SEARCH · Search NASA

Results for “Personnel Selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

All sources NASA NTRS DOE OSTI

NASA NTRS1992

Architecture options for the Manned Transportation Systems Study

The Manned Transpiration System (MTS) Study was undertaken to develop key data relative to the United States manned transportation system, and specifically, the next manned system we build. These data are being developed in the context of Earth-to-orbit architectures necessary to deliver all government payloads to low Earth orbit (LEO). Launch systems, transition between current and new systems, along with system functions (personnel and/or cargo to/from orbit) are presented. Several key considerations being debated today were used to aid our selection of Earth-to-orbit (ETO) architectures for evaluation. Other consideration s not being addressed in this initial effort that require additional study are identified Twenty-five launch systems were used to define a set of 18 architectures. These architectures are discussed in context with they key considerations being addressed in this study. Payload manufacturing ground rules are presented to provide an understanding of our approach in establishing flight rates from the MTS mission models. Furthermore, a discussion of manned system flight rates and relative personnel safety characteristics differences is presented. Comparative architecture results will not be available until May 1992.

M T Gaunce↗

DOE OSTI2021

Performance Results for Sensor Assignment Problem as Solved on a Multi-Node Cluster

An earlier report described a procedure for optimal sensor set selection and its implementation on a computational cluster. This new and innovative capability was developed to facilitate a reduction in operations staffing levels to improve plant economics. By automating surveillance and maintenance tasks through early detection of degrading sensors and equipment, staff can be more efficiently deployed. The method uses automated reasoning and domain knowledge in the form of the conservation equations to infer from plant measurements the state of equipment health. Inclusion of domain knowledge addresses the problem that exists with pure data-driven methods that there are no rigorous guidelines for determining what constitutes an adequate sensor set. Formalizing the procedure for sensor set selection as we have done results in a more reliable and explainable diagnosis of plant equipment health. Importantly, from the standpoint of the plant owner, personnel are provided with an early and explicit diagnosis of an equipment problem. That in principle automates the process and eliminates having to send personnel into the plant to find the cause as typically occurs when a data-driven method detects an anomaly. In this report we describe first results obtained using a computational cluster to solve the sensor set selection problem as framed above. The case described addresses the problem of equipment health monitoring in the high-pressure (HP) feedwater system of a pressurized light water reactor as seen through the eyes of our collaborating utility partner. Maintenance of this system can amount to millions of dollars per year if equipment health issues go undiagnosed and lead to loss of function. On examining the potential that is inherent in the installed sensor set for diagnosing equipment health degradation, it was found that greater fault resolution capability can be achieved using a sensor set that is 20 percent fewer in number. The take-away is that compared to the installed sensor set there exists a more strategic assignment of sensors that will furnish better health monitoring capability and with fewer sensors. Where the problem defies solution by manual inspection, as is the case here, one can be found by an algorithm. The solution was obtained in four hours using 30 computational cores. The HP feedwater problem as posed above illustrates the added value of approaching the sensor selection problem as one amenable to algorithmic solution. This problem is of interest to advanced reactor designers and to utilities that are setting up remote monitoring and diagnostic centers.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

NASA NTRS1972

Corn blight review: Sampling model and ground data measurements program

The sampling plan involved the selection of the study area, determination of the flightline and segment sample design within the study area, and determination of a field sample design. Initial interview survey data consisting of crop species acreage and land use were collected. On all corn fields, additional information such as seed type, row direction, population, planting date, ect. were also collected. From this information, sample corn fields were selected to be observed through the growing season on a biweekly basis by county extension personnel.

Allen, R. D.↗

NASA NTRS1988

Controls and guidance: Aeronautics

The overall objective is to provide a validated technology base leading to the development and exploitation of new concepts, analysis and design methodologies, and flight systems for future civil and military aircraft. This will provide increased efficiency, effectiveness, reliability, and safety. The program is organized into generic elements and vehicle-specific elements. The generic elements are control theory, guidance and display concepts, and flight crucial systems. Vehicle-specific elements are generic hypersonics, subsonic transport/commuter/general aviation, rotorcraft, and fighter/attack. Research in the control theory element is directed toward the improved flight control analysis and design methodologies for highly integrated, robust flight control designs. Flight Crucial Systems research is directed toward the development of design, assessment, and validation methodologies for flight crucial systems. The generic hypersonics research concentrates on the integration of flight control, propulsion control, sensors, and displays. The Aeronautical Controls and Guidance Program involves analytical and experimental research by in-house, university, and industry personnel. Extensive use of ground-based simulation is a characteristic of the program with selected flight experiments in a variety of aircraft.

