Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

ATRP Enhances Structural Correlations In Polymerization–Induced Phase Separation**

Synthetic methods to control the structure of materials at sub–micron scales are typically based on the self–assembly of structural building blocks with precise size and morphology. On the other hand, many living systems can generate structure across a broad range of length scales in one step directly from macromolecules, using phase separation. Here, we introduce and control structure at the nano– and microscales through polymerization in the solid state, which has the unusual capability of both triggering and arresting phase separation. In particular, we show that atom transfer radical polymerization (ATRP) enables control of nucleation, growth, and stabilization of phase–separated poly–methylmethacrylate (PMMA) domains in a solid polystyrene (PS) matrix. ATRP yields durable nanostructures with low size dispersity and high degrees of structural correlations. Furthermore, we demonstrate that the length scale of these materials is controlled by the synthesis parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Toward Lithium Recovery Using Modular (and Membraneless) Phase Separation and Extraction (MPSE) Technology with Ionic Liquid (IL) Solvents: Effect of Coatings

In this work, a single-channel slope-plate Modular and Membrane-less Phase Separation and Extraction (MPSE) device was fabricated using 3D printing. The slope-plate was designed with an insertable glass slide to enable surface modification with coatings. Self-assembled monolayers (SAMs) and perfluoropolyether (Zdol) coatings were applied to tailor surface wettability and enhance phase separation. Using a model biphasic system of water and hexadecane, both coatings significantly improved the separation efficiency compared to the uncoated device by promoting selective wetting. Building on these results, lithium extraction from a simulated saline solution was investigated using 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][NTf₂]) as the ionic liquid (IL) extractant. The IL effectively extracted Li⁺ from the aqueous phase in bulk extraction, demonstrating its potential for lithium recovery. However, the low interfacial tension between the IL and aqueous phases posed challenges for phase separation. The application of SAM and Zdol coatings effectively mitigated this issue. Overall, integrating tailored surface chemistry with the slope-plate MPSE design shows great promise as an efficient and scalable platform for studying liquid–liquid separation and optimizing ionic liquid–based extraction processes for lithium recovery from saline sources.

3D printing↗

Simulations of irradiated-enhanced segregation and phase separation in Fe–Cu–Mn alloys

For reactor pressure vessel steels, the addition of Cu, Mn, and Ni has a positive effect on mechanical, corrosion and radiation resistance properties. However, experiments show that radiation-enhanced segregation and/or phase separation is one of important material property degradation processes. In this work, we developed a model integrating rate theory and phase-field approaches to investigate the effect of irradiation on solute segregation and phase separation. The rate theory is used to describe the accumulation and clustering of radiation defects while the phase-field approach describes the effect of radiation defects on phase stability and microstructure evolution. The Fe-Cu-Mn ternary alloy is taken as a model system. The free energies used in the phase-field model are from CALPHAD. Spatial dependent radiation damage from atomistic simulations is introduced into the simulation cell for a given radiation dose rate. The radiation effect on segregation and phase separation is taken into account through the defect concentration dependence of solute mobility. With the model the effect of temperatures and radiation rates on Cu and Mn segregation and Cu-rich phase nucleation are systematically investigated. The segregation and nucleation mechanisms are analyzed. The simulations demonstrated that the nucleus of Cu precipitates has a core-shell composition profile, i.e., Cu rich at center and Mn rich at the interface, in good agreement with the theoretical calculation as well as experimental observations.

Li, Boyan↗

Phase separation in solutions with specific and nonspecific interactions

Protein solutions, which tend to be thermodynamically stable under physiological conditions, can demix into protein-enriched and protein-depleted phases when stressed. Using a lattice-gas model of proteins with both isotropic and specific, directional interactions, we calculate the critical conditions for phase separation for model proteins with up to four patches via Monte Carlo simulations and statistical associating fluid theory. Given a fixed specific interaction strength, the critical value of the isotropic energy, which accounts for dispersion forces and nonspecific interactions, measures the stability of the solution with respect to nonspecific interactions. Phase separation is suppressed by the formation of protein complexes, which effectively passivate the strongly associating sites on the monomers. Nevertheless, we find that protein models with three or more patches can form extended aggregates that phase separate despite the assembly of passivated complexes, even in the absence of nonspecific interactions. We present a unified view of the critical behavior of model fluids with anisotropic interactions, and we discuss the implications of these results for the thermodynamic stability of protein solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Size-Dependent Liquid–Liquid Phase Separation in Atmospherically Relevant Complex Systems

