Search NASA⌕ Search

SEARCH · Search NASA

Results for “POINT IMPACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Impact of magnetic isolation on pointing system performance in the presence of structural flexibility

The inertial pointing stability of a gimbal pointing system (AGS) was compared with a magnetic pointing/gimbal followup system (ASPS), under certain conditions of system structural flexibility and disturbance inputs from the gimbal support structure. Separate 3 degree-of-freedom (3DOF) linear models based on NASTRAN modal flexibility data for the gimbal and support structures were generated for the ASPS configurations. Using the models inertial pointing control loops providing 6dB of gain margin and 45 deg of phase margin were defined for each configuration. The pointing loop bandwidth obtained for the ASPS is more than twice the level achieved for the AGS configuration. The AGS limit is attributed to the gimbal and support structure flexibility. As a result of the higher ASPS pointing loop bandwidth and the disturbance rejection provided by the magnetic isolation ASPS pointing performane is significantly better than that of the AGS system. The low frequency peak of the ASPS transfer function from base disturbance to payload angular motion is almost 60dB lower than AGS low frequency peak.

Seller, J.↗
NASA NTRS1986

Fracture mechanics; Proceedings of the Seventeenth National Symposium, Albany, NY, August 7-9, 1984

The present conference gives attention to topics in the application of fracture mechanics, subcritical crack growth phenomena, fracture testing methods, ductile fracture behavior, and fracture mechanisms and their analysis. Specific papers treat the resistance curve approach to composite materials characterization, fracture toughness in ductile iron and cast steel, hold-time effects in elevated temperature fatigue crack propagation, creep crack growth under nonsteady conditions, viscoplastic fatigue in a superalloy at elevated temperatures, fracture testing with arc bend specimens, one-point bend impact test application, and a compact mode II fracture specimen. Also discussed are the computation of stable crack growth using the J-integral, the use of plastic energy dissipation to characterize crack growth, the extension of surface cracks under cyclic loading, the minimum time criterion for crack instability in structural materials, dynamic crack propagation and branching under biaxial loading, and boundary layer effects in cracked bodies.

Underwood, J. M.↗
NASA NTRS1986

Calculation of secondary electron trajectories in multistage depressed collectors for microwave amplifiers

Computational procedures are reported for treating power losses due to secondary electrons in multistage depressed collectors (MDC) for traveling wave tubes (TWT) and other O-type electron tubes. The MDC is modeled with an advanced, multidimensional computer program. Representative beams of secondary electrons are then injected at the points of impact of the primary beams. Separate programs are used to calculate representative beams of high-energy primary electron beams and of low-energy true secondaries. The recomputation of the MDC model including the true secondary beam allows determination of the secondary emission losses, and, if necessary, redesign of the MDC to improve performance. Recomputation of the MDC model including the primary beams is used to check on possible backstreaming from the MDC to the RF interaction structure of the tube. A comparison with experimentally measured values of TWT and MDC efficiencies is made.

Force, Dale A.↗
NASA NTRS1988

Simulation and measurement of disturbance propagation in a single tether system

One of the missions of the Getaway Tether Experiment (GATE) is to investigate disturbance propagation and control in a tethered system. In order to understand the nature of the propagation, simulation of the tether response is vital. A single finite duration pulse is the source of the disturbance. A bead model is used to predict the motion of the tether and the end masses (modeled as point masses). System response is checked for different magnitudes of force and for different points of impact on the tether. Along with simulation, hardware development is needed, especially in the area of tension measurement. At this time, hardware is being developed to measure the tension in the tether, so that the tethered system can be controlled via tension feedback. The hardware will then be tested in conjunction with the Dynamics and Control Mission of the GATE project.

Greene, Michael↗
NASA NTRS1988

ART/Ada design project, phase 1. Task 2 report: Detailed design

Various issues are studied in the context of the design of an Ada based expert system building tool. Using an existing successful design as a starting point, the impact is analyzed of the Ada language and Ada development methodologies on that design, the Ada system is redesigned, and its performance is analyzed using both complexity-theoretic and empirical techniques. The algorithms specified in the overall design are refined, resolving and documenting any open design issues, identifying each system module, documenting the internal architecture and control logic, and describing the primary data structures involved in the module.

