Search NASA⌕ Search

SEARCH · Search NASA

Results for “PERFECT GAS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Deformation sensor based on polymer-supported discontinuous graphene multi-layer coatings

Graphene can be conveniently used in the modification of polymer surfaces. Graphene macromolecules are perfectly transparent to the visible light and electrically conductive, consequently these two properties can be simultaneously provided to polymeric substrates by surface coating with thin graphene layers. In addition, such coating process provides the substrates of: water-repellence, higher surface hardness, low-friction, self-lubrication, gas-barrier properties, and many other functionalities. Polyolefins have a non-polar nature and therefore graphene strongly sticks on their surface. Nano-crystalline graphite can be used as graphene precursor in some chemical processes (e.g., graphite oxide synthesis by the Hummer method), in addition it can be directly applied to the surface of a polyolefin substrate (e.g., polyethylene) to cover it by a thin graphene multilayer. In particular, the nano-crystalline graphite perfectly exfoliate under the application of a combination of shear and friction forces and the produced graphene single-layers perfectly spread and adhere on the polyethylene substrate surface. Such polymeric materials can be used as ITO (indium-tin oxide) substitute and in the fabrication of different electronic devices. Here the fabrication of transparent resistive deformation sensors based on low-density polyethylene films coated by graphene multilayers is described. Such devices are very sensible and show a high reversible and reproducible behavior.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Explicit integration of Friedmann's equation with nonlinear equations of state

In this paper we study the integrability of the Friedmann equations, when the equation of state for the perfect-fluid universe is nonlinear, in the light of the Chebyshev theorem. A series of important, yet not previously touched, problems will be worked out which include the generalized Chaplygin gas, two-term energy density, trinomial Friedmann, Born-Infeld, two-fluid models, and Chern-Simons modified gravity theory models. With the explicit integration, we are able to understand exactly the roles of the physical parameters in various models play in the cosmological evolution which may also offer clues to a profound understanding of the problems in general settings. For example, in the Chaplygin gas universe, a few integrable cases lead us to derive a universal formula for the asymptotic exponential growth rate of the scale factor, of an explicit form, whether the Friedmann equation is integrable or not, which reveals the coupled roles played by various physical sectors and it is seen that, as far as there is a tiny presence of nonlinear matter, conventional linear matter makes contribution to the dark matter, which becomes significant near the phantom divide line. The Friedmann equations also arise in areas of physics not directly related to cosmology. We provide some examples ranging from geometric optics and central orbits to soap films and the shape of glaciated valleys to which our results may be applied.

79 ASTRONOMY AND ASTROPHYSICS↗

TU-FG-BRB-09: Thermoacoustic Range Verification with Perfect Co-Registered Overlay of Bragg Peak onto Ultrasound Image

Purpose: The potential of particle therapy has not yet been fully realized due to inaccuracies in range verification. The purpose of this work was to correlate the Bragg peak location with target structure, by overlaying thermoacoustic localization of the Bragg peak onto an ultrasound image. Methods: Pulsed delivery of 50 MeV protons was accomplished by a fast chopper installed between the ion source and the inflector of the 88″ cyclotron at Lawrence Berkeley National Lab. 2 Gy were delivered in 2 µs by a beam with peak current of 2 µA. Thermoacoustic emissions were detected by a cardiac array and Verasonics V1 ultrasound system, which also generated a grayscale ultrasound image. 1024 thermoacoustic pulses were averaged before filtering and one-way beamforming focused signal onto the Bragg peak location with perfect co-registration to the ultrasound images. Data was collected in a room temperature water bath and gelatin phantom with a cavity designed to mimic the intestine, in which gas pockets can displace the Bragg peak. Experiments were performed with the cavity both empty and filled with olive oil. Results: In the waterbath overlays of the Bragg peak agreed with Monte Carlo simulations to within 800±170 µm. Agreement within 1.3 ± 0.2 mm was achieved in the gelatin phantom, although relative stopping powers were estimated only to first order from CT scans. Protoacoustic signals were detected after travel from the Bragg peak through 29 mm and 65 mm of phantom material when the cavity was empty and full of olive oil, respectively. Conclusion: Protoacoustic range verification is feasible with a commercial clinical ultrasound array, but at doses exceeding the clinical realm. Further optimization of both transducer array and injection line chopper is required to enable range verification within a 2 Gy dose limit, which would enable online adaptive treatment. This work was supported in part by a UWM Intramural Instrumentation Grant and by the Director, Office of Science, Office of Nuclear Physics, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. YMQ was supported by a UWM-OUR summer fellowship.

