Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLUTONIUM COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

X-ray diffraction, differential scanning calorimetry and evolved gas analysis of aged plutonium tetrafluoride (PuF4)

A 30 year-old PuF4 sample consisting of brown powder (PuF4-b) and pink granules (PuF4-p) was analyzed. X-ray difraction shows the bulk is comprised of three compounds: PuF4, PuO2, and PuF4·1.6H2O. Broadening of PuF4 XRD peaks suggests possible a-damage. After annealing at 650 °C, crystalline PuF4 and PuO2 remain. Thermogravimetric analysis and diferential scanning calorimetry—with simultaneous evolved gas analysis—of the separated PuF4-p and PuF4-b components reveal a distinct sequence of reactions. Dehydration occurs between~90 and 300 °C. Exothermic annealing of the a-damage occurs in two stages: at 350–355 °C and at 555–558 °C. Hydrofuoric acid, fuorine and helium desorb during the frst exotherm. Above 700 °C, PuF4 reacts with PuO2, resulting in oxygen release and mass loss.

PuF4, dsc, differential scanning calorimetry, plut↗

Coordination Chemistry of Homoleptic Actinide(IV)-Thiocyanate Complexes

Here, the synthesis, X-ray crystal structure, vibrational and optical spectroscopy for the eight-coordinate thiocyanate compounds, [Et 4 N] 4 [Pu IV (NCS) 8 ], [Et 4 N] 4 [Th IV (NCS) 8 ], and [Et 4 N] 4 [Ce III (NCS) 7 (H 2 O)] are reported. Thiocyanate was found to rapidly reduce plutonium to Pu III in acidic solutions (pH<1) in the presence of NCS – . The optical spectrum of [Et 4 N][SCN] containing Pu III solution was indistinguishable from that of aquated Pu III suggesting that inner-sphere complexation with [Et 4 N][SCN] does not occur in water. However, upon concentration, the homoleptic thiocyanate complex [Et 4 N] 4 [Pu IV (NCS) 8 ] was crystallized when a large excess of [Et 4 N][NCS] was present. This compound, along with its U IV analogue, maintains inner-sphere thiocyanate coordination in acetonitrile based on the observation of intense ligand-to-metal charge-transfer bands. Spectroscopic and crystallographic data do not support the interaction of the metal orbitals with the ligand π system, but support an enhanced An IV –NCS interaction, as the Lewis acidity of the metal ion increases from Th to Pu.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combustion Synthesis of Transuranic-doped Ceramics for Nuclear Waste Immobilization

Utilizing the devised SCS technique, crystalline transuranic-doped zirconate pyrochlores were formed for the first time without the need for a subsequent heating step. Typically, materials rapidly synthesized in a single-step self-sustaining exothermic reaction require further heating to induce crystallization and purify the product. The need for this secondary processing step can be attributed to factors such as an improper oxidizer to fuel ratio and the utilization of strong complexing compounds as fuels (i.e., reducing agents), all of which hinder complete combustion. The efficacy of the developed process was demonstrated by fabricating crystalline plutonium-doped Gd2Zr2O7 from solutions containing metal nitrates and urea in a properly tuned ratio

Burton-Allen, Janiya D.↗

TC-99 Decontaminant from heat treated gaseous diffusion membrane -Phase I, Part B

Uranium gaseous diffusion cascades represent a significant environmental challenge to dismantle, containerize and dispose as low-level radioactive waste. Baseline technologies rely on manual manipulations involving direct access to technetium-contaminated piping and materials. There is a potential to utilize novel decontamination technologies to remove the technetium and allow for on-site disposal of the very large uranium converters. Technetium entered these gaseous diffusion cascades as a hexafluoride complex in the same fashion as uranium. Technetium, as the isotope Tc-99, is an impurity that follows uranium in the first cycle of the Plutonium and Uranium Extraction (PUREX) process. The technetium speciation or exact form in the gaseous diffusion cascades is not well defined. Several forms of Tc-99 compounds, mostly the fluorinated technetium compounds with varying degrees of volatility have been speculated by the scientific community to be present in these cascades. Therefore, there may be a possibility of using thermal or leaching desorption, which is independent of the technetium oxidation states, to perform an insitu removal of the technetium as a volatile species and trap the radionuclide on sorbent traps which could be disposed as low-level waste. Based on the positive results of the first part of this work1 the use of steam as a thermal decontamination agent was further explored with a second piece of used barrier material from a different location. This new series of tests included exposing more of the material surface to the flow of high temperature steam through the change in the reactor design, subjecting it to alternating periods of stream and vacuum, as well as determining if a lower temperature steam, i.e., 121°C (250°F) would be effective, too. Along with these methods, one other simpler method involving the leaching of the Tc-99 contaminated barrier material with a 1.0 M aqueous solution of ammonium carbonate, with and without sonication, was evaluated.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Experimental and quantum mechanical characterization of an oxygen-bridged plutonium(IV) dimer

