Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pc”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Three-dimensional axisymmetric ball model for the PC-TAP program

Spherical-geometry solids' thermal modeling is presently undertaken with a three-dimensional FEM method that can be used in conjunction with the IBM-PC Thermal Analyzer Program (TAP). The elements of the model's nodal network are spherical triangles having approximately equivalent volumes for transient cases, thereby decreasing computer run times. Attention is given to results for the three test cases to which the model has been applied, which are compared with results from analytical closed-form solutions. Absolute temperature errors not greater than 1 percent are indicated by the comparisons.

Pidcoke, L. H.↗
NASA NTRS1987

Personal computer (PC) based image processing applied to fluid mechanics research

A PC based image processing system was employed to determine the instantaneous velocity field of a two-dimensional unsteady flow. The flow was visualized using a suspension of seeding particles in water, and a laser sheet for illumination. With a finite time exposure, the particle motion was captured on a photograph as a pattern of streaks. The streak pattern was digitized and processsed using various imaging operations, including contrast manipulation, noise cleaning, filtering, statistical differencing, and thresholding. Information concerning the velocity was extracted from the enhanced image by measuring the length and orientation of the individual streaks. The fluid velocities deduced from the randomly distributed particle streaks were interpolated to obtain velocities at uniform grid points. For the interpolation a simple convolution technique with an adaptive Gaussian window was used. The results are compared with a numerical prediction by a Navier-Stokes commputation.

Cho, Y.-C.↗
NASA NTRS1988

PC analysis of an acousto-ultrasonic signal

An introduction is given to PC software developed to analyze a digitized signal. The specific way in which the software was implemented and the relative ease with which the same software can be implemented in different systems for various applications are discussed. The basic equations and related theory used in the software are furnished. Specifically, mention is made of signal digitization, dc biasing, Fourier analysis, moment analysis, digital filtering, and transfer functions. Examples of calculations are given to indicate the physical significance of variables calculated from the frequency domain via moment equations.

Kiernan, M. T.↗
NASA NTRS1987

AUTOPLAN: A PC-based automated mission planning tool

A PC-based automated mission and resource planning tool, AUTOPLAN, is described, with application to small-scale planning and scheduling systems in the Space Station program. The input is a proposed mission profile, including mission duration, number of allowable slip periods, and requirement profiles for one or more resources as a function of time. A corresponding availability profile is also entered for each resource over the whole time interval under study. AUTOPLAN determines all integrated schedules which do not require more than the available resources.

Paterra, Frank C.↗
NASA NTRS1985

The Design of PC/MISI, a PC-Based Common User Interface to Remote Information Storage and Retrieval Systems

The amount of information contained in the data bases of large-scale information storage and retrieval systems is very large and growing at a rapid rate. The methods available for assessing this information have not been successful in making the information easily available to the people who have the greatest need for it. This thesis describes the design of a personal computer based system which will provide a means for these individuals to retrieve this data through one standardized interface. The thesis identifies each of the major problems associated with providing access to casual users of IS and R systems and describes the manner in which these problems are to be solved by the utilization of the local processing power of a PC. Additional capabilities, not available with standard access methods, are also provided to improve the user's ability to make use of this information. The design of PC/MISI is intended to facilitate its use as a research vehicle. Evaluation mechanisms and possible areas of future research are described. The PC/MISI development effort is part of a larger research effort directed at improving access to remote IS and R systems. This research effort, supported in part by NASA, is also reviewed.

Dominick, Wayne D.↗
NASA NTRS1984

General specifications for the development of a USL NASA PC R and D statistical analysis support package

The University of Southwestern Louisiana (USL) NASA PC R and D statistical analysis support package is designed to be a three-level package to allow statistical analysis for a variety of applications within the USL Data Base Management System (DBMS) contract work. The design addresses usage of the statistical facilities as a library package, as an interactive statistical analysis system, and as a batch processing package.

Dominick, Wayne D.↗
NASA NTRS1984

The USL NASA PC R and D interactive presentation development system

The Interactive Presentation Development System (IPFS) is a highly interactive system for creating, editing, and displaying video presentation sequences, e.g., for developing and presenting displays of instructional material similiar to overhead transparency or slide presentations. However, since this system is PC-based, users (instructors) can step through sequences forward or backward, focusing attention to areas of the display with special cursor pointers. Additionally, screen displays may be dynamically modified during the presentation to show assignments or to answer questions, much like a traditional blackboard. This system is now implemented at the University of Southwestern Louisiana for use within the piloting phases of the NASA contract work.

