Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA RADIAL PROFILES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Radial variation of the solar wind speed between 1 and 15 AU

Pioneer 10 and 11 solar wind speeds measured between 1.4 and 15.2 AU are compared with those of IMP 6, 7, and 8 measured at 1 AU for 90-day intervals centered on six solar radial alignments between 1973 and 1978. The time profile of the solar wind speed undergoes change as the distance from the sun increases, which is due to interaction of adjacent solar wind streams. Speed variations are smaller at greater radial distance and both the highest and lowest speeds disappear as radial distance increases. For periods with extremely high speed solar wind streams, the mean solar wind speed decreases as the distance from the sun increases, which must be due to the disappearance of the highest speeds of the streams with increasing distance. It is concluded that at distances from the sun greater than 30-40 AU, the solar wind behavior may closely resemble that of a radially expanding constant speed plasma.

Collard, H. R.↗

The Circumstellar Medium of Cassiopeia A Inferred from the Outer Ejecta Knot Properties

We investigate the effect of the circumstellar medium density profile on the X-ray emission from outer ejecta knots in the Cassiopeia A supernova remnant using the 1 Ms Chandra observation. The spectra of a number of radial series of ejecta knots at various positions around the remnant are analyzed using techniques similar to those devised in previous papers. We can obtain a reasonable match to our data for a circumstellar density profile proportional to r(sup -2) as would arise from the steady dense wind of a red supergiant, but the agreement is improved if we introduce a central cavity around the progenitor into our models. Such a profile might arise if the progenitor emitted a, fast tenuous stellar wind for a short period immediately prior to explosion. We review other lines of evidence supporting this conclusion. The spectra also indicate the widespread presence of Fe-enriched plasma that was presumably formed by complete Si burning during the explosion, possibly via alpha-rich freezeout. This component is typically associated with hotter and more highly ionized gas than the bulk of the O- and Si-rich ejecta.

Hwang, Una↗

Mercury ion thruster research, 1978

The effects of 8 cm thruster main and neutralizer cathode operating conditions on cathode orifice plate temperatures were studied. The effects of cathode operating conditions on insert temperature profiles and keeper voltages are presented for three different types of inserts. The bulk of the emission current is generally observed to come from the downstream end of the insert rather than from the cathode orifice plate. Results of a test in which the screen grid plasma sheath of a thruster was probed as the beam current was varied are shown. Grid performance obtained with a grid machined from glass ceramic is discussed. The effects of copper and nitrogen impurities on the sputtering rates of thruster materials are measured experimentally and a model describing the rate of nitrogen chemisorption on materials in either the beam or the discharge chamber is presented. The results of optimization of a radial field thruster design are presented. Performance of this device is shown to be comparable to that of a divergent field thruster and efficient operation with the screen grid biased to floating potential, where its susceptibility to sputter erosion damage is reduced, is demonstrated.

Wilbur, P. J.↗

Downhole Elemental Analysis with LIBS

In this paper we discuss a novel instrument, currently under development at Honeybee Robotics with SBIR funding from NASA. The device is designed to characterize elemental composition as a function of depth in non-terrestrial geological formations. The instrument consists of a miniaturized laser-induced breakdown spectrometer (LIBS) analyzer integrated in a 2" diameter drill string. While the drill provides subsurface access, the LIBS analyzer provides information on the elemental composition of the borehole wall. This instrument has a variety of space applications ranging from exploration of the Moon for which it was originally designed, to Mars, as well as a variety of terrestrial applications. Subsurface analysis is usually performed by sample acquisition through a drill or excavator, followed by sample preparation and subsequent sample presentation to an instrument or suite of instruments. An alternative approach consisting in bringing a miniaturized version of the instrument to the sample has many advantages over the traditional methodology, as it allows faster response, reduced probability of cross-contamination and a simplification in the sampling mechanisms. LIBS functions by focusing a high energy laser on a material inducing a plasma consisting of a small fraction of the material under analysis. Optical emission from the plasma, analyzed by a spectrometer, can be used to determine elemental composition. A triangulation sensor located in the sensor head determines the distance of the sensor from the borehole wall. An actuator modifies the position of the sensor accordingly, in order to compensate for changes due to the profile of the borehole walls. This is necessary because LIBS measurements are negatively affected by changes in the relative position of the focus of the laser with respect to the position of the sample (commonly referred to as the "lens to sample distance"). Profiling the borehole is done by adjusting the position of the sensor with a vertical stage; a second actuator at the top of the downhole probe allows radial scanning of the borehole. Analysis of iron and titanium in lunar simulant with LIBS was performed in air using the method of standard addition. The results for lunar simulant NU-LHT-2M show a value for the concentration of iron ranging between 2.29% and 3.05% depending on the atomic line selected. The accepted value for the sample analyzed is 2.83%, showing the capability for the system in development to provide qualitative and semi-quantitative analysis in real-time.