We report the synthesis and characterization of K 4 {[PuCl 2 (NO 3 ) 3 ] 2 (μ 2 -O)}·H 2 O, which contains the first known μ 2 -oxo bridge between two Pu IV metal centers. Adding to its uniqueness is the Pu-(μ 2 -O) bond length of 2.04 Å, which is the shortest of other analogous compounds. The Pu-(μ 2 -O)-Pu bridge is characterized by the mixing of s -, d -, and p -orbitals from Pu with the p -orbitals of O; the 5 f -orbitals do not participate in bonding. Natural bond orbital analysis indicates that Pu and O interact through one 3c-2e σ Pu-O-Pu and two 3c-2e π Pu-O-Pu bonding orbitals and that the electron density is highly polarized on the μ 2 -O. Bond topology properties analysis indicates that the Pu-(μ 2 -O) bond shares both ionic and covalent character. Quantum mechanical calculations also show that the dimer has multiconfigurational ground states, where the nonet, septet, quintet, triplet, and singlet are close in energy. This work demonstrates the interplay between experimental and computational efforts that is required to understand the chemical bonding of Pu compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Co-operativity among defect sites in AnO2+ and An4O9 (An = U, Np or Pu)

Actinide dioxides derived from the AnO{sub 2} fluorite lattice are of high technological relevance due to their application in nuclear reactor fuels. Oxidation of AnO{sub 2} compounds emerges as a central theme in fuel fabrication, reactor operation, long-term storage forms for both spent fuels and surplus weapons materials, and environmental actinide migration. In this paper, we use density functional theory calculations to study the oxidation of uranium, neptunium and plutonium dioxides, AnO{sub 2} (An = U, Np or Pu), in O{sub 2} and O{sub 2}/H{sub 2}O environments. We pay particular attention to the formation of oxygen clusters (co-operativity) in AnO{sub 2+x} and how this phenomenon govern oxidation thermodynamics and the development of ordered An{sub 4}O{sub 9} compounds. The so-called split di-interstitial, which is composed of two nearest neighbor octahedral oxygen interstitials that are distorted in such a way that they dislocate one regular fluorite lattice oxygen ion to form a cluster of triangular geometry, is predicted to be the fundamental building block of the most stable cluster configurations. We also identify how the formation of oxygen defect clusters and the degree of oxidation in AnO{sub 2+x} are both governed by the characer of the An-5f to excess O-2p charger transfer, i.e. the charge transfer to the O-2p orbitals of the interstitial-like (+x) ions, and the ability of the excess O-2p orbitals to hybridize with regular fluorite lattice ions.

36 MATERIALS SCIENCE↗

The Fission Barrier Landscape

Fission excitation functions have been measured for a chain of neighboring compound nuclei from {sup 207}Po to {sup 212}Po. We present a new analysis which provides a determination of the fission barriers and ground state shell effects with nearly spectroscopic accuracy. The accuracy achieved in this analysis may lead to a future detailed exploration of the saddle mass surface and its spectroscopy.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Tc-99 Decontamination From Heat Treated Gaseous Diffusion Membrane -Phase I

Uranium gaseous diffusion cascades represent a significant environmental challenge to dismantle, containerize and dispose as low-level radioactive waste. Baseline technologies rely on manual manipulations involving direct access to technetium-contaminated piping and materials. There is a potential to utilize novel thermal decontamination technologies to remove the technetium and allow for on-site disposal of the very large uranium converters. Technetium entered these gaseous diffusion cascades as a hexafluoride complex in the same fashion as uranium. Technetium, as the isotope Tc-99, is an impurity that follows uranium in the first cycle of the Plutonium and Uranium Extraction (PUREX) process. The technetium speciation or exact form in the gas diffusion cascades is not well defined. Several forms of Tc-99 compounds, mostly the fluorinated technetium compounds with varying degrees of volatility have been speculated by the scientific community to be present in these cascades. Therefore, there may be a possibility of using thermal desorption, which is independent of the technetium oxidation states, to perform an in situ removal of the technetium as a volatile species and trap the radionuclide on sorbent traps which could be disposed as low-level waste.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Chemical Differences Between Sludge Solids at the F and H Area Tank Farms

