Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHOSPHATE GLASS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Solid lubrication design methodology, phase 2

The high temperature performance of solid lubricated rolling elements was conducted with a specially designed traction (friction) test apparatus. Graphite lubricants containing three additives (silver, phosphate glass, and zinc orthophosphate) were evaluated from room temperature to 540 C. Two hard coats were also evaluated. The evaluation of these lubricants, using a burnishing method of application, shows a reasonable transfer of lubricant and wear protection for short duration testing except in the 200 C temperature range. The graphite lubricants containing silver and zinc orthophosphate additives were more effective than the phosphate glass material over the test conditions examined. Traction coefficients ranged from a low of 0.07 to a high of 0.6. By curve fitting the traction data, empirical equations for slope and maximum traction coefficient as a function of contact pressure (P), rolling speed (U), and temperature (T) can be developed for each lubricant. A solid lubricant traction model was incorporated into an advanced bearing analysis code (SHABERTH). For comparison purposes, preliminary heat generation calculations were made for both oil and solid lubricated bearing operation. A preliminary analysis indicated a significantly higher heat generation for a solid lubricated ball bearing in a deep groove configuration. An analysis of a cylindrical roller bearing configuration showed a potential for a low friction solid lubricated bearing.

Pallini, R. A.↗

Large Core Highly Doped Fiber Amplifiers

We have demonstrated amplification of nanosecond optical pulses to the millijoule level using ytterbium-doped phosphate glass fibers. Fibers with 35 um and 49 um diameter cores produced up to 700 uJ and 2.25 mJ pulses, respectively, with pulse durations less than 10 ns. By tapering the diameter of the fiber from single-mode to multi-mode, we were able to produce output with a nearly lowest-order-mode spatial profile in 35 um-core fibers that were inherently multimode. We report on progress in five areas of amplifier development: (1) pulse energy, (2) fundamental mode propagation in multi-mode fibers, (3) phosphate glass fiber processing, (4) highly doped gain fiber modeling, and (5) amplification of single-frequency pulses at 2 um wavelength.

42 ENGINEERING↗

Vitrification of High-Level Waste: how to Select the Best Suited Technology - 18117

Since more than 30 years now, a number of countries have selected and operated vitrification as the best industrial practice for safely and durably immobilizing the most active liquid waste. This now significant worldwide experience covers a wide range of waste compositions, from concentrated alkaline defense waste sludges with a variety of salts and chemicals (Na, Fe, Al, Cr, sulphate,... ) to relatively clear acidic HLLW from commercial, low salt, PUREX-type processes, waste that include dissolved cladding material (Al, Mg, stainless steel), waste that include high levels of noble metals and fines... The activity levels vary from 40- year old defense waste to relatively young waste from high burn-up commercial fuel. The current throughputs vary from about 5 kg/h of glass to about 90 kg/h of glass per melter. Even higher throughputs are currently being considered for Hanford facility for instance. In order to cope with the range of waste compositions, glass compositions have also evolved from low melting temperature borosilicate or phosphate glass to glass or glass ceramics with higher melting temperatures. More complex matrices are currently under study in a number of countries, to immobilize more complex waste and / or increase waste loadings. Each challenge is unique and, for each challenge, it is necessary to select the best combination of waste form and technology. For instance for very active solutions with high levels of noble metal particles that could settle, increase apparent glass viscosity, and impact electrical conductivity, one would select borosilicate glass in the mechanically-stirred hot wall induction melter with bottom pouring that has proven its efficiency in industrial conditions at La Hague. For high glass throughputs with low solids in a borosilicate melt (typically Defense waste), ceramic melters have proven their reliability and efficiency. For matrices that need higher temperatures, or with very high corrosiveness, Cold-Crucible Induction Melters are now considered, with one first industrial implementation at La Hague to produce borosilicate glass and a glass-ceramic. All these technologies have been improved over the years to increase throughput, waste loading, melting temperature, reliability... Other types of waste are now being studied worldwide, and for each, it is necessary to carefully select the adapted waste form and technology. The technologies studied will range from traditional technologies (such as hot-wall induction melter technology and liquid-fed ceramic melter technologies) to the more recent advanced technologies (such as Cold Crucible Induction Melter or Advanced Ceramic melters). In addition, the field of vitrification is extending to other types of waste; the current advances in this field will also be described. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Efficient wide-aperture neodymium glass rod amplifiers

