Search NASA⌕ Search

SEARCH · Search NASA

Results for “Poisson ratio”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

AGC-4 Specimen Post-Irradiation Examination Data Interim Report

This interim report documents preliminary results of the post-irradiation examination material property testing from the fourth advanced graphite creep (AGC), AGC 4, capsule specimens. This is the fourth of a series of six irradiation test trains planned as part of the AGC experiment to fully characterize the neutron irradiation effects and radiation creep behavior of current nuclear graphite grades to moderate dose levels (=7 dpa). The AGC 4 capsule was irradiated in the Idaho National Laboratory Advanced Test Reactor at a nominal temperature of 800°C and to a peak dose of 8 dpa. Half of the AGC-4 specimens were subjected to compressive stresses to induce irradiation creep. Post-irradiation testing and measurement results are reported with the exception of thermal testing, which is still in progress, and irradiation mechanical strength testing. Additionally, some specimens initially deemed too hot to be examined in the ART Graphite laboratory may still be measured. The data reported includes specimen dimensions for both stressed and unstressed specimens to establish the irradiation creep rates, mass and dimensional data necessary to derive density, elastic constants (Young?s modulus, shear modulus, and Poisson?s ratio) from ultrasonic time of flight velocity measurements, Young?s modulus from the fundamental frequency of vibration, and electrical resistivity. A more complete evaluation of trends in the material property changes, as well as irradiation-induced creep due to the irradiation environment and applied load on the specimens, will be discussed later in AGC 4 post-irradiation examination analysis reports.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Penta-SiCN: A Highly Auxetic Monolayer

We report the negative Poisson’s (NPR) ratio in a two-dimensional (2D) material is a counterintuitive mechanical property that facilitates the development of nanoscale devices with sophisticated functionality. Inspired by the peculiar buckled lower-symmetric, trilayered geometry of pentagonal monolayers, we theoretically predict penta-SiCN, a ternary auxetic metallic monolayer with highly tunable NPR. The penta-SiCN is structurally, thermally, dynamically, and mechanically stable, and sustainable at and beyond room temperature with experimental feasibility. It possesses nontrivial geometrical and mechanical isotropy and relatively moderate thickness. Remarkably, the shorter and quasi sp3-hybridized C–N bond and the rigidity against the strain allow the monolayer to possess a high value of NPR (-0.136), even higher than that of black phosphorene, extendable up to -0.639 by 4% of biaxial stretching. On the other hand, the 2D Young’s modulus of 129.88 N/m decreases to 41.34 N/m at equivalent stretching, indicating relative softening and flexibility. Interestingly, a buckled-to-planar phase transition is identified at 10% biaxial strain before it suffers the fracture at 16%. Additionally, the strong optical anisotropy, absorbance (up to 6.51 x 105 cm -1 ), and presence of plasmon frequency demonstrate its potential application in optomechanical and plasmonics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Planar, longitudinal, compressive waves in solids: Thermodynamics and uniaxial strain restrictions

A new tri-axial pressure-based constitutive expression has been found using Cauchy's stress tensor. This stress state emphasizes pressure and shear stress. The description is a pressure plus an effective shear stress allowing for a constitutive law based on atomic solid-state phase changes in crystalline cells due to pressure plus shear-based dislocation motion commonly associated with plasticity. Pressure has a new role in the material's constitutive response as it is separated from plasticity. The thermo-mechanical system describes third-order Gibbs’ expressions without specific volume restrictions placed upon the material. Isothermally, the ratio of heat to shear work in elastic copper is shown to approach zero at a very low temperature and become larger than one as temperature approaches melting. Wave compression models investigated are elastic and plastic: in fully elastic materials, the planar wave is restricted by Poisson's effect although plastic shear changes this constraint. Plastic deformation, dominated by dissipative shear stresses in uniaxial strain, heats the material while excluding phase changes from hydrostatic pressures. The material properties per se across Hugoniot shocks are described with entropy concepts. Shock waves are exceedingly complex since the constitutive laws are linked at extreme temperatures, pressures, and shear stresses. Isothermal, isentropic, isochoric, and iso-shear conditions are used throughout with Jacobian algebra.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Multiplicity and net-electric charge fluctuations in central Ar+Sc interactions at 13 A , 19 A , 30 A , 40 A , 75 A , and 150 A GeV/c beam momenta measured by NA61/SHINE at the CERN SPS

This paper presents results on multiplicity fluctuations of positively and negatively charged hadrons as well as net-electric charge fluctuations measured in central Ar+Sc interactions at beam momenta 13 A , 19 A , 30 A , 40 A , 75 A , and 150 A GeV/c. The fluctuation analysis is one of the tools to search for the predicted critical point of strongly interacting matter. Results are corrected for the experimental biases and quantified using cumulant ratios. In most instances, multiplicity and net-charge distributions appear narrower than the corresponding Poisson or Skellam distributions. Cumulant ratios are compared with the EPOS1.99 model predictions, which provide a qualitative description that aligns with observations for positively and negatively charged particles. The obtained results are also compared to earlier NA61/SHINE results from inelastic p+p interactions in the same analysis acceptance.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Measurements of elastoresistance under pressure by combining in-situ tunable quasi-uniaxial stress with hydrostatic pressure