The primary source of waste solids received into the F Area Tank Farm (FTF) was from PUREX processing performed to recover uranium and plutonium from irradiated depleted uranium targets. In contrast, two primary sources of waste solids were received into the H Area Tank Farm (HTF): a) waste from PUREX processing; and b) waste from H-modified (HM) processing performed to recover uranium and neptunium from burned enriched uranium fuel. Due to the differences between the irradiated depleted uranium targets and the burned enriched uranium fuel, the average compositions of the F and H Area wastes are markedly different from one another. Both F and H Area wastes contain significant amounts of iron and aluminum compounds. However, because the iron content of PUREX waste is higher than that of HM waste, and the aluminum content of PUREX waste is lower than that of HM waste, the iron to aluminum ratios of typical FTF waste solids are appreciably higher than those of typical HTF waste solids. Other constituents present at significantly higher concentrations in the typical FTF waste solids include uranium, nickel, ruthenium, zinc, silver, cobalt and copper. In contrast, constituents present at significantly higher concentrations in the typical HTF waste solids include mercury, thorium, oxalate, and radionuclides U-233, U-234, U-235, U-236, Pu-238, Pu-242, Cm-244, and Cm-245. Because of the higher concentrations of Pu-238 in HTF, the long-term concentrations of Th-230 and Ra-226 (from Pu-238 decay) will also be higher in HTF. The uranium and plutonium distributions of the average FTF waste were found to be consistent with depleted uranium and weapons grade plutonium, respectively (U-235 comprised 0.3 wt% of the FTF uranium, and Pu-240 comprised 6 wt% of the FTF plutonium). In contrast, at HTF, U-235 comprised 5 wt% of the uranium, and Pu-240 comprised 17 wt% of the plutonium, consistent with enriched uranium and high burn-up plutonium. X-ray diffraction analyses of various FTF and HTF samples indicated that the primary crystalline compounds of iron in sludge solids are Fe 2 O 3 , Fe 3 O 4 , and FeO(OH), and the primary crystalline compounds of aluminum are Al(OH) 3 and AlO(OH). Also identified were carbonate compounds of calcium, magnesium, and sodium; a nitrated sodium aluminosilicate; and various uranium compounds. Consistent with expectations, oxalate compounds were identified in solids associated with oxalic acid cleaning operations. The most likely oxidation states and chemical forms of technetium are assessed in the context of solubility, since technetium-99 is a key risk driver from an environmental fate and transport perspective. The primary oxidation state of technetium in SRS sludge solids is expected to be Tc(IV). In salt waste, the primary oxidation state is expected to be Tc(VII). The primary form of technetium in sludge is expected to be a hydrated technetium dioxide, TcO 2 ⋅ xH 2 O, which is relatively insoluble and likely co-precipitated with iron. In salt waste solutions, the primary form of technetium is expected to be the very soluble pertechnetate anion, TcO 4 - . The relative differences between the F and H Tank Farm waste provide a basis for anticipating differences that will occur as constituents of FTF and HTF waste residue enter the environment over the long-term future. If a constituent is significantly more dominant in one of the Tank Farms, its long-term environmental contribution will likely be commensurately higher, assuming the environmental transport conditions of the two Tank Farms share some commonality. It is in this vein that the information cited in this document is provided - for use during the generation, assessment, and validation of Performance Assessment modeling results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Delocalization and occupancy effects of 5f orbitals in plutonium intermetallics using L3-edge resonant X-ray emission spectroscopy

Although actinide (An) L3 -edge X-ray absorption near-edge structure (XANES) spectroscopy has been very effective in determining An oxidation states in insulating, ionically bonded materials, such as in certain coordination compounds and mineral systems, the technique fails in systems featuring more delocalized 5f orbitals, especially in metals. Recently, actinide L3-edge resonant X-ray emission spec- troscopy (RXES) has been shown to be an effective alternative. This technique is further demonstrated here using a parameterized partial unoccupied density of states method to quantify both occupancy and delocalization of the 5f orbital in ?-Pu, ?-Pu, PuCoGa5 , PuCoIn5 , and PuSb2. These new results, supported by FEFF calculations, highlight the effects of strong correlations on RXES spectra and the technique?s ability to differentiate between f-orbital occupation and delocalization.