Moreschini, Paolo↗

Persistence of solar wind features

Using data from the plasma and magnetometer experiments on board the Voyagers 1 and 2 during the approach to Jupiter, solar wind persistence is investigated over the period from January 1978 (Voyager 1 passing by Voyager 2) through February 1979. The trajectories of both spacecraft provided a unique opportunity to study the radial evolution and variation of the solar wind over about 3 AU, and to analyze the persistence of solar wind features along the radially increasing separation distance of both Voyagers. Some emphasis is placed on a period of DOY (day of year) 152 through 212, 1978, in which the observed propagation delay time of solar wind signatures between both Voyagers significantly deviates from the expected delay time. A decrease in the correlation coefficient of the corresponding Voyager 1 and 2 data profiles indicates a remarkable change of the solar wind flow. This period in question coincides to a great extent with the interval V of June-July 1978, selected by STIP (Study of Travelling Interplanetary Phenomena).

Rucker, H. O.↗

Low-frequency macroscopic instabilities of fully ionized magnetoplasma

Studies are described of low-frequency quasi-static instabilities in a fully ionized plasma. The plasma is assumed to be immersed in a uniform magnetic field, and is either uniform or has a number density gradient perpendicular to the magnetic field. A moment equation description of the ion and electron dynamics is used; collisions are assumed to have a strong effect on electron motion along the magnetic field. Before considering specific modes, a stability analysis is developed which allows a classification of wave growth characteristics to be made for a bounded system from solutions to the dispersion relation for an infinite system. Also, a method is given for calculating the normal mode frequencies and wave profiles by using the reflection coefficients at the boundaries. For wave propagation perpendicular to the magnetic field, the flute wave is studied in cylindrical geometry. The destabilizing effect of a radial electric field is considered by solving a differential equation.

Rognlien, T. D.↗

Ionospheric electron-content measurements during the second space-plasma negative-ion experiment (SPINEX-2)

The second space-plasma negative-ion experiment (SPINEX-2), a chemical-release active experiment to investigate negative-ion effects in the ionospheric F region, is described by Mendillo et al. (1982). This paper describes the electron-content measurements in somewhat more detail than would be appropriate there. The circumstances of the experiment, particularly the use of a vehicle with a very high spin rate, presented some unusual challenges during interpretation of the electron-content data. These are described. The resulting profiles show clearly that the chemical release caused a very significant 'hole' in the ionosphere. Under certain fairly realistic assumptions, the actual number of free electrons removed from the region of the peak of the ionospheric F layer is estimated to be about 4 x 10 to the 25th. The same assumptions lead to a simple radial distribution of the depleted region about the rocket trajectory in the neighborhood of the release.

Fulford, J. A.↗

RHESSI and Trace Observations of the 21 April 2002 X1.5 Flare

Observations of the X1.5 flare on 21 April 2002 are reviewed using the Ramaty High Energy Solar Spectroscopic Imager (RHESSI) and the Transition Region and Coronal Explorer (TRACE). The major findings are as follows: 1. The 3-25 keV X-rays started 54 mins before the EUV (195 A) emission suggesting that the initial energy release heated plasma directly to 220 MK, well above the 1.6 MK needed to produce the Fe XII (195 A) line. 2. Using coaligned 12-25 keV RHESSI and TRACE images, further evidence is found for the existence of hot (15-20 MK) plasma in the 195 A passband. This hot, diffuse emission is attributed to the presence of the Fe XXIV (192 A) line within the TRACE 195 A passband. 3. The 12-25 keV source centroid moves away from the limb with an apparent velocity of approx. 9.9 km/ s, slowing to approx. 1.7 km/ s after 3 hours, its find altitude being approx. 120 Mm after approx. 12 hours. This suggests that the energy release site moves to higher altitudes in agreement with classical flare models. 4. The 50-100 keV emission correlates well with EUV flare ribbons, suggesting thick-target interactions at the footpoints of the magnetic arcade. The 50-100 keV time profile matches the time derivative of the GOES light curve (Neupert effect), which suggests that the same electrons that produced the thick-target hard X-ray emission also heat the plasma seen in soft X-rays. 5. X-ray footpoint emission has an E(sup -3) spectrum down to approx. 10 keV suggesting a lower electron cutoff energy than previously thought. 6. The hard X-ray (25-200 keV) peaks have FWHM durations of approx. 1 min suggesting a more gradual energy release process than expected. 7. The TRACE images reveal a bright symmetric front propagating away from the main flare site at speeds of greater than or = 120 km/ s. This may be associated with fast CME observed several minutes later by LASCO. 8. Dark sinuous lanes are observed in the TRACE images that extend almost radially from the post-flare loop system. This "fan of spines" becomes visible well into the decay phase of the flare and shows evidence for both lateral and downward motions.