Uniaxial stress, as well as hydrostatic pressure are often used to tune material properties in condensed matter physics. Here, we present a setup which allows for the study of the combined effects of quasi-uniaxial stress and hydrostatic pressure. Following earlier designs for measurements under finite stress at ambient pressure (e.g., Chu et al., Science 337, 710 (2012)), the present setup utilizes a piezoelectric actuator to change stress in situ inside the piston-cylinder pressure cell. We show that the actuator can be operated over the full temperature (from 30 K up to 260 K) and pressure range (up to ≈ 2 GPa), resulting in a clear and measurable quasi-uniaxial strain. To demonstrate functionality, measurements of the elastoresistance (i.e., the change of resistance of a sample as a response to quasi-uniaxial strain) under finite hydrostatic pressure on the iron-based compound BaFe 2 As 2 are presented as a proof-of-principle example, and discussed in the framework of electronic nematicity. Overall, this work introduces the combination of in situ tunable quasi-uniaxial stress and large (up to ≈ 2 GPa) hydrostatic pressure as a powerful combination in the study of novel electronic phases. In addition, it also points towards further technical advancements which can be made in the future.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Shock-induced transformation of nitinol shape memory alloy: Effect of stress state on transformation

Due to its numerous practical applications and intriguing phase transformation behavior, shape memory alloys (SMAs) have garnered significant research and development interests. In the past, most studies on the mechanical behavior of SMAs have been conducted under uniaxial stress loadings. Limited research on SMAs under shock loading has not provided conclusive results regarding their transformation behavior and transformation stress under such loading. Additionally, there is a lack of comprehensive understanding regarding the effects of different stress states on transformation behavior. The main objectives of this study are to address these issues. To achieve these objectives, a series of shock wave experiments were designed and conducted. Additionally, quasi-static and dynamic uniaxial stress experiments were carried out to establish a baseline for comparison. The results revealed that the transformation stress under dynamic uniaxial strain shock loading was approximately 1.92 GPa in contrast to 0.5 GPa (quasi-static) to 0.8 GPa (dynamic) observed in uniaxial stress loading. The transformation behavior exhibited noticeable rate sensitivity for both types of loading. There appeared to be a critical strain rate above which the austenite phase was driven to a metastable state. This estimated critical axial strain rate along the loading direction was approximately 2 × 10 3 /s–4 × 10 3 /s for uniaxial stress loading and approximately 2 × 10 6 /s for uniaxial strain loading. The apparent high transformation stress for uniaxial strain loading can likely be attributed to a combination of high-pressure confinement and high strain rate. Furthermore, determining their relative contributions remains an open issue.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Effects of irradiation damage on the hardness and elastic properties of quaternary and high entropy transition metal diborides

Multi-principal component transition metal (TM) diborides represent a class of high-entropy ceramics (HECs) that have received considerable interest in recent years owing to their promising properties for extreme environment applications that include thermal/ environmental barriers, hypersonic vehicles, turbine engines, and next-generation nuclear reactors. While the addition of chemical disorder through the random distribution of TM elements on the cation sublattice has offered opportunities to tailor elastic stiffness and hardness, the effects of irradiation-induced structural damage on the physical properties of these complex materials have remained largely unexplored. To this end, changes in the hardness and elastic moduli of a high-entropy TM diboride (Hf 0.2 Nb 0.2 Ta 0.2 Ti 0.2 Zr 0.2 )B 2 and three of its quaternary subsets following irradiation with 10 MeV gold (Au) ions to fluences of up to 6 × 10 15 Au cm -2 are investigated at the micrometer and sub-micrometer length-scales via the dispersion of laser-generated surface acoustic waves (SAW) and nanoindentation, respectively. The nanoindentation measurements show that the TM diborides exhibit an initial increase in hardness following irradiation with energetic Au ions, with a subsequent decrease in hardness following further irradiation. One quaternary composition, (Hf 1/3 Ta 1/3 Ti 1/3 )B 2 , exhibits a notable exception to the trend and continues to exhibit an increase in hardness with ion irradiation fluence. Although differences in the absolute values of the effective elastic moduli obtained from the measured SAW dispersion and nanoindentation are observed (and attributed to microstructural variations at the measurement length-scale), both techniques yield similar trends in the form of an initial reduction and subsequent saturation in the elastic modulus with increasing ion irradiation fluence. The quaternary TM diboride (Hf 1/3 Ta 1/3 Ti 1/3 )B 2 again exhibits a departure from this trend. The high-entropy TM diboride (Hf 0.2 Nb 0.2 Ta 0.2 Ti 0.2 Zr 0.2 )B 2 exhibits the greatest recovery in hardness and modulus when irradiated to high ion fluences following initial changes at low fluence, indicating superior resistance to radiation-induced damage over its quaternary counterparts. Opportunities for designing HECs with superior hardness and modulus for enhanced radiation resistance (compared to their single constituent counterparts) by tailoring chemical disorder and bond character in the lattice are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Directed aging, memory, and nature’s greed

Disordered materials are often out of equilibrium and evolve very slowly in a rugged and tortuous energy landscape. This slow evolution, referred to as aging, is deemed undesirable as it often leads to material degradation. However, we show that aging also encodes a memory of the stresses imposed during preparation. Because of inhomogeneous local stresses, the material itself decides how to evolve by modifying stressed regions differently from those under less stress. Because material evolution occurs in response to stresses, aging can be “directed” to produce sought-after responses and unusual functionalities that do not inherently exist. Aging obeys a natural “greedy algorithm” as, at each instant, the material simply follows the path of most rapid and accessible relaxation. Our experiments and simulations illustrate directed aging in examples in which the material’s elasticity transforms as desired because of an imposed deformation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Associations between cumulative environmental quality and ten selected birth defects in Texas

Abstract Background Causes of most birth defects are largely unknown. Genetics, maternal factors (e.g., age, smoking) and environmental exposures have all been linked to some birth defects, including neural tube, oral cleft, limb reduction, and gastroschisis; however, the contribution of cumulative exposures across several environmental domains in association with these defects is not well understood. Methods The Environmental Quality Index (EQI) and its domains (air, water, land, sociodemographic, built) were used to estimate county‐level cumