Search NASA⌕ Search

SEARCH · Search NASA

Results for “PROPERTY RIGHTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Correlation of optical properties and temperature-induced irreversible phase transitions in europium-doped yttrium carbonate nanoparticles

Nanophase europium-doped yttrium carbonate precursors are subjected to heat treatments, ranging from 300 Degree-Sign C to 1100 Degree-Sign C for dwell times of 5 min, 30 min, and 180 min. XRD, TEM, FT-IR, fluorescence, fluorescence excitation, and fluorescence lifetime measurements are used to characterize the materials. Upon heating, the material transitions through several amorphous stages until it reaches the crystalline cubic Y{sub 2}O{sub 3} phase. DSC measurements show an exothermic transition at 665.7 Degree-Sign C, indicating the formation of crystalline Y{sub 2}O{sub 3}. The grain size development is fitted by the relaxation equation and yields an activation energy of 50.3 kJ/mol. The amorphous phases are characterized by inhomogenously broadened optical spectra. Heating up to 700 Degree-Sign C leads to an increased fluorescence lifetime (from about 1 ms to 2.4 ms). As the material is heated to higher temperatures and completes the formation of the crystalline cubic Y{sub 2}O{sub 3} phase, the optical spectra become narrower and the fluorescence lifetime decreases to about 1.2 ms. - Graphical abstract: Fluorescence lifetimes of Eu-doped Y{sub 2}O{sub 3} precursors heated for 5, 30, and 180 min to various temperatures. Highlights: Black-Right-Pointing-Pointer Irreversible phase transitions in nanoparticles are of interest for thermometry. Black-Right-Pointing-Pointer Eu-doped nanophase yttrium carbonate precursors were heat-treated. Black-Right-Pointing-Pointer The material undergoes decomposition and crystallization. Black-Right-Pointing-Pointer Morphological and optical properties are measured. Black-Right-Pointing-Pointer Optical properties can be used to deduce the temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural, energetic and thermodynamic analyses of Ca(BH{sub 4}){sub 2}{center_dot}2NH{sub 3} from first principles calculations

Ca(BH{sub 4}){sub 2}{center_dot}2NH{sub 3} is a relatively new compound with potential application in hydrogen storage. Here the fundamental properties of the compound, such as electronic structure, energetic and thermodynamic properties, were comprehensively studied using first-principles calculations. Results from electronic density of states (DOS) and electron localization function (ELF) indicate the covalent bond nature of the N-H bond and the B-H bond. Charge density analyses show weak ionic interactions between the Ca atom and the NH{sub 3} complexes or the (BH{sub 4}){sup -} complexes. The calculated vibration frequencies of B-H and N-H are in good agreement with other theoretical and experimental results. Furthermore, we calculated the reaction enthalpy and reaction Gibbs free energy at a range of temperature 0-700 K. Our results are in good agreement with experimental results in literature. Possible reaction mechanism of the decomposition reaction is proposed. - Graphical Abstract: The crystal structure of this compound and the calculated decomposition reaction free energy for two different reactions: Reac(2):Ca(BH{sub 4}){sub 2} Dot-Operator 2NH{sub 3} Long-Rightwards-Arrow {sup 162 Degree-Sign C}Ca(BH{sub 4}){sub 2} Dot-Operator NH{sub 3}+NH{sub 3} Long-Rightwards-Arrow {sup 230 Degree-Sign C}Ca(BH{sub 4}){sub 2}+2NH{sub 3} Reac(3):Ca(BH{sub 4}){sub 2} Dot-Operator 2NH{sub 3} Long-Rightwards-Arrow {sup 190 Degree-Sign C}1/4Ca(BH{sub 4}){sub 2}+1/4Ca{sub 3}(BN{sub 2}){sub 2}+BN+6H{sub 2}. Highlights: Black-Right-Pointing-Pointer Crystal structure of this compound was studied in detail. Black-Right-Pointing-Pointer Electronic properties were calculated for the first time. Black-Right-Pointing-Pointer Phonon density of states and reaction free energy at different temperatures were first calculated. Black-Right-Pointing-Pointer Possible decomposition mechanism was presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Properties of short-wavelength oblique Alfvén and slow waves