Allen, Bradley P.↗
NASA NTRS1996

Features Of Cavity Flow And Acoustics Of Stratospheric Observatory For Infrared Astronomy

The stratospheric observatory for infrared astronomy (SOFIA) is a 2.5 meter aperture Cassegrain telescope with a Nasmyth focus that will be housed in an open cavity in the Boeing 747-SP aircraft and operated at altitudes around 41,000 feet for infrared (IR) viewing of celestial events of astronomical nature. At these altitudes the IR viewing capability of SOFIA far exceeds that of any ground based system. To minimize IR transmission losses, SOFIA will operate with an open cavity. Such an open cavity during flight creates several challenging aerodynamic and aeroacoustic design problems. Foremost of these are: the shear layer over the cavity may cause unwanted resonance if the cavity is untreated; this might give rise to excessive sound pressure levels (SPL) in the cavity and thus affect the unsteady loads on the telescope; the unsteady flow within the cavity produces large dynamic loads and moments that will impact the pointing accuracy of the telescope; the open cavity and the shear layer control devices produce additional drag that will affect directly the time of flight of the mission; the aft location of the cavity down stream of port wing will affect the the flow on the aircraft control surfaces and thus the stability of the aircraft. Also, the highly turbulent shear layer over the cavity and the temperature gradients and 'hot spots' within the cavity can produce a wave front error of the image when it reaches the focal plane of the recorder.

Srinivasan, G. R.↗
NASA NTRS1995

Video Golf

George Nauck of ENCORE!!! invented and markets the Advanced Range Performance (ARPM) Video Golf System for measuring the result of a golf swing. After Nauck requested their assistance, Marshall Space Flight Center scientists suggested video and image processing/computing technology, and provided leads on commercial companies that dealt with the pertinent technologies. Nauck contracted with Applied Research Inc. to develop a prototype. The system employs an elevated camera, which sits behind the tee and follows the flight of the ball down range, catching the point of impact and subsequent roll. Instant replay of the video on a PC monitor at the tee allows measurement of the carry and roll. The unit measures distance and deviation from the target line, as well as distance from the target when one is selected. The information serves as an immediate basis for making adjustments or as a record of skill level progress for golfers.

Source record↗
NASA NTRS2012

Sporadic Groundwater Upwelling in Deep Martian Craters: Evidence for Lacustrine Clays and Carbonates

While the surface of Mars may have had an active hydrosphere early in its history [1], it is likely that this water retreated to the subsurface early on due to loss of the magnetic field and early atmosphere [2]. This likely resulted in the formation of two distinct aqueous regimes for Mars from the Late Noachian onward: one dominated by redistribution of surface ice and occasional melting of snow/ice [3], and one dominated by groundwater activity [4]. The excavation of alteration minerals from deep in the crust by impact craters points to an active, ancient, deep hydrothermal system [5]. Putative sapping features [6] may occur where the groundwater breached the surface. Upwelling groundwater may also have played a critical role in the formation of massive, layered, cemented sediments in Sinus Meridiani [7,8], in the Valles Marineris [9], and possibly in Gale Crater [10], where the Curiosity Rover will land later this year. Understanding the past distribution, geochemistry, and significance of groundwater on Mars is critical to untangling the origins of deep alteration minerals, Hesperian sulfate deposits, and crater fill deposits at Gale Crater or in other locations.

Michalski, J. R.↗
NASA NTRS2012

Single-Layer, All-Metal Patch Antenna Element with Wide Bandwidth

It is known that the impedance at the center of a patch antenna element is a short circuit, implying that a wire or post can be connected from the patch to the groundplane at this point without impacting radiation performance. In principle, this central post can be used to support the patch element, thus eliminating the need for dielectric. In spaceborne applications, this approach is problematic because a patch element supported by a single, thin post is highly susceptible to acoustic loads during launch. The technology reported here uses a large-diameter center post as its supporting structure. The supporting structure allows for the fabrication of a sufficiently rigid antenna element that can survive launch loads. The post may be either hollow or solid, depending on fabrication approach and/or mass constraints. The patch antenna element and support post are envisioned as being fabricated (milled) from a single piece of aluminum or other metal. Alternately, the patch plate and support column can be fabricated separately and then joined using fasteners, adhesive, or welding. Casting and electroforming are also viable techniques for manufacturing the metal patch part(s). The patch structure is then either bonded or fastened to the supporting groundplane. Arrays of patch elements can be fabricated by attaching several structures to a common groundplane/support structure.

