanding film is fundamentally limited to 50%. He concluded that reaching this limit would require a film with a real-valued sheet resistance that is exactly equal to R = η/2 ≈ 188.5Ω/$\square$, where η=√μ 0 /ϵ 0 is the impedance of free space. This condition can be closely approximated over a wide frequency range in metals that feature a large imaginary relative permittivity ε r ", that is, a real-valued conductivity σ = ε 0 ε r "ω. A thin, continuous sheet of semiconductor material does not facilitate such strong absorption as its complex-valued permittivity with both large real and imaginary components preclude effective impedance matching. Here, we show how a semiconductor metafilm constructed from optically resonant semiconductor nanostructures can be created whose optical response mimics that of a metallic sheet. Because of this reason, the fundamental absorption limit mentioned above can also be reached with semiconductor materials, opening up new opportunities for the design of ultrathin optoelectronic and light harvesting devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Light-induced electron paramagnetic resonance evidence of charge transfer in electrospun fibers containing conjugated polymer/fullerene and conjugated polymer/fullerene/carbon nanotube blends

Electrospun sub-micron fibers containing conjugated polymer (poly(3-hexylthiophene), P3HT) with a fullerene derivative, phenyl-C61-butyric acid methylester (PCBM) or a mixture of PCBM and single-walled carbon nanotubes (SWCNTs) were studied by light-induced electron paramagnetic resonance spectroscopy. The results provide experimental evidence of electron transfer between PCBM and P3HT components in both fiber systems and suggest that the presence of a dispersing block-copolymer, which acts via physical adsorption onto the PCBM and SWCNT moieties, does not prevent electron transfer at the P3HT-PCBM interface. These findings suggest a research perspective towards utilization of fibers of functional nanocomposites in fiber-based organic optoelectronic and photovoltaic devices. The latter can be developed in the textile-type large area photovoltaics or individual fiber-based solar cells that will broaden energy applications from macro-power tools to micro-nanoscale power conversion devices and smart textiles.

36 MATERIALS SCIENCE↗

Simulating charged defects at database scale

Point defects have a strong influence on the physical properties of materials, often dominating the electronic and optical behavior in semiconductors and insulators. The simulation and analysis of point defects is, therefore, crucial for understanding the growth and operation of materials, especially for optoelectronics applications. In this work, we present a general-purpose Python framework for the analysis of point defects in crystalline materials as well as a generalized workflow for their treatment with high-throughput simulations. The distinguishing feature of our approach is an emphasis on a unique, unit cell, structure-only, definition of point defects which decouples the defect definition, and the specific supercell representation used to simulate the defect. This allows the results of first-principles calculations to be aggregated into a database without extensive provenance information and is a crucial step in building a persistent database of point defects that can grow over time, a key component toward realizing the idea of a “defect genome” that can yield more complex relationships governing the behavior of defects in materials. We demonstrate several examples of the approach for three technologically relevant materials and highlight current pitfalls that must be considered when employing these methodologies as well as their potential solutions.

36 MATERIALS SCIENCE↗

Experimental parameters, combined dynamics, and nonlinearity of a magnonic-opto-electronic oscillator (MOEO)

We report the construction and characterization of a comprehensive magnonic-opto-electronic oscillator (MOEO) system based on 1550-nm photonics and yttrium iron garnet (YIG) magnonics. The system exhibits a rich and synergistic parameter space because of the ability to control individual photonic, electronic, and magnonic components. Taking advantage of the spin wave dispersion of YIG, the frequency self-generation as well as the related nonlinear processes becomes sensitive to the external magnetic field. Besides being known as a band-pass filter and a delay element, the YIG delay line possesses spin wave modes that can be controlled to mix with the optoelectronic modes to generate higher-order harmonic beating modes. With the high sensitivity and external tunability, the MOEO system may find usefulness in sensing applications in magnetism and spintronics beyond optoelectronics and photonics.

47 OTHER INSTRUMENTATION↗