60 APPLIED LIFE SCIENCES↗

A magnetospheric energy principle extended to include neutral atmosphere

The problem of ideal magnetohydrodynamic stability of plasmas in a magnetosphere-atmosphere system, in which the unperturbed magnetic field is assumed to be perpendicular to the plasma-atmosphere interface (ionospheric surface), is investigated by means of an extended magnetospheric energy principle. The derivation of the principle and conditions under which it applies to a real terrestrial magnetosphere is given. In the principle, the atmosphere is considered to be a very heavy and compressible gas with finite pressure. A thin ionospheric layer is taken into account as boundary conditions, but energetics within it are neglected. The solid-earth surface is assumed to be a perfectly conducting wall for perturbations. For a perturbation that satisfies either rigid or horizontally free boundary conditions at the plasma-atmosphere interface, the self-adjointness of the force operator is satisfied and an extended magnetospheric energy principle can be developed on the basis of the extended energy principle for fusion plasmas. These two boundary conditions are shown to be realized in the magnetosphere when the ionospheric conductivity is either very large or very small. Whereas in fusion plasmas the perturbed magnetic energy in the vacuum makes a stabilizing contribution to the potential energy, in the magnetosphere the perturbed magnetic energy in the atmosphere makes no such stabilizing contribution. This is due to the difference of the assumed field configurations of the magnetospheric and fusion plasmas. The ionospheric surface makes a destabilizing negative contribution to the potential energy owing to a horizontal plasma displacement on the spherical ionospheric surface. The method is applied to magnetospheric ballooning and interchange instabilities. The existence of a new type of magnetospheric interchange instability is shown and its structure in the magnetosphere-atmosphere system is clarified. Possible consequences of the instabilities and their relevance to magnetospheric physics are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Flashback of Hydrogen-Methane Mixtures in a Fixed-Vane, Low-Swirl Burner at Atmospheric Pressure

Equivalence ratio at flashback, 𝜙FB, of low swirl injectors for 60% – 95% (H2, by mole) hydrogen-methane mixtures was determined experimentally in a < 100 kW atmospheric pressure burner. Pre-mixer velocities equaled 5, 7.5, and 10 m/s, with the reactants entering the burner at 294 K. The swirler design was selected following a literature review, and the test articles were additively manufactured. The test articles had two turning angles, 26° and 33°, with center-body hole diameters equaling 1.08 and 1.16 mm. A test article was built with each parameter combination, which yielded four test articles with measured swirl numbers varying from 0.43 to 0.49. The results showed agreement with prior work. 𝜙FB increased with increasing pre-mixer velocity and decreasing percent hydrogen. 𝜙FB was also observed to increase with swirl angle and decrease with increasing center-body hole diameter. The data was correlated using a semi-empirical quenching approach, with 𝐶quench=0.01, where the chemical time scale was calculated using a perfectly stirred reactor (PSR) model. Two different chemical kinetics mechanisms independently yielded the same results. The correlation makes the present small-scale laboratory results relevant to large, high-pressure gas turbines. The flashback data set is available for computational fluid dynamics (CFD) validation.