Chamberlain, Neil F.↗
NASA NTRS2013

Weight Assessment for Fuselage Shielding on Aircraft With Open-Rotor Engines and Composite Blade Loss

The Federal Aviation Administration (FAA) has been engaged in discussions with airframe and engine manufacturers concerning regulations that would apply to new technology fuel efficient "openrotor" engines. Existing regulations for the engines and airframe did not envision features of these engines that include eliminating the fan blade containment systems and including two rows of counter-rotating blades. Damage to the airframe from a failed blade could potentially be catastrophic. Therefore the feasibility of using aircraft fuselage shielding was investigated. In order to establish the feasibility of this shielding, a study was conducted to provide an estimate for the fuselage shielding weight required to provide protection from an open-rotor blade loss. This estimate was generated using a two-step procedure. First, a trajectory analysis was performed to determine the blade orientation and velocity at the point of impact with the fuselage. The trajectory analysis also showed that a blade dispersion angle of 3deg bounded the probable dispersion pattern and so was used for the weight estimate. Next, a finite element impact analysis was performed to determine the required shielding thickness to prevent fuselage penetration. The impact analysis was conducted using an FAA-provided composite blade geometry. The fuselage geometry was based on a medium-sized passenger composite airframe. In the analysis, both the blade and fuselage were assumed to be constructed from a T700S/PR520 triaxially-braided composite architecture. Sufficient test data on T700S/PR520 is available to enable reliable analysis, and also demonstrate its good impact resistance properties. This system was also used in modeling the surrogate blade. The estimated additional weight required for fuselage shielding for a wing- mounted counterrotating open-rotor blade is 236 lb per aircraft. This estimate is based on the shielding material serving the dual use of shielding and fuselage structure. If the shielding material is not used for dual purpose, and is only used for shielding, then the additional weight per aircraft is estimated to be 428 lb. This weight estimate is based upon a number of assumptions that would need to be revised when applying this concept to an actual airplane design. For example, the weight savings that will result when there is no fan blade containment system, manufacturing limitations which may increase the weight where variable thicknesses was assumed, engine placement on the wing versus aft fuselage, etc.

aircraft safety↗
NASA NTRS2016

Solid State Inflation Balloon Active Deorbiter: Scalable Low-Cost Deorbit System for Small Satellites

The goal of the Solid State Inflation Balloon Active Deorbiter project is to develop and demonstrate a scalable, simple, reliable, and low-cost active deorbiting system capable of controlling the downrange point of impact for the full-range of small satellites from 1 kg to 180 kg. The key enabling technology being developed is the Solid State Gas Generator (SSGG) chip, generating pure nitrogen gas from sodium azide (NaN3) micro-crystals. Coupled with a metalized nonelastic drag balloon, the complete Solid State Inflation Balloon (SSIB) system is capable of repeated inflation/deflation cycles. The SSGG minimizes size, weight, electrical power, and cost when compared to the current state of the art.

Drag balloon↗
NASA NTRS2018

Hydrodynamic Modeling of Solar Acoustic Wave Propagation

Acoustic waves in the sun are separated into two categories: global and local. Global oscillations are excited through convection, and resonate in the solar interior. As with all resonant media, propagation of these acoustic waves is limited to specific frequencies for a given wavenumber. These modes are easily distinguished in 1-v diagrams, such as in figure 1. Global modes dominate the spectrum in the 2-5 mHz range. Local oscillations, so-called "sunquakes", are usually excited by particularly strong flares and can be observed as ring-shaped waves propagating away from the point of impact. The propagation is best displayed in a time-distance diagram, where a slit passing from the source to some distance away. Distance is displayed on the x-axis, and the time-series is plotted along the y-axis; an example is shown in figure 1, showing the sunquake induced by the Sept 2017 X-class flare.

