Search NASA⌕ Search

SEARCH · Search NASA

Results for “Orientation relationship”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Single-Facet Dominant Anatase TiO 2 (101) and (001) Model Catalysts to Elucidate the Active Sites for Alkanol Dehydration

Alkanol dehydration on Lewis acid-base pairs of transition metal oxide catalysts is a reaction of importance in oxygen removal from biomass-derived feedstocks and their conversion to chemicals in general. However, catalysts with a high degree of structural heterogeneity, such as commercial TiO 2 powders, are not well-suited to establish rigorous structure-function relationships at an atomic level. Here, we provide compelling evidence for the effects of surface orientation of TiO 2 catalyst on elimination reactions of alcohols. Two anatase titania model catalysts, with preferential exposure of (101) and (001) facets, were synthesized and studied for 2-propanol dehydration using kinetic, isotopic, microscopic, and spectroscopic measurements, coupled with DFT calculations. Surface Lewis acid sites were found to be active for 2-propanol dehydration and (101) facets are more reactive than (001) facets under the reaction conditions studied. On both anatase surfaces, 2-propanol was found to dehydrate via concerted E2 elimination pathways, but with different initial states and thus also different intrinsic activation barriers. Molecular 2-propanol dehydration dominates on TiO2 (101) while on TiO 2 (001), 2-propanol simultaneously converts to more stable 2-propoxide before dehydration, which then requires higher activation energies for E2 elimination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Inverse design of hypoeutectoid pearlite steel microstructures using a deep learning and genetic algorithm optimization framework

Goal-oriented microstructure design in metallic materials is a challenging task due to complex structure-property relationships. Traditional experimental and computational approaches are time-intensive and economically inefficient, limiting their applicability for large-scale design space exploration. Here, in this work, we propose an end-to-end framework that integrates deep learning models with genetic optimization to design microstructures with targeted mechanical properties. Deep learning models enable accurate forward design, while their integration with genetic optimization enables efficient inverse design within a few hours, compared to days or weeks using conventional finite element simulations. The framework combines experimental characterization and finite element modeling to analyze the influence of microstructural features on the mechanical behavior of hypoeutectoid steels. Data from both experiments and simulations are used to train the deep learning models. To demonstrate its effectiveness, we apply the framework to 0.63% carbon steel with proeutectoid ferrite and pearlite phases, commonly used in industrial applications. In this study, 2D microstructures were used for modeling, selected primarily for computational efficiency and to establish proof of concept. The framework successfully optimizes microstructures for targeted yield strength, ultimate strength, and stress concentration factors while significantly reducing computational time. Beyond hypoeutectoid steels, this scalable framework can be extended to other material systems and integrated with additive manufacturing, offering an efficient approach for accelerating microstructure design for specific engineering applications.

ConvLSTM↗
DOE OSTI2021

Multiscale Structural Characterization of a Smectic Liquid Crystalline Elastomer upon Mechanical Deformation Using Neutron Scattering

Liquid crystalline elastomers (LCEs) exhibit unique shape memory behavior due to the combination of liquid crystalline orientation and rubber elasticity. Multiscale structural characterization of these materials upon deformation is crucial to understanding their structure–property relationships. In this work, the structure evolution of an epoxy-based, main-chain LCE with deuterated flexible spacers upon uniaxial mechanical deformation is investigated at different length scales. Wide-angle and small-angle X-ray scattering (WAXS/SAXS) reveal the presence of smectic polymorphism and rotations of the smectic domains upon mechanical stretching, which is also confirmed by small-angle neutron scattering (SANS). Importantly, the selective deuteration enables an improved neutron scattering contrast between the smectic and amorphous domains. SANS patterns of the deformed, deuterated LCE exhibit strong scattering streaks that are not observed in SAXS or SANS of hydrogenated LCE, indicating the presence of highly aligned amorphous domains. The macroscopic orientation also results in the formation of structures in the micrometer scale revealed by the ultrasmall-angle neutron scattering (USANS) experiment.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Rheo-Structural Spectroscopy: Fingerprinting the In Situ Response of Fluids to Arbitrary Flow Fields