Linear properties of kinetic Alfvén waves (KAWs) and kinetic slow waves (KSWs) are studied in the framework of two-fluid magnetohydrodynamics. We obtain the wave dispersion relations that are valid in a wide range of the wave frequency ω and plasma-to-magnetic pressure ratio β. The KAW frequency can reach and exceed the ion-cyclotron frequency at ion kinetic scales, whereas the KSW frequency remains sub-cyclotron. At β ∼ 1, the plasma and magnetic pressure perturbations of both modes are in anti-phase, so that there is nearly no total pressure perturbations. However, these modes also exhibit several opposite properties. At high β, the electric polarization ratios of KAWs and KSWs are opposite at the ion gyroradius scale, where KAWs are polarized in the sense of electron gyration (right-hand polarized) and KSWs are left-hand polarized. The magnetic helicity σ ∼ 1 for KAWs and σ ∼ –1 for KSWs, and the ion Alfvén ratio R{sub Ai} << 1 for KAWs and R{sub Ai} >> 1 for KSWs. We also found transition wavenumbers where KAWs change their polarization from left-handed to right-handed. These new properties can be used to discriminate KAWs and KSWs when interpreting kinetic-scale electromagnetic fluctuations observed in various solar-terrestrial plasmas. This concerns, in particular, identification of modes responsible for kinetic-scale pressure-balanced fluctuations and turbulence in the solar wind.

79 ASTRONOMY AND ASTROPHYSICS↗

Effects of competing magnetic interactions on the electronic transport properties of CuCrSe{sub 2}

We have synthesized single-phase samples of the CuCrSe{sub 2} phase that exhibits hexagonal-rhombohedral layered crystal structure with space group R3m. Here we present a detailed study of electronic transport and magnetic properties of CuCrSe{sub 2}. We moreover investigate the heat capacity of CuCrSe{sub 2} in comparison to that of CuCrS{sub 2}. The electrical resistivity of CuCrSe{sub 2} shows metallic-like behavior down to 2 K, while the thermoelectric power is large around 100 {mu}V K{sup -1} at 300 K. A weak anomaly in resistivity and a rounded maximum in magnetic susceptibility are observed around 55 K. No sharp transition at 55 K is observed in the heat capacity of CuCrSe{sub 2}, rather a visible maximum is seen. At low temperatures from 2 to 14 K, the magnetic heat capacity follows T{sup 2}-dependence. We tentatively believe this behavior of CuCrSe{sub 2} to be due to competing magnetic interactions between intralayer Cr atoms. The ferromagnetic Cr-Se-Cr indirect exchange among intralayer Cr atoms is enhanced in the selenide compound (that is more metallic than the sulfide compound), and competes with the antiferromagnetic Cr-Cr direct interactions. The interlayer antiferromagnetic exchange through Cu atoms leads to magnetic ordering at low temperature at T{sub N}=55 K. - Graphical abstract: Comparison of magnetic properties of CuCrSe{sub 2} and CuCrS{sub 2} indicates a sharp cusp-like anomaly in magnetic susceptibility at the antiferromagnetic transition of CuCrS{sub 2} while the maximum of CuCrSe{sub 2} is well rounded. Magnetization is reversible after field-cooling (FC) and zero-field-cooling (ZFC) for both compounds. Highlights: Black-Right-Pointing-Pointer Layered CuCrSe{sub 2} can be synthesized in both fully and partially cation-ordered forms. Black-Right-Pointing-Pointer Contrary to previously believed insulating nature the cation-ordered phase is metallic. Black-Right-Pointing-Pointer Magnetic property of CuCrSe{sub 2} is somewhat different from that of CuCrS{sub 2}. Black-Right-Pointing-Pointer Magnetization and heat capacity data suggest complex short-range ordering for CuCrSe{sub 2}.

36 MATERIALS SCIENCE↗

Anisotropic thermal properties of the polar crystal Cs{sub 2}TeMo{sub 3}O{sub 12}