Amplifiers based on neodymium phosphate glass rods 60 - 100 mm in diameter are experimentally studied. The amplifiers are pumped by INP-16/250 tubular flash lamps placed in a universal pump cavity with a two-section mirror reflector. A compact high-voltage capacitive energy storage with a preionisation circuit was developed to supply the lamps. (lasers)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Femtosecond laser structuring of silver-containing glass: Silver redistribution, selective etching, and surface topology engineering

Femtosecond direct laser writing in silver-containing phosphate glasses allows for the three-dimensional (3D) implementation of complex photonic structures. Sample translation along or perpendicular to the direction of the beam propagation has been performed, which led to the permanent formation of fluorescent structures, either corresponding to a tubular shape or to two parallel planes at the vicinity of the interaction voxel, respectively. These optical features are related to significant modifications of the local material chemistry. Indeed, silver depletion areas with a diameter below 200 nm were evidenced at the center of the photo-produced structures while photo-produced luminescence properties are attributed to the formation of silver clusters around the multiphoton interaction voxel. The laser-triggered oxidation-reduction processes and the associated photo-induced silver redistribution are proposed to be at the origin of the observed original 3D luminescent structures. Thanks to such material structuring, surface engineering has been also demonstrated. Selective surface chemical etching of the glass has been obtained subsequently to laser writing at the location of the photo-produced structures, revealing features with nanometric depth profiles and radial dimensions strongly related to the spatial distributions of the silver clusters.

36 MATERIALS SCIENCE↗

RPL Dosimetry: Principles and Applications

The principle of radio-photoluminescence (RPL) is applied to the glass dosimeter, which is one of the most excellent solid state dosimeters. The silver activated phosphate glass irradiated with ionizing radiations emits luminescence when exposed to UV light. This phenomenon is called RPL. The most characteristic features of the glass dosimeters are data accumulation and no fading. The basic principle of RPL is described and then how it is applied to the glass dosimeter is explained. Finally some applications of RPL will be introduced.

61 RADIATION PROTECTION AND DOSIMETRY↗

Ionic Conductivity And Structural Relaxation Studies on Lithium Niobophosphate Glass

Niobium pentoxide (Nb{sub 2}O{sub 5}) increases the chemical and thermal stability of otherwise hygroscopic alkali phosphate glasses and also enhances the conduction characteristics. Ion dynamics and structural relaxation have been investigated for mol%50Li{sub 2}0-45P{sub 2}0{sub 5}-5Nb{sub 2}O{sub 5}. The non-linearity parameter 'x' in the Tool-Narayanaswamy model is evaluated using the dependence of fictive and glass transition temperatures on the cooling and heating rates.

36 MATERIALS SCIENCE↗

FT-IR and thermoluminescence investigation of P{sub 2}O{sub 5}-BaO-K{sub 2}O glass system

The 0.5P{sub 2}O{sub 5}⋅xBaO⋅(0.5−x)K{sub 2}O glass system (0≤x≤0.5mol%) is investigated by FT-IR and thermoluminescence as a possible dosimetic material. FT-IR spectra show structural network modifications with the composition variations of the studied glasses. The predominant absorption bands are characterized by two broad peaks near 500 cm{sup −1}, two weak peaks around 740 cm{sup −1} and three peaks in the 900–1270 cm{sup −1} region. The shift in the position of the band assigned to asymmetric stretching of PO{sub 2}{sup −} group, υ{sub as}(PO{sub 2}{sup −}) modes from ∼1100 cm{sup −1} to 1085 cm{sup −1} and the decrease in its relative intensity with the increasing of K{sub 2}O content shows a network modifier role of this oxide.. Luminescence investigations show that by adding modifier oxides in the phosphate glass a dose dependent TL signals result upon irradiation. Thus P{sub 2}O{sub 5}–BaO–K{sub 2}O glass system is a possible candidate material for dosimetry in the dose 0 – 50 Gy range.