Dibattista, John D.↗

NASA NTRS2008

Behavioral and Psychological Issues in Long Duration Head-down Bed Rest

Behavioral health services, similar to those offered to the U.S. astronauts who complete six-month missions on board the International Space Station, were provided to 13 long-duration head-down bed rest participants. Issues in psychological screening, selection, and support are discussed as they relate to other isolated and confined environments. Psychological services offered to participants are described, and challenges in subject selection and retention are discussed. Psychological support and training provided to both subjects and study personnel have successfully improved the well-being of study participants. Behavioral health services are indispensable to long-duration head-down tilt bed rest studies.

Seaton, Kimberly A.↗

DOE OSTI2023

Prioritizing the selection of CMIP6 model ensemble members for downscaling projections of CONUS temperature and precipitation

Given the mismatch between the large volume of data archived for the sixth phase of the Coupled Model Intercomparison Project (CMIP6) and limited personnel and computational resources for downscaling, only a small fraction of the CMIP6 archive can be downscaled. In this work, we develop an approach to robustly sample projected hydroclimate states in CMIP6 for downscaling to test whether the selection of a single initial condition (IC) ensemble member from each CMIP6 model is sufficient to span the range of modeled hydroclimate over the conterminous United States (CONUS) and CONUS sub-regions. We calculate the pattern-centered root mean square difference of IC ensemble member anomalies relative to each model’s historical climatology for shared socioeconomic pathway (SSP) projections over 30-year time periods and compare the ratio of inter-model to intra-model variability for this metric. Regardless of SSP, inter-model variability is generally much greater than intra-model variability at the scales of the CONUS as a whole, as well as for most CONUS sub-regions. However, for some variables and scenarios, inter- and intra-model variability are similar at sub-CONUS scales, indicating that selecting a single IC ensemble member per model may be sufficient to sample the range of projected hydroclimate states in the 21st Century across CONUS, but for specific regions and variables, more careful selection of ensemble members may be necessary. Regionally resolved Taylor diagrams identify where more IC ensemble member downscaling efforts should be focused if resources are available to do so. Our results suggest that, with parsimonious sampling, the requisite computational expense of downscaling temperature and precipitation fields over the CONUS for subsequent CMIP activities may increase only marginally despite the great increase in data volumes with each successive CMIP phase.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1993

Outgassing Data for Selecting Spacecraft Materials

This tenth compilation of outgassing data of materials intended for spacecraft use supersedes Reference Publication 1124, Revision 2, November 1990. The data were obtained at the Goddard Space Flight Center (GSFC), utilizing equipment developed at Stanford Research Institute (SRI) under contract to the Jet Propulsion Laboratory (JPL). SRI personnel developed an apparatus for determining the mass loss in vacuum and for collecting the outgassed products. The outgassing data have been presented in three different ways in order to facilitate material selection. In Section A, the materials are divided by category into the 18 probable uses, such as adhesives, greases, paints, potting compounds, and so forth. In Section B, all the materials contained in Section A are listed in alphabetical order by the manufacturer's identification. In Section C, the only materials listed are those having 'Total Mass Loss' (TML) and Collected Volatile Condensable Materials (CVCM) equal to or lower than a maximum 1.0 percent TML and a maximum 0.10 percent CVCM. These are grouped by use, as in Section A.