Gallagher, Peter T.↗

Langmuir Probe Measurements Within the Discharge Channel of the 20-kW NASA-300M and NASA-300MS Hall Thrusters

NASA is presently developing a high-power, high-efficiency, long-lifetime Hall thruster for the Solar Electric Propulsion Technology Demonstration Mission. In support of this task, studies have been performed on the 20-kW NASA-300M Hall thruster to aid in the overall design process. The ability to incorporate magnetic shielding into a high-power Hall thruster was also investigated with the NASA- 300MS, a modified version of the NASA-300M. The inclusion of magnetic shielding would allow the thruster to push existing state-of-the-art technology in regards to service lifetime, one of the goals of the Technology Demonstration Mission. Langmuir probe measurements were taken within the discharge channels of both thrusters in order to characterize differences at higher power levels, as well as validate ongoing modeling efforts using the axisymmetric code Hall2De. Flush-mounted Langmuir probes were also used within the channel of the NASA-300MS to verify that magnetic shielding was successfully applied. Measurements taken from 300 V, 10 kW to 600 V, 20 kW have shown plasma potentials near anode potential and electron temperatures of 4 to 12 eV at the walls near the thruster exit plane of the NASA-300MS, verifying magnetic shielding and validating the design process at this power level. Channel centerline measurements on the NASA-300M from 300 V, 10 kW to 500 V, 20 kW show the electron temperature peak at approximately 0.1 to 0.2 channel lengths upstream of the exit plane, with magnitudes increasing with discharge voltage. The acceleration profiles appear to be centered about the exit plane with a width of approximately 0.3 to 0.4 channel lengths. Channel centerline measurements on the NASA-300MS were found to be more challenging due to additional probe heating. Ionization and acceleration zones appeared to move downstream on the NASA-300MS compared to the NASA-300M, as expected based on the shift in peak radial magnetic field. Additional measurements or alternative diagnostics will be needed to verify peak electron temperatures in the NASA-300MS and compare them with model predictions.

Hall thruster↗

The flow of the contaminated solar wind at comet P/Grigg-Skjellerup

On July 10, 1992, the Giotto spacecraft encountered a second comet, namely, P/Grigg-Skjellerup. Despite the small production rate of this comet (approximately 2 orders of magnitude smaller than that of P/Halley and 1 order of magnitude smaller than that of P/Giacobini-Zinner) the plasma flow showed several distinct flow transitions. We have applied theoretical models, previously developed to explain the existence and location of the flow boundaries at comets P/Giacobini-Zinner and P/Halley to this new data set for comet P/Grigg-Skjellerup. The observed bow shock crossings are used to evaluate the production rate of the cometary neutrals. Using this production rate, the position of the collisionopause and the ionopause are estimated. The observed location of the magnetic pile-up boundary corresponds well to the theoretical calculations. We also find the reason that a magnetic field-free region was not encountered was because the ionopause, while being sharp, was inside the spacecraft trajectory which had an estimated closest approach distance greater than 120 km. Finally we have used the observed spatial profile of the solar wind magnetic field together with a simple one-dimemsional, multispecies chemical model to calculate the radial density profiles of the H2O group ions outside the bow shock. Comparsion of the calculated total H2O group ion density profile with observations indicates a good fit in the inner region where the H2O ion dominates. While the corresponding fit in the outer region, where the O(+) ion dominates, becomes progressively less satisfactory with increasing cometocentric distance, it is noted that the observations themselves are believed to be less reliable at theses large distances.