The objectives of this project were to develop new sample environments, measurement methodologies and associated modeling tools for characterizing the structural response to arbitrarily complex processing flows using small angle scattering, and to apply these new tools for understanding the fundamental physics governing the structuring of anisotropic particulate and polymeric materials under flow histories and conditions relevant to industrial processing flows. The research resulted in the development and implementation of a new sample environment, the fluidic four roll mill (FFoRM), for in situ small angle neutron and X-ray scattering (SANS/SAXS) measurements. These measurements are capable of generating large data sets that “fingerprint” how a complex fluid responds to a wide range of flow histories involving time variations in deformation type and rate. New modeling tools were developed to extract detailed microstructural information from such data sets, including orientation distribution functions and interparticle correlation functions, as well as reduced-order parametric descriptors of these high-dimensional functions that can be used to readily map, visualize and interpret a fluid’s structural response to its flow history. These new tools were applied to a range of model materials involving elongated particle suspensions in order to provide new insights into the physics of how flow couples with orientational and structural order in complex flows, particularly under non-dilute conditions for which no accurate theories currently exist. Using these investigations, we elucidated a number of new insights into the fundamental phenomena driving such process-structure-property relationships. These findings provide guidance for the further development of rheological models, and ultimately can inform the rational and model-based design of flow processes to achieve optimized orientational ordering that is key to the properties and function of a wide range of energy-relevant materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Identification and Description of a Silicic Volcaniclastic Layer in Gale Crater, Mars, Using Active Neutron Interrogation

The Dynamic Albedo of Neutrons instrument aboard the Mars Science Laboratory rover, Curiosity, has been used to map a stratigraphically-conformable layer of high-SiO 2 material in Gale crater. Previous work has shown this material contains tridymite, a high-temperature/low-pressure felsic mineral, interpreted to have a volcanic source rock. We describe several characteristics including orientation, extent, hydration, and geochemistry, consistent with a volcaniclastic material conformably deposited within a lacustrine mudstone succession. Relationships with widely dispersed alteration features and orbital detections of hydrated SiO 2 suggest that this high-SiO 2 layer extends at least 17 km laterally. Mineralogical abundances previously reported for this high-SiO 2 material indicated that hydrous species were restricted to the amorphous (non-crystalline) fraction, which is dominated by SiO2. The low mean bulk hydration of this high-SiO 2 layer (1.85 ± 0.13 wt.% water-equivalent hydrogen) is consistent with silicic glass in addition to opal-A and opal- CT. Persistent volcanic glass and tridymite in addition to opal in an ancient sedimentary unit indicates that the conversion to more ordered forms of crystalline SiO 2 has not proceeded to completion and that this material has had only limited exposure to water since it originally erupted, despite having been transported in a uviolacustrine system. Our results, including the conformable nature, large areal extent, and presence of vol- canic glass, indicate that this high-SiO 2 material is derived from the product of evolved magma on Mars. This is the rst identi cation of a silicic volcaniclastic layer on another planet, and has important implications for magma evolution mechanisms on single-plate planets.