Campbell, William A., Jr.↗

NASA NTRS2002

Lessons learned from Shuttle/Mir: psychosocial countermeasures

BACKGROUND: During future long-duration space missions, countermeasures need to be developed to deal with psychosocial issues that might impact negatively on crewmember performance and well-being. METHODS: In our recently completed NASA-funded study of 5 U.S. astronauts, 8 Russian cosmonauts, and 42 U.S. and 16 Russian mission control personnel who participated in the Shuttle/Mir program, we evaluated a number of important psychosocial issues such as group tension, cohesion, leadership role, and the displacement of negative emotions from crewmembers to people in mission control and from mission control personnel to management. RESULTS: Based on our findings, which are reviewed, a number of psychosocial countermeasures are suggested to help ameliorate the negative impact of potential psychosocial problems during future manned space missions. CONCLUSIONS: Crewmembers should be selected not only to rule out psychopathology but also to select-in for group compatibility and facility in a common language. Training should include briefings and team building related to a number of psychosocial issues and should involve both crewmembers and mission control personnel. During the mission, both experts on the ground and the crewmembers themselves should be alert to potential interpersonal problems, including the displacement of negative emotions from the crew to the ground. Supportive activities should consist of both individual and interpersonal strategies, including an awareness of changing leisure time needs. Finally, attention should be given to postmission readjustment and to supporting the families on Earth.

Non-NASA Center↗

DOE OSTI2022

Characterizing the Payback and Profitability for Automated Heavy Duty Vehicle Platooning

Heavy duty vehicle platooning under highway operating conditions has been projected to provide significant fuel economy gains based on aerodynamic drag improvements of the platooning vehicles. Realizing these benefits and the economic viability under real-world operating conditions presents several challenges. The objective of this paper (the third as part of a series) is to analytically quantify the payback and profitability of heavy-duty vehicles platooning across the U.S. Interstate highway system. In this paper, a rigorous assessment of several factors that influence the platooning system payback for an end-user as well as the revenue potential for suppliers who may be utilizing an equipment lease model dependent on end-user savings, is presented. In this assessment key interactions explored include market adoption rates, platooning velocities, platoon-able daily mileage, platooning likelihood, variations in baseline powertrain fuel economy (diesel or electric), price of fuel (diesel or electricity), platooning fuel economy benefits, price of the added technology, and the impact of natural platooning due to traffic interactions. Further, the paper explores the economic impact of higher levels of vehicle automation for the trailing vehicles in the platoon, where extending the driver Hours of Service (HoS) may provide additional financial benefits. While the approach makes use of a limited fidelity vehicle analytical model for longitudinal dynamics and operations economics, the narrative provides application decision personnel with a mechanism and well-defined set of impact factors to consider as part of their architectural selection process.

33 ADVANCED PROPULSION SYSTEMS↗

NASA NTRS1990

Evaluation of a proposed expert system development methodology: Two case studies

Two expert system development projects were studied to evaluate a proposed Expert Systems Development Methodology (ESDM). The ESDM was developed to provide guidance to managers and technical personnel and serve as a standard in the development of expert systems. It was agreed that the proposed ESDM must be evaluated before it could be adopted; therefore a study was planned for its evaluation. This detailed study is now underway. Before the study began, however, two ongoing projects were selected for a retrospective evaluation. They were the Ranging Equipment Diagnostic Expert System (REDEX) and the Backup Control Mode Analysis and Utility System (BCAUS). Both projects were approximately 1 year into development. Interviews of project personnel were conducted, and the resulting data was used to prepare the retrospective evaluation. Decision models of the two projects were constructed and used to evaluate the completeness and accuracy of key provisions of ESDM. A major conclusion reached from these case studies is that suitability and risk analysis should be required for all AI projects, large and small. Further, the objectives of each stage of development during a project should be selected to reduce the next largest area of risk or uncertainty on the project.