Searle, Matthew↗

Hawaii Play Fairway Analysis: Noble Gas Raw Data for Hawaii, Maui, Oahu, Kauai, and Lanai islands

Noble gas raw data for the Hawaiian islands of Big Island, Maui, Oahu, Lanai, and Kauai. Based on results from prior phases of the Hawaii Play Fairway Analysis, this project targeted 66 wells on the islands of Hawaii, Maui, Lanai, Oahu, and Kauai for sampling of dissolved noble gases, trace metals, common ions, and the stable isotopes 2H and 18O. Ultimately, 23 of the 66 well targets were sampled. Noble gas data from this study is supplemented with data shared by the United States Geologic Survey for the summit of Kilauea, and by the geothermal energy company Ormat Technologies Inc. for their geothermal power plant Puna Geothermal Venture on the Lower East Rift of Kilauea, and for their exploration of Kona and Hualalai on Hawaii, as well as the Southwest Rift of Haleakala on Maui. The noble gas helium is used as an indicator of geothermal heat when excess 3He and/or 4He is present when compared to the atmospheric ratio of those isotopes (R/Ra). R/Ra is minimally affected by dilution and transport, allowing even those wells not perfectly situated over a geothermal system to indicate a geothermal anomaly. R/Ra anomalies are present on every island in this study. There is a strong correlation between R/Ra anomalies and proximity to rift zones and calderas. The Hawaii Play Fairway project was funded by the U.S. Department of Energy Geothermal Technologies Office (award DE-EE0006729). For more information, see Colin Ferguson's Master of Science thesis "Exploration for Blind Geothermal Resources in the State of Hawaii Utilizing Dissolved Noble Gasses in Well Waters."

15 GEOTHERMAL ENERGY↗

Sensitivity of Multi-gas Climate Policy to Emission Metrics

Multi-gas greenhouse emission targets require that different emissions be combined into an aggregate total. The Global Warming Potential (GWP) index is currently used for this purpose, despite various criticisms of the underlying concept. It is not possible to uniquely define a single metric that perfectly captures the different impacts of emissions of substances with widely disparate atmospheric lifetimes, which leads to a wide range of possible index values. We examine the sensitivity of emissions and climate outcomes to the value of the index used to aggregate methane emissions using a technologically detailed integrated assessment model. We find that the sensitivity to index value is of order 4-14% in terms of methane emissions and 2% in terms of total radiative forcing, using index values between 4 and 70 for methane, with larger regional differences in some cases. The sensitivity to index value is much higher in economic terms, with total 2-gas mitigation cost decreasing 4-5% for a lower index and increasing 10-13% for a larger index, with even larger changes if the emissions reduction targets are small. The sensitivity to index value also depends on the assumed maximum amount of mitigation available in each sector. Evaluation of the maximum mitigation potential for major sources of non-CO2 greenhouse gases would greatly aid analysis

Smith, Steven J↗

Long-Term Carbon Injection Field Test for 90% Mercury Removal for a PRB Unit a Spray Dryer and Fabric Filter

