Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pinning effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Emergent flat band and topological Kondo semimetal driven by orbital-selective correlations

Flat electronic bands are expected to show proportionally enhanced electron correlations, which may generate a plethora of novel quantum phases and unusual low-energy excitations. They are increasingly being pursued in d-electron-based systems with crystalline lattices that feature destructive electronic interference, where they are often topological. Such flat bands, though, are generically located far away from the Fermi energy, which limits their capacity to partake in the low-energy physics. Here we show that electron correlations produce emergent flat bands that are pinned to the Fermi energy. We demonstrate this effect within a Hubbard model, in the regime described by Wannier orbitals where an effective Kondo description arises through orbital-selective Mott correlations. Moreover, the correlation effect cooperates with symmetry constraints to produce a topological Kondo semimetal. Our results motivate a novel design principle for Weyl Kondo semimetals in a new setting, viz.d-electron-based materials on suitable crystal lattices, and uncover interconnections among seemingly disparate systems that may inspire fresh understandings and realizations of correlated topological effects in quantum materials and beyond.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

NaRuO2: Kitaev-Heisenberg exchange in triangular-lattice setting

Abstract Kitaev exchange, a new paradigm in quantum magnetism research, occurs for 90° metal-ligand-metal links, $${t}_{2g}^{5}$$ t 2 g 5 transition ions, and sizable spin-orbit coupling. It is being studied in honeycomb compounds but also on triangular lattices. While for the former it is known by now that the Kitaev intersite couplings are ferromagnetic, for the latter the situation is unclear. Here we pin down the exchange mechanisms and determine the effective coupling constants in the $${t}_{2g}^{5}$$ t 2 g 5 triangular-lattice material NaRuO 2 , recently found to host a quantum spin liquid ground state. We show that, compared to honeycomb compounds, the characteristic triangular-lattice cation surroundings dramatically affect exchange paths and effective coupling parameters, changing the Kitaev interactions to antiferromagnetic. Quantum chemical analysis combined with subsequent effective spin model simulations provide perspective onto the nature of the experimentally observed quantum spin liquid—it seemingly implies fairly large antiferromagnetic second-neighbor isotropic exchange, and the atypical proximity to ferromagnetic order is related to ferromagnetic nearest-neighbor Heisenberg coupling.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Asymmetric crossing of the attractive and repulsive magnetic potential by Abrikosov vortices

Here, we present studies of Abrikosov vortex motion across the magnetically charged edges of long thin ferromagnetic stripes placed above or under a thin superconducting film. The magnetic charges at the stripe edges form attractive or repulsive potential wells for vortices. Using a relatively small in-plane magnetic field to polarize the stripe edges and normal-to-plane magnetic field to induce up or down polarized vortices, we tune the attractive or repulsive stripe-vortex interactions. Imaging of the vortex dynamics reveals that the repulsive magnetic potential U m + acts as a robust vortex pinning barrier, while the attractive U m - has practically no effect on the vortex motion irrespective of the position of the stripes located above or underneath the superconducting film. We analyze the observed asymmetry using equations of the overdamped vortex motion. The formal analytical solution yields an asymmetry, but the numerical modeling with and without noise terms does not confirm it. Instead, we find that the asymmetry is caused by the creation of spontaneous vortices at the maxima of U m , which depends on the edge polarity and suppress U m - . Furthermore, our experiment and time-dependent Ginzburg-Landau simulations demonstrate that magnetic pinning dominates over vortex pinning due to corrugations of the superconducting layer deposited on top of the ferromagnetic stripes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Possible role of grain-boundary and dislocation structure for the magnetic-flux trapping behavior of niobium: A first-principles study

In this work, first-principles methods were used to understand magnetic flux trapping at vacancies, dislocations, and grain boundaries in high-purity superconducting niobium. Full-potential linear augmented plane-wave methods were applied in progressively greater complexity, starting at simple vacancies and extending to screw dislocations and tilt grain boundaries to analyze the effects of magnetic field on the superconducting state surrounding these defects. Density-functional theory calculations identified changes in electronic structure at the dislocation core and different types of symmetric tilt grain boundaries relative to bulk niobium. Electron redistribution enhanced nonparamagnetic effects and thus perturb superconductivity, resulting in local conditions suitable for premature flux penetration and subsequently flux pinning. Since the coherence length of superconducting niobium at 0 K is significantly larger than the lattice parameter, the effects of line and planar defects in niobium are predicted to be stronger for defect clusters than single defects in isolation, which is consistent with recent experimental observations. Controlling accumulation or depletion of charge at the defects, e.g., by segregation of an impurity atom, can mitigate these tendencies thus increasing the quality of superconducting niobium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Spin canting and lattice symmetry in La 2 CuO 4