Dominick, Wayne D.↗
NASA NTRS1989

Application of a PC based, real-time, data-aquisition system in rotorcraft wind-tunnel testing

Data has been acquired for a rotocraft test in the NASA Langley Transonic Dynamics Tunnel using a desktop data acquisition system. The system, which consists of an IBM Personal Computer AT (PC-AT) and an Omega Engineering OM-900 Stand-Alone Interface System, is well suited for acquiring high speed data on a limited number of channels. The data acquisition system and the interrupt driven software which provides the capability for near real-time cyclic data acquisition as well as data storage and display are described.

Wilbur, Matthew L.↗
NASA NTRS1989

A PC-based interactive imaging system designed for Insat data analysis and monsoon studies

A PC-based interactive image processing system to analyze Indian Geosynchronous Satellite (Insat) data has been developed for Asian monsoon studies. The system, known as a Microbased Image Display and Graphics Enhancement Tool (MIDGET), is designed as a workstation terminal in a supercomputer environment. The MIDGET system is described and the analysis procedures used with the system are discussed. The applications of the MIDGET system include monitoring monsoon evolution and the behavior of organized tropical storms, the analysis of low-frequency intraseasonal oscillations, diagnostic studies of cloudiness, retrieval of monsoon precipitation, and statistical prediction of monsoon cloud bands associated with intraseasonal fluctuations of monsoon rainfall.

Smith, Eric A.↗
NASA NTRS1989

PC based graphic display real-time particle beam uniformity

A technique has been developed to support the study of the effects of cosmic rays on integrated circuits. The system is designed to determine the particle distribution across the surface of an integrated circuit accurately while the circuit is bombarded by a particle beam. The system uses photomultiplier tubes, an octal discriminator, a computer-controlled NIM quad counter, and an IBM PC. It provides real-time operator feedback for fast beam tuning and monitors momentary fluctuations in the particle beam. The hardware, software, and system performance are described.

Huebner, M. A.↗
NASA NTRS1990

Pc 5 pulsations in the outer dawn magnetosphere seen by ISEE 1 and 2

A long-lasting Pc 5 pulsation at the dawn flank of the magnetosphere is studied using particle and field instrumentation from the ISEE 1 and 2 satellites. Electric field and particle modulation signatures were clearer than magnetic field variations, consistent with the satellites' position in latitude near the equatorial node of a fundamental resonance. Pulsation flow velocities along the ISEE 1 trajectory were calculated from particle characteristics using data from several instruments and from electric and magnetic field data. These flow velocities were all consistent with each other, but the velocities derived from plasma and energetic particle observations were a factor of 2.5 larger than velocities derived from the fields data. In contrast to observations of pulsations during magnetic storms, which often involve resonant or gyrating particle behavior, particles at all energies sampled (10 eV to 200 keV) appeared to respond passively to the pulsation throughout most of the period of interest.

Mitchell, D. G.↗
NASA NTRS1990

Observation and theory of Pc 5 waves with harmonically related transverse and compressional components

The properties of 23 magnetic pulsation events observed by the AMPTE CCE spacecraft are studied. These events are selected on the basis of the field magnitude which oscillated at the second harmonic of a simultaneously present transverse oscillation. The events have a second harmonic period of 80-600 s (roughly the Pc 5 range), are observed in cluster in the dawn (0300-0800 magnetic local time, MLT) and dusk (1600-2100 MLT) sectors, and are localized near the magnetic equator. Although the azimuthal wave number estimated from an ion finite Larmor radius effect, is generally large (about 50), there is a marked difference between the events observed in the dawn and dusk sectors. In the dawn sector the waves have low frequencies (1-5 mHz), indicate left-hand polarization with respect to the ambient magnetic field, and propagate eastward with respect to the spacecraft. In the dusk sector the waves have high frequencies (5-15 mHz), indicate right-hand polarization, and propagate westward. It is suggested that the waves are all westward propagating in the plasma rest frame and that local-time-dependent Doppler shift is the reason for the local time dependence of the wave properties.

