SEARCH · Search NASA

Results for “Placement Study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

All sources NASA NTRS DOE OSTI

NASA NTRS2000

Automatic Data Traffic Control on DSM Architecture

We study data traffic on distributed shared memory machines and conclude that data placement and grouping improve performance of scientific codes. We present several methods which user can employ to improve data traffic in his code. We report on implementation of a tool which detects the code fragments causing data congestions and advises user on improvements of data routing in these fragments. The capabilities of the tool include deduction of data alignment and affinity from the source code; detection of the code constructs having abnormally high cache or TLB misses; generation of data placement constructs. We demonstrate the capabilities of the tool on experiments with NAS parallel benchmarks and with a simple computational fluid dynamics application ARC3D.

Frumkin, Michael↗

NASA NTRS2012

Model of the Radio Frequency (RF) Excitation Response from Monopole and Dipole Antennas in a Large Scale Tank

Good antenna-mode coupling is needed for determining the amount of propellant in a tank through the method of radio frequency mass gauging (RFMG). The antenna configuration and position in a tank are important factors in coupling the antenna to the natural electromagnetic modes. In this study, different monopole and dipole antenna mounting configurations and positions were modeled and responses simulated in a full-scale tank model with the transient solver of CST Microwave Studio (CST Computer Simulation Technology of America, Inc.). The study was undertaken to qualitatively understand the effect of antenna design and placement within a tank on the resulting radio frequency (RF) tank spectrum.

Wilson, Jeffrey D.↗

NASA NTRS2023

Computational Aerothermal Modeling and Simulation of Hypersonic, Low-density Flows for the ADEPT Drag Modulated Aerocapture Mission

NASA Ames Entry Systems and Technology Division has been leading development and testing of the Adaptable, Deployable, Entry and Placement Technology (ADEPT). A teaming partnership with JPL has been established to study and develop a compelling application of the ADEPT mechanically deployable hypersonic decelerator as part of the Venus Drag Modulated Aerocapture (VDMA) JPL R&TD effort. The primary work of this activity is to develop a design tool for the ADEPT drag skirt (e.g. a CFD-anchored CBAERO model) that enables rapid estimation of aerothermal environments for a range of candidate trajectories. This capability will enable rapid feasibility trades and design assessments for early stage mission concept evaluation for ADEPT Drag Modulated Aerocapture applications. Results of using TPSizer provided an ADEPT carbon fabric design thickness of the required number of fabric layers needed for predicted aerothermal environments and still have sufficient fabric remaining for overall vehicle integrity. This resulted in aerothermal design closure of the ADEPT drag skirt. In addition, the similar methodology for Venus DMA was used to assess a similar DMA operation at Earth as part of a possible Technology Demonstration Mission (TDM) for ADEPT DMA. This analysis showed that there is a close similarity of design approaches for an Earth DMA TDM that would be applicable to Venus DMA mission designs.

Drag Modulated Aerocapture↗

NASA NTRS1987

Performance of a parallel algorithm for standard cell placement on the Intel Hypercube

A parallel simulated annealing algorithm for standard cell placement that is targeted to run on the Intel Hypercube is presented. A tree broadcasting strategy that is used extensively in our algorithm for updating cell locations in the parallel environment is presented. Studies on the performance of our algorithm on example industrial circuits show that it is faster and gives better final placement results than the uniprocessor simulated annealing algorithms.

Jones, Mark↗

NASA NTRS1976

Analytical and experimental studies of an optimum multisegment phased liner noise suppression concept

Results are presented from detailed analytical studies made to define methods for obtaining improved multisegment lining performance by taking advantage of relative placement of each lining segment. Properly phased liner segments reflect and spatially redistribute the incident acoustic energy and thus provide additional attenuation. A mathematical model was developed for rectangular ducts with uniform mean flow. Segmented acoustic fields were represented by duct eigenfunction expansions, and mode-matching was used to ensure continuity of the total field. Parametric studies were performed to identify attenuation mechanisms and define preliminary liner configurations. An optimization procedure was used to determine optimum liner impedance values for a given total lining length, Mach number, and incident modal distribution. Optimal segmented liners are presented and it is shown that, provided the sound source is well-defined and flow environment is known, conventional infinite duct optimum attenuation rates can be improved. To confirm these results, an experimental program was conducted in a laboratory test facility. The measured data are presented in the form of analytical-experimental correlations. Excellent agreement between theory and experiment verifies and substantiates the analytical prediction techniques. The results indicate that phased liners may be of immediate benefit in the development of improved aircraft exhaust duct noise suppressors.

