Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pinch effect.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Study of keV radiation properties of Mo and Ti X-pinch plasma sources using a pinhole transmission grating spectrometer

The properties of keV x-ray radiations from Mo and Ti X-pinch plasma sources at the current of 800 kA were investigated by a pinhole transmission grating spectrometer. The spectrometer was characterized by a high linear dispersion rate (2.9 A/mm), and from its time-integrated diffraction images, rich information about the X-pinch sources (e.g., source number, source size, and absolute spectra) could be obtained. Multiple hot spots were produced in all the Mo tests with loads made of two or four 25 mum wires with or without a shunt wire, and obvious increases both in the radiation intensity and in the source size around the spectral region of 2.6 keV were observed. In Ti X-pinch tests, a single keV x-ray burst with a source size of approx200 mum and a time duration of approx200 ps in full width at half maximum was obtained using a load made of two 50 mum wires plus a shunt wire. The intensity of x-rays decreased sharply from approx10{sup 11} photon eV{sup -1} sr{sup -1} at 1 keV to approx10{sup 8} photon eV{sup -1} sr{sup -1} at 4 keV. The energy-dependent source size in the band of 1-4 keV is less than 100 mum and seemed to shrink quickly as x-ray energy increases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Polycrystalline diamond based detector for Z-pinch plasma diagnosis

A detector setup based on polycrystalline chemical-vapor-deposition diamond film is developed with great characteristics: low dark current (lower than 60 pA within 3 V/{mu}m), fast pulsed response time (rise time: 2-3 ns), flat spectral response (3-5 keV), easy acquisition, low cost, and relative large sensitive area. The characterizing data on Qiangguang-I accelerator show that this detector can satisfy the practical requirements in Z-pinch plasma diagnosis very well, which offers a promising prototype for the x-ray detection in Z-pinch diagnosis.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Dynamics of vapor emissions at wire explosion threshold

X-pinch plasmas have been actively studied in the recent years. Numerical simulation of the ramp-up of metallic vapor emissions from wire specimens shows that under impulsive Ohmic heating the wire core invariably reaches a supercritical state before explosion. The heating rate depends sensitively on the local wire resistance, leading to highly variable vapor emission flux along the wire. To examine the vapor emission process, we have visualized nickel wire explosions by means of shock formation in air. In a single explosion as captured by shadowgraphy, there usually appear several shocks with spherical or cylindrical wave front originating from different parts of the wire. Growth of various shock fronts in time is well characterized by a power-law scaling in one form or another. Continuum emission spectra are obtained and calibrated to measure temperature near the explosion threshold. Shock front structures and vapor plume temperature are examined.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Impurity dynamics in the presence of transport barriers in tokamaks

Impurity transport in tokamak core plasmas is investigated with a three-dimensional global fluid code. The diffusion coefficient and the pinch velocity of impurity transport in tokamaks are studied using the fluid model for ion temperature gradient and trapped electron mode driven turbulence in tokamak plasmas. It is shown that in the presence of an internal transport barrier created by a reversed magnetic shear configuration or external ExB shear flow, a reversal of impurity pinch velocity is obtained, which changes from inward direction to outward direction. This scenario is favorable for expelling impurities from the central region and decontaminating the core plasma. The pinch reversal is attributed to a change of sign of the curvature pinch velocity. This modification is mostly due to the reversal of magnetic shear for the hollow q profile. When a strong ExB shear flow is externally imposed, it is rather due to a change of the turbulence mean phase velocity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spatially resolved high-resolution x-ray spectroscopy of high-current plasma-focus discharges

Soft x-ray emission from a Mather-type plasma-focus device (PF-1000) operated at {approx}400 kJ was measured. The high density and temperature plasma were generated by the discharge in the deuterium-argon gas mixture in the modified (high-current) plasma-focus configuration. A spherically bent mica crystal spectrograph viewing the axial output of the pinch region was used to measure the x-ray spectra. Spatially resolved spectra including the characteristic x-ray lines of highly ionized Ar and continua were recorded by means of an x-ray film. The x-ray emission of PF-1000 device was studied at different areas of the pinch.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Generation of episodic magnetically driven plasma jets in a radial foil Z-pinch