58 GEOSCIENCES↗
DOE OSTI2026

Epitaxial registry and transport properties in V4O7 thin films

We report the growth of V4O7 thin films deposited simultaneously on amorphous SiO2 and crystalline c-cut Al2O3 substrates. x-ray diffraction shows that films grown on SiO2 are polycrystalline with no preferred orientation, while films grown on Al2O3 exhibit a well-defined out-of-plane orientation and an in-plane registry consistent with epitaxial growth. Transmission electron microscopy confirms the crystallographic relationship between the V4O7 film and the Al2O3 substrate. Atomic force microscopy indicates substantially lower surface roughness for films grown on Al2O3 (~6 nm) compared to those grown on SiO2 (~22 nm), and Raman spectroscopy confirms stabilization of the same V4O7 phase on both substrates. Electrical transport measurements reveal a metal–insulator transition near 244 K for both substrates, with thermal hysteresis not exceeding ~1 K. Although the transition temperature remains essentially unchanged, films grown on Al2O3 exhibit higher conductivity over the entire temperature range, exceeding that of films grown on SiO2 by approximately two orders of magnitude at 100 K and by a factor of five at 300 K. These results indicate that the conductivity differences are consistent with variations in microstructural connectivity associated with crystallographic order.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Structure-Property Relationships and Idiosyncrasies of Bulk, 2D Hybrid Lead Bromide Perovskites

Bulk, 2D hybrid lead bromide perovskites comprise a robust family of halide perovskites with a rich structural and photophysical chemistry witnessed thus far. In an attempt to boost focus on systematically charting the phase space of 2D lead bromide perovskites, it is timely and critical to review the structure-property relationships that are emerging in this family of materials. In this review, we assess the multitude of (100)-orientated lead bromide perovskites, as well as the idiosyncratic (110)-orientated members. We examine the underpopulated phase space of bulk, thick-layer (n>1) lead bromide perovskites, highlighting several examples of structures violating Goldschmidt's tolerance factor with large organic spacers in the cuboctahedral perovskite cages. The narrow and broadband emission is discussed, along with the developed optoelectronic profile of bulk, lead bromide perovskites, as yet. Lastly, we summarize the integration of 2D lead bromide perovskites in optoelectronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Unusual layer-by-layer growth of epitaxial oxide islands during Cu oxidation

Elucidating metal oxide growth mechanisms is essential for precisely designing and fabricating nanostructured oxides with broad applications in energy and electronics. However, current epitaxial oxide growth methods are based on macroscopic empirical knowledge, lacking fundamental guidance at the nanoscale. Using correlated in situ environmental transmission electron microscopy, statistically-validated quantitative analysis, and density functional theory calculations, we show epitaxial Cu 2 O nano-island growth on Cu is layer-by-layer along Cu 2 O(110) planes, regardless of substrate orientation, contradicting classical models that predict multi-layer growth parallel to substrate surfaces. Growth kinetics show cubic relationships with time, indicating individual oxide monolayers follow Frank-van der Merwe growth whereas oxide islands follow Stranski-Krastanov growth. Cu sources for island growth transition from step edges to bulk substrates during oxidation, contrasting with classical corrosion theories which assume subsurface sources predominate. Our results resolve alternative epitaxial island growth mechanisms, improving the understanding of oxidation dynamics critical for advanced manufacturing at the nanoscale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Exciton Delocalization in Indolenine Squaraine Aggregates Templated by DNA Holliday Junction Scaffolds

Exciton delocalization plays a prominent role in the photophysics of molecular aggregates, ultimately governing their particular function or application. DNA is a compelling scaffold in which to template molecular aggregates and promote exciton delocalization. As individual dye molecules are the basis of exciton delocalization in molecular aggregates, their judicious selection is important. Motivated by their excellent photostability and spectral properties, here we examine the ability of squaraine dyes to undergo exciton delocalization when aggregated via a DNA Holliday junction (HJ) template. A commercially available indolenine squaraine dye was chosen for the study given its strong structural resemblance to Cy5, a commercially available cyanine dye previously shown to undergo exciton delocalization in DNA HJs. Three types of DNA-dye aggregate configurations—transverse dimer, adjacent dimer, and tetramer—were investigated. Signatures of exciton delocalization were observed in all squaraine-DNA aggregates. Specifically, strong blue shift and Davydov splitting were observed in steady-state absorption spectroscopy and exciton-induced features were evident in circular dichroism spectroscopy. Strongly suppressed fluorescence emission provided additional, indirect evidence for exciton delocalization in the DNA-templated squaraine dye aggregates. To quantitatively evaluate and directly compare the excitonic Coulombic coupling responsible for exciton delocalization, the strength of excitonic hopping interactions between the dyes were obtained by simultaneous fitting the experimental steady-state absorption and CD spectra via a Holstein-like Hamiltonian in which, following the theoretical approach of Kühn, Renger, and May, the dominant vibrational mode is explicitly considered. The excitonic hopping strength within indolenine squaraines was found to be comparable to that of the analogous Cy5 DNA-templated aggregate. The squaraine aggregates adopted primarily an H-type (dyes oriented parallel to each other) spatial arrangement. Extracted geometric details of dye mutual orientation in the aggregates enabled close comparison of aggregate configurations and the elucidation of the influence of dye angular relationship on excitonic hopping interactions in squaraine aggregates. Furthermore, these results encourage the application of squaraine-based aggregates in next generation systems driven by molecular excitons.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Optimization of submicron Ni/Au/Ge contacts to an AlGaAs/GaAs two-dimensional electron gas