While the dominant magnetic interaction in La 2 CuO 4 is superexchange between nearest-neighbor Cu moments, the pinning of the spin direction depends on weak anisotropic effects associated with spin-orbit coupling. The symmetry of the octahedral tilt pattern allows an out-of-plane canting of the Cu spins, which is compensated by an opposite canting in nearest-neighbor layers. A strong magnetic field applied perpendicular to the planes can alter the spin canting pattern to induce a weak ferromagnetic phase. In light of recent evidence that the lattice symmetry is lower than originally assumed, we take another look at the nature of the field-induced spin-rotation transition. Comparing low-temperature neutron diffraction intensities for several magnetic Bragg peaks measured in fields of 0 and 14 T, we find that a better fit is provided by a model in which spins rotate within both neighboring planes but by different amounts, resulting in a noncollinear configuration. Finally, this model allows a more consistent relationship between lattice symmetry and spin orientation at all Cu sites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Analytic model of the remobilization of pinned glide dislocations: Including dislocation drag from phonon wind

Here, we discuss the effect of a non-constant dislocation drag coefficient on the very high strain rate regime within an analytic model describing mobile-immobile dislocation intersections applicable to fcc polycrystals. Based on previous work on dislocation drag, we estimate its temperature and pressure dependence and its effects on stress–strain rate relations. In the high temperature regime, we show that drag can remain the dominating effect even down to intermediate strain rates. We also discuss the consequences of having a limiting dislocation velocity, a feature which is typically predicted by analytic models of dislocation drag, but which is somewhat under debate because a number of MD simulations predict supersonic dislocations.

42 ENGINEERING↗
DOE OSTI2021

Vortex Ordering and Dynamics of Santa Fe Artificial Ice Pinning Arrays

We numerically examine the ordering, pinning, and flow of superconducting vortices interacting with a Santa Fe artificial ice pinning array. We find that as a function of magnetic field and pinning density, a wide variety of vortex states occur, including ice rule obeying states and labyrinthine patterns. In contrast to square pinning arrays, we find no sharp peaks in the critical current due to the inherent frustration effect imposed by the Santa Fe ice geometry; however, there are some smoothed peaks when the number of vortices matches the number of pinning sites. For some fillings, the Santa Fe array exhibits stronger pinning than the square array due to the suppression of one-dimensional flow channels when the vortex motion in the Santa Fe lattice occurs through the formation of both longitudinal and transverse flow channels.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Development of Additive Manufacturing for Ceramic Matrix Composite Vanes

This report discusses the development of additive manufacturing for polymer-derived ceramic materials to create novel cooled gas turbine airfoils made from ceramics. Gas turbine engines have extremely high temperatures in the hot section of the engine that exceed the melting point of nickel superalloy materials that the engine is made from. Advanced cooling technologies have been developed over decades for metallic parts. Ceramic materials have higher temperature capabilities than superalloys, but are difficult to shape in the complex designs used in modern turbines. Several thrusts were investigated during the project, including development of higher material strength resins, improvement of ultraviolet (UV) photopolymerization and post-processing techniques to increase survivability of ceramic parts, thermomechanical modeling of novel ceramic airfoil designs for higher cooling effectiveness, and experimental validation of the modeling and manufacturing in a turbine vane test facility at nondimensional conditions that are relevant to modern gas turbines. Some major findings of the work include a significant increase in ceramic survivability during pyrolysis (a high temperature process that converts the organic material to a ceramic) by adjusting the composition ratios of the resins, as well as a tolulene soak after printing to remove unreacted polymer material. Thermomechanical optimization of the internal cooling structure indicated that a high density pin fin array would enable an 80% increase in overall cooling effectiveness relative to a baseline geometry, which was later verified during experimental testing in a high speed linear cascade. Ceramic vanes were tested at Mach numbers of up to 0.9 which is relevant to modern gas turbines. High temperature capability of the ceramic vanes was not tested in this work.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Novel solid-infused durable nonwetting surfaces for sustained condensation heat transfer enhancement