Sawdy, D. T.↗

NASA NTRS2003

Miniature Inchworm Actuators Fabricated by Use of LIGA

Miniature inchworm actuators that would have relatively simple designs have been proposed for applications in which there are requirements for displacements of the order of microns or tens of microns and for the ability to hold their positions when electric power is not applied. The proposed actuators would be members of the class of microelectromechanical systems (MEMS), but would be designed and fabricated following an approach that is somewhat unusual for MEMS. Like other MEMS actuators, the proposed inchworm actuators could utilize thermoplastic, bimetallic, shape-memory-alloy, or piezoelectric actuation principles. The figure depicts a piezoelectric inchworm actuator according to the proposal. As in other inchworm actuators, linear motion of an extensible member would be achieved by lengthening and shortening the extensible member in synchronism with alternately clamping and releasing one and then the other end of the member. In this case, the moving member would be the middle one; the member would be piezoelectric and would be shortened by applying a voltage to it. The two outer members would also be piezoelectric; the release of the clamps on the upper or lower end would be achieved by applying a voltage to the electrodes on the upper or lower ends, respectively, of these members. Usually, MEMS actuators cannot be fabricated directly on the side walls of silicon wafers, yet the geometry of this actuator necessitates such fabrication. The solution, according to the proposal, would be to use the microfabrication technique known by the German acronym LIGA - "lithographie, galvanoformung, abformung," which means lithography, electroforming, molding. LIGA involves x-ray lithography of a polymer film followed by selective removal of material to form a three-dimensional pattern from which a mold is made. Among the advantages of LIGA for this purpose are that it is applicable to a broad range of materials, can be used to implement a variety of designs, including those of structures >1 mm high, affords submicron precision, and is amenable to mass production at relatively low unit cost. Fabrication of the proposed actuators would involve some technological risks - in particular, in the integration of electrode connection lines and placement of actuator elements. It will also be necessary to perform an intensive study of the feasibility of growing piezoelectric crystals onto LIGA molds.

Yang, Eui-Hyeok↗

NASA NTRS2014

ISAAC Advanced Composites Research Testbed

The NASA Langley Research Center is acquiring a state-of-art composites fabrication capability to support the Center's advanced research and technology mission. The system introduced in this paper is named ISAAC (Integrated Structural Assembly of Advanced Composites). The initial operational capability of ISAAC is automated fiber placement, built around a commercial system from Electroimpact, Inc. that consists of a multi-degree of freedom robot platform, a tool changer mechanism, and a purpose-built fiber placement end effector. Examples are presented of the advanced materials, structures, structural concepts, fabrication processes and technology development that may be enabled using the ISAAC system. The fiber placement end effector may be used directly or with appropriate modifications for these studies, or other end effectors with different capabilities may either be bought or developed with NASA's partners in industry and academia.

Wu, K. Chauncey↗

NASA NTRS2019

Human Mars Entry, Descent and Landing Architecture Study: Deployable Decelerators

NASA’s Entry, Descent and Landing Architecture Study uses a trajectory simulation framework to evaluate various technologies and concepts of operations for human scale EDL at Mars. The study results inform agency technology investments. This paper summarizes the design assumptions and analysis of two deployable entry concepts performed in Phase 2 of the study. The entry concepts include a rigid deployable called the Adaptable Deployable Entry Placement Technology and an inflatable concept called the Hypersonic Inflatable Aerodynamic Decelerator. This paper describes the concept operations of these vehicles to deliver a 20-metric ton payload to the surface of Mars. Details of vehicle design and flight performance are summarized along with results of analysis on the aft body heating and its effect on the payload. Finally, recommended technology investments based on the results are presented.

