Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA DISPERSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

The scattering of energetic particles by waves in a finite beta plasma

Solutions are presented for the dispersion relation of waves propagating parallel to the ambient magnetic field, in a plasma having an arbitrary ratio of thermal to magnetic pressure, beta. Previous results applicable only to wave frequencies much lower than the ion cyclotron frequency are extended to include all frequencies lower than the electron cyclotron frequency. The cyclotron turnovers are found to occur at significantly lower frequencies in finite beta plasmas. Cyclotron damping is significant for small wavelength waves. These results show that in energetic particle scattering by electromagnetic turbulence in a plasma with beta value greater than 40, scattering by waves with wave frequencies greater than the ion cyclotron frequency can be neglected. This condition is satisfied in many astrophysical plasmas.

Davila, J. M.↗

Relationship of dusk sector radial electric field to energy dispersion at the inner edge of the electron plasma sheet

It is shown that, by assuming that the magnetospheric particle boundaries are the result of steady state convection, the electron boundaries in the dusk sector are essentially sensitive to the local, not the global, electric field configuration. A simple, direct relationship is obtained between the dusk sector radial electric field and the inner edge of electron boundaries at various energies.

Horwitz, J. L.↗

Stability of an inhomogeneous two-component plasma with magnetic viscosity

The stability of a semiinfinite quasi-neutral inhomogeneous plasma with magnetic viscosity has been discussed by using JWKB approximation in which the parameters are regarded slowing varying. Dispersion relation is obtained and discussed. It is found that the inhomogeneous system is unstable for all perturbations with k(y) = 0. A dispersion relation for homogeneous plasma is also obtained and discussed. It is shown that fast and slow-MHD waves propagate in the homogeneous plasma in the limit of almost perpendicular propagation under certain conditions.

Kumar, Nagendra↗

Ion acoustic waves in a multi-ion plasma.

An exact treatment of the multispecies ion acoustic dispersion relation is given for an argon/helium plasma. Phase velocity and damping are obtained as a function of ion-electron temperature ratio and relative densities of the two species. There are two important modes in the plasma, with quite different phase velocities, which are referred to as principal heavy ion mode and principal light ion mode. Which of these is dominant depends on the relative densities of the two components, but, in general, the light ion mode becomes important for surprisingly small light ion contamination. Approximate analytic expressions are derived from damping rates and phase velocities and their domains of validity are investigated. Relevance of the results for the investigation of collisionless shocks is discussed.

Fried, B. D.↗

Rate effects on instabilities in slightly ionized plasmas

Results are presented of numerical computer calculations of dispersive wave growth rates in slightly ionized plasmas. The effects of employing a plasma model with detailed consideration of rate and radiative processes involving the electron quantum states were studied. Acoustic and electrothermal waves in unseeded argon are found to be frozen with the latter damped. Rate thermal modes can exhibit large growth. Mode mixing and switching in both seeded and unseeded argon are demonstrated.

Harstad, K. G.↗

Spark plasma sintering of fuel meats for U 3 O 8 based dispersion fuels

Research and test reactors often use dispersion-type fuel due to its increased thermal conductivity and burn-up capabilities compared to conventional fuel. Al-U 3 O 8 (aluminumtriuranium octaoxide) dispersion fuels have several advantages over their competitors, such as higher service temperature and better stability of oxygen stoichiometry. However, the two-step fabrication of dispersion fuel causes undesirable porosity in cold-pressed fuel meats that is preserved in co-extruded fuel plates. To combat this, spark plasma sintering (SPS) was used for the fabrication of Al-15, 20, and 30 vol% U 3 O 8 and 8 and 12 vol% Mo-U 3 O 8 fuel meats for the Al-U 3 O 8 time. The in situ SPS data was used to construct and validate Master Sintering Curves (MSCs) with accuracies in Al fuels at 0.02 g/cm 3 , and Mo fuels at 0.07 and 0.17 g/cm 3 . The as-sintered fuel meats were characterised using x-ray diffraction (XRD) and scanning electron microscopy (SEM) to understand chemical and physical changes following the SPS process. The pellets exhibited very high relative densities, the U 3 O 8 was observed to undergo reduction to UO 2 .

Aluminium↗

Plasma boundaries in the inner magnetosphere

Based principally on data collected aboard the DE 1 and 2 spacecraft during the October 7 to December 1, 1981 period, plasma boundaries in the inner magnetosphere are studied. Results indicate that in the evening sector, the low-energy ion transition and the 100-eV inner edge of the electron plasma sheet are coincident with each other, with the field lines threading the 100-eV equatorward edge of the auroral electron precipitation, and with variations in magnetic activity. A characteristic energy dispersion, observed in the plasma sheet inner edges at 100 eV, 1 keV and 10 keV, with the lower energy boundaries located earthward of the higher energy boundaries, is shown to increase from the midnight sector toward dusk, and to decrease with increasing magnetic activity. In the evening sector, these boundaries are shown to be accurate signatures of the boundary between closed and open convection trajectories, and the characteristic electron energy sheet dispersion is found to be similarly governed by the convection pattern such that the inner edges may be seen as the Alfven layers at those energies.