Here, in this article, we report novel nonwetting solid-infused surfaces that are easily fabricated using industrially widely adopted methods such as chemical etching or electrodeposition and exhibit sustained dropwise condensation performance durably than superhydrophobic and lubricant-infused surfaces. Solid-infused surfaces demonstrate fourfold larger condensation heat transfer coefficient and 25% better condensation effectiveness when compared to superhydrophobic surface and conventional filmwise condensation. Although the condensation heat transfer coefficient of lubricant-infused surface initially matches that of solid-infused surface, it is shown through durability studies that the wettability characteristic that underpins the performance of lubricant-infused surfaces degrades quickly with time as the lubricant depletes and lubricant-infused surface transitions to superhydrophobic surface. Solid-infused surface, on the other hand, retains its steadfast superior dropwise condensation effectiveness in the long run, overcoming the challenges of droplet pinning, surface inundation, cloaking, and lubricant depletion that eventually deteriorate condensation on conventional nonwetting superhydrophobic and lubricant-infused surfaces.

42 ENGINEERING↗
DOE OSTI2020

Tunneling electroresistance effects in epitaxial complex oxides on silicon

Complex oxide-based ferroelectric tunnel junctions (FTJs) show excellent nonvolatile memory characteristics promising for emerging technology. However, integration of these epitaxially grown FTJs electrically with a silicon substrate remains challenging due to their incompatible lattice structures and poor electronic interfaces resulting from the direct synthesis techniques. Here, we present an epitaxial SrRuO 3 /PbZr 0.2 Ti 0.8 O 3 /SrRuO 3 FTJ integrated electrically with a doped silicon substrate after a layer transfer process. The tunnel currents of the FTJ on silicon show a large tunneling electroresistance (~1×10 5 %) effect, which is explained by a numerical FTJ model incorporating pinned dipoles at the interfaces. This proof of concept of the integration of functional oxide heterostructures with silicon opens a pathway to beyond-CMOS computing devices using unconventional materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Anisotropic Flow in Fixed-Target 208 Pb + 20 Ne Collisions as a Probe of Quark-Gluon Plasma

The System for Measuring Overlap with Gas (SMOG2) at the LHCb detector enables the study of fixed-target ion-ion collisions at relativistic energies ($\sqrt{𝑠_{NN}}$ ∼ 100 GeV in the center of mass). Here, with input from ab initio calculations of the structure of 16 O and 20 Ne , we compute 3+1⁢D hydrodynamic predictions for the anisotropic flow of Pb+Ne and Pb+O collisions to be tested with upcoming LHCb data. This will allow the detailed study of quark-gluon plasma formation as well as experimental tests of the predicted nuclear shapes. Elliptic flow (𝑣 2 ) in Pb + Ne collisions is greatly enhanced compared to the Pb + O baseline due to the shape of 20 Ne , which is deformed in a bowling-pin geometry. Owing to the large 208 Pb radius, this effect is seen in a broad centrality range, a unique feature of this collision configuration. Larger elliptic flow further enhances the quadrangular flow (𝑣 4 ) of Pb + Ne collisions via nonlinear coupling, and impacts the sign of the kurtosis of the elliptic flow vector distribution (𝑐 2 ⁡{4}). Exploiting the shape of 20 Ne proves thus an ideal method to investigate the formation of quark-gluon plasma in fixed-target experiments at LHCb, and demonstrates the power of System for Measuring Overlap with Gas as a tool to image nuclear ground states.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Skyrmion soliton motion on periodic substrates by atomistic and particle-based simulations

Abstract We compare the dynamical behavior of magnetic skyrmions interacting with square and triangular defect arrays just above commensuration using both atomistic and particle-based models. Under applied drives, the initial motion is a kink traveling through the pinned skyrmion lattice. For the square defect array, both models agree well and show a regime in which the soliton motion is locked along 45°. The atomistic model also produces locking of a soliton along 30°, which is absent in the particle-based model. For the triangular defect array, the atomistic model exhibits 30° soliton motion over a wide region of external current values. In contrast, the particle-based model gives 45° soliton motion over a small range of external driving force values. The difference arises because the nondeforming particle model facilitates meandering skyrmion orbits while the deformable atomistic model enables stronger skyrmion-skyrmion interactions that reduce the meandering. Our results indicate that soliton motion through pinned skyrmion lattices on a periodic substrate is a robust effect.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Experiments to Measure the Inversion Point of the Isothermal Reactivity Coefficient in a Water-Moderated Pin-Fueled Critical Assembly at Sandia [Slides]