Physical properties of aerosol particles, such as liquid-liquid phase separation (LLPS), have the potential to impact the climate system. Model systems have been shown to have size-dependent LLPS in the submicron regime, yet, these systems are an extreme simplification of ambient aerosol, which can include myriad organic compounds. In our research, we expand the studies of LLPS in particles consisting of ammonium sulfate and more complex organic mixtures from multiple organic compounds to α-pinene secondary organic matter (SOM). All systems display a size-dependent morphology, with small particles remaining homogeneous while large particles phase separate. Surprisingly, three-phase particles were also observed in some of the systems in addition to a new phase state that we have termed channel morphology, which can arise upon efflorescence. The existence of size-dependent LLPS in complex organic mixtures and SOM provides evidence that this is a relevant phenomenon for ambient aerosol and should be considered when modeling atmospheric aerosol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanistic View of hnRNPA2 Low-Complexity Domain Structure, Interactions, and Phase Separation Altered by Mutation and Arginine Methylation

hnRNPA2, a component of RNA-processing membraneless organelles, forms inclusions when mutatedin a syndrome characterized by the degeneration of neurons (bearing features of amyotrophic lateral sclerosis [ALS] and frontotemporal dementia), muscle,and bone. In this work we provide a unified structural view of hnRNPA2 self-assembly, aggregation, and interaction and the distinct effects of small chemical changes—disease mutations and arginine methylation—on these assemblies. The hnRNPA2 low-complexity (LC) domain is compact and intrinsically disordered as a monomer, retaining predominant disorder in a liquid-liquid phase-separated form. Disease mutations D290V and P298L induce aggregation by enhancing and extending, respectively, the aggregation-prone region. Co-aggregating in disease inclusions, hnRNPA2 LC directly interacts with and induces phase separation of TDP-43. Conversely, arginine methylation reduces hnRNPA2 phase separation, disrupting arginine-mediated contacts. These results highlight the mechanistic role of specific LC domain interactions and modifications conserved across many hnRNP family members but altered by aggregation-causing pathological mutations.

59 BASIC BIOLOGICAL SCIENCES↗

Phase separated behavior in yttrium doped CaMnO{sub 3}

Highlights: • Electron doped manganite. • Magnetic phase separation observed. • Structural transition coupled with magnetic transition. - Abstract: The effect of electron doping on the structural, transport, and magnetic properties of Mn (IV)—rich Ca{sub 1−x}Y{sub x}MnO{sub 3} (x ≤ 0.2) samples have been investigated using neutron diffraction, neutron depolarization, magnetization and resistivity techniques. The temperature dependence of resistivity follows the small polaron model and the activation energy exhibits a minimum for x = 0.1 sample. A phase separated magnetic ground state consisting of ferromagnetic domains (∼7 μm) embedded in G-type antiferromagnetic matrix is observed in the sample, x = 0.1. The transition to the long-range magnetically ordered state in this sample is preceded by a Griffith’s phase. On lowering temperature below 300 K a structural transition from orthorhombic structure (Pnma) to a monoclinic structure (P2{sub 1}/m) is observed in the case of x = 0.2 sample. The ferromagnetic behavior in this case is suppressed and the antiferromagnetic ordering is described by coexisting C-type and G-type magnetic structures corresponding to the monoclinic and orthorhombic phases, respectively.

36 MATERIALS SCIENCE↗

Interlamellar Organization of Phase Separated Domains in Multi-Component Lipid Multilayers: Energetic Considerations

A recent experimental study [1] has demonstrated the alignment of phase separated domains across hundreds of bilayer units in multicomponent stacked lipid bilayers. The origin of this alignment is the interlamellar coupling of laterally phase separated domains. Here, we develop a theoretical model that presents the energetics description of this phenomenon based on the minimization of the free energy of the system. Specifically, we use solution theory to estimate the competition between energy and entropy in different stacking configurations. The model furnishes an elemental phase diagram, which maps the domain distributions in terms of the strength of the intra- and inter-layer interactions and estimates the value of inter-layer coupling for complete alignment of domains in the stacks of five and ten bilayers. The area fraction occupied by co-existing phases was calculated for the system of the minimum free energy, which showed a good agreement with experimental observations.

lipid rafts↗

Modulating the Mixing Gibbs Free Energy to Enhance Solid–Liquid Phase Separation for High–Performance Organic Solar Cells