Hydrodynamic↗
NASA NTRS1993

Corvid meteoroids are not ejecta from the Giordano Bruno impact

The study points out three difficulties with the hypothesis of Hartung (1993) that the Corvid meteor system, observed only once in 1937, may be the return of the clump of ejecta from the formation of a lunar crater, specifically, an event recorded in the chronicles of Gervase of Canterbury on June 25, 1178, which Hartung (1976) previously suggested may be an eyewitness account of the formation of the lunar crater Giordano Bruno. On the basis of this, he predicts that another Corvid shower may be observed in 2003 or 2006. This hypothesis is rejected on the contention that it is implausible that a clump of ejecta could be launched into heliocentric orbit with a low enough dispersion in velocity among separate pieces that it would produce a meteor shower in just one year and not others. Subsequent perturbations by the earth on parts of the clump passing near the earth but not impacting would destroy the coherence of the clump on a time scale much shorter than the 759-yr interval proposed. There are so many orbits that could yield a shower after 759 yr that it is unlikely that a prediction of a return in a specific year would be correct.

Harris, A. W.↗
NASA NTRS1991

Design and development of a leak tight helium II valve with low thermal impact

The Lambda Point Experiment is a precision measurement of the specific heat of liquid helium near the lambda point phase transition, in the low gravity of the space shuttle. It requires a valve for the helium sample chamber that operates at helium II temperature, has minimal thermal disturbance to the rest of the instrument, and is leak tight to helium II. A valve meeting these and all of the other science and engineering requirements of the mission has been developed by Ball. Initially, both torque and pressure actuated valve concepts were considered; the final flight design is pressure actuated. The rational for this decision as well as the rest of the valve design are given. The paper also discusses the manufacturing and testing of the prototype and flight valves. Test data is presented and discussed.

Mills, G. L.↗
NASA NTRS1987

Impact of space station appendage vibrations on the pointing performance of gimballed payloads

A study of the interface problems between the Space Station Structure (vibrations) and the Payload Pointing Control System was undertaken. A major goal of the study was to identify any bounding factors that might limit the achievement of required pointing accuracies. A major result is that the space station will have a disturbance-rich environment and the background levels will be large enough to impact the pointing of some of the payloads. The need for an interface vibration specification between the structure and the payloads was identified.

Hughes, Robert O.↗
NASA NTRS2006

Quasi-Static 3-Point Reinforced Carbon-Carbon Bend Test and Analysis for Shuttle Orbiter Wing Leading Edge Impact Damage Thresholds

Static 3-point bend tests of Reinforced Carbon-Carbon (RCC) were conducted to failure to provide data for additional validation of an LS-DYNA RCC model suitable for predicting the threshold of impact damage to shuttle orbiter wing leading edges. LS-DYNA predictions correlated well with the average RCC failure load, and were good in matching the load vs. deflection. However, correlating the detectable damage using NDE methods with the cumulative damage parameter in LS-DYNA material model 58 was not readily achievable. The difficulty of finding internal RCC damage with NDE and the high sensitivity of the mat58 damage parameter to the load near failure made the task very challenging. In addition, damage mechanisms for RCC due to dynamic impact of debris such as foam and ice and damage mechanisms due to a static loading were, as expected, not equivalent.

Fasanella, Edwin L.↗
NASA NTRS1988

The Mariner Mark II high precision scan actuator - Results of an options trade study covering pointing performance and system-wide impacts

Four actuators considered as candidates to meet the requirements of the Mariner Mark II high-precision scan platform are evaluated with respect to such criteria as the net effect on spacecraft mass, required power, cost, expected pointing performance, operational considerations, and necessary control complexity. A direct drive actuator is found to be the most suitable candidate. It is noted that for missions where reactionless actuation results in a lower spacecraft mass due to propellant savings, the option of using a platform mounted or spacecraft mounted reaction wheel for platform momentum compensation and spacecraft attitude control is attractive.

Schier, J. Alan↗
NASA NTRS1973

Simultaneous impact and lunar craters.

The existence of large terrestrial impact crater doublets and Martian crater doublets that have been inferred to be impact craters demonstrates that simultaneous impact of two or more bodies occurs at nearly the same point on planetary surfaces. An experimental study of simultaneous impact of two projectiles near one another shows that doublet craters with ridges perpendicular to the bilateral axis of symmetry result when separation between impact points relative to individual crater diameter is large. When separation is progressively less, elliptical craters with central ridges and central peaks, circular craters with flat floors containing ridges and peaks, and circular craters with deep round bottoms are produced. These craters are similar in structure to many of the large lunar craters.

Oberbeck, V. R.↗