We report on fabrication and performance of sub-micrometer Ni/Au/Ge contacts to a two-dimensional electron gas in an AlGaAs/GaAs heterostructure. Utilizing scanning transmission electron microscopy, energy dispersive x-ray spectroscopy, and low temperature electrical measurements, we investigate the relationship between contact performance and the mechanical and chemical properties of the annealed metal stack. Contact geometry and crystallographic orientation significantly impact performance. Our results indicate that the spatial distribution of germanium in the annealed contact plays a central role in the creation of high transmission contacts. We characterize the transmission of our contacts at high magnetic fields in the quantum Hall regime. Our work establishes that contacts with an area of 0.5 μm2 and resistance less than 400 Ω can be fabricated with high yield.

Physics↗
DOE OSTI2020

Effects of heat treatment and build orientation on the evolution of $ϵ$ and $α'$ martensite and strength during compressive loading of additively manufactured 304L stainless steel

In this paper, the effect of heat-treatment and build orientation on martensitic phase transformation in additively manufactured (AM) 304L stainless steel is studied and compared with conventionally produced wrought material. The relationships between observed martensitic transformations and material microstructures and their effects on mechanical strength are established through experimental observations. In situ high-energy X-ray powder diffraction measurements were performed to monitor the evolution of $ϵ$ and $α'$ martensite during compressive loading of stainless steel. Electron backscatter diffraction (EBSD) was used to provide insight on initial grain morphology, crystallographic misorientation within grains, and crystallographic texture. Heat treatment alters the microstructure of AM samples creating different initial conditions. This difference in starting microstructure resulted in variability in martensitic transformation during compressive deformation. The rate of martensitic transformation decreased for AM samples treated with temperatures up to 1100°C, after which the AM microstructures recrystallized, resulting in increased rate of martensitic transformation for those samples treated at higher temperatures. It was also observed that aligning the axis of compression with the AM build direction resulted in a lower rate of strain-induced martensite formation as opposed to aligning the compression axis perpendicular to it. More favorable distribution of crystal orientations in the latter loading orientation promoted martensitic transformation. These and additional experimental observations from EBSD in terms of kernel average misorientation, mean grain orientation spread, and mean crystallite size reveal strong microstructural effects on strength of additively manufactured metallic materials.

304L stainless steel↗
DOE OSTI2021

Simulated effects of sample size and grain neighborhood on the modeling of extreme value fatigue response