The power industry in the U.S. is faced with meeting regulations to reduce the emissions of mercury compounds from coal-fired plants. Injecting a sorbent such as powdered activated carbon (PAC) into the flue gas represents one of the simplest and most mature approaches to controlling mercury emissions from coal-fired boilers. The purpose of this test program was to evaluate the long-term mercury removal capability, long-term mercury emissions variability, and operating and maintenance (O&M) costs associated with sorbent injection on a configuration being considered for many new plants. Testing was conducted by ADA Environmental Solutions (ADA) at Rocky Mountain Power’s (RMP) Hardin Station through funding provided by DOE/NETL, RMP, and other industry partners. The Hardin Station is a new plant rated at 121 MW gross that was first brought online in April of 2006. Hardin fires a Powder River Basin (PRB) coal and is configured with selective catalytic reduction (SCR) for NOx control, a spray dryer absorber (SDA) for SO2 control, and a fabric filter (FF) for particulate control. Based upon previous testing at PRB sites with SCRs, very little additional mercury oxidation from the SCR was expected at Hardin. In addition, based upon results from DOE/NETL Phase II Round I testing at Holcomb Station and results from similarly configured sites, low native mercury removal was expected across the SDA and FF. The main goal of this project was met—sorbent injection was used to economically and effectively achieve 90% mercury control as measured from the air heater (AH) outlet to the stack for a period of ten months. This goal was achieved with DARCO® Hg-LH, Calgon FLUEPAC®-MC PLUS and ADA Power PAC PREMIUM brominated activated carbons at nominal loadings of 1.5–2.5 lb/MMacf. An economic analysis determined the twenty-year levelized cost to be 0.87 mills/kW-hr, or $15,000/lb Hg removed. No detrimental effects on other equipment or plant operations were observed. The results of this project also filled a data gap for plants firing PRB coal and configured with an SCR, SDA, and FF, as many new plants are being designed today. Another goal of the project was to evaluate, on a short-term basis, the mercury removal associated with coal additives and coal blending with western bituminous coal. The additive test showed that, at this site, the coal additive known as KNX was affective at increasing mercury removal while decreasing sorbent usage. Coal blending was conducted with two different western bituminous coals, and West Elk coal increased native capture from nominally 10% to 50%. Two additional co-benefits were discovered at this site. First, it was found that native capture increased from nominally 10% at full load to 50% at low load. The effect is believed to be due to an increase in mercury oxidation across the SCR caused by a corresponding decrease in ammonia injection when the plant reduces load. Less ammonia means more active oxidation sites in the SCR for the mercury. The second co-benefit was the finding that high ammonia concentrations can have a negative impact on mercury removal by powdered activated carbon. For a period of time, the plant operated with a high excess of ammonia injection necessitated by the plugging of one-third of the SCR. Under these conditions and at high load, the mercury control system could not maintain 90% removal even at the maximum feed rate of 3.5 lb/MMacf (pounds of mercury per million actual cubic feet). The plant was able to demonstrate that mercury removal was directly related to the ammonia injection rate in a series of tests where the ammonia rate was decreased, causing a corresponding increase in mercury removal. Also, after the SCR was refurbished and ammonia injection levels returned to normal, the mercury removal performance also returned to normal. Another goal of the project was to install a commercial-grade activated carbon injection (ACI) system and integrate it with new-generation continuous emissions monitors for mercury (Hg-CEMs) to allow automatic feedback control on outlet mercury emissions. This was accomplished and the plant can now be operated to control carbon injection based on either the overall mercury removal or an outlet mercury emission rate. By integrating these systems, it was determined that the plant could reduce powdered activated carbon consumption, especially at low load, because, at Hardin, native mercury capture increases from less than 20% to about 50% at low load and the carbon injection rate can be decreased accordingly. Currently, the plant is operating to automatically control emissions to below 0.9 lb/TBtu (pounds of mercury per million British thermal units) at carbon loadings of 0.5 to 1.5 lb/MMacf. During the final phase of the Long-Term test, the ACI system was operated by plant personnel. The estimated O&M cost for a single Hg-CEM system is $15,500/yr. The Hg-CEMs performed well throughout the project. This project began shortly after Thermo Fisher first offered the Mercury Freedom System™ on a commercial basis and progressed though several iterations, improvements, and upgrades to the hardware and software. Indeed, there was a ten-fold increase in the precision and accuracy of the units during the course of the project due to several successful upgrades. In their present condition, the Hg-CEMs measure mercury to a precision of about ± 0.05 μg/wscm (micrograms of mercury per wet standard cubic meter of gas), and only require occasional fine-tuning of the calibration coefficients. The quality assurance/quality control (QA/QC) protocol required to keep the units operating at their optimal performance was also developed and perfected during the course of the project. ADA Environmental Solutions (ADA) developed a daily calibration procedure that surpasses the requirements specified in the Clean Air Mercury Rule (CAMR), and a weekly diagnostic program that ensures that the systems are operating properly and receive the necessary maintenance. For the most part, the systems passed the daily, weekly, and quarterly QA/QC requirements as well as four performance verification tests using the Ontario Hydro (O-H) and Sorbent Trap Methods (STM) for the first test and the EPA Method 30A (M30A) procedure for the remaining three. However, some improvements are still necessary before the system can meet all of the requirements. These involve tests that challenge the system with oxidized mercury (Hg+2). These tests could not be passed at Hardin in spite of trying several improvements suggested by ADA or Thermo Fisher.