Organic solar cells (OSC) feature a hierarchical structure with the electron donor/acceptor layer sandwiched by anode and cathode, which raises the importance of controlling the molecular crystal orientation, domain size, and vertical distribution to facilitate the charge collection at electrodes. However, the similar conjugated backbone of donor/acceptor material and fast film–formation kinetics have led to spinodal–decomposition–orientated phase separation that result in the film presenting an intimately mixed morphology and random molecular orientation. To solve the issue, the mixing Gibbs free energy–triggered solid–liquid phase separation during the film formation process is enhanced by solidifying one component and solvating the other based on a liquid additive. Following the liquid evaporation process, a favorable vertical distribution is obtained. Meanwhile, the prolonged solvation process enlarges the domain size and assists the molecules to diffuse and orient properly, enabling better exciton/charge dynamics during the power conversion processes. As a result, the fabricated devices exhibit a fill factor over 80% and an efficiency of 18.72%, which is one of the top efficiencies for binary OSCs. In conclusion, insights and a methodology is provided here to manipulate the organic donor/acceptor phase separation in terms of mixing Gibbs free energy.

14 SOLAR ENERGY↗

Suppression of phase separation in AlGaInAs compositionally graded buffers for 1550 nm photovoltaic converters on GaAs

We investigate strategies to suppress phase separation and reduce threading dislocation density (TDD) in AlGaInAs compositionally graded buffers (CGBs) that span the lattice constant range from GaAs to InP. Combining the results from high resolution x-ray diffraction, cathodoluminescence, transmission electron microscopy, and photovoltaic device measurements, we correlate the choices of epitaxial growth conditions with the defect structure of the CGBs and subsequent device performance. Both the use of substrates with high misorientation off (100) toward the (111)A plane and Zn doping instead of Si doping are shown to suppress phase separation and reduce TDD. We demonstrate a 0.74 eV GaInAs device grown on a GaAs substrate offcut 19.5° toward (111)A using a Zn-doped AlGaInAs CGB with TDD = 3.5 ± 0.2 × 10 6 cm -2 that has a bandgap-open circuit voltage offset of only 0.434 V measured under the AM1.5G solar spectrum. We characterized this device under high-intensity irradiance from a 1570 nm laser and measured a 31.9% peak laser power conversion efficiency at 3.6 W/cm 2 irradiance. These results provide a roadmap to the manufacture of laser- and thermal-power conversion devices with the performance and cost-effectiveness needed to drive adoption of these technologies at scale.

14 SOLAR ENERGY↗

Phase Separation kinetics in an Fe-Cr-Al alloy

The {alpha}-{alpha}{prime} phase separation kinetics in a commercial Fe-20 wt.% Cr-6 wt.% Al oxide dispersion-strengthened PM 2000{trademark} steel have been characterized with the complementary techniques atom probe tomography and thermoelectric power measurements during isothermal aging at 673, 708, and 748 K for times up to 3600 h. A progressive decrease in the Al content of the Cr-rich {alpha}{prime} phase was observed at 708 and 748 K with increasing time, but no partitioning was observed at 673 K. The variation in the volume fraction of the {alpha}{prime} phase well inside the coarsening regime, along with the Avrami exponent 1.2 and activation energy 264 kJ mol{sup -1}, obtained after fitting the experimental results to an Austin-Rickett type equation, indicates that phase separation in PM 2000{trademark} is a transient coarsening process with overlapping nucleation, growth, and coarsening stages.

36 MATERIALS SCIENCE↗

Morphology Mapping of Phase-Separated Polymer Films Using Nanothermal Analysis

Polymers films are attractive, in part, because their physical properties can be tuned by blending polymer with complementary characteristics. However, blending is typically challenging because most polymers will undergo phase separation, resulting in unpredictable behavior. Here, we introduce band excitation nanothermal analysis (BE-NanoTA) as a nondestructive AFM-based technique for mapping the near surface, thermal properties of polymeric coatings. BE-NanoTA was used to investigate phase separation and domain growth in poly(styrene-ran-acrylonitrile):poly(methyl methacrylate) SAN:PMMA films. The size and shape of PMMA-rich domains are consistent with prior measurements on the same system using a destructive method, namely UV-ozone etching of PMMA followed by topography mapping using standard AFM. Moreover, new insights into the mechanism of phase separation were uncovered including the observation of SAN- and PMMA-rich channels near the surface at early times as well as small SAN-rich domains trapped within large PMMA domains during intermediate times. Because it is nondestructive, BE-NanoTA can be used to explore in situ phase evolution in soft matter systems (e.g., polymer nanocomposites) which do not lend themselves to the UV-ozone etching method