Flammer, K. R.↗

Ion temperature profiles in the horns of the plasma sheet

The plasma sheet horns are the low-altitude extensions of the plasma sheet that lie poleward of the plasmasphere and equatorward of the tail lobes. Within the horns, magnetic field lines of increasing geomagnetic latitudes map to increasing distances into the downtail plasma sheet. Plasma data from the fast plasma experiment on ISEE 2 have been analyzed for 11 outbound crossings of the horns in the premidnight sector of the magnetosphere at typical altitudes of 2-4 R(E). These crossings typically occurred on time scales of less than 1 hour, providing almost instantaneous snapshots of plasma gradients within the horns. Ion temperatures observed during these crossings generally decreased by a factor of four to eight as magnetic field lines of increasing geomagnetic latitude were traversed. If we make the reasonable assumption that the ion temperatures are constant along the field lines within the plasma sheet, then this result implies that the ion temperatures in the downtail plasma sheet also commonly decrease by this same factor over the radial range extending from the inner edge of the plasma sheet at the plasmapause boundary to the outer edge at a neutral line in the distant tail.

Suszcynsky, D. M.↗

Empirical modeling of the quiet time nightside magnetosphere

Empirical modeling of plasma pressure and magnetic field for the quiet time nightside magnetosphere is investigated. Two models are constructed for this study. One model, referred to here as T89R, is basically the magnetic field model of Tsyganenko (1989) but is modified by the addition of an inner eastward ring current at a radial distance of approximately 3 RE as suggested by observation. The other is a combination of the T89R model and the long version of the magnetic field model of Tsyganenko (1987) such that the former dominates the magnetic field in the inner magnetosphere while the latter prevails in the distant tail. The distribution of plasma pressure which is required to balance the magnetic force for each of these two field models is computed along the tail axis in the midnight meridian. The occurrence of pressure anisotropy in the inner magnetospheric region is also taken into account by determining an empirical fit to the observed plasma pressure anisotropy. This represents the first effort to obtain the plasma pressure distribution in force equilibrium with magnetic stresses from an empirical field model with the inclusion of pressure anisotropy. The inclusion of pressure anisotropy alters the plasma pressure by as much as a factor of approximately 3 in the inner magnetosphere. The deduced plasma pressure profile along the tail axis is found to be in good agreement with the observed quiet time plasma pressure for geocentric distances between approximately 2 and approximately 35 RE.

Lui, A. T. Y.↗

Empirical modeling of the quiet time nightside magnetosphere

Empirical modeling of plasma pressure and magnetic field for the quiet time nightside magnetosphere is investigated. Two models are constructed for this study. One model, referred to here as T89R, is basically the magnetic field model of Tsyganenko (1989) but is modified by the addition of an inner eastward ring current at a radial distance of approximately 3 R(sub E) as suggested by observation. The other is a combination of the T89R model and the long version of the magnetic field model of Tsyganenko (1987) such that the former dominates the magnetic field in the inner magnetosphere, whereas the latter prevails in the distant tail. The distribution of plasma pressure, which is required to balance the magnetic force for each of these two field models, is computed along the tail axis in the midnight meridian. The occurrence of pressure anisotropy in the inner magnetospheric region is also taken into account by determining an empirical fit to the observed plasma pressure anisotropy. This effort is the first attempt to obtain the plasma pressure distribution in force equilibrium with magnetic stresses from an empirical field model with the inclusion of pressure anisotropy. The inclusion of pressure anisotropy alters the plasma pressure by as much as a factor of approximately 3 in the inner magnetosphere. The deduced plasma pressure profile along the tail axis is found to be in good agreement with the observed quiet time plasma pressure for geocentric distances between approximately 2 and approximately 35 R(sub E).