20 FOSSIL-FUELED POWER PLANTS↗

Dark photon dark matter in the presence of inhomogeneous structure

Dark photon dark matter will resonantly convert into visible photons when the dark photon mass is equal to the plasma frequency of the ambient medium. In cosmological contexts, this transition leads to an extremely efficient, albeit short-lived, heating of the surrounding gas. Existing work in this field has been predominantly focused on understanding the implications of these resonant transitions in the limit that the plasma frequency of the Universe can be treated as being perfectly homogeneous, \ie neglecting inhomogeneities in the electron number density. In this work we focus on the implications of heating from dark photon dark matter in the presence of inhomogeneous structure (which is particularly relevant for dark photons with masses in the range $10^{-15} \, {\rm eV} \, \lesssim m_{A^\prime} \lesssim 10^{-12}$ eV), emphasizing both the importance of inhomogeneous energy injection, as well as the sensitivity of cosmological observations to the inhomogeneities themselves. More specifically, we derive modified constraints on dark photon dark matter from the Ly-$\alpha$ forest, and show that the presence of inhomogeneities allows one to extend constraints to masses outside of the range that would be obtainable in the homogeneous limit, while only slightly relaxing their strength. We then project sensitivity for near-future cosmological surveys that are hoping to measure the 21cm transition in neutral hydrogen prior to reionization, and demonstrate that these experiments will be extremely useful in improving sensitivity to masses near $\sim 10^{-14}$ eV, potentially by several orders of magnitude. Finally, we discuss implications for reionization, early star formation, and late-time $y$-type spectral distortions, and show that probes which are inherently sensitive to the inhomogeneous state of the Universe could resolve signatures unique to the light dark photon dark matter scenario, and thus offer a fantastic potential for a positive detection.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Li2[SeC2Se] · 2 NH3: A Crystalline Ammoniate with a-Se-C=C-Se- Dianion

Reaction of Li2C2 with elemental selenium in a molar ratio of 1:2 in liquid ammonia led to the formation of the ammoniate Li2[SeC2Se] ? 2 NH3. Its crystal structure was solved and refined from high-resolution synchrotron powder diffraction data (P21/c, Z = 4). It contains the ?Se-C?C-Se? anion, unprecedented in a crystalline material, whose existence was corroborated by IR/Raman spectra and electronic-structure theory, showing an almost perfect agreement with calculated spectra. Elaborated magnetic-bottle and velocity-map imaging photoelectron spectroscopic investigations show that the ?Se-C?C-Se? radical anion can be transferred to the gas phase, where it was analyzed by NIPE (Negative Ion Photoelectron) and VMI (Velocity-Map Imaging) spectra, which correlate nicely with simulated spectra based on 2?u ? 3Sg – and 2?u ?1Sg + transitions including spin-orbit couplings

Hetzert, Marc↗

On shocks driven by high-mass planets in radiatively inefficient disks. I. Two-dimensional global disk simulations

Recent observations of gaps and non-axisymmetric features in the dust distributions of transition disks have been interpreted as evidence of embedded massive protoplanets. However, comparing the predictions of planet–disk interaction models to the observed features has shown far from perfect agreement. This may be due to the strong approximations used for the predictions. For example, spiral arm fitting typically uses results that are based on low-mass planets in an isothermal gas. In this work, we describe two-dimensional, global, hydrodynamical simulations of disks with embedded protoplanets, with and without the assumption of local isothermality, for a range of planet-to-star mass ratios 1–10 M{sub J} for a 1 M{sub ⊙} star. We use the Pencil Code in polar coordinates for our models. We find that the inner and outer spiral wakes of massive protoplanets (M≳5 M{sub J}) produce significant shock heating that can trigger buoyant instabilities. These drive sustained turbulence throughout the disk when they occur. The strength of this effect depends strongly on the mass of the planet and the thermal relaxation timescale; for a 10 M{sub J} planet embedded in a thin, purely adiabatic disk, the spirals, gaps, and vortices typically associated with planet–disk interactions are disrupted. We find that the effect is only weakly dependent on the initial radial temperature profile. The spirals that form in disks heated by the effects we have described may fit the spiral structures observed in transition disks better than the spirals predicted by linear isothermal theory.