A Cs{sub 2}TeMo{sub 3}O{sub 12} single crystal with dimensions of 17 mm Multiplication-Sign 17 mm Multiplication-Sign 18 mm was grown using the top-seeded solution growth method. Thermal properties, including thermal expansion, specific heat, thermal diffusivity and thermal conductivity, were investigated as a function of temperature. The average linear thermal expansion coefficients along different crystallographic directions were measured to be {alpha}{sub a}=7.34 Multiplication-Sign 10{sup -6} K{sup -1} and {alpha}{sub c}=32.02 Multiplication-Sign 10{sup -6} K{sup -1} over the temperature range of 30-430 Degree-Sign C. The specific heat was measured to be 0.400-0.506 J g{sup -1} K{sup -1} from 22 Degree-Sign C to 440 Degree-Sign C. The thermal conductivity was calculated to be 1.86 and 0.76 W m{sup -1} K{sup -1} at 22 Degree-Sign C along the a and c axes, respectively. With increasing temperature from 22 to 430 Degree-Sign C, the thermal conductivity decreases by 33.0% along the a axis, while it decreases by 18.5% below 200 Degree-Sign C and then remains unchanged along the c axis. The relationship between structure and the thermal properties is also discussed. - Graphical Abstract: Centimeter-sized crystals of polar Cs{sub 2}TeMo{sub 3}O{sub 12} were grown using the top-seeded solution growth method. The relative large anisotropy in thermal expansion and thermal conductivity of Cs{sub 2}TeMo{sub 3}O{sub 12} is attributable to its layered structure. Highlights: Black-Right-Pointing-Pointer Cs{sub 2}TeMo{sub 3}O{sub 12} single crystals with dimensions of 17 Multiplication-Sign 17 Multiplication-Sign 18 mm{sup 3} were grown. Black-Right-Pointing-Pointer Thermal properties of Cs{sub 2}TeMo{sub 3}O{sub 12} were studied as a function of temperature. Black-Right-Pointing-Pointer The thermal expansion anisotropy of Cs{sub 2}TeMo{sub 3}O{sub 12} is explained using its structure. Black-Right-Pointing-Pointer To protect Cs{sub 2}TeMo{sub 3}O{sub 12} crystal, a small cooling rate should be used during growth. Black-Right-Pointing-Pointer A large temperature gradient should be avoided during processing and application.

36 MATERIALS SCIENCE↗

Causal signal transmission by quantum fields. V: Generalised Keldysh rotations and electromagnetic response of the Dirac sea

The connection between real-time quantum field theory (RTQFT) [see, e.g., A. Kamenev and A. Levchenko, Adv. Phys. 58 (2009) 197] and phase-space techniques [E. Wolf and L. Mandel, Optical Coherence and Quantum Optics (Cambridge, 1995)] is investigated. The Keldysh rotation that forms the basis of RTQFT is shown to be a phase-space mapping of the quantum system based on the symmetric (Weyl) ordering. Following this observation, we define generalised Keldysh rotations based on the class of operator orderings introduced by Cahill and Glauber [K.E. Cahill, R.J. Glauber, Phys. Rev. 177 (1969) 1882]. Each rotation is a phase-space mapping, generalising the corresponding ordering from free to interacting fields. In particular, response transformation [L.I. Plimak, S. Stenholm, Ann. Phys. (N.Y.) 323 (2008) 1989] extends the normal ordering of free-field operators to the time-normal ordering of Heisenberg operators. Structural properties of the response transformation, such as its association with the nonlinear quantum response problem and the related causality properties, hold for all generalised Keldysh rotations. Furthermore, we argue that response transformation is especially suited for RTQFT formulation of spatial, in particular, relativistic, problems, because it extends cancellation of zero-point fluctuations, characteristic of the normal ordering, to interacting fields. As an example, we consider quantised electromagnetic field in the Dirac sea. In the time-normally-ordered representation, dynamics of the field looks essentially classical (fields radiated by currents), without any contribution from zero-point fluctuations. For comparison, we calculate zero-point fluctuations of the interacting electromagnetic field under orderings other than time-normal. The resulting expression is physically inconsistent: it does not obey the Lorentz condition, nor Maxwell's equations. - Highlights: Black-Right-Pointing-Pointer The Keldysh rotation is a phase-space mapping based on Weyl's operator ordering. Black-Right-Pointing-Pointer Generalised Keldysh rotations (GKRs) based on other orderings are introduced. Black-Right-Pointing-Pointer Special properties of the GKR based on the normal ordering are elucidated. Black-Right-Pointing-Pointer In relativistic QED, other rotations are shown to be physically inconsistent.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Electronic structure and magnetic properties of FeWO{sub 4} nanocrystals synthesized by the microwave-hydrothermal method

This communication reports that FeWO{sub 4} nanocrystals were successfully synthesized by the microwave-hydrothermal method at 443 K for 1 h. The structure and shape of these nanocrystals were characterized by X-ray diffraction, Rietveld refinement, and transmission electron microscopy. The experimental results and first principles calculations were combined to explain the electronic structure and magnetic properties. Experimental data were obtained by magnetization measurements for different applied magnetic fields. Theoretical calculations revealed that magnetic properties of FeWO{sub 4} nanocrystals can be assigned to two magnetic orderings with parallel or antiparallel spins in adjacent chains. These factors are crucial to understanding of competition between ferro- and antiferromagnetic behavior. Highlights: Black-Right-Pointing-Pointer Monophasic FeWO{sub 4} nanocrystals were synthesized by the microwave-hydrothermal method. Black-Right-Pointing-Pointer Rietveld refinement and clusters model for monoclinic structure Black-Right-Pointing-Pointer Magnetic properties of FeWO{sub 4} nanocrystals at different temperatures.