36 MATERIALS SCIENCE↗

Zero photoelastic and water durable ZnO–SnO–P{sub 2}O{sub 5}–B{sub 2}O{sub 3} glasses

We report properties of zero birefringent xZnO–(67–x)SnO–(33–y)P{sub 2}O{sub 5}–y B{sub 2}O{sub 3} glasses, within 18.5 ≤ x ≤ 22 and y = 0, 3, and 10 mol. %. These compositions of boro-phosphate glasses provide both zero photoelastic constant (PEC) and improved water durability. x = 19 and y = 3 compositions show minimum PEC of −0.002 × 10{sup −12} Pa{sup −1}, which can contribute to candidate material for fiber current sensor devise without lead. The structures of zero photoelastic glasses were investigated by Raman scattering and nuclear magnetic resonance spectroscopies. Compositions of zero PEC glasses are explained by the empirical model proposed by Zwanziger et al. [Chem. Mater. 19, 286-290 (2007)].

36 MATERIALS SCIENCE↗

Nd : glass rod laser with an output energy of 500 J

The energy of two orthogonally polarised pulses injected into an available multistage amplifier based on neodymium phosphate glass rods was increased from 300 to 500 J (in both pulses). The second output pulse with an energy of 200 J will be used to pump an additional parametric amplifier of a petawatt laser. (extreme laser radiation: physics and fundamental applications)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Identification of Leakage Spectra from Neutron Activation in Glass/Cherenkov Detectors - Paper 96

Oak Ridge National Laboratory has developed a new detector system concept that can be deployed in major US cities to identify the leakage spectrum of a nuclear weapon detonation. The detector is based on a small piece of glass that has been doped with an element that has a high activation cross section and creates a radioactive activation product with a reasonable length half-life. The decay of the activation product(s) after exposure creates Cherenkov light which can propagate to a photomultiplier and can be turned into a count-rate signal. The signal from each glass in each detector in a city can be individually analyzed to determine the amount of activation products produced in the initial exposure. Several activation products can be determined in a single glass if the half-lives are not the same. With a known source location and a detailed 3D model of a city, neutron transport simulations can be made by using a library of known sources to predict the activation amounts each source would have made in the glass detectors. A simple comparison of the measured activation amounts and the predicted activation amounts can identify the source spectrum contained in the library that is the best match. Choosing dopants with a large range in the threshold energy for the activation reactions can help to differentiate the spectra in the library. The method of matching the measured activation amounts to the predicted activation amounts to identify the source spectrum is similar to the analysis used for the passive Activation Foil Integrated Detector System (AFIDS), also developed at Oak Ridge National Laboratory. In AFIDS, wires or foils of known mass and isotopic composition are deployed before and then collected after exposure. Counting gammas in a nearby laboratory determines the activation amounts. The glass/Cherenkov system is active - it uses a battery-powered detector to count flashes of Cherenkov light and to communicate its count rates to a remote location for further analysis. Work has been performed in several areas, including glass making, automated detection and communication systems and software tools for analysis of the signal and source spectrum identification. Bell and Boatner have developed phosphate glasses that incorporate elements with high capture cross sections, and Hayward has simulated the response with Geant4 and measured the response with isotopic gamma sources. This paper will focus on the software tools for determining the activation amounts from the Cherenkov count-rate signal and finding the best matching source spectrum. A test problem in an urban environment is used to demonstrate the potential of a spectrum identification system using neutron activation. The analysis methods developed to identify the neutron leakage spectra from Cherenkov light given off by neutron activation in doped glasses work well. The calculation used to unfold the count-rate information into the number of actual activation products uses robust algorithms that can also compute associated uncertainties. These uncertainties and the known uncertainties of the glass tube material compositions are incorporated into the matching analysis to determine which of the source spectra in the library best matches the measured activation data. Any measurement method used to identify a neutron source spectrum relies at some point on a comparison against known sources; no identification method is definitive. Detection systems measure some physical aspect of the source, not its serial number. Many systems measure the physical aspect to determine that the source has some property, and then leave it to experts to determine which potential sources share that property. The analysis system presented here incorporates the comparison into the analysis itself. The statistical tests show which of the known library sources match the measured data the best and whether that match is a good match. If the best match still does not fit the measured data well (a very high χ{sup 2} value), that indicates the true source is not one of the sources in the library. This is still valuable information for decision makers. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Large optics for the National Ignition Facility