79 ASTRONOMY AND ASTROPHYSICS↗

The Effect of the Method by Which a High-Resistivity GaN Buffer Layer Is Formed on Properties of InAlN/GaN and AlGaN/GaN Heterostructures with 2D Electron Gas

AlGaN/AlN/GaN and InAlN/AlN/GaN structures with 2D electron gas have been grown on sapphire substrates by metal-organic vapor-phase epitaxy. The suppression of the parasitic conductivity of buffer GaN layers was provided either by intentionally raising the density of edge dislocations or by doping with iron (GaN:Fe). It was shown that using GaN buffer layers with a better crystal perfection and more planar surface results in the electron mobility in the 2D channel for carriers becoming 1.2–1.5 times higher.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exploration for Blind Geothermal Resources in the State of Hawaii Utilizing Dissolved Noble Gasses in Well Waters

This study is an extension of the Hawaii Play Fairway Analysis (PFA), a statewide geothermal exploration project funded by the United States Department of Energy. Based on results from prior phases of the PFA, this project targeted 66 wells on the islands of Hawaii, Maui, Lanai, Oahu, and Kauai for sampling of dissolved noble gases, trace metals, common ions, and the stable isotopes 2H and 18O. Ultimately, 23 of the 66 well targets were sampled. The noble gas helium is used as an indicator of geothermal heat when excess 3He and/or 4He is present when compared to the atmospheric ratio of those isotopes (R/Ra). R/Ra is minimally affected by dilution and transport, allowing even those wells not perfectly situated over a geothermal system to indicate a geothermal anomaly. R/Ra anomalies are present on every island in this study. There is a strong correlation between R/Ra anomalies and proximity to rift zones and calderas. Across the islands R/Ra ranged from 15-16 on Kilauea's lower east rift zone, which is a mantle plume value, to 0.37 on Lanai, which is a crustal value. The majority of anomalous well samples had R/Ra values consistent with an upper mantle source. Mixing between upper mantle and crustal helium is evident on all islands. Geographically, R/Ra decreases from the high at Kilauea to upper mantle values at Mauna Loa, and remains at upper mantle values for all wells across the other volcanoes, with the exception of two of four sampled wells on Lanai.

15 GEOTHERMAL ENERGY↗

A new model for the dynamic of criticality excursions in fissile solutions - 14446

A recent international inter-code comparison exercise for criticality excursion analysis demonstrated that the transient criticality codes participating the exercise are showed to reproduce well the initial peak power compared with measurements performed with TRACY and SILENE reactors. However the oscillatory behavior after peak power is less well reproduced. The integrated behavior in term of energy release is quite well reproduced. The recent experiments performed with TRACY JAEA's reactor and the analytic interpretation of void clustering during prompt critical have suggested a simplified vibration model of a damped oscillator. Finally a recent ICNC paper by present authors offered a perfect correlation between peak pressure and peak power. Owing to these three facts the present paper aims at proposing a new system of equations for the dynamic of a critical excursion taking into account gas bubble generation after exceeding the solubility threshold of dissolved radiolytic gas. The model explains why the simple vibration model of the JAEA school fairly represent pressure dynamic records at moderate peak pressure as measured with SILENE reactor. Also, an important parameter of the proposed model, namely the rate of transfer from dissolved gas to gas bubbles, is fixed by the correlation between peak pressure and peak power. Thus the model has one less tunable parameter and can predict a large range of critical low pressure excursions. After presentation of the model and discussion of some of its important features, some numerical simulations are made based upon SILENE and TRACY transient experiments ranging from tenths of kPa to several bars and comparisons are presented between calculated results and experimentally recorded one's. (authors)

