Search NASA⌕ Search

SEARCH · Search NASA

Results for “Oxide Phase Formation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2013

Effects of High Spinel and Chromium Oxide Crystal Contents on Simulated HLW Vitrification in DM100 Melter Tests (Final Report)

The principal objective of the work was to evaluate the effects of spinel and chromium oxide particles on WTP HLW melter operations and potential impacts on melter life. This was accomplished through a combination of crucible-scale tests, settling and rheological tests, and tests on the DM100 melter system. Crucible testing was designed to develop and identify HLW glass compositions with high waste loadings that exhibit formation of crystalline spinel and/or chromium oxide phases up to relatively high crystal contents (i.e., > 1 vol%). Characterization of crystal settling and the effects on melt rheology was performed on the HLW glass formulations. Appropriate candidate HLW glass formulations were selected, based on characterization results, to support subsequent melter tests. In the present work, crucible melts were formulated that exhibit up to about 4.4 vol% crystallization.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1979

Formation and deposition of volcanic sulfate aerosols on Mars

The paper considers the formation and deposition of volcanic sulfate aerosols on Mars. The rate limiting step in sulfate aerosol formation on Mars is the gas phase oxidation of SO2 by chemical reactions with O, OH, and HO2; submicron aerosol particles would circuit Mars and then be removed from the atmosphere by gravitational forces, globally dispersed, and deposited over a range of equatorial and mid-latitudes. Volcanic sulfate aerosols on Mars consist of liquid droplets and slurries containing sulfuric acid; aerosol deposition on a global or hemispheric scale could account for the similar concentrations of sulfur within surficial soils at the two Viking lander sites.

Settle, M.↗
DOE OSTI2016

Impact of chamber wall loss of gaseous organic compounds on secondary organic aerosol formation: Explicit modeling of SOA formation from alkane and alkene oxidation

Recent studies have shown that low volatility gas-phase species can be lost onto the smog chamber wall surfaces. Although this loss of organic vapors to walls could be substantial during experiments, its effect on secondary organic aerosol (SOA) formation has not been well characterized and quantified yet. Here the potential impact of chamber walls on the loss of gaseous organic species and SOA formation has been explored using the Generator for Explicit Chemistry and Kinetics of the Organics in the Atmosphere (GECKO-A) modeling tool, which explicitly represents SOA formation and gas–wall partitioning. The model was compared with 41 smog chamber experiments of SOA formation under OH oxidation of alkane and alkene series (linear, cyclic and C 12 -branched alkanes and terminal, internal and 2-methyl alkenes with 7 to 17 carbon atoms) under high NO x conditions. Simulated trends match observed trends within and between homologous series. The loss of organic vapors to the chamber walls is found to affect SOA yields as well as the composition of the gas and the particle phases. Simulated distributions of the species in various phases suggest that nitrates, hydroxynitrates and carbonylesters could substantially be lost onto walls. The extent of this process depends on the rate of gas–wall mass transfer, the vapor pressure of the species and the duration of the experiments. Furthermore, this work suggests that SOA yields inferred from chamber experiments could be underestimated up a factor of 2 due to the loss of organic vapors to chamber walls.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Mesocrystalline Ordering and Phase Transformation of Iron Oxide Biominerals in the Ultrahard Teeth of Cryptochiton stelleri

Biological organisms naturally synthesize complex, hierarchical, multifunctional materials through mineralization processes at ambient conditions and under physiological pH. One such example is the ultrahard and wear-resistant radular teeth found in mollusks, which are used to scape against the rock to feed on algae. Herein, the biologically controlled structural development of the hard, outer magnetite-containing shell of the chitin teeth is revealed. Specifically, the formation of a series of mesocrystalline iron oxide phases, templated by chitin-binding proteins, is identified. The initial domains, consisting of ferrihydrite mesocrystals with a spherulite-like morphology, undergo a solid-state phase transformation to form magnetite while maintaining mesocrystallinity, likely via a shear-induced solid-state reaction, without any noticeable architectural changes. Subsequent growth via Ostwald ripening leads to nearly single-crystalline rod-like elements. In addition, an interpenetrating organic matrix is identified that, at early stages of tooth development, potentially contains iron-binding proteins that guide the self-assembly of the mesocrystalline mineral and influence the preferred orientation of the later-formed magnetite nanorods, which ultimately determines the mechanical behavior of the mature chiton teeth.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Influence of Gel Formation on the Heterogeneous Oxidation of Organic Aerosol