36 MATERIALS SCIENCE↗

X-57 “Maxwell” High-Lift Propeller Testing and Model Development

NASA’s X-57 “Maxwell” distributed electric propulsion flight demonstrator has a high-lift system that includes 12 fixed-pitch high-lift propellers located upstream of the wing leading edge for lift augmentation at low speeds. These high-lift propellers are not required at higher speeds and are folded conformally along the nacelles to reduce drag when not in operation. Aircraft performance models and flight simulations incorporate propeller performance to predict thrust, moments, and power consumption and propeller model accuracy is important in identifying safe operating regimes for this aircraft. Current high-lift propeller performance models have been verified and calibrated against numerous computational fluid dynamics analyses under a variety of flight conditions. We performed a series of full-scale wind tunnel tests at the NASA Langley Research Center Low Speed Aeroacoustic Wind Tunnel to further validate these models, to identify any adverse operating conditions for these propellers, and to assess the accuracy of the facility’s new Propeller Test Stand. The results indicate that the models accurately predicted performance and that the right-handed propeller showed lower torque and thrust for a given propeller speed compared to the left-handed version. Acoustic data support these measurements, showing higher tonal noise for the left versus right propeller. We suspect this is due to slight differences in the material properties between the early production (right) and more recent (left) blade sets leading to greater detwisting in the right-handed blades under load. Both propellers demonstrated very stable operation throughout the test including during deployment, stowing, and windmilling. Furthermore, high-speed imagery of the spinning propeller indicated no blade oscillations or instabilities for any test case. We also leveraged these images to analyze the effects of propeller loading on blade detwisting and tip position. Unfortunately, the thrust measurements varied significantly during the test due to cross-loading of the Propeller Test Stand load cell, though trends in the thrust data were still observable. The torque measurement, however, remained very precise for all test points and was used for performance comparisons. As a result of this test, we validated and improved the X-57 high-lift propeller performance models, obtained detailed propeller acoustic data and high-speed imagery, observed the propeller operating safely during a variety of dynamic events, and identified two potentially adverse, low-propeller-speed conditions which will be avoided during normal aircraft operation.

X-57↗

Substitutions into the trigonal bipyramidal site of InGaCuO{sub 4}

Solid solutions of InMCu{sub 1-x}Mg{sub x}O{sub 4} (M=Ga{sup 3+}, Al{sup 3+}) have been synthesized to understand the influence of the trigonal bipyramidal (TBP) crystallographic M{sup 3+}/Cu{sup 2+} site of the YbFe{sub 2}O{sub 4}-type structure through powder X-ray and neutron diffraction, dielectric and magnetism measurements. The addition of Mg{sup 2+} in the InGaCuO{sub 4} lattice results in a decrease of the dielectric constant, but the dielectric loss is not affected until the concentration of Mg{sup 2+} is above x=0.50. The shift in the diffraction peaks, and subsequently the change in the lattice parameters, cannot be exclusively explained by the change in ionic radii. These results show the first observation of the reduction in axial bond lengths for TBP Cu{sup 2+} in a YbFe{sub 2}O{sub 4}-type crystal lattice. - Graphical abstract: Solid solutions of InMCu{sub 1-x}Mg{sub x}O{sub 4} (M=Ga{sup 3+}, Al{sup 3+}) have been synthesized and analyzed with powder X-ray and neutron diffraction, dielectric and magnetism measurements. A shift in the lattice parameters that cannot be explained by the change in ionic radii is addressed through a study of the trigonal bipyramidal site. Highlights: Black-Right-Pointing-Pointer Solid solutions of InMCu{sub 1-x}Mg{sub x}O{sub 4} (M=Ga{sup 3+}, Al{sup 3+}) have been synthesized. Black-Right-Pointing-Pointer The observed dielectric properties decreased with the dilution of Cu{sup 2+}. Black-Right-Pointing-Pointer Antiferromagnetic interactions, without ordering, were observed in InGaCu{sub 1-x}Mg{sub x}O{sub 4}. Black-Right-Pointing-Pointer A reduction in the axial TBP bond lengths produced a large change in the c/a ratio. Black-Right-Pointing-Pointer Orbital overlap across the TBP layers greatly affected the observed properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Antimicrobial properties of analgesic kyotorphin peptides unraveled through atomic force microscopy