We present experimental results of the formation of magnetically driven plasma jets, showing for the first time a way of producing episodic jet/ouflows in the laboratory. The jets are produced using a 6.5 {mu}m thick aluminum disk (a radial foil), which is subjected to the 1 MA, 250 ns current pulse from the MAGPIE generator [I. H. Mitchell et al., Rev. Sci. Instrum. 67, 1533 (1996)]. The early time motion of the foil is characterized by the bulk motion of the mass due to the magnetic pressure, together with the formation of a surface plasma following the direction of the JxB force. A low density plasma fills the region above the foil preceding the formation of subsequent magnetically driven jets on the axis of expanding magnetic bubbles. The outflows emerge in timescales of {approx}30-40 ns and their episodic nature is the result of current reconnection in the foil, aided by the formation of current-driven instabilities in the jet and the distribution of mass available from the foil. The additional inductance due to the new current path inside the cavities was measured using an inductive probe, allowing to estimate the energy balance associated with the episodes. The measured temperature of the compressed jet resulted in T{sub e{approx}}300 eV and a magnetic Reynolds number of Re{sub M{approx}}200-1000, allowing the experiments to be in the regime relevant for scaled representations of astrophysical outflows.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hybrid X-pinch with conical electrodes

A hybrid X-pinch configuration consisting of solid conical electrodes connected by a wire has been tested on a 45 ns risetime, 500 kA peak current pulsed power generator. Wires of different materials were loaded through holes in the cones; wire lengths were varied from 0.6 to 2 mm. Most of these hybrid X-pinches generated an intense single burst of soft x-rays and developed a single hot spot that was of micron-scale size. Hybrid X-pinches generate less hard x-ray intensity than standard X-pinches.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Implosion dynamics in double planar wire array Z pinches

The double planar wire array (DPWA) Z pinch is a highly efficient radiation source with unique implosion dynamics and precursor formations. The inductively divided current successively ablates the wires and injects the material to the interior of the array. Three uniquely imploding DPWA load types were identified and classified according to the critical load parameter: low, intermediate, or high aspect ratio. Radiation pulse shaping was obtained from secondary precursors: off-axis mass carrying high current densities during the implosion phase. Time-gated EUV spectroscopy of off-axis mass accumulations is used to assess a 60 eV electron temperature prior to the implosion phase. These structures are shown to form by a different mechanism than the secondary precursors. High yields, compact size, and shaped radiation pulses merit further consideration of the DPWA as a candidate for inertial confinement fusion research.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Relaxation model for extended magnetohydrodynamics: Comparison to magnetohydrodynamics for dense Z-pinches

It is shown that the two-fluid model under a generalized Ohm's law formulation and the resistive magnetohydrodynamics (MHD) can both be described as relaxation systems. In the relaxation model, the under-resolved stiff source terms constrain the dynamics of a set of hyperbolic equations to give the correct asymptotic solution. When applied to the collisional two-fluid model, the relaxation of fast time scales associated with displacement current and finite electron mass allows for a natural transition from a system where Ohm's law determines the current density to a system where Ohm's law determines the electric field. This result is used to derive novel algorithms, which allow for multiscale simulation of low and high frequency extended-MHD physics. This relaxation formulation offers an efficient way to implicitly advance the Hall term and naturally simulate a plasma-vacuum interface without invoking phenomenological models. The relaxation model is implemented as an extended-MHD code, which is used to analyze pulsed power loads such as wire arrays and ablating foils. Two-dimensional simulations of pulsed power loads are compared for extended-MHD and MHD. For these simulations, it is also shown that the relaxation model properly recovers the resistive-MHD limit.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evaluation of Turner relaxed state as a model of long-lived ion-trapping structures in plasma focus and Z-pinches