Lui, A. T. Y.↗

Robotic Variable Polarity Plasma Arc (VPPA) Welding

The need for automated plasma welding was identified in the early stages of the Space Station Freedom Program (SSFP) because it requires approximately 1.3 miles of welding for assembly. As a result of the Variable Polarity Plasma Arc Welding (VPPAW) process's ability to make virtually defect-free welds in aluminum, it was chosen to fulfill the welding needs. Space Station Freedom will be constructed of 2219 aluminum utilizing the computer controlled VPPAW process. The 'Node Radial Docking Port', with it's saddle shaped weld path, has a constantly changing surface angle over 360 deg of the 282 inch weld. The automated robotic VPPAW process requires eight-axes of motion (six-axes of robot and two-axes of positioner movement). The robot control system is programmed to maintain Torch Center Point (TCP) orientation perpendicular to the part while the part positioner is tilted and rotated to maintain the vertical up orientation as required by the VPPAW process. The combined speed of the robot and the positioner are integrated to maintain a constant speed between the part and the torch. A laser-based vision sensor system has also been integrated to track the seam and map the surface of the profile during welding.

Jaffery, Waris S.↗

Relation Between Type II Bursts and CMEs Inferred from STEREO Observations

The inner coronagraph (COR1) of the Solar Terrestrial Relations Observatory (STEREO) mission has made it possible to observe CMEs in the spatial domain overlapping with that of the metric type II radio bursts. The type II bursts were associated with generally weak flares (mostly B and C class soft X-ray flares), but the CMEs were quite energetic. Using CME data for a set of type II bursts during the declining phase of solar cycle 23, we determine the CME height when the type II bursts start, thus giving an estimate of the heliocentric distance at which CME-driven shocks form. This distance has been determined to be approx. 1.5Rs (solar radii), which coincides with the distance at which the Alfven speed profile has a minimum value.We also use type II radio observations from STEREO/WAVES and Wind/WAVES observations to show that CMEs with moderate speed drive either weak shocks or no shock at all when they attain a height where the Alfven speed peaks (approx. 3Rs - 4Rs). Thus the shocks seem to be most efficient in accelerating electrons in the heliocentric distance range of 1.5Rs to 4Rs. By combining the radial variation of the CME speed in the inner corona (CME speed increase) and interplanetary medium (speed decrease) we were able to correctly account for the deviations from the universal drift-rate spectrum of type II bursts, thus confirming the close physical connection between type II bursts and CMEs. The average height (approx 1.5Rs) of STEREO CMEs at the time of type II bursts is smaller than that (2.2Rs) obtained for SOHO (Solar and Heliospheric Observatory) CMEs. We suggest that this may indicate, at least partly, the density reduction in the corona between the maximum and declining phases, so a given plasma level occurs closer to the Sun in the latter phase. In two cases, there was a diffuse shock-like feature ahead of the main body of the CME, indicating a standoff distance of 1Rs - 2Rs by the time the CME left the LASCO field of view.

Solar Energetic Particles↗

Relation Between Type II Bursts and CMEs Inferred from STEREO Observations

The inner coronagraph (COR1) of the Solar Terrestrial Relations Observatory (STEREO) mission has made it possible to observe coronal mass ejections (CMEs) a in the spatial domain overlapping with that of the metric type II radio bursts. The type II bursts were associated with generally weak flares (mostly B and C class soft X-ray flares), but the CMEs were quite energetic. Using CME data for a set of type II bursts during the declining phase of solar cycle 23, we determine the CME height when the type II bursts start, thus giving an estimate of the heliocentric distance at which CME-driven shocks form. This distance has been determined to be approximately 1.5Rs (solar radii), which coincides with the distance at which the Alfv?n speed profile has a minimum value. We also use type II radio observations from STEREO/WAVES and Wind/WAVES observations to show that CMEs with moderate speed drive either weak shocks or no shock at all when they attain a height where the Alfv?n speed peaks (?3Rs ? 4Rs). Thus the shocks seem to be most efficient in accelerating electrons in the heliocentric distance range of 1.5Rs to 4Rs. By combining the radial variation of the CME speed in the inner corona (CME speed increase) and interplanetary medium (speed decrease) we were able to correctly account for the deviations from the universal drift-rate spectrum of type II bursts, thus confirming the close physical connection between type II bursts and CMEs. The average height (approximately 1.5 Rs) of STEREO CMEs at the time of type II bursts is smaller than that (2.2 Rs) obtained for SOHO (Solar and Heliospheric Observatory) CMEs. We suggest that this may indicate, at least partly, the density reduction in the corona between the maximum and declining phases, so a given plasma level occurs closer to the Sun in the latter phase. In two cases, there was a diffuse shock-like feature ahead of the main body of the CME, indicating a standoff distance of 1Rs - 2Rs by the time the CME left the LASCO field of view.