Recent work has shown that divalent cations can perturb the viscosity and phase state of oxygenated organic particles in unexpected ways, sometimes leading to the formation of gel states. Despite the prevalence of divalent cations and oxygenated organic molecules in atmospheric aerosol, particularly in marine environments, the influence of gel states on the reaction rates is not well established. Here, in this work, we measure and compare the impact of viscosity and gel formation on the ozonolysis chemistry of aerosol particles containing the unsaturated, oxygenated organic species ascorbic acid (AA). AA serves as an excellent proxy compound for highly oxidized molecules in the atmosphere. We measured the hygroscopic growth, phase state, viscosity, and water diffusion rate in binary particles containing AA and water and in ternary particles with an additional co-solute of either ammonium sulfate or CaCl 2 . These measurements reveal gel formation in particles mixed with CaCl 2 , as particles become rigid but allow for relatively rapid diffusion rates of water, consistent with previous observations of gel behavior. We measured the rate of ozonolysis of these particles under a range of relative humidity (RH) conditions, showing a clear decrease in the rate with decreasing RH, consistent with the increase in viscosity and slowed diffusion. Notably, we measured the rate of ozonolysis of particles existing in a gel state, showing that following an initial period of decay, the rate of reaction arrests, indicating that the organic material in the solid state is protected from the reaction. This work shows that viscous particles and gel particles exhibit different reactivity toward heterogeneous oxidants, with significant implications for how we understand the chemical evolution of aerosol particles in the atmosphere.

gels↗
DOE OSTI2020

In Situ Transmission Electron Microscopy Study of Conductive Filament Formation in Copper Oxides

The structural and electrical property changes of two types of copper oxides (CuO and Cu 2 O) under voltage bias are studied with in situ transmission electron microscopy (TEM). The phases of different materials are confirmed with electron diffraction. In both types of oxides, dynamic conductive path formation and dissolution are observed. The decrease in resistance of CuO film is found to be accompanied with the formation of Cu 4 O 3 phase where the electric field strength is highest. We also find that the decrease in resistivity of Cu 2 O film is more extensive and occurs in an area depending on the level of current compliance. In conclusion, the physical mechanisms responsible for the observations and their implications for the formation of conducting regions in copper oxide-based memristors are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Computational investigation of the phase stability and the electronic properties for Gd-doped HfO{sub 2}

Rare earth doping is an important approach to improve the desired properties of high-k gate dielectric oxides. We have carried out a comprehensive theoretical investigation on the phase stability, band gap, formation of oxygen vacancies, and dielectric properties for the Gd-doped HfO{sub 2}. Our calculated results indicate that the tetragonal phase is more stable than the monoclinic phase when the Gd doping concentration is greater than 15.5%, which is in a good agreement with the experimental observations. The dopant's geometric effect is mainly responsible for the phase stability. The Gd doping enlarges the band gap of the material. The dielectric constant for the Gd-doped HfO{sub 2} is in the range of 20–30 that is suitable for high-k dielectric applications. The neutral oxygen vacancy formation energy is 3.2 eV lower in the doped material than in pure HfO{sub 2}. We explain the experimental observation on the decrease of photoluminescence intensities in the Gd-doped HfO{sub 2} according to forming the dopant-oxygen vacancy complexes.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Calorimetric study of skutterudite (CoAs2.92) and heazlewoodite (Ni3S2)

Abstract Nickel and cobalt arsenides, sulfarsenides, and sulfides occur in many hydrothermal ore deposits, but their thermodynamic properties are not well known, in some cases not known at all. In this work, we determined a full set of thermodynamic properties for heazlewoodite and skutterudite. Both phases were synthesized in evacuated silica tubes at elevated temperatures, and electron microprobe analyses gave their compositions as Ni3S2 and CoAs2.92, respectively. Enthalpies of formation were measured by high-temperature oxide-melt solution calorimetry. The reference phases were pure elements, thus eliminating any systematic errors related to such phases. The enthalpies of formation at T = 298.15 K and P = 105 Pa are –216.0 ± 8.4(2σ) and –88.2 ± 6.1 kJ·mol−1 for Ni3S2 and CoAs2.92, respectively. Entropies were calculated from low-temperature heat capacity (CP) data from relaxation (PPMS) calorimetry and are 133.8 ± 1.6 and 106.4 ± 1.3 J·mol–1·K–1, respectively. The calculated Gibbs free energies of formation are –210.0 ± 8.4 and –79.9 ± 6.2 kJ·mol−1 for Ni3S2 and CoAs2.92, respectively. The PPMS CP data, together with a set of differential scanning calorimetry measurements, were used to derive CP polynomials up to 700 K with the Kieffer model based on previously published frequencies of acoustic and optic modes. Equilibrium constants for selected reactions with an aqueous phase were calculated up to 700 K. Geochemical modeling in these systems, however, should await until more reliable data for other phases from the system Co-Ni-As-S are available.