Dwyer Cianciolo, Alicia↗

NASA NTRS2007

Lunar Lander Structural Design Studies at NASA Langley

The National Aeronautics and Space Administration is currently developing mission architectures, vehicle concepts and flight hardware to support the planned human return to the Moon. During Phase II of the 2006 Lunar Lander Preparatory Study, a team from the Langley Research Center was tasked with developing and refining two proposed Lander concepts. The Descent-Assisted, Split Habitat Lander concept uses a disposable braking stage to perform the lunar orbit insertion maneuver and most of the descent from lunar orbit to the surface. The second concept, the Cargo Star Horizontal Lander, carries ascent loads along its longitudinal axis, and is then rotated in flight so that its main engines (mounted perpendicular to the vehicle longitudinal axis) are correctly oriented for lunar orbit insertion and a horizontal landing. Both Landers have separate crew transport volumes and habitats for surface operations, and allow placement of large cargo elements very close to the lunar surface. As part of this study, lightweight, efficient structural configurations for these spacecraft were proposed and evaluated. Vehicle structural configurations were first developed, and preliminary structural sizing was then performed using finite element-based methods. Results of selected structural design and trade studies performed during this activity are presented and discussed.

Wu, K. Chauncey↗

NASA NTRSDate not supplied

Noise Scattering Study for a NACA 0012 Airfoil with a Shielding Flap

Noise scattering measurements for a NACA 0012 airfoil with a flap were conducted. The effects of the flap relative placement and geometry on noise shielding are examined. This scattering test supports the development of a noise reduction concept (referred as the Shielding Flap) applicable to a NATO MULDICON vehicle. Together with the NASA PAASc scattering prediction method, the experimental study presented here was used for the initial exploration and development of the Shielding Flap concept.

noise shielding↗

NASA NTRSDate not supplied

Noise Scattering Study for a NACA 0012 Airfoil with a Shielding Flap

acoustic↗

NASA NTRS2004

The Super Lightweight Interchangeable Carrier (SLIC) Project

The Super Lightweight Interchangeable Carrier (SLIC) Grant consists of two separate but related phases. The first phase of this grant was conducted under a separate Institute for Scientific Research, Inc. (ISR) subcontract to FMW Composite Systems, Inc., of Bridgeport, West Virginia. FMW conducted early design and engineering associated with the future development of a stronger and lighter Space Shuttle carrier pallet. This improved pallet is intended to support the next and last planned Shuttle servicing mission for the on-orbit Hubble Space Telescope (HST). The salient characteristics of this carrier are increased performance, together with significantly reduced mass. As the next servicing mission is the last planned upgrade mission for the HST, this lighter and stronger pallet will enable greater payload delivery to the HST, potentially increasing the servicing mission effectiveness and science lifetime of the telescope. The second phase of this grant, conducted by ISR, consisted of a data systems study to exploit further the potential of the HST servicing pallet for other space missions, specifically for application of semi-permanent placement of science payloads on the International Space Station (ISS). As in the case of the HST, a lightweight and more rigid pallet could be employed to increase science return for the ISS. A data systems study intended to complement the current ISS s Institutional data system holds the potential of increasing the science return for data efficiency, just as the lightweight pallet serves to increase payload mass efficiency.

Source record↗

NASA NTRS1985

Swirling flows in typical combustor geometries

The results of experimental attempts and subsequent computational efforts targeted at improving numerical models for swirling recirculating confined turbulent combustion flows are reported. Attention was focused on the mean flow patterns, scales and shapes of the recirculation zones, mapping the flowfield time-mean velocity, normal and Re shear stresses, and producing a predictive computer code based on the TEACH-T program. The work was performed mainly by graduate students. The studies covered swirl strengths, swirler performance, the effects of downstream contraction nozzle size and placement, expansion ratios, and inlet side-wall angles. The STARPIC program was developed in FORTRAN 4 for computing air flow through expansions and over a wide range of inlet swirl vane angles.

Lilley, D. G.↗

NASA NTRS1987

A computational study of thrust augmenting ejectors based on a viscous-inviscid approach

A viscous-inviscid interaction technique is advocated as both an efficient and accurate means of predicting the performance of two-dimensional thrust augmenting ejectors. The flow field is subdivided into a viscous region that contains the turbulent jet and an inviscid region that contains the ambient fluid drawn into the device. The inviscid region is computed with a higher-order panel method, while an integral method is used for the description of the viscous part. The strong viscous-inviscid interaction present within the ejector is simulated in an iterative process where the two regions influence each other en route to a converged solution. The model is applied to a variety of parametric and optimization studies involving ejectors having either one or two primary jets. The effects of nozzle placement, inlet and diffuser shape, free stream speed, and ejector length are investigated. The inlet shape for single jet ejectors is optimized for various free stream speeds and Reynolds numbers. Optimal nozzle tilt and location are identified for various dual-ejector configurations.