Gopalswamy, N.↗

Observational goals for Max '91 to identify the causative agent for impulsive bursts

Recent studies of impulsive hard x ray and microwave bursts suggest that a propagating causative agent with a characteristic velocity of the order of 1000 km/s is responsible for these bursts. The results of these studies are summarized and observable distinguishing characteristics of the various possible agents are highlighted, with emphasis on key observational goals for the Max '91 campaigns. The most likely causative agents suggested by the evidence are shocks, thermal conduction fronts, and propagating modes of magnetic reconnection in flare plasmas. With new instrumentation planned for Max '91, high spatial resolution observations of hard x ray sources have the potential to identify the agent by revealing detailed features of source spatial evolution. Observations with the Very Large Array and other radio imaging instruments are of great importance, as well as detailed modeling of coronal loop structures to place limits on their density and temperature profiles. With the combined hard x ray and microwave imaging observations, aided by loop model results, the simplest causative agent to rule out would be the propagating modes of magnetic reconnection. To fit the observational evidence, reconnection modes would need to travel at approximately the same velocity (the Alfven velocity) in different coronal structures that vary in length by a factor of 10(exp 3). Over such a vast range in loop lengths, it is difficult to believe that the Alfven velocity is constant. Thermal conduction fronts would be suggested by sources that expand along the direction of B and exhibit relatively little particle precipitation. Particle acceleration due to shocks could produce more diverse radially expanding source geometries with precipitation at loop footprints.

Batchelor, D. A.↗

Spectroscopic, orbital, and physical properties of the binary Feige 24 and detection of transient He II absorption in the system

We have obtained new high-dispersion optical spectroscopy at Kitt Peak National Observatory (KPNO) and new International Ultraviolet Explorer (IUE) spectroscopy of the white dwarf+red dwarf binary system Feige 24. The optical range shows a composite DA+dM spectrum, together with H I Balmer and He I emission. The orbital phase dependence of the emission shows that it results from extreme ultraviolet (EUV) light reprocessing in the red dwarf upper atmosphere. The systems close enough and hot enough to show this reprocessing signature only recently emerged from common-envelope evolution. The ultraviolet spectrum exclusively emanates from the white dwarf and shows numerous heavy element absorption lines. We measured accurate radial velocities of the red dwarf component motion, traced by both optical absorption and emission lines, and new radial velocities of the white dwarf, traced by ultraviolet Fe V lines. Combining these measurements, we refined the orbital parameters presented by Vennes et al. (1991), and we confirmed that the white dwarf gravitational redshift is exceptionally small with 9 +/- 2 km/s. From this we deduced that the interior is either pure helium or carbon with a thick hydrogen layer, and we derived, for the combined interior compositions, a white dwarf mass and radius of M(sub WD) = 0.44-050 solar mass and R(sub WD) = 0.028-0.036 solar radius. We suggest that Feige 24 could be a typical case of close binary evolution leading to the formation of a low-mass helium white dwarf. The mass of the red dwarf and the inclination of the system naturally follow: M(sub dM) = 0.26-0.33 solar mass, i greater than or equal to 75 deg. High-dispersion H-alpha line profiles are asymmetrical, strongly enhanced toward the blue, suggesting a moving atmosphere possibly linked to a mass loss rate of 10(exp -10) solar mass/yr. The IUE spectra taken when the system is near inferior conjunction show strong He II 1640 A absorption. The profile is highly variable in width and intensity. Because it is correlated with the passage of the white dwarf at inferior conjunction, the absorption may occur in some foreground plasma emanated by the red dwarf and accumulating near a Lagrangian point or, alternatively, it may originate in an accretion spot on the white dwarf surface coaligned with the major orbital axis. Either way, the He II detection may imply substantial mass loss from the red dwarf with a corollary reclassification of Feige 24 as a mixed He/H DAO white dwarf resulting from accretion of secondary mass-loss material. Feige 24 is the prototype of a class of young, EUV-emitting, binary systems comprising a late main sequence secondary and a hot H-rich white dwarf; the class is characterized by optical and ultraviolet photospheric He II absorption, circumstellar C IV lambda (1550) absorption, and by the presence of EUV-induced, phase-dependent Balmer fluorescence. These young systems present the best opportunity to constrain theory of common-envelope evolution.

Vennes, Stephane↗