Relatively long-lived spheroidal structures coincident with the neutron emission phase have been observed in frozen deuterium fiber Z-pinch and some plasma focus devices. Existence of energetic ion-trapping mechanism in plasma focus has also been inferred from experimental data. It has been conjectured that these are related phenomena. This paper applies Turner's theory [L. Turner, IEEE Trans. Plasma Sci. 14, 849 (1986)] of relaxation of a Hall magnetofluid to construct a model of these structures and ion-trapping mechanism. Turner's solution modified for a finite-length plasma is used to obtain expressions for the magnetic field, velocity, and equilibrium pressure fields and is shown to represent an entity which is simultaneously a fluid vortex, a force-free magnetic field, a confined finite-pressure plasma, a charged object, and a trapped energetic ion beam. Characteristic features expected from diagnostic experiments are evaluated and shown to resemble experimental observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurements of magneto-Rayleigh-Taylor instability growth during the implosion of initially solid metal liners

A recent publication [D. B. Sinars et al., Phys. Rev. Lett. 105, 185001 (2010)] describes the first controlled experiments measuring the growth of the magneto-Rayleigh-Taylor instability in fast ({approx}100 ns) Z-pinch plasmas formed from initially solid aluminum tubes (liners). Sinusoidal perturbations on the surface of these liners with wavelengths of 25-400 {mu}m were used to seed single-mode instabilities. The evolution of the outer liner surface was captured using multiframe 6.151 keV radiography. The initial paper shows that there is good agreement between the data and 2-D radiation magneto-hydrodynamic simulations down to 50 {mu}m wavelengths. This paper extends the previous one by providing more detailed radiography images, detailed target characterization data, a more accurate comparison to analytic models for the amplitude growth, the first data from a beryllium liner, and comparisons between the data and 3D simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

First-order finite-Larmor-radius effects on magnetic tearing in pinch configurations

The linear and nonlinear evolution of a single-helicity tearing mode in a cylindrical, force-free pinch are investigated using a fluid model with first-order finite-Larmor-radius corrections. Linear results computed with the nimrod[nonideal magnetohydrodynamics (MHD) with rotation, open discussion] code [Sovinec et al., J. Comput. Phys. 195, 355 (2004)] produce a regime at small {rho}{sub s} where the growth rate is reduced relative to resistive MHD, though the Hall term is not significant. The leading order contributions from ion gyroviscosity may be expressed as a drift associated with {nabla}B{sub 0} and poloidal curvature for experimentally relevant {beta}=0.1, S{approx}10{sup 5}-10{sup 6} force-free equilibria. The heuristic analytical dispersion relation, {gamma}{sup 4}({gamma}-i{omega}{sub *gv})={gamma}{sub MHD}{sup 5} where {omega}{sub *gv} is the gyroviscous drift frequency, confirms numerical results. The behavior of our cylindrical computations at large {rho}{sub s} corroborates previous analytic slab studies where an enhanced growth rate and radially localized Hall dynamo are predicted. Similar to previous drift-tearing results, nonlinear computations with cold ions demonstrate that the Hall dynamo is small when the island width is large in comparison with the scale for electron-ion coupling. The saturation is then determined by the resistive MHD physics. However, with warm ions the gyroviscous stress supplements the nonlinear Lorentz force, and the saturated island width is reduced.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical studies of ablated-plasma dynamics and precursor current of wire-array Z-pinches

The dynamics of ablated plasmas of wire-array Z-pinches are studied numerically in (r,{theta}) geometry by using the magnetohydrodynamic (MHD) simulation model in which the mass injection boundary conditions are presented, and two-dimensional spatio-temporal distributions of magnetic field and precursor current during the ablation phase are obtained. The ablated-plasma dynamics contains four processes: drifting toward the axis, arriving at the axis and forming the precursor column, and contraction and expansion of the precursor column. The relationship among the maximum inward velocity of ablated plasma streams and the initial wire array parameters is analyzed and it is found that this velocity is relatively sensitive to the change of inter-wire separation but weakly depends on the original array radius. The results are in reasonable agreement with the experiments on MAGPIE facility. The origin of the current flow in the precursor plasmas is analyzed from the point of view of the B-field convection in (r,{theta}) plane. The dynamics of ablation streams determine the distribution of magnetic field and the current density J{sub z} inside the wire array. The precursor current can be approximately calculated by the integral of J{sub z} inside the region of a radius near to the column. In this model, the fraction of precursor current is less than 10% of the total current, which is close to the experimental results. When the current waveform is fixed, the increase of the inter-wire gap or decrease of the initial radius will lead to the increase of the precursor current.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ion diode performance on a positive polarity inductive voltage adder with layered magnetically insulated transmission line flow