The National Ignition Facility (NIF) laser with its 192 independent laser beams is not only the world’s largest laser, it is also the largest optical system ever built. With its 192 independent laser beams, the NIF requires a total of 7648 large-aperture (meter-sized) optics. One of the many challenges in designing and building NIF has been to carry out the research and development on optical materials, optics design, and optics manufacturing and metrology technologies needed to achieve NIF’s high output energies and precision beam quality. This paper describes the multiyear, multi-supplier, development effort that was undertaken to develop the advanced optical materials, coatings, fabrication technologies, and associated process improvements necessary to manufacture the wide range of NIF optics. The optics include neodymium-doped phosphate glass laser amplifiers; fused silica lenses, windows, and phase plates; mirrors and polarizers with multi-layer, high-reflectivity dielectric coatings deposited on BK7 substrates; and potassium di-hydrogen phosphate crystal optics for fast optical switches, frequency conversion, and polarization rotation. Also included is a discussion of optical specifications and custom metrology and quality-assurance tools designed, built, and fielded at supplier sites to verify compliance with the stringent NIF specifications. In addition, a brief description of the ongoing program to improve the operational lifetime (i.e., damage resistance) of optics exposed to high fluence in the 351-nm (3ω) is provided.

36 MATERIALS SCIENCE↗

Femtosecond single-beam direct laser poling of stable and efficient second-order nonlinear optical properties in glass

We depict a new approach for the localized creation in three dimensions (3D) of a highly demanded nonlinear optical function for integrated optics, namely second harmonic generation. We report on the nonlinear optical characteristics induced by single-beam femtosecond direct laser writing in a tailored silver-containing phosphate glass. The original spatial distribution of the nonlinear pattern, composed of four lines after one single laser writing translation, is observed and modeled with success, demonstrating the electric field induced origin of the second harmonic generation. These efficient second-order nonlinear structures (with χ{sub eff}{sup (2)} ∼ 0.6 pm V{sup −1}) with sub-micron scale are impressively stable under thermal constraint up to glass transition temperature, which makes them very promising for new photonic applications, especially when 3D nonlinear architectures are desired.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multiple rare-earth ion environments in amorphous ( G d 2 O 3 ) 0.230 ( P 2 O 5 ) 0.770 revealed by gadolinium K -edge anomalous x-ray scattering

A Gd K-edge anomalous X-ray scattering (AXS) study is performed on the rare-earth (R) phosphate glass, (Gd 2 O 3 ) 0.230 (P 2 O 5 ) 0.770 , in order to determine Gd…Gd separations in its local structure. The minimum rare-earth separation is of particular interest given that the optical properties of these glasses can quench when rare-earth ions become too close to each other. To this end, a weak Gd…Gd pairwise correlation is located at 4.2(1) Å which is representative of a meta-phosphate R…R separation. More intense first neighbor Gd…Gd pairwise correlations are found at the larger radial distributions, 4.8(1) Å, 5.1(1) Å and 5.4(1) Å. These reflect a mixed ultra-phosphate and meta-phosphate structural character, respectively. A second neighbor Gd…Gd pairwise correlation lies at 6.6(1) Å which is indicative of meta-phosphate structures. Meta- and ultra-phosphate classifications are made by comparing the R…R separations against those of rare-earth phosphate crystal structures, R(PO 3 ) 3 and RP 5 O 14 respectively, or difference pair distribution function (ΔPDF) features determined on similar glasses using difference neutron scattering methods. The local structure of this glass is therefore found to display multiple rare-earth ion environments, presumably because its composition lies between these two stoichiometric formulae. These Gd…Gd separations are well resolved in the ΔPDFs that represent the AXS signal. Indeed, the spatial resolution is so good that it also enables the identification of R…X (X = R, P, O) pairwise correlations up to r ~ 9 Å; their average separations lie at r ~ 7.1(1) Å, 7.6(1) Å 7.9(1) Å, 8.4(1) Å and 8.7(1) Å. This is the first report of a Gd K-edge AXS study on an amorphous material. Its demonstrated ability to characterize the local structure of a glass up to such a long-range of r, heralds exciting prospects for AXS studies on other ternary non-crystalline materials. However, the technical challenge of such an experiment should not be underestimated, as is highlighted in this work where probing AXS signal near the Gd K-edge is found to produce inelastic X-ray scattering that precludes the normal AXS methods of data processing. Furthermore, it is shown that AXS results are not only tractable but they also reveal local structure of rare-earth phosphate glasses that is important from a materials-centered perspective and which could not be obtained by other materials characterization methods.