Lund, Thomas S.↗

NASA NTRS1994

Effects of noise variance model on optimal feedback design and actuator placement

In optimal placement of actuators for stochastic systems, it is commonly assumed that the actuator noise variances are not related to the feedback matrix and the actuator locations. In this paper, we will discuss the limitation of that assumption and develop a more practical noise variance model. Various properties associated with optimal actuator placement under the assumption of this noise variance model are discovered through the analytical study of a second order system.

Ruan, Mifang↗

NASA NTRS2016

Inlet Trade Study for a Low-Boom Aircraft Demonstrator

Propulsion integration for low-boom supersonic aircraft requires careful inlet selection, placement, and tailoring to achieve acceptable propulsive and aerodynamic performance, without compromising vehicle sonic boom loudness levels. In this investigation, an inward-turning streamline-traced and axisymmetric spike inlet are designed and independently installed on a conceptual low-boom supersonic demonstrator aircraft. The airframe was pre-shaped to achieve a target ground under-track loudness of 76.4 PLdB at cruise using an adjoint-based design optimization process. Aircraft and inlet performance characteristics were obtained by solution of the steady-state Reynolds-averaged Navier-Stokes equations. Isolated cruise inlet performance including total pressure recovery and distortion were computed and compared against installed inlet performance metrics. Evaluation of vehicle near-field pressure signatures, along with under- and off-track propagated loudness levels is also reported. Results indicate the integrated axisymmetric spike design offers higher inlet pressure recovery, lower fan distortion, and reduced sonic boom. The vehicle with streamline-traced inlet exhibits lower external wave drag, which translates to a higher lift-to-drag ratio and increased range capability.

engine airframe integration↗

NASA NTRS1990

Traffic placement policies for a multi-band network

Recently protocols were introduced that enable the integration of synchronous traffic (voice or video) and asynchronous traffic (data) and extend the size of local area networks without loss in speed or capacity. One of these is DRAMA, a multiband protocol based on broadband technology. It provides dynamic allocation of bandwidth among clusters of nodes in the total network. A number of traffic placement policies for such networks are proposed and evaluated. Metrics used for performance evaluation include average network access delay, degree of fairness of access among the nodes, and network throughput. The feasibility of the DRAMA protocol is established through simulation studies. DRAMA provides effective integration of synchronous and asychronous traffic due to its ability to separate traffic types. Under the suggested traffic placement policies, the DRAMA protocol is shown to handle diverse loads, mixes of traffic types, and numbers of nodes, as well as modifications to the network structure and momentary traffic overloads.

Maly, Kurt J.↗

NASA NTRS2020

Parametric Cost Estimates of Four 20 Ton Payload Mars EDL Vehicle Concepts

Cost is one of the biggest obstacles to sending humans to Mars. Many studies have examined various vehicles and/or technologies which could be used to send humans to Mars. However, nearly all of these studies have either ignored cost or have used the mass of the vehicles as a surrogate for cost. This work presents parametric cost estimates of four Mars Entry, Descent, and Landing vehicle concepts capable of landing 20 tons of payload on the surface of Mars. The concepts are the Co-Optimization Blunt-body Re-entry Analysis-Mid lift to drag ratio Rigid Vehicle (Cobra–MRV), Adaptive Deployable Entry and Placement Technology (ADEPT), Hypersonic Inflatable Aerodynamic Decelerator (HIAD), and Capsule concepts. Two variants of the HIAD concept are studied, one with a single HIAD heatshield and one with two HIADs. The study presents the development and production cost of each vehicle and the total cost to build five flight units and fifteen flight units. Five flight units is representative of a single mission, or a "Flags and Footprints" style campaign, whereas fifteen flight units is representative of multiple missions going to multiple sites on Mars. All costs presented in this work are normalized to the average of the first unit production cost of the lander concepts. There is a large amount of uncertainty both in the design of the vehicles and the cost of the vehicles and it is impossible to claim with certainty which vehicle will cost the least. However, it is likely that the total cost to produce five flight units will be in the following ranking from least costly to most costly, Single HIAD, Capsule, Dual HIAD, Cobra, ADEPT. The ranking for fifteen units is similar but with the positions of the Dual HIAD and Cobra reversed. This study only considers the cost of the entry vehicle and does not take into account the effect of the entry vehicle’s mass on the cost of the in-space propulsion stage or launch vehicle.

Paul D Friz↗