Highlights: Black-Right-Pointing-Pointer New kyotorphin derivatives have antimicrobial properties against S. aureus. Black-Right-Pointing-Pointer Atomic force microscopy show membrane disturbing effects of KTP-NH{sub 2} and IbKTP-NH{sub 2}. Black-Right-Pointing-Pointer None of the KTP derivatives are hemolytic. Black-Right-Pointing-Pointer The minimal peptidic sequence with antimicrobial activity is Tyr-Arg, if amidated. -- Abstract: Antimicrobial peptides (AMPs) are promising candidates as alternatives to conventional antibiotics for the treatment of resistant pathogens. In the last decades, new AMPs have been found from the cleavage of intact proteins with no antibacterial activity themselves. Bovine hemoglobin hydrolysis, for instance, results in AMPs and the minimal antimicrobial peptide sequence was defined as Tyr-Arg plus a positively charged amino acid residue. The Tyr-Arg dipeptide alone, known as kyotorphin (KTP), is an endogenous analgesic neuropeptide but has no antimicrobial activity itself. In previous studies new KTP derivatives combining C-terminal amidation and Ibuprofen (Ib) - KTP-NH{sub 2}, IbKTP, IbKTP-NH{sub 2} - were designed in order to improve KTP brain targeting. Those modifications succeeded in enhancing peptide-cell membrane affinity towards fluid anionic lipids and higher analgesic activity after systemic injection resulted therefrom. Here, we investigated if this affinity for anionic lipid membranes also translates into antimicrobial activity because bacteria have anionic membranes. Atomic force microscopy revealed that KTP derivatives perturbed Staphylococcus aureus membrane structure by inducing membrane blebbing, disruption and lysis. In addition, these peptides bind to red blood cells but are non-hemolytic. From the KTP derivatives tested, amidated KTP proves to be the most active antibacterial agent. The combination of analgesia and antibacterial activities with absence of toxicity is highly appealing from the clinical point of view and broadens the therapeutic potential and application of kyotorphin peptides.

60 APPLIED LIFE SCIENCES↗

Phase stability, structures and properties of the (Bi{sub 2}){sub m} (Bi{sub 2}Te{sub 3}){sub n} natural superlattices

The phase stability of the (Bi{sub 2}){sub m} (Bi{sub 2}Te{sub 3}){sub n} natural superlattices has been investigated through the low temperature solid state synthesis of a number of new binary Bi{sub x}Te{sub 1-x} compositions. Powder X-ray diffraction revealed that an infinitely adaptive series forms for 0.44{<=}x{<=}0.70, while an unusual 2-phase region with continuously changing compositions is observed for 0.41{<=}x{<=}0.43. For x>0.70, mixtures of elemental Bi and an almost constant composition (Bi{sub 2}){sub m} (Bi{sub 2}Te{sub 3}){sub n} phase are observed. Rietveld analysis of synchrotron X-ray powder diffraction data collected on Bi{sub 2}Te (m=2, n=1) revealed substantial interchange of Bi and Te between Bi{sub 2} and Bi{sub 2}Te{sub 3} blocks, demonstrating that the block compositions are variable. All investigated phase pure compositions are degenerate semiconductors with low residual resistivity ratios and moderate positive magnetoresistances (R/R{sub 0}=1.05 in 9 T). The maximum Seebeck coefficient is +80 {mu}V K{sup -1} for x=0.63, leading to an estimated thermoelectric figure of merit, zT=0.2 at 250 K. - Graphical abstract: An infinite number of possible (Bi{sub 2}){sub m} (Bi{sub 2}Te{sub 3}){sub n} structures exist for Bi{sub x}Te{sub 1-x} compositions between x=0.44 and x=0.70. Compositions near x=2/3 are promising p-type thermoelectrics. Highlights: Black-Right-Pointing-Pointer Phase Stability of the (Bi{sub 2}){sub m}{center_dot}(Bi{sub 2}Te{sub 3}){sub n} Natural Superlattices. Black-Right-Pointing-Pointer Thermoelectric Properties in the Bi{sub x}Te{sub 1-x} Phase Diagram. Black-Right-Pointing-Pointer Crystal Structure of Bi{sub 2}Te from Synchrotron X-ray Powder Diffraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of deformation on the electronic properties of B-C-N nanotubes