Assessing the size of representative volume elements (RVEs) for fatigue-related applications is challenging. A RVE relevant to random microstructure requires a volume of material that is sufficiently large to capture the grain/phase heterogeneity that captures all statistical moments of the distribution of the driving force for fatigue crack formation at “hot spot” grains. Consequently, the large size of a microstructure RVE required to study fatigue phenomena is largely computationally intractable and difficult to explore. A more realistic objective in this work is to systematically study, as a function of the size of a statistical sample of microstructure, trends towards convergence of the simulated distribution of driving force for fatigue crack formation. Our present work accordingly leverages the recently developed open-source PRISMS-Fatigue framework to examine the trends in convergence of extreme value distributions (EVD) of Fatigue Indicator Parameters (FIPs) in progressively larger polycrystalline microstructure realizations of FCC Al alloy 7075-T6 using crystal plasticity finite element method simulations. The results are compared to the traditional method in which ensembles of statistical volume elements (SVEs) are simulated to build up statistics intended to approximate those associated with a larger volume of material. The convergence of EVDs with increase of size of a SVE of microstructure is closely related to the extent of grain nearest neighbor (NN) interactions. Accordingly, the sensitivity of the local micromechanical response at hot spot grains is quantitatively investigated by systematically varying the orientations of NN grains. Results indicate that SVEs with cubic crystallographic texture tend towards convergence of the EVD of FIPs with tens of thousands of grains while the random and rolled textures require larger volumes. Simple relationships based on microstructure parameters (e.g., Schmid Factor, grain size, NN misorientation) do not completely correlate to fatigue hot spot grains. Finally, the sensitivity of the extreme value fatigue response at hot spot grains extends to the 3rd NN when a single neighborhood grain orientation is altered.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Understanding lead halide perovskites

It has been ten years since research on lead halide perovskites (LHPs) took off spectacularly and expanded into one of the most active fields today in chemistry, physics, materials science, and engineering. There is no doubt that the rapid growth of this field has been fueled by the exceptional performance of this class of materials in solar cells, light emitting devices, and other electronic, optoelectronic, and photonic devices. Such application oriented advance has been accompanied by major development in mechanistic understanding. Growing mechanistic studies on LHPs have revealed structure–property relationships including, among others, structural instability, unique defect chemistry, dynamic disorder and anharmonicity of phonons, local symmetry breaking, efficient screening of charge carriers in large polaron formation, and the Rashba effect due to spin–orbital coupling and the presence of local electric fields. This special issue collects the cutting edge of our understanding of why LHPs work and what lessons LHPs have taught us about structure and dynamics, in general.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ferroelectric HfO 2 and the importance of strain

Ferroelectric oxides based on HfO 2 show tremendous promise for the next generation of memory and logic devices. The ferroelectric polymorph is one of several that can be derived from the high symmetry cubic fluorite structure of HfO 2 . A single grain of HfO 2 may consist of a coherent mixture of multiple orientational and translational variants of different polymorphs. Here, we use symmetry-adapted strain-order parameters to elucidate the relationship between the different HfO 2 polymorphs and their symmetrically equivalent variants. We use first-principles electronic structure methods to identify minimum energy pathways and map them in subspaces of the symmetry-adapted strain order parameters. We next investigate the atomic structure of domain boundaries that separate coexisting variants of ferroelectric HfO 2 . Further, we rely on Gibbsian excess quantities and a precise specification of mechanical boundary conditions to describe the thermodynamic properties of domain boundaries. Our first-principles calculations show that the O and Hf shuffle arrangement within a domain boundary is closely related to the intermediate shuffle patterns of the homogeneous pathways between ferroelectric variants. Furthermore, the preferred structure within a boundary is very sensitive to local strain constraints imposed by the adjacent ferroelectric variants, leading to highly anisotropic domain boundary energies.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Location-Dependent Mechanical Property Evaluation on Additively Manufacture Materials