Gilstrap, Lewey↗

NASA NTRSDate not supplied

Rapid Assessment of a Lunar Surface Laboratory Module

Johnson Space Center is piloting an innovation team known as the Forge to perform rapid turnaround, concurrent engineering studies. The Forge is intended to be able to pull together a team of strategically selected domain experts to innovatively solve a specified problem within a short period of time. The Forge’s inaugural project being the development of a Lunar Surface Laboratory Module concept. The lab module is intended as an option for the Artemis program’s Lunar Architecture Team. The lab module may allow for increased science productivity and return on investment than a surface architecture with only the habitat. This paper will discuss the configuration of the Lunar Laboratory module, including the pressure vessel, its placement relative to the Surface Habitat and Pressurized Rover, and internal architecture. In order to determine the suitability of such a design, a human factors evaluation is conducted. Historically, a human factors evaluation of a habitable volume could require a month or longer, including time needed to prepare a test plan, conduct the evaluation, compile the data, and produce a report. The entire Forge effort will only last for five weeks, forcing the creation of a rapid assessment process. This rapid assessment includes three evaluation studies, all conducted and processed in the space of a single day, to determine the acceptability of the resulting design. The first evaluation is a card sort evaluation of the laboratory instruments. A brief discussion of the card sort evaluation is provided. This card sort is focused on the relative positioning of the laboratory instruments, determining whether a given instrument should be adjacent to, or separated from, another. It will use human factors personnel and both life and physical scientists as subject matter experts. The second evaluation is a science productivity tabletop evaluation. This evaluation focuses on the selection of instruments and the number of instruments, attempting to assess the amount of work the crew will be able to use the facility to do. It uses life and physical science personnel as subject matter experts. The third evaluation is a CAD or Virtual Reality human factors walkthrough evaluation. This evaluation focuses on the layout of the lab module and its connectivity to the basecamp’s pressurized elements. If possible, astronauts will be used as subject matter experts. Each of these evaluations will focus primarily on objective data with limited subjective comments, reducing the time required for processing responses. The results of each evaluation and their implications will be discussed. Based on the evaluation data, an overall acceptability of the Lunar Surface Laboratory Module produced by the Forge study can be determined. Lessons learned and recommendations for future use of the human factors rapid assessment process in early design trades will also be provided.

Lunar Laboratory↗

NASA NTRS2007

CECE: A Deep Throttling Demonstrator Cryogenic Engine for NASA's Lunar Lander

As one of the first technology development programs awarded under NASA's Vision for Space Exploration, the Pratt & Whitney Rocketdyne (PWR) Deep Throttling, Common Extensible Cryogenic Engine (CECE) program was selected by NASA in November 2004 to begin technology development and demonstration toward a deep throttling, cryogenic Lunar Lander engine for use across multiple human and robotic lunar exploration mission segments with extensibility to Mars. The CECE program leverages the maturity and previous investment of a flight-proven hydrogen/oxygen expander cycle engine, the RL10, to develop and demonstrate an unprecedented combination of reliability, safety, durability, throttlability, and restart capabilities in a high-energy, cryogenic engine. NASA Marshall Space Flight Center and NASA Glenn Research Center personnel were integral design and analysis team members throughout the requirements assessment, propellant studies and the deep throttling demonstrator elements of the program. The testbed selected for the initial deep throttling demonstration phase of this program was a minimally modified RL10 engine, allowing for maximum current production engine commonality and extensibility with minimum program cost. In just nine months from technical program start, CECE Demonstrator No. 1 engine testing in April/May 2006 at PWR's E06 test stand successfully demonstrated in excess of 10:1 throttling of the hydrogen/oxygen expander cycle engine. This test provided an early demonstration of a viable, enabling cryogenic propulsion concept with invaluable system-level technology data acquisition toward design and development risk mitigation for both the subsequent CECE Demonstrator No. 2 program and to the future Lunar Lander Design, Development, Test and Evaluation effort.

Giuliano, Victor J.↗

DOE OSTI2023

J. Robert Oppenheimer: The Atomic Energy Commission and His Security Clearance, Selected Documents

On April 14, 1954, Laboratory employees were formally notified by a “Special Bulletin to All Employees” (Appendix A) that the Atomic Energy Commission had convened a Personnel Security Board, at the request of J. Robert Oppenheimer, to investigate “substantial derogatory information” about their former director. Long on procedural detail and short on specifics, the Bulletin served primarily as an announcement that “A board was accordingly established for the purpose of hearing the case and advising the Commission as to whether or not suspension of clearance of Dr. Oppenheimer should be made permanent.”

99 GENERAL AND MISCELLANEOUS↗

NASA NTRS2003

Microsystems Fabrication Laboratory-New Class 100 Cleanroom Completed and Certified

A new Microsystems Fabrication Laboratory (MFL), a Class 100 cleanroom fabrication facility, was completed and certified in 2002 at the NASA Glenn Research Center. This facility, to be used by Glenn's Instrumentation and Controls Division, was designed and built as part of the NASA Construction of Facilities Program. The design, construction, and certification phases were managed by personnel from Glenn s Facilities and Test Engineering Division. Because of time constraints and the need for specialized cleanroom expertise, this 1000 ft2 laboratory was completed using a design-build procurement. Facility Planning & Resources (Pittsburgh, PA) was selected as the prime contractor and provided the architectural design and project management. A major subcontractor, AdvanceTEC, LLC (Richmond, VA), provided the mechanical and electrical design and performed the construction services. Throughout this fast-track project, Facilities and Test Engineering Division personnel provided overall project management and worked closely with the contractors to ensure that the customers needs were addressed and that the impact of the project implementation was minimized.