A pinch-reflex ion diode is fielded on the pulsed-power machine Mercury (R. J. Allen, et al., 15th IEEE Intl. Pulsed Power Conf., Monterey, CA, 2005, p. 339), which has an inductive voltage adder (IVA) architecture and a magnetically insulated transmission line (MITL). Mercury is operated in positive polarity resulting in layered MITL flow as emitted electrons are born at a different potential in each of the adder cavities. The usual method for estimating the voltage by measuring the bound current in the cathode and anode of the MITL is not accurate with layered flow, and the interaction of the MITL flow with a pinched-beam ion diode load has not been studied previously. Other methods for determining the diode voltage are applied, ion diode performance is experimentally characterized and evaluated, and circuit and particle-in-cell (PIC) simulations are performed. Results indicate that the ion diode couples efficiently to the machine operating at a diode voltage of about 3.5 MV and a total current of about 325 kA, with an ion current of about 70 kA of which about 60 kA is proton current. It is also found that the layered flow impedance of the MITL is about half the vacuum impedance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The pinch of cold ions from recycling in the tokamak edge pedestal

We apply the ''natural fueling mechanism'' [W. Wan, S. E. Parker, Y. Chen, and F. W. Perkins, Phys. Plasmas 17, 040701 (2010)] to the edge pedestal. The natural fueling mechanism is where cold ions naturally pinch radially inward for a heat-flux dominated plasma. It is shown from neoclassical-neutral transport coupled simulations that the recycling neutrals and the associated source ions are colder than the main ions in the edge pedestal. These recycling source ions will pinch radially inward due to microturbulence. Gyrokinetic turbulence simulations indicate that near the top of the pedestal, the pinch velocity of the recycling source ions is much higher than the main ion outgoing flow velocity. The turbulent pinch of the recycling source ions may play a role in the edge pedestal transport and dynamics. The cold ion temperature significantly enhances the pinch velocity of the recycling source ions near to the pedestal top. Neoclassical calculations show a cold ion pinch in the pedestal as well.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fluctuation driven transport and stationary profiles

Transport equations for particles and energy can be derived when the fluctuations conserve adiabatic invariants. The transport equations determine both stationary density and pressure profiles and the direction of the turbulence-driven fluxes which can be inward or outward. An inward turbulent pinch is predicted which creates stationary profiles and reverses direction depending on the density and temperature gradients. The transport fluxes are independent of the underlying drive that leads to plasma turbulence. For low frequency turbulence, the formulation remains correct when the collisional time scale is faster than the confinement time scale.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High resolution absorption spectroscopy of exploding wire plasmas using an x-pinch x-ray source and spherically bent crystal

We present here the use of absorption spectroscopy of the continuum radiation from x-pinch-produced point x-ray sources as a diagnostic to investigate the properties of aluminum plasmas created by pulsed power machines. This technique is being developed to determine the charge state, temperature, and density as a function of time and space under conditions that are inaccessible to x-ray emission spectroscopic diagnostics. The apparatus and its characterization are described, and the spectrometer dispersion, magnification, and resolution are calculated and compared with experimental results. Spectral resolution of about 5000 and spatial resolution of about 20 {mu}m are demonstrated. This spectral resolution is the highest available to date in an absorption experiment. The beneficial properties of the x-pinch x-ray source as the backlighter for this diagnostic are the small source size (<5 {mu}m), smooth continuum radiation, and short pulse duration (<0.1 ns). Results from a closely spaced (1 mm) exploding wire pair are shown and the general features are discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