Horwitz, J. L.↗

Passivation of pigment particles for thermal control coatings

Five powders were received for plasma calcining during this report period. The particle size using a fluid energy mill, and obtained pigments that could be plasma calcined. Optimum results are obtained in the plasma calcining of zinc orthotitanate when finely dispersed particles are subjected to a calculated plasma temperature of 1670 C. Increasing the plasma calcining time by using multiple passes through the plasma stabilized the pigment to vacuum UV irradiation was evidenced by the resulting ESR spectra but slightly decreased the whiteness of the pigment. The observed darkening is apparently associated with the formation of Ti(+3) color centers.

Farley, E. P.↗

Detached plasma in Saturn's front side magnetosphere

Plasma observations in the outer front side Saturnian magnetosphere are discussed which indicate the existence of dense flux tubes outside the plasma sheets. It is suggested that flux tubes are detached from the plasma sheet by a centifugally driven flute instability. The same instability leads to a dispersal of Titan-injected plasma. It is shown that the detached flux tubes will probably break open as they convect into the nightside magnetotail and lose their content in the form of a planetary wind.

Goertz, C. K.↗

Detailed measurements of the H beta line shape in a transient plasma using a fiber optics slit system

Through the use of fiber optics, a series of very narrow slits have been constructed and placed at the exit plane of a spectrograph. Plasma radiation which is dispersed by the spectrograph is incident on the slits and is transmitted to separate phototubes via the quartz fibers. With this technique, time resolved measurements of the spectral shape of the hydrogen H beta line have been made and used to determine the electron density of a transient plasma. Data obtained in a shock tube indicated that the thermodynamic conditions behind the reflected shock in a mixture of 20 percent H 80 percent He correspond to theoretically predicted conditions.

Stickford, G. H., Jr.↗

Detailed measurements of the H beta line shape in a transient plasma using a fiber optics slit system.

Through the use of fiber optics, a series of very narrow slits have been constructed and placed at the exit plane of a spectrograph. Plasma radiation which is dispersed by the spectrograph is incident on the slits and is transmitted to separate phototubes via the quartz fibers. With this technique, time resolved measurements of the spectral shape of the hydrogen H beta line have been made and used to determine the electron density of a transient plasma. Data obtained in a shock tube indicated that the thermodynamic conditions behind the reflected shock in a mixture of 20% H2-80% He, at incident shock speeds of 12 to 14 km/sec and pressures of 66.6 to 133.3 N/sq m (0.5 to 1.0 mm Hg), correspond to theoretically predicted conditions. Immediately behind the incident shock at speeds of 17 to 24 km/sec the data indicate that the plasma reached equilibrium then demonstrated a drop in intensity which has been attributed to radiative cooling.

Stickford, G. H., Jr.↗

Ponderomotive force in a warm two-fluid plasma

A general expression for the ponderomotive force of electromagnetic field with slowly varying amplitude in a warm plasma is obtained in the collisionless two-fluid model. Compared to the existing expression obtained for a cold and stationary plasma, this result contains two additional terms for the general case. One of them is involved with the density gradient and the wavenumber derivative of the dielectric tensor of a plasma. Thus, for an inhomogeneous plasma, it accounts for the effects of spatial dispersion, hence of finite temperature of the plasma. The other term is proportional to the time derivative of the density and the frequency derivative of the dielectric tensor, and is nonzero unless the plasma is stationary or nondispersive. Inclusion of these new terms in the ponderomotive force will enable self-consistent analysis of the general behavior of nonlinear waves with finite wavelengths in a warm plasma.

Lee, N. C.↗

Impact of impurities on peeling–ballooning modes and turbulence in tokamak plasmas

This study investigates the impact of various impurity species on peeling–ballooning (PB) modes and microturbulence in tokamak plasmas through the extension of traditional two-fluid and gyro-landau-fluid (GLF) models. By incorporating finite Larmor radius (FLR) effects, the analysis provides a comprehensive understanding of impurity-driven impact and its interaction with plasma turbulence. Depending on charge state and local plasma conditions, heavy impurities may exhibit gyro-radii larger than those of main ions, which are captured in the extended GLF model presented. Following the presentation of modified two-fluid equations incorporating impurity effects, we systematically analyze the distinctions between impurity and main ion dynamics and their resultant feedback mechanisms on plasma behavior. Derivation of the linear dispersion relation enables quantification of impurity-mediated modifications to: plasma vorticity, diamagnetic drift and gyroviscous effects, electron Hall physics, and FLR effects. BOUT++ – based linear simulations corroborate this formalism, demonstrating systematic stabilization of PB modes upon impurity seeding. And then operational implications for practical impurity control strategies in tokamak devices are proposed. The results underscore the necessity of impurity management to maintain stability and optimize plasma confinement, with specific focus on how FLR effects contribute to transport dynamics. This work paves the way for enhanced modeling and simulation efforts, supporting the development of strategies to control impurity-induced turbulence and improve overall reactor performance.

BOUT++ simulation↗