Borato, Frances M.↗

DOE OSTI2022

Characterizing Minimum Admissible Separation Distances in Heavy Duty Vehicle Platoons

Heavy duty (HD) vehicles platooning under highway operating conditions, have been projected to provide significant fuel economy (FE) gains based on aerodynamic drag reduction of the platooning vehicles. Realizing these benefits under real-world operating conditions have several challenges. This paper (the second as part of series) quantifies the minimum admissible separation distance between platooning vehicles in HD commercial vehicle (CV) applications. This distance must be set up such that no collision occurs with leading vehicles under all deceleration conditions. In this paper key interactions to characterize this distance are demonstrated. These include, road surface conditions, grade, inter-vehicle communication delays, air-brake lag time, vehicle speed, weight, and aerodynamic drag. It is seen that characterizing the vehicle and road dynamics will be critical in establishing required deceleration or stopping distances for each vehicle in a platoon. The results of the study also necessitate vehicle control systems that can dynamically adjust not only the separation distances but also the braking reference points based on road conditions. The narrative provides application decision personnel with a well-defined set of admissible separation distance impact factors to consider as part of their architecture selection process.

Sujan, Vivek↗

NASA NTRS1972

Apollo experience report: The application of a computerized visualization capability to lunar missions

The development of a computerized capability to depict views from the Apollo spacecraft during a lunar mission was undertaken before the Apollo 8 mission. Such views were considered valuable because of the difficulties in visualizing the complex geometry of the Earth, Moon, Sun, and spacecraft. Such visualization capability originally was desired for spacecraft attitude verification and contingency situations. Improvements were added for later Apollo flights, and results were adopted for several real time and preflight applications. Some specific applications have included crewmember and ground control personnel familiarization, nominal and contingency mission planning, definition of secondary attitude checks for all major thrust maneuvers, and preflight star selection for navigation and for platform alinement. The use of this computerized visualization capability should prove valuable for any future space program as an aid to understanding the geometrical relationships between the spacecraft and the celestial surroundings.

Hyle, C. T.↗

NASA NTRS1991

Medical evaluations on the KC-135 1990 flight report summary

The medical investigations completed on the KC-135 during FY 1990 in support of the development of the Health Maintenance Facility and Medical Operations are discussed. The experiments are comprised of engineering evaluations of medical hardware and medical procedures. The investigating teams are made up of both medical and engineering personnel responsible for the development of medical hardware and medical operations. The hardware evaluated includes dental equipment, a coagulation analyzer, selected pharmaceutical aerosol devices, a prototype air/fluid separator, a prototype packaging and stowage system for medical supplies, a microliter metering system, and a workstation for minor surgical procedures. The results of these engineering evaluations will be used in the design of fleet hardware as well as to identify hardware specific training requirements.

Lloyd, Charles W.↗

NASA NTRS2012

Synthetic and Enhanced Vision Systems for NextGen (SEVS) Simulation and Flight Test Performance Evaluation

The Synthetic and Enhanced Vision Systems for NextGen (SEVS) simulation and flight tests are jointly sponsored by NASA's Aviation Safety Program, Vehicle Systems Safety Technology project and the Federal Aviation Administration (FAA). The flight tests were conducted by a team of Honeywell, Gulfstream Aerospace Corporation and NASA personnel with the goal of obtaining pilot-in-the-loop test data for flight validation, verification, and demonstration of selected SEVS operational and system-level performance capabilities. Nine test flights (38 flight hours) were conducted over the summer and fall of 2011. The evaluations were flown in Gulfstream.s G450 flight test aircraft outfitted with the SEVS technology under very low visibility instrument meteorological conditions. Evaluation pilots flew 108 approaches in low visibility weather conditions (600 ft to 2400 ft visibility) into various airports from Louisiana to Maine. In-situ flight performance and subjective workload and acceptability data were collected in collaboration with ground simulation studies at LaRC.s Research Flight Deck simulator.

Shelton, Kevin J.↗