36 MATERIALS SCIENCE↗

Toward an Improved Understanding of Structure and Magnetism in Neptunium and Plutonium Phosphonates and Sulfonates

This grant supported the exploratory synthesis of new actinide materials with all of the actinides from thorium to californium with the exceptions of protactinium and berkelium. We developed detailed structure-property relationships that allowed for the identification of novel materials with selective ion-exchange, selective oxidation, and long-range magnetic ordering. We found novel bonding motifs and identified periodic trends across the actinide series. We identified structural building units that would lead to desired structural features and novel topologies. We also characterized many different spectroscopic trends across the actinide series. The grant support the preparation of approximately 1200 new compounds all of which were structurally characterized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of Fully Stoichiometric, Oxidation-State Pure Neptunium and Plutonium Dioxides from Molecular Precursors

Amidate-based ligands (N-(tert-butyl)isobutyramide, ITA) bind κ 2 to form homoleptic, 8-coordinate complexes with tetravalent 237 Np (Np(ITA) 4 , 1-Np) and 242 Pu (Pu(ITA) 4 , 1-Pu). These compounds complete an isostructural series from Th, U–Pu and allow for the direct comparison between many of the early actinides with stable tetravalent oxidation states by nuclear magnetic resonance (NMR) spectroscopy and single crystal X-ray diffraction (SCXRD). The molecular precursors are subjected to controlled thermolysis under mild conditions with the exclusion of exogenous air and moisture, facilitating the removal of the volatile organic ligands and ligand byproducts. The preformed metal–oxygen bond in the precursor, as well as the metal oxidation state, are maintained through the decomposition, forming fully stoichiometric, oxidation-state pure NpO 2 and PuO 2 . Powder X-ray diffraction (PXRD), scanning transmission electron microscopy (STEM), and energy dispersive X-ray spectroscopy (EDS) elemental mapping supported the evaluation of these high-purity materials. This chemistry is applicable to a wide range of metals, including actinides, with accessible tetravalent oxidation states, and provides a consistent route to analytical standards of importance to the field of nuclear nonproliferation, forensics, and fundamental studies.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Electron spectrum and heat capacity of heavy fermions in the canted phase of antiferromagnetic intermetallides

The energy spectrum of heavy fermions in an external magnetic field is calculated for canted magnetic sublattices of antiferromagnetic intermetallides. This makes it possible to determine low-temperature features of electronic heat capacity of heavy-fermion antiferromagnets with the metal-type ground state taking into account the structural rearrangement of the magnetic subsystem. The calculated temperature dependences of the magnetization, heat capacity, and Sommerfeld constant in the vicinity of the point of transition to the antiferromagnetic phase correlate with experimental data obtained for heavy-fermion antiferromagnets PuGa{sub 3}, Ce{sub 2}Au{sub 2}Cd, YbNiSi{sub 3}, and PuPd{sub 5}Al{sub 2}.

36 MATERIALS SCIENCE↗

Structure, phase transitions, and isotope effects in [(CH3)4N]2PuCl6

The single crystal X-ray diffraction structure of [(CH3)4N]2PuCl6 is presented for the first time, resolving long standing confusion and speculation regarding the structure of this compound in the literature. A temperature dependent study of this compound shows that the structure of [(CH3)4N]2PuCl6 undergoes no fewer than two phase transitions between 100 and 360 K. The phase of [(CH3)4N]2PuCl6 at room temperature is Fd-3c a = 26.012(3) Å. At 360 K, the structure is in space group Fm-3m with a = 13.088(1) Å. The plutonium octahedra and tetramethylammonium cations undergo a rotative displacement and the degree of rotation varies with temperature, giving rise to the phase transition from Fm-3m to Fd-3c as the crystal is cooled. Synthesis and structural studies of the deuterated salt [(CD3)4N]2PuCl6 suggest that there is an isotopic effect associated with this phase transition as revealed by a changing transition temperature in the deuterated versus protonated compound indicating that the donor-acceptor interactions between the tetramethylammonium cations and the hexachloroplutonate anions are driving the phase transformation.

crystallography↗

Plutonium Hybrid Materials: A Platform to Explore Assembly and Metal–Ligand Bonding