42 ENGINEERING↗

A transient site balance model for atomic layer etching

We present a transient site balance model of plasma-assisted atomic layer etching of silicon (Si) with alternating exposure to chlorine gas (Cl 2 ) and argon ions (Ar + ). Molecular dynamics (MD) simulation results are used to provide parameters for the model. The model couples the dynamics of a top monolayer surface region ('top layer') and a perfectly mixed subsurface region ('mixed layer'). The differential equations describing the rates of change of the Cl coverage in the two layers are transient mass balances. Model predictions include Cl coverages and rates of etching of various species from the surface as a function of Cl 2 or Ar + fluence. The simplified phenomenological model reproduces the MD simulation results well over a range of conditions. Comparing model predictions directly to experimental optical emission spectroscopy data, as reported in a previous paper, provides further evidence of the accuracy of the model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamical correlation effects on structure factor of spin-polarized two-dimensional electron gas

We report a theoretical study on static density structure factor S(q) of a spin-polarized two-dimensional electron gas over a wide range of electron number density r{sub s}. The electron correlations are treated within the dynamical version of the self-consistent mean-field theory of Singwi, Tosi, Land, and Sjolander, the so-called qSTLS approach. The calculated S(q) exhibits almost perfect agreement with the quantum Monte Carlo simulation data at r{sub s}=1. However, the extent of agreement somewhat diminishes with increasing r{sub s}, particularly for q around 2k{sub F}. Seen in conjunction with the success of qSTLS theory in dealing with correlations in the unpolarized phase, our study suggests that the otherwise celebrated qSTLS theory is not that good in treating the like-spin correlations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Well Integrity for Natural Gas Storage in Depleted Reservoirs and Aquifers

Introduction Motivation The 2015-2016 Aliso Canyon/Porter Ranch natural gas well blowout emitted approximately 100,000 tonnes of natural gas (mostly methane, CH 4 ) over four months. The blowout impacted thousands of nearby residents, who were displaced from their homes. The high visibility of the event has led to increased scrutiny of the safety of natural gas storage at the Aliso Canyon facility, as well as broader concern for natural gas storage integrity throughout the country. Federal Review of Well Integrity In April of 2016, the U.S. Department of Energy (DOE), in conjunction with the U.S. Department of Transportation (DOT) through the Pipeline and Hazardous Materials Safety Administration (PHMSA), announced the formation of a new Interagency Task Force on Natural Gas Storage Safety. The Task Force enlisted a group of scientists and engineers at the DOE National Laboratories to review the state of well integrity in natural gas storage in the U.S. The overarching objective of the review is to gather, analyze, catalogue, and disseminate information and findings that can lead to improved natural gas storage safety and security and thus reduce the risk of future events. The “Protecting our Infrastructure of Pipelines and Enhancing Safety Act of 2016’’ or the ‘‘PIPES Act of 2016,’’which was signed into law on June 22, 2016, created an Aliso Canyon Natural Gas Leak Task Force led by the Secretary of Energy and consisting of representatives from the DOT, Environmental Protection Agency (EPA), Department of Health and Human Services, Federal Energy Regulatory Commission (FERC), Department of Commerce and the Department of Interior. The Task Force was asked to perform an analysis of the Aliso Canyon event and make recommendations on preventing similar incidents in the future. The PIPES Act also required that DOT/PHMSA promulgate minimum safety standards for underground storage that would take effect within two years. Background on the DOE National Laboratories Well Integrity Work Group One of the primary areas that the Task Force is studying is integrity of natural gas wells at storage facilities. The DOE Office of Fossil Energy (FE) took the lead in this area and asked scientists and engineers from the National Energy Technology Laboratory (NETL), Lawrence Livermore National Laboratory (LLNL), Sandia National Laboratories (SNL), and Lawrence Berkeley National Laboratory (LBNL)) to form a Work Group to address this area. This Work Group is an expansion of the original “Lab Team” comprising scientists and engineers from SNL, LLNL, and LBNL which was formed to support the State of California’s response to the Aliso Canyon incident and operated under the Governor of California’s Aliso Canyon Emergency Order (1/6/2016). The Lab Team played a key role in advising the State of California’s Department of Conservation (DOC) in its oversight of SoCalGas during and after the incident.

03 NATURAL GAS↗