We apply first-principles methods, using density functional theory, to investigate the effects of flattening deformation on the electronic properties of BC{sub 2}N and C-doped BNNTs. Four different types of BC{sub 2}N structures are considered. Two of them are semiconductors, and the radial compression produces a significant reduction of the energy band gap. The other two types of structures are metallic, and the effect of radial compression is quite distinct. For one of them it is found the opening of a small band gap, and for the other one no changes are observed. For C-doped tubes, it is also found that the electronic properties undergo significant modifications when subjected to radial compression. - Graphical Abstract: We apply first-principles methods, using density functional theory, to investigate the effects of flattening deformation on the electronic properties of BC{sub 2}N and C-doped BNNTs. Four different types of BC{sub 2}N structures are considered. Two of them are semiconductors, and the radial compression produces a significant reduction of the energy band gap. The other two types of structures are metallic, and the effect of radial compression is quite distinct. For one of them it is found the opening of a small band gap, and for the other one no changes are observed. For C-doped tubes, it is also found that the electronic properties undergo significant modifications when subjected to radial compression. Highlights: Black-Right-Pointing-Pointer We investigated electronic properties of flattened BC{sub 2}N nanotubes. Black-Right-Pointing-Pointer The electronic states depend strongly on compression. Black-Right-Pointing-Pointer It is studied flattened BN nanotubes doped with a carbon atom. Black-Right-Pointing-Pointer The flattened C-doped structures, presents a significant reduction of the gap.

36 MATERIALS SCIENCE↗

Flat Lens Focusing Demonstrated With Left-Handed Metamaterial

Left-handed metamaterials (LHM's) are a new media engineered to possess an effective negative index of refraction over a selected frequency range. This characteristic enables LHM's to exhibit physical properties never before observed. In particular, a negative index of refraction should cause electromagnetic radiation to refract or bend at a negative angle when entering an LHM, as shown in the figure above on the left. The figure on the right shows that this property could be used to bring radiation to a focus with a flat LHM lens. The advantage of a flat lens in comparison to a conventional curved lens is that the focal length could be varied simply by adjusting the distance between the lens and the electromagnetic wave source. In this in-house work, researchers at the NASA Glenn Research Center developed a computational model for LHM's with the three-dimensional electromagnetic commercial code Microwave Studio, constructed an LHM flat lens, and used it to experimentally demonstrate the reversed refraction and flat lens focusing of microwave radiation.

Wilson, Jeffrey D.↗

Investigations on hydrogen storage properties of Mg{sub 2}Ni+x wt% LaMg{sub 2}Ni (x=0, 10, 20, 30) composites

Mg{sub 2}Ni+x wt% LaMg{sub 2}Ni (x=0, 10, 20, 30) composites have been prepared by ball milling Mg{sub 2}Ni and LaMg{sub 2}Ni hydrides. X-ray Diffraction indicates that the composites consist of LaH{sub 3} and Mg{sub 2}NiH{sub 4} phases. Mg{sub 2}NiH{sub 4} phase transforms between with Mg{sub 2}Ni phase during hydriding/dehydriding cycling, while the LaH{sub 3} phase exists still after dehydriding process. Backscatter Electron results reveal that the LaH{sub 3} phase, which is decomposed from hydrided LaMg{sub 2}Ni, distributes in Mg{sub 2}Ni alloy homogeneously after ball milling procedure. Hydriding/Dehydriding measurements indicate significant improvement in reversible hydrogen storage properties of the composites over Mg{sub 2}Ni at low temperature. At 473 K, the hydrogen storage capacity of Mg{sub 2}Ni+20 wt% LaMg{sub 2}Ni composite reaches 3.22 wt% and can reversely desorb hydrogen completely, while the pure Mg{sub 2}Ni hydride is hardly desorbs hydrogen at this temperature. The improvement in the hydrogen storage properties is attributed to the existence of LaH{sub 3} phase in the composites. - Graphical abstract: The Mg{sub 2}Ni + x wt% LaMg{sub 2}Ni (x=10, 20, 30) composites display enhancement on reversible hydrogen storage properties compared with that of pure Mg{sub 2}Ni. Highlights: Black-Right-Pointing-Pointer Tittle La is introduced into Mg{sub 2}Ni alloy without multiphase created. Black-Right-Pointing-Pointer La is introduced into Mg{sub 2}Ni by hydrogen decomposed ball-milling. Black-Right-Pointing-Pointer Reversible hydrogen storage properties at low temperature are improved. Black-Right-Pointing-Pointer Hydrogen storage capacity of composites is beyond 3 wt% at 473 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solution‐Phase Metathesis of Li 3 N and FeCl 3 to Synthesize Fe 2 N/Fe 3 N Nanoparticles