Nikiforov, Maxim↗

Grafted nanoparticles as soft patchy colloids: Self-assembly versus phase separation

We investigate the thermodynamic behavior of a model polymer-grafted nanoparticle (GNP) system on a fine lattice, using grand canonical Monte Carlo simulations, to compare and contrast the validity of two different models for GNPs: “nanoparticle amphiphiles” versus “patchy particles.” In the former model, continuous self-assembly processes are expected to dominate the system, whereas the latter are characterized by first-order phase separation into novel equilibrium phases such as “empty liquids.” We find that, in general, considering GNPs as amphiphiles within the framework of a recent mean-field theory [Pryamtisyn et al., J. Chem. Phys. 131, 221102 (2009)] provides a qualitatively accurate description of the thermodynamics of GNP systems, revealing either first-order phase separation into two isotropic phases or continuous self-assembly. Our model GNPs display no signs of empty liquid formation, suggesting that these nanoparticles do not provide a route to such phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Examining phase separation and crystallization in glasses with X-ray nano-computed tomography

X-ray nano-computed tomography (nano-CT) is a powerful technique to characterize and visualize 3 dimensional (3D) phenomena in complex glasses at the nanoscale. This technique can offer a unique opportunity to explore the intricate morphology of multicomponent glass and glass-ceramic samples, due to its low X-ray energy and high spatial resolution (down to 50 nm). In the current demonstration paper, nano-CT provided insight into crystallization and phase separation, as well as a variety of other phenomena, including corrosion, fracture, and porosity. At scales ranging from 100 to 20 μm, the microstructures of phase separation in borosilicate, complex silicate, and chalcogenide glass compositions were examined. In addition, crystallites present in simulant nuclear waste glasses, volcanic glasses, and other related samples were explored. Nano-CT analysis can add to the understanding of (1) the formation processes, (2) distributions, interactions, and compositions of phases, and (3) the mechanisms, structures, and growth of crystallization and phase separation. Nano-CT offers wide potential in the field of glass science, especially when (1) common characterization methods are insufficient, (2) simple sample preparation is required, (3) 3D rendering is needed, or (4) compelling images of small, complex features are desired.

36 MATERIALS SCIENCE↗

Organosolv-Water Cosolvent Phase Separation on Cellulose and its Influence on the Physical Deconstruction of Cellulose: A Molecular Dynamics Analysis

Deconstruction of cellulose is crucial for the chemical conversion of lignocellulose into fuel/bioproduct precursors. Recently, a water-organosolv cosolvent system (THF-water) has been shown to both phase-separate on cellulose surfaces and partially deconstruct Avicel (cellulose) in the absence of acid. Here we employ molecular dynamics simulations to determine whether other common water-organosolv cosolvent systems (acetone, ethanol, and γ-valerolactone) exhibit phase separation at cellulose surface and whether this alters a purely physical cellulose dissociation pathway. Despite finding varied degrees of phase-separation of organosolv on cellulose surfaces, physical dissociation is not enhanced. Interestingly, however, the total amount the median water-cellulose contact lifetimes increases for the cosolvent systems in the order of THF > acetone > ethanol > γ-valerolactone. Together our results indicate two points: a purely physical process for deconstruction of cellulose is unlikely for these cosolvents, and in THF-water, unlike γ-valerolactone- (and some concentrations of acetone and ethanol) water cosolvents, a significant fraction of surface water is slowed. As a result, this slowing may be of importance in enhancing chemical deconstruction of cellulose, as it permits an increase in potential THF-water-cellulose reactions, even while the amount of water near cellulose is decreased.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aerosol Optical Tweezers Elucidate the Chemistry, Acidity, Phase Separations, and Morphology of Atmospheric Microdroplets