In this work, we report the synthesis of five new hybrid materials containing the [PuCl 6 ] 2- anion and charge balancing, non-covalent interaction donating 4-X-pyridinium (X = H, Cl, Br, I) cations. Single crystals of the title compounds were grown and harvested from acidic, chloride-rich, aqueous media and their structures were determined via X-ray diffraction. Compounds 1-4, (4XPyH) 2 [PuCl 6 ] and 5, (4IPyH) 4 [PuCl 6 ] · 2Cl, exhibit two distinct sheet-like structure types. Structurally relevant non-covalent interactions were tabulated from crystallographic data and verified computationally using electrostatic surface potential maps and the quantum theory of atoms in molecules (QTAIM) approach. The strength of the hydrogen and halogen bonds was quantified using Kohn-Sham density functional theory and a hierarchy of acceptor-donor pairings established. In turn, the PuIV-Cl bonds were studied using the QTAIM and natural localized molecular orbital (NLMO) approaches to delineate the underlying bond mechanism and hybrid atomic orbital contributions therein. Energy decomposition (ED) and natural ED analyses were also explored to probe the bond mechanism and, more broadly, explore the efficacy of these techniques in studying these anionic systems. The results of the PuIV-Cl bond analyses were compared across composition via analogous treatments of previously reported [PuO 2 Cl 4 ] 2- and [PuCl 3 (H 2 O) 5 ] molecular units. In summary, our study indicates that the Pu-Cl bonds are predominately ionic, yet exhibit small varying degrees of covalent character that increase from [PuCl 3 (H 2 O) 5 ], [PuO 2 Cl 4 ] 2- , to [PuCl 6 ] 2- , while the participation of the Pu based s/d and f orbitals concurrently decrease and increase, respectively.

transuranic↗

Reactions of Np(VI) and Pu(VI) with Phenanthroline Result in Bending the [NpVIO2]2+ Unit and a Reduced Pu(V) Species

Despite decades of actinyl chemistry, genuinely bent actinyl structures remain rare beyond uranium. We report the first crystallographic characterization of a bent neptunyl(VI) complex, NpO 2 Cl 2 (phen) 2, along with a linear plutonyl species that, unexpectedly, adopts the +V oxidation state. Coordination of two 1,10-phenanthroline ligands to NpO 2 2+ enforces pronounced bending of the O yl –Np–O yl unit to 162° through steric clashes with the axial phenathroline ligand, representing the sharpest angle reported for any neptunyl(VI) complex. In contrast, synthesis with PuO 2 2+ produces a reduced linear Pu(V) species, PuO 2 Cl(phen) 2, underscoring the redox lability and the reluctance of plutonium to distort. Raman and IR spectra yield the first experimental stretching and interaction force constants for plutonyl(V). Comparison with values for plutonyl(VI) and bent and linear uranyl(VI) and neptunyl(VI) compounds shows that reduction perturbs the actinyl bond more than bending within one oxidation state. Electrochemical and spectroscopic studies clarify phenanthroline binding to Pu(VI) and the system’s reactivity. Quantum chemical calculations indicate that bending is energetically favored in the U–Np–Pu series, but the stabilization energy decreases as the actinide atomic number increases. NBO and QTAIM analyses reveal systematic trends: increasing 5f occupancy and decreasing An–O yl bond covalency from U to Pu. These results demonstrate that ligand-induced bending in neptunyl(VI) species is not only electronically feasible but also synthetically achievable, though plutonyl(VI) is constrained by redox reactivity. This work expands the frontier of nonlinear actinyl chemistry and illuminates how structure, oxidation state, and electronic configuration interrelate across the actinyl series.

actinides↗

Production of new superheavy Z=108-114 nuclei with {sup 238}U, {sup 244}Pu, and {sup 248,250}Cm targets

Within the framework of the dinuclear system (DNS) model, production cross sections of new superheavy nuclei with charged numbers Z=108-114 are analyzed systematically. Possible combinations based on the actinide nuclides {sup 238}U, {sup 244}Pu, and {sup 248,250}Cm with the optimal excitation energies and evaporation channels are pointed out to synthesize new isotopes that lie between the nuclides produced in the cold fusion reactions and the {sup 48}Ca-induced fusion reactions experimentally, which are feasible to be constructed experimentally. It is found that the production cross sections of superheavy nuclei decrease drastically with the charged numbers of compound nuclei. Larger mass asymmetries of the entrance channels enhance the cross sections in 2n-5n channels.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