Takahashi, K.↗
NASA NTRS1990

Ion flux oscillations associated with a radially polarized transverse Pc 5 magnetic pulsation

The AMPTE CCE spacecraft observed a transverse Pc 5 magnetic pulsation (period of about 200 s) at 2155-2310 UT on November 20, 1985, at a radial distance of 5.7 - 7.0 earth radii, at a magnetic latitude of 1.2 - 19 deg, and near 1300 magnetic local time. The magnetic pulsation exhibits properties consistent with a standing Alfven wave with a second-harmonic standing structure along the ambient magnetic field. The amplitude and the phase of the flux pulsation are found to be a function of the particle detector look direction and the particle energy. The observed energy dependence of the shift is interpreted as the result of a drift-bounce resonance of the ions with the wave. From this interpretation it follows that the wave propagated westward with an azimuthal wave number of approximately 100. Thus the study demonstrates that particle data can be useful for determining the spatial structure of some types of ULF waves.

Takahashi, K.↗
NASA NTRS1990

AMPTE CCE observations of Pc 3-4 pulsations at L = 2-6

Magnetic field data acquired by the AMPTE CCE satellite from L = 2-6 are analyzed. A procedure was specially developed to reduce the artificial modulation and noise in magnetic field measurements, making it possible to detect Pc 3-4 pulsations with amplitudes only 1 nT or less, even for L values less than 3. A survey of 41 CCE passes in L = 2-6 and in the postnoon sector showed that the most commonly observed pulsations in this region were the east-west oscillations of magnetic field with clearly L-dependent frequencies; these are identified as the toroidal mode standing Alfven waves. A relationship was found between the pulsation frequency and plasma density, showing that the pulsation data can be used to estimate the plasma mass density in the inner magnetosphere.

Takahashi, Kazue↗
NASA NTRS1991

A PC-based hardware implementation of the maximum-likelihood classifier for the Shuttle Ice Detection System

A PC-based near-real time implementation of a two-channel maximum-likelihood classifier is described. The statistical distribution of the reflectance characteristics of ice, frost, and water formation on spray-on-foam-insulation, which covers the External Tank surface of the Space Shuttle, is acquired. The classification technique is based on these statistics. The computer, set in either a training or a classifying mode, learns the statistics of the various classes, or produces a color-coded image denoting the respective categories of classification. The classified results are memory-mapped for efficiency. The speed of the classification process is only limited by the speed of the digital frame grabber and the software that interfaces the frame grabber to the monitor. The process took 4 seconds for a 512 x 480 pixel image.

Jaggi, S.↗
NASA NTRS1992

Operation and design considerations for unsteady data acquisition with PC-based systems in high Reynolds number hypersonic flowfields

Operation and design considerations for personal-computer-based data acquisition are analyzed, and a system is created that is portable, inexpensive, and capable of high-frequency response. This system performed well when given an extensive analysis of the characteristics of the radio-frequency noise in the test environment. The system architecture is well-suited for support of high-frequency data acquisition from both pressure transducers and high-frequency-response thermocouple gauges. As configured, the system provides a data resolution of approximately 0.09 psia and 0.56 F. Considering the constraints placed upon this design, this data resolution is acceptable. The $5000 budget did require use of an existing PC and rental of signal-conditioning equipment.

Flanagan, M. J., Jr.↗
NASA NTRS1993

PC-Based Interface Circuit For Communication Of Telemetric Data

PCIO card in input/output interface-circuit card enabling computer based on ISA bus to transmit and receive high-speed, synchronous serial data and clock signals. Designed specifically to plug into IBM PC-AT or compatible computer and to handle input and output of data in packet formats like those of telemetric data streams used throughout NASA and aerospace industry. Reduces amount of auxiliary equipment needed.

Flatley, Thomas P.↗
NASA NTRS1992

Determination of high temperature strains using a PC based vision system

With the widespread availability of video digitizers and cheap personal computers, the use of computer vision as an experimental tool is becoming common place. These systems are being used to make a wide variety of measurements that range from simple surface characterization to velocity profiles. The Sub-Pixel Digital Image Correlation technique has been developed to measure full field displacement and gradients of the surface of an object subjected to a driving force. The technique has shown its utility by measuring the deformation and movement of objects that range from simple translation to fluid velocity profiles to crack tip deformation of solid rocket fuel. This technique has recently been improved and used to measure the surface displacement field of an object at high temperature. The development of a PC based Sub-Pixel Digital Image Correlation system has yielded an accurate and easy to use system for measuring surface displacements and gradients. Experiments have been performed to show the system is viable for measuring thermal strain.

Mcneill, Stephen R.↗