Soft magnetic materials play key roles in the flow of energy in electrically driven machines and power conversion electronics, and there is a great need for improvements in their magnetic properties to provide the right combination of high saturation magnetization, low coercivity, and high permeability. Most phases of iron nitride (Fe x N) are soft magnetic materials with these characteristics, but they exist as numerous phases which are not all stoichiometric compounds. While the production and magnetic properties of the different phases of bulk iron nitride are well known, accessing phase‐pure nanoscale iron nitride consistently remains a challenge. Most methods for the synthesis of iron nitride nanoparticles require complicated apparatus to achieve high‐temperature nitriding of nanoparticle precursors with gaseous nitrogen sources such as ammonia. The first solution‐phase metathesis reaction between FeCl 3 and Li 3 N in oleylamine is developed to directly synthesize Fe 2 N/Fe 3 N nanoparticles, requiring only a fume hood, glove box, standard chemistry laboratory glassware, and equipment. Finally, the ≈10–15 nm spheres display nearly soft magnetic behavior with a saturation magnetization ≈50–60 A m 2 kg −1 , coercivities between 40–50 kA m −1 , and susceptibility values from 0.0001–0.0006 m 3 kg −1 , well within the ranges reported with other published Fe x N nanoparticle synthesis methods.

iron nitride↗

Three tetranuclear copper(II) cluster-based complexes constructed from 4-amino-1,2,4-triazole and different aromatic carboxylates: Assembly, structures, electrochemical and magnetic properties

Three new tetranuclear copper(II) cluster-based complexes constructed from 4-amino-1,2,4-triazole (atrz) and three types of aromatic carboxylates, [Cu{sub 4}({mu}{sub 3}-OH){sub 2}(atrz){sub 2}(DNBA){sub 6}] (1), [Cu{sub 4}({mu}{sub 3}-OH){sub 2}(atrz){sub 2}(1,3-BDC){sub 3}]{center_dot}2H{sub 2}O (2) and [Cu{sub 4}({mu}{sub 3}-OH){sub 2}(atrz){sub 2}(SIP){sub 2}]{center_dot}4H{sub 2}O (3) (HDNBA=3,5-dinitrobenzoic acid, 1,3-H{sub 2}BDC=1,3-benzenedicarboxylic acid and NaH{sub 2}SIP=sodium 5-sulfoisophthalate), have been hydrothermally synthesized and structurally characterized. Complex 1 displays a single-molecular Cu{sup II}{sub 4} cluster structure, which is further connected by the intermolecular hydrogen-bonding interactions to form a 2D supramolecular layer. In 2, there also exist tetranuclear Cu{sup II}{sub 4} clusters, which are linked by the 1,3-BDC anions to give a 3D NaCl-type framework. In 3, the Cu{sup II}{sub 4} clusters are connected by the carboxyl and sulfo groups of SIP anions to generate 3D (4,8)-connected framework with a (4{sup 10}{center_dot}6{sup 14}{center_dot}8{sup 4})(4{sup 5}{center_dot}6){sub 2} topology. The atrz ligand conduces to the construction of tetranuclear copper(II) clusters and the carboxylates with different non-carboxyl substituent show important effects on the final structures of the title complexes. The electrochemical and magnetic properties of 1-3 have been investigated. - Graphical abstract: Three tetranuclear copper(II) cluster-based complexes based on different carboxylates have been synthesized under hydrothermal conditions. The carboxylate anions play a key role in the formation of three different structures. Highlights: Black-Right-Pointing-Pointer Three new tetranuclear copper(II) cluster-based complexes have been obtained. Black-Right-Pointing-Pointer The atrz conduces to the construction of tetranuclear copper(II) clusters. Black-Right-Pointing-Pointer Carboxylates show important effect on the structures of title complexes. Black-Right-Pointing-Pointer Magnetic properties and electrochemical behaviors have been reported.

36 MATERIALS SCIENCE↗

Influence of structural distortions upon photoluminescence properties of Eu{sup 3+} and Tb{sup 3+} activated Na{sub 3}Ln(BO{sub 3}){sub 2} (Ln=Y, Gd) borates