Aerosol particles represent unique chemical environments because of their high surface area-to-volume ratio that promotes the effects of interfacial chemistry in confined environments. Properties such as viscosity, diffusivity, water content, pH, and morphology—following liquid–liquid phase separation—can strongly alter how a particle interacts with condensable vapors and reactive trace gases, thus modifying its continual evolution and environmental effects. Our understanding of this chemical evolution of atmospheric particulate matter and its environmental impacts is largely limited by our ability to directly observe how these critical particle properties respond to the addition or reactive uptake of new chemical components. Aerosol optical tweezers (AOT) stably trap particles in focused laser beams, providing positional control and the retrieval of many of these critical properties required to understand and predict the chemistry of aerosolized microdroplets. The analytical power of the AOT stems from the retrieval of the cavity-enhanced Raman spectrum induced by the trapping laser. Analysis of the whispering gallery modes (WGMs) that resonate as a standing wave around the droplet’s interface, provide high accuracy measurements of the droplet’s size, refractive index (and thus a measurement of composition), and can distinguish between core–shell, partially engulfed, and homogeneous morphologies. In this study, we have advanced the ability to determine the properties of the core and shell phases in biphasic droplets, including obtaining high-accuracy pH measurements. These capabilities were applied to perform AOT physical chemistry experiments on authentic secondary organic aerosol (SOA) produced directly in the AOT chamber by ozonolysis of terpene vapors. The propensity of the SOA to phase separate as a shell from a wide range of nonpolar to polar core phases was observed, along with the discovery of a stable emulsified state of SOA particles in an aqueous salt droplet. Micron-thick SOA shells did not impede the gain or loss of water or squalane from the core to the surrounding air, indicating no significant diffusional limitations to condensational growth or partitioning even under dry conditions. These experiments formed the foundation of a new framework that predicts how the phase-separated morphology of complex aerosols containing organic carbon evolves during continual atmospheric oxidation processes. Increases in oxidation state will quickly drive conversion from a partially engulfed to core–shell morphology that has dramatically different chemical reactivity since the core phase is completely concealed by the shell. The recent advances in the experimental capabilities of the AOT technique such as presented here enable novel experimental methodologies that provide insights into the chemistry and multidimensional properties of aerosol microdroplets, and how these coevolve and respond to continual chemical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Morphological-evolution pathway during phase separation in polymer solutions with highly asymmetrical miscibility gap

Microstructural evolution during thermally induced phase separation in a polymer solution with a highly asymmetrical miscibility gap is analyzed using Flory-Huggins thermodynamics and nonlinear Cahn-Hilliard kinetics. Computer simulation results demonstrate that, in contrast to systems with symmetric miscibility gaps, interesting morphological-evolution pathways (MEPs) including cluster-to-percolation and percolation-to-cluster transitions are identified. These MEPs are rationalized according to asynchronous evolution of the two product phases. For a highly asymmetric polymer system, the initial solution composition is also found to play a critical role in determining the MEPs. According to the simulation results a map of MEPs in terms of initial solution composition and aging time of phase separation is established to guide future microstructural design in asymmetrical polymer solutions.

36 MATERIALS SCIENCE↗

Nanoscale Phase Separation and Large Refrigerant Capacity in Magnetocaloric Material LaFe 11.5 Si 1.5

Here, ferromagnetic transitions, the magnetocaloric effect, and the atomic-scale microstructure in an annealed bulk material of LaFe 11.5 Si 1.5 were investigated using magnetic measurements, Mössbauer spectroscopy, high-resolution X-ray diffraction analysis, and high-resolution transmission electron microscopy. The results provide evidence of the coexistence of two ferromagnetic phases with different Curie temperatures. The phase with a Curie temperature of 216 K corresponds to a Si-rich phase of a NaZn 13 -type structure with a small lattice volume, whereas the phase with a Curie temperature of 185 K corresponds to a Si-poor phase of a NaZn 13 -type structure with a large lattice volume. This phase coexistence is observed on a nanometer scale and it can account for inverse thermal hysteresis of the ferromagnetic transition in the Si-rich phase during warming. Furthermore, the phase coexistence helps the bulk material achieve a refrigeration capacity of 170 J kg -1 due to a combination of the magnetocaloric effect in each phase. It is determined that the magnetocaloric effect in the Si-rich and the Si-poor phase brings about a maximum of the total entropy change of -3.55 and -6.80 and J kg -1 K -1 at respective Curie temperatures, respectively. Fundamentally, the phase coexistence indicates coloring of Si atoms in the lattice of a NaZn 13 -type structure and can be attributed to nanoscale phase separation of a disordered precursor during annealing of the bulk material. The nanoscale phase separation may occur in other magnetocaloric materials, thus allowing for improvement of their refrigeration capacity.

36 MATERIALS SCIENCE↗