This report summarizes research activities conducted at Argonne National Laboratory in support of the development, qualification and certification of additively manufactured (AM) metallic components to allow for innovative reactor design and licensing for the Transformational Challenge Reactor (TCR). Focus is on the evaluation of high temperature mechanical properties including creep and fatigue of 316L stainless steel manufactured by the laser powder bed fusion process. Creep behavior of AM 316L stainless steel was evaluated for rods printed by either or a combination of both lasers of the dual-laser system of a Concept Laser-M2 printer to examine the consistency across the build plate. Creep tests were conducted at temperatures of 550, 575, 600, and 650°C and stresses between 175 and 300 MPa using ASTM standard-sized specimens. The effect of heat treatments at different temperatures on creep properties of AM 316L SS was examined to understand the processing-microstructure-property relationship. Fatigue properties of AM 316L SS were investigated for two print geometries (rod and plate) and in two build orientations of printed plates. Locations of specimens in the build were carefully tracked such that the testing data can be directly related to location-specific in situ data to establish links between printing process, post-printing treatment, microstructure and mechanical properties. The work is to support the development of a digital platform informed approach to AM component qualification and certification for nuclear applications.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Control of light, spin and charge with chiral metal halide semiconductors

We report the relationship between the structural asymmetry and optoelectronic properties of functional materials is an active area of research. The movement of charges through an oriented chiral medium depends on the spin configuration of the charges, and such systems can be used to control spin populations without magnetic components - termed the chiral-induced spin selectivity (CISS) effect. CISS has mainly been studied in chiral organic molecules and their assemblies. Semiconductors are non-magnetic extended systems that allow for the control of charge transport, as well as the absorption and emission of light. Therefore, introducing chirality into semiconductors would enable control over charge, spin and light without magnetic components. Chiral metal halide semiconductors (MHSs) are hybrid organic-inorganic materials that combine the properties of small chiral organic molecules with those of extended inorganic semiconductors. Reports of CISS in chiral MHSs have resulted in breakthroughs in our understanding of CISS and in the realization of spin-dependent optoelectronic properties. This Review examines the fundamentals and applications of CISS in chiral MHSs. The structural diversity and key structure-property relationships, such as chiral transfer from the organic to the inorganic components, are summarized. With a focus on the underlying chemistry and physics, the control of spin, light and charge in these semiconductors is explored.

14 SOLAR ENERGY↗
DOE OSTI2020

Database development and exploration of process–microstructure relationships using variational autoencoders

The paper demonstrates graphical representation of a large database containing process–microstructure relationships using an unsupervised machine learning algorithm. Correlating microstructural features to processing is an essential first step to answer the difficult problem of process sequence design. Here, a large database of 346,200 orientation distribution functions resulting from a variety of process sequences is constructed, where each sequence comprises up to four stages of tension, compression and rolling along different directions in various permutations. This open-source database is constructed for collaborative development of process design algorithms. The paper demonstrates a novel application of the large database: graphical representation of texture–process relationships. A variational autoencoder is used to reduce the entire database to a two dimensional latent space where variations in processes and properties can be visualized. Using proximity analysis in this latent space, we can quickly unearth multiple process solutions to the problem of texture or property design.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Wave vector and field vector orientation dependence of Fe K pre-edge X-ray absorption features in clinopyroxenes

Abstract Pre-edge X-ray absorption features are commonly used to derive redox states for transition metal oxides in crystals and glasses. Several calibrations for Fe2+ and Fe3+ in silicate glasses have utilized the general relationships among pre-edge peak intensity, energy, and redox state. However, absorption variations complicate those relationships in anisotropic crystals. Although absorption anisotropy at and above the energy of the rising edge adheres to the typical cos2 relationship observed in absorption spectroscopies at other energies, the anisotropy of the pre-edge is far more complicated. Prior studies focusing on pre-edge absorption anisotropy demonstrate a 1-cos4φ dependence of absorption magnitudes with rotation. Experiments presented here show that absorption magnitudes of the pre-edge vary as a function of both electric field vector orientation and wave vector direction. However, rotations around the field vector axis or wave vector axis individually result in cos2 dependence of absorption magnitudes. Rotations where both wave vector and field vector orientation are varied are not well fit by either model in the pre-edge. The resulting anisotropy complicates the process of measuring characteristic absorption in the pre-edge, making valence state determinations challenging for strongly anisotropic crystal structures such as pyroxene.

Geochemistry & Geophysics↗