Two experiment series are planned to measure temperature effects in the Sandia Critical Experiments. The first series (IER-304) will measure the critical size of a fuel rod configuration at several temperatures. The second series (IER-452) will measure the inversion temperature of the isothermal reactivity coefficient in the Sandia critical assembly. Each experiment in the second series will be preceded by one or more experiments in the first series. This presentation addresses the conceptual design of the inversion temperature experiments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Schematic for the CAEN backup Power-supply [Slides]

J158 in the schematic shown below is the physical power switch for the UDCM. You will see that we really only care about 3 pins on this physical switch, pins 1,2 and 6. we are going to splice between the switch and the board, meaning we are ‘effectively’ elevating this component to become part of our own module, and then have our module interface with the board. So when I say ‘Pin 1 Switch’ I am literally referring the Switch’s pin 1. Whereas when I say ‘Pin 1 Board’ I am talking about the part of the board that originally would have interfaced with pin 1 on the switch as shown in the lower left corner.

42 ENGINEERING↗
DOE OSTI2023

Domain wall motion across microstructural features in polycrystalline ferroelectric films

This paper describes the effect of microstructural features such as grain boundaries and triple points on the pinning of domain wall motion in perovskite Pb(Zr 0.52 Ti 0.48 )O 3 (PZT) films on polycrystalline SrRuO 3 /SrTiO 3 substrates. Here, spatial variability in the collective domain wall dynamics was assessed using non-linearity mapping via Band Excitation Piezoresponse Force Microscopy (BE-PFM). Collocating the non-linearity maps with triple point locations (as visualized by EBSD) allowed for exploration of the effects that local microstructure (e.g., grain boundary) have on domain wall motion. It was found that the extrinsic behavior varied with both the misorientation angle and the proximity to the grain boundary. The width of influence of individual grain boundaries on the motion of domain walls was a function of the character of the grain boundary; random grain boundaries exhibit deeper minima in α d /d 33,initial and larger widths of influence (up to 905 nm) compared to coincident site lattice (CSL) boundaries (up to 572 nm). Additionally, triple points containing larger numbers of random boundaries exhibited non-Rayleigh behavior to greater distances, suggesting that the triple point provides either a deep potential minimum or a region where domain wall motion is unfavorable.

36 MATERIALS SCIENCE↗
DOE OSTI2021

TRANSIENT THERMAL MODELING OF THE HIGH BURNUP DEMONSTRATION RESEARCH PROJECT CASK USING STAR-CCM+ AND COBRA-SFS

The Department of Energy in collaboration with the Electric Power Research Institute is in the process of conducting the High Burnup Demonstration Project. Where the objective is to characterize the performance of high-burnup fuel in long term storage. As part of this demonstration, a TN-32B dry storage cask was instrumented and loaded with spent nuclear fuel at North Anna Nuclear Generating Station in November 2017. The project cask provides a unique opportunity to gain information on spent fuel and cask performance from an in-service operational system. The cask was instrumented with thermocouples inside of the fuel assemblies, then loaded and dried using normal procedures. After the drying process a thermal soak period where the cask was left indoors was used to obtain steady temperatures for model comparison along with surface temperatures. This paper details thermal modeling validation work that was done to model both the steady state and transient cases. Two modeling tools were used to predict temperatures in the cask. The general purpose CFD and heat transfer code STAR-CCM+ was used with both a detailed pin-by-pin model was used along with a more efficient k-effective simplification. The other code is COBRA-SFS, a purpose-built detailed thermal modeling tool developed and maintained at PNNL. Results from all the modeling tools were compared blind to the test data. Each model utilized general design information and compared reasonably well to the blind steady state data using convection and surface temperature boundary conditions. Post-test adjustments were later made to better reflect the “as built” conditions of the cask. Based on lessons learned from the steady state analysis the vacuum drying process was modeled in both codes. Utilizing the measured loading conditions the transient models were able to compare very well with the measured data. Overall the project showed an ability to model spent fuel storage conditions very well and future work is planned to generalize the methodology used for vacuum drying.

Thermal Analysis, Spent Fuel, Dry Storage↗
DOE OSTI2024

Progress toward the development of a high-fidelity neutronic \model of MARVEL using Griffin

The Microreactor Applications Research Validation and Evaluation (MARVEL) is a 100 kWth microreactor envisioned to start operations at Idaho National Laboratory (INL) in early 2025. This paper is focused on the development of a high-fidelity neutronic model of the MARVEL reactor using Griffin. In particular, the step-by-step verification procedure against Serpent reference calculations is here reported. In this version of the paper, the comparison is only performed in terms of effective multiplication factor, root mean square percentage error (RMSPE) of the pin power, and maximum error for pin-wise power.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