Geochemistry & Geophysics↗
DOE OSTI2018

Formation and Ripening of Self-Assembled Multilayers from the Vapor-Phase Deposition of Dodecanethiol on Copper Oxide

Here, the vapor-phase reaction of dodecanethiol (DDT) with copper oxide surfaces and the molecular level composition and structure of the resulting films were examined. Atomic force microscopy, cross-sectional transmission electron microscopy, and electron energy loss/electron dispersive spectroscopy reveal that, instead of forming self-assembled monolayers, DDT etches CuO surfaces to create ~8 nm thick Cu-thiolate multilayers. These layers are composed of surprisingly well-ordered crystallites, oriented either parallel or perpendicular to the substrate surface. Pre-etching of the CuO to expose the underlaying copper metal is shown to prevent the formation of multilayers and instead allow for the formation of the expected monolayers. Water contact angle and Fourier transform infrared spectroscopy are further shown to be ineffective at distinguishing the multilayer and monolayer thiol films. Interestingly, the multilayer films are unstable in air, ripening into particles 20 μm wide and several hundred nanometers tall over the course of a week. Air exposure also leads to the slow oxidation of the sulfur and copper within the films at a rate similar to what has been seen before for DDT monolayers. As a result, the multilayers show no significant improvement over monolayers in the prevention of oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Impact of silver metallization and electron irradiation on the mechanical deformation of polyimide films

The impact of silver metallization and electron irradiation on the physical and mechanical properties of polyimide films has been studied. The metal that impregnated the structure of the polyimide substrate was 1–5 μm. The surface coatings contained 80–97% of the relative silver mirror in the visible and infrared regions. Irradiation was performed at the ELU-6 linear accelerator with an average beam electron energy of 2 MeV, an integral current of up to 1000 μA, a pulse repetition rate of 200 Hz, and a pulse duration of 5 μs. The absorbed dose in the samples was 10, 20, 30, and 40 MGy. The samples were deformed at room temperature under uniaxial tension on an Instron 5982 universal testing system. The structural changes in the composite materials that result from the impact of the physical factors were studied using an X-ray diffractometer DRON-2M in air at 293 K using CuK{sub α} radiation (λ{sub αCu} = 1.5418 Å). A substantial growth of mechanical characteristics resulting from the film metallization, as compared to the pure film, was observed. The growth of the ultimate strength by Δσ = 105 MPa and the plasticity by Δε = 75% is connected with the characteristics of the change of structure of the metallized films and the chemical etching conditions. The electron irradiation of the metallized polyimide film worsens its elastic and strength characteristics due to the formation of new phases in the form of silver oxide in the coating. The concentration of these phases increased with increasing dose, which was also the result of the violation of the ordered material structure, namely, the rupture of polyimide macromolecule bonds and the formation of new phases of silver in the coating. A mathematical model was obtained that predicts the elastic properties of silver metallized polyimide films. This model agrees with the experimental data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Deciphering the Mechanistic Role of Individual Oxide Phases and Their Combinations in Supported Mn–Na 2 WO 4 Catalysts for Oxidative Coupling of Methane

Oxidative coupling of methane (OCM) is an attractive direct route for upgrading methane to valuable chemicals. In this study, Temporal Analysis of Products (TAP) and steady state experiments are conducted to understand the role of individual oxide phases and their combinations in supported Mn-Na 2 WO 4 /SiO 2 catalysts for OCM. The results from TAP transient kinetic studies indicate that Mn plays an important role in promoting gas phase oxygen activation, while NaO x /SiO 2 and WO x /SiO 2 are relatively inert towards gas phase oxygen and methane activation. However, the supported catalyst combining Na and W in the form Na 2 WO 4 show enhanced gas phase oxygen activation exhibiting a much lower oxygen activation energy (148 kJ/mol) and enhanced activity toward methane activation as compared to the individual supported oxide catalysts. Addition of Mn to Na 2 WO 4 /SiO 2 further decreases the oxygen activation energy by 40 kJ/mol. Moreover, methane activation is also enhanced with CH 3 as the main intermediate but, with increasing Mn content, more CH 2 intermediates are observed. Different forms of oxygen (both dioxygen and atomic) are detected on the catalyst surface using isotopic pump/probe pulsing and their distribution is found to depend on the catalyst composition. An optimal Mn content in the Na 2 WO 4 /SiO 2 catalyst system is needed to enhance the amount of dioxide surface species (e.g., superoxide 16 O 2 - or peroxide 16 O 2 2- ) associated with the Na 2 WO 4 leading to high C 2 selectivity for OCM. When the Mn content is too high, the larger MnOx domains are shown to contribute to the formation of higher concertation of monoxide surface species that lead to nonselective OCM pathways. This insight from transient kinetic characterization using TAP combined with conventional steady state studies, provides a deeper understanding of the role of individual oxide phases and their combination on supported catalysts toward the formation of intermediate surface species and their impact on the OCM reaction mechanism. This knowledge is critical toward designing superior catalyst formulations for OCM.