The comparative study of the structure and photoluminescence (PL) properties of the Eu{sup 3+} and Tb{sup 3+} activated Na{sub 3}Ln(BO{sub 3}){sub 2}, with Ln=Y, Gd, showed the important role of the host lattice structure upon PL. Higher emission intensities of Eu{sup 3+} and Tb{sup 3+} are observed for Na{sub 3}Gd(BO{sub 3}){sub 2} than for Na{sub 3}Y(BO{sub 3}){sub 2}, through direct Eu{sup 3+} excitation at 395 nm for Eu{sup 3+} doped borates, and through Gd{sup 3+} excitation around 280 nm for Tb{sup 3+} doped borates. This higher performance for Na{sub 3}Gd(BO{sub 3}){sub 2} is due to the less regular environment of Eu{sup 3+} (Tb{sup 3+}) in the Gd sites than in the Y sites and to energy transfer from Gd{sup 3+} to Eu{sup 3+}(Tb{sup 3+}). The smaller critical concentration in Na{sub 3}Ln{sub 1-x}Tb{sub x}(BO{sub 3}){sub 2} observed for Ln=Gd, x=0.5, compared to x=0.6 for Ln=Y, is explained by shorter Ln-Ln distances (4.11 A for Gd-Gd vs. 4.59 A for Y-Y). Both Na{sub 3}Y{sub 0.4}Tb{sub 0.6}(BO{sub 3}){sub 2} and Na{sub 3}Gd{sub 0.5}Tb{sub 0.5}(BO{sub 3}){sub 2} show intense green emission under UV excitation. - Graphical abstract: The PL properties of Eu{sup 3+} and Tb{sup 3+} are studied in Na{sub 3}Ln(BO{sub 3}){sub 2} (Ln=Y, Gd) borates. Eu{sup 3+} and Tb{sup 3+}exhibits higher emission intensity in Na{sub 3}Gd(BO{sub 3}){sub 2} compared to Na{sub 3}Y(BO{sub 3}){sub 2} due to the less regular environment of the Gd{sup 3+} ion. Energy transfer from Gd{sup 3+} to Tb{sup 3+} is observed. Highlights: Black-Right-Pointing-Pointer Crystal structure of Na{sub 3}Gd(BO{sub 3}){sub 2} by X-ray powder diffraction. Black-Right-Pointing-Pointer Photoluminescence properties of Eu{sup 3+} and Tb{sup 3+} doped Na{sub 3}Ln(BO{sub 3}){sub 2} (Ln=Y, Gd). Black-Right-Pointing-Pointer Higher Eu{sup 3+} and Tb{sup 3+} emission for Na{sub 3}Gd(BO{sub 3}){sub 2} due to an irregular environment of Gd{sup 3+}. Black-Right-Pointing-Pointer Higher Eu{sup 3+} and Tb{sup 3+} emission for Na{sub 3}Gd(BO{sub 3}){sub 2} due to energy transfer from Gd{sup 3+}. Black-Right-Pointing-Pointer Lower Tb{sup 3+} critical concentration for Na{sub 3}Gd(BO{sub 3}){sub 2} due to short Gd{sup 3+}-Gd{sup 3+} distances.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Facile synthesis and electrochemical characterization of Sn{sub 4}Ni{sub 3}/C nanocomposites as anode materials for lithium ion batteries

Sn{sub 4}Ni{sub 3}/C nanocomposites were synthesized by a pyrolyzing-annealing two-step strategy. The phase structure, carbon content and morphology of the nanocomposites were investigated. The results reveal that the crystallinity, carbon structure and purity were enhanced obviously after heat-treatment. Electrochemical performance was evaluated by cyclic voltammograms (CV), galvanostatic discharge/charge and electrochemical impedance spectra (EIS). The annealed Sn{sub 4}Ni{sub 3}/C powders deliver an initial charge capacity of 525.2 mA h g{sup -1}, 400 mA h g{sup -1} over 10 cycles at 36 mA g{sup -1}, >300 mA h g{sup -1} after 40 cycles at 72 mA g{sup -1} and maintain 240 mA h g{sup -1} for 40 cycles at 150 mA g{sup -1}. TEM investigation of the cycled electrodes shows the discharge/charge process neither destroyed the structure of nanocomposites nor changed the crystallinity of the materials. So the high capacity and stable cyclability are ascribed to the synergetic effect of ductile nickel and conductive carbon constituent and the influence of heat-treatment. - Graphical abstract: TEM image of the annealed Sn{sub 4}Ni{sub 3}/C nanocomposites reveals that the crystallized Sn{sub 4}Ni{sub 3} nanoparticles are dispersed in the carbon layer. The synergetic effect of ductile Ni and carbon layer is beneficial to buffer the volume change of Sn during discharge/charge process, thus improving the electrochemical performance when used as anode materials for lithium ion batteries. Highlights: Black-Right-Pointing-Pointer Sn{sub 4}Ni{sub 3} nanoparticles well dispersed in carbon matrix were successfully fabricated. Black-Right-Pointing-Pointer Stable cycling property was achieved due to the synergetic effect of Ni and carbon. Black-Right-Pointing-Pointer The cycling process did not change the structure and crystallinity of the materials.

36 MATERIALS SCIENCE↗