36 MATERIALS SCIENCE↗

On the Mechanism of Absorption and Restoration of Radiation Transmission in the Channel of Small-Scale Self-Focusing of a Short Laser Pulse in Neodymium Glass

When diagnosing a small-scale self-focusing (SSSF) channel of a 0.5-ns laser pulse with an intensity of 3–5 GW/cm{sup 2} in neodymium glasses, an absorption jump was detected (with a front of ≈0.5 ns) at wavelengths of 1.06 and 0.66 μm in addition to filament-like damage typical of SSSF, spectral broadening, and laser radiation scattering. The absorption coefficient reached 0.15 cm{sup –1}, and transmission in the medium was restored during 15–35 ns for phosphate glass and 5–10 ns for silicate glass. The physical bases of this effect of the appearance and relaxation of absorption in glasses have not been previously presented. An analysis of the experimental data showed that the absorption jump is due to the fast population of the {sup 4}I{sub 11/2} level of Nd{sup 3+} ions in glasses when nonlinear processes occur in the SSSF channel such as stimulated Raman scattering and broadening of the laser pulse spectrum. The relaxation time of the population at the {sup 4}I{sub 11/2} level and the restoration of transmission in glasses after the termination of the laser pulse are determined by the characteristic sizes of the Nd{sup 3+} ions excitation regions arising in the samples upon interference of the laser and scattered radiation, as well as the thermophysical characteristics of the glasses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evaluation of GlassNet for physics-informed machine learning of glass stability and glass-forming ability

Glassy materials form the basis of many modern applications, including nuclear waste immobilization, touch-screen displays, and optical fibers, and also hold great potential for future medical and environmental applications. However, their structural complexity and large composition space make design and optimization challenging for certain applications. Of particular importance for glass processing and design is an estimate of a given composition's glass-forming ability (GFA). However, there remain many open questions regarding the underlying physical mechanisms of glass formation, especially in oxide glasses. It is apparent that a proxy for GFA would be highly useful in glass processing and design, but identifying such a surrogate property has proven itself to be difficult. While glass stability (GS) parameters have historically been used as a GFA surrogate, recent research has demonstrated that most of these parameters are not accurate predictors of the GFA of oxide glasses. Here, in this work, we explore the application of an open-source pre-trained neural network model, GlassNet, that can predict the characteristic temperatures necessary to compute GS with reasonable performance and assess the feasibility of using these physics-informed machine learning (PIML)-predicted GS parameters to estimate GFA. In doing so, we track the uncertainties at each step of the computation—from the original ML prediction errors to the compounding of errors during GS estimation, and finally to the final estimation of GFA. While GlassNet exhibits reasonable accuracy on all individual properties, we observe a large compounding of error in the combination of these individual predictions for the PIML prediction of GS, finding that random forest models offer similar accuracy to GlassNet. We also break down the performance of GlassNet on different glass families and find that the error in GS prediction is correlated with the error in crystallization peak temperature prediction. Lastly, we utilize this finding to assess the relationship between top-performing GS parameters and GFA for two ternary glass systems: sodium borosilicate and sodium iron phosphate glasses. We conclude that to obtain true ML predictive capability of GFA, significantly more data needs to be collected.

36 MATERIALS SCIENCE↗