10 SYNTHETIC FUELS↗
DOE OSTI2018

The role of tungsten phases formation during tungsten metal powder consolidation by FAST: Implications for high-temperature applications

Highlights: • Lowering the sintering temperature of W to 2173 K by using FAST. • Application of electron microscopy for microstructure characterisation. • W{sub 2}C shell formation due to C difussion from graphite tooling. • Identification of co-formed secondary phase, WO{sub 2}. • Influence of WO{sub 2} on high-thermal applications. - Abstract: Tungsten is a candidate material for the demonstration fusion power plant DEMO. To ensure high density and structural stability, Field-Assisted Sintering Technique (FAST) is proposed as a consolidation method. This study discusses the formation of phases during sintering of tungsten by the FAST. Scanning electron microscopy, X-ray diffraction and transmission electron microscopy were used to evaluate the microstructure in tungsten-based materials. The results of microscopic examinations revealed the in-situ formation of tungsten oxide and a formation of tungsten carbide shell around tungsten core. Tungsten carbide-rich shell is formed due to the carbon diffusion from the graphite die used in the FAST into tungsten at high temperatures. In contrast to easy removal of tungsten carbide shell by mechanical grinding, the formation of tungsten oxide in the W-matrix can influence the performance of such material when used as plasma-facing material in the fusion reactor. High-temperature experiments at 1873 K showed that tungsten-oxide phase starts to decompose, which results in material degradation and formation of voids and surface blisters.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Compatibility of Fe-Cr-Al and Fe-Cr-Al-Mo oxide dispersion strengthened steels with static liquid sodium at 700 °C

We report the corrosion behavior and tensile properties of oxide dispersion strengthened (ODS) FeCr, FeCrAl, FeCrAlMo steels and 316H stainless steel were evaluated after 1000 h at 700 °C in static sodium with and without an oxygen getter (Zr foil). Without Zr foil to getter the dissolved oxygen in the liquid sodium, combined oxidation (formation of Cr, Fe-rich or Al-rich oxides) and dissolution of the studied materials was observed. For the ODS FeCr, Cr- and Fe-rich oxide formation and dissolution induced Cr depletion in the underlying alloy and led to the formation of laves phases that were observed to be detrimental to the room temperature tensile properties. For ODS FeCrAlMo and FeCrAl Al-rich oxide formation and dissolution resulted in Al depletion in the underlying alloys but did not impact tensile properties at room temperature. For 316H temperature induced sensitization combined with oxidation decreased room temperature tensile properties. With Zr foil added as oxygen getter, roughened surfaces and Al depletion profiles suggested the dissolution of ODS FeCr and FeCrAl into the liquid sodium while limited dissolution was observed for ODS FeCrAlMo and 316H. For the 316H and ODS FeCrAlMo steels, precipitates were formed at the grain boundaries after exposure. Tensile properties of ODS FeCr, FeCrAl and FeCrAlMo were not affected by the 1000 h corrosion exposure with Zr foil added to the sodium but for 316H temperature-induced grain boundary sensitization negatively affected the tensile properties.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Design, properties, and weldability of advanced oxidation-resistant FeCrAl alloys

FeCrAl alloys are promising as corrosion- and oxidation-resistance materials for extreme high-temperature applications. However, further alloy design and improvement requires a delicate balance between workability, weldability, propensity for '-phase formation, among other factors. Here, a series of advanced oxidant resistant FeCrAl alloys were produced and investigated. Variants with Al (+2%), Nb (+1%), and TiC (0.1, 0.3, and 1%) additions over the reference alloy (Fe-13%Cr-5%Al) were characterized in detail before and after controlled laser beam welding using tensile tests with digital image correlation, SEM-EBSD analysis, and fractography. All investigated alloys demonstrated yield stress in the weldment over 500 MPa; no welding-induced cracking was observed. However, it was shown that the increase in the Al-content over 5% was detrimental leading to a brittle fracture mechanism and decreased ductility in the weldment. At the same time, Nb and TiC additions were beneficial for preventing grain growth and reducing local softening (yield stress reduction) in the heat-affected zone. The 1% TiC addition also effectively refined grain size in the weldment.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Composition, Structure, and Semiconductor Properties of Chemically Deposited SnSe Films

Highly adhesive tin-monoselenide (SnSe) layers (200 ± 10) nm thick are grown by hydrochemical deposition from a trilonate reactive mixture. X-ray diffraction shows that the synthesized films crystallize in the orthorhombic system (space group Pnma). The significant oxygen content in the film surface layers is explained by the partial oxidation of samples with SnO{sub 2} phase formation. The results of ion etching to a depth of 18 nm show a sharp decrease in the oxygen content over thickness and real correspondence to the SnSe elemental composition. The band gap determined by optical studies for direct transitions is 1.69 eV. The synthesized SnSe layers exhibit p-type conductivity, which is characteristic of this material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Thermal Expansion of EuF{sub 2+x} Single Crystals and Their Thermal Stability

Thermal expansion of an EuF{sub 2.136} nonstoichiometric crystal with the fluorite structure type (Eu{sub 0.864}{sup 2+}Eu{sub 0.136}{sup 3+}F{sub 2.136}, lattice parameter 5.82171(5) Å) has been experimentally investigated in the temperature range of 9–500 K. The coefficient of thermal expansion is α = 15.8 × 10{sup –6} K{sup –1} at T = 300 K. The observed anomalies in the behavior of the coefficient of thermal expansion at T > 400 K are related to the oxidation processes with partition of Eu{sup 2+} ions. It is established by differential scanning calorimetry that the onset temperature of EuF{sub 2+x} oxidation in air is 430 K and that this process occurs in three stages. X-ray diffraction analysis shows that the oxidation is accompanied by the formation of a phase mixture based on two modifications of the Eu{sub 1–y}{sup 3+}Eu{sub y}{sup 2+}F{sub 3–y} solid solution with the structure types of tysonite (LaF{sub 3}), orthorhombic β-YF{sub 3} phase, and europium oxyfluorides of variable composition EuO{sub 1–x}F{sub 1+2x}, with dominance of the latter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2012

Nuclear waste vitrification efficiency: cold cap reactions

The cost and schedule of nuclear waste treatment and immobilization are greatly affected by the rate of glass production. Various factors influence the performance of a waste-glass melter. One of the most significant, and also one of the least understood, is the process of batch melting. Studies are being conducted to gain fundamental understanding of the batch reactions, particularly those that influence the rate of melting, and models are being developed to link batch makeup and melter operation to the melting rate. Batch melting takes place within the cold cap, i.e., a batch layer floating on the surface of molten glass. The conversion of batch to glass consists of various chemical reactions, phase transitions, and diffusion-controlled processes. These include water evaporation (slurry feed contains as high as 60% water), gas evolution, the melting of salts, the formation of borate melt, reactions of borate melt with molten salts and with amorphous oxides (Fe2O3 and Al2O3), the formation of intermediate crystalline phases, the formation of a continuous glass-forming melt, the growth and collapse of primary foam, and the dissolution of residual solids. To this list we also need to add the formation of secondary foam that originates from molten glass but accumulates on the bottom of the cold cap. This study presents relevant data obtained for a high-level-waste melter feed and introduces a one-dimensional (1D) mathematical model of the cold cap as a step toward an advanced three-dimensional (3D) version for a complete model of the waste glass melter. The 1D model describes the batch-to-glass conversion within the cold cap as it progresses in a vertical direction. With constitutive equations and key parameters based on measured data, and simplified boundary conditions on the cold-cap interfaces with the glass melt and the plenum space of the melter, the model provides sensitivity analysis of the response of the cold cap to the batch makeup and melter conditions. The model demonstrates that batch foaming has a decisive influence on the rate of melting. Understanding the dynamics of the foam layer at the bottom of the cold cap and the heat transfer through it appears crucial for a reliable prediction of the rate of melting as a function of the melter-feed makeup and melter operation parameters. Although the study is focused on a batch for waste vitrification, the authors expect that the outcome will also be relevant for commercial glass melting.

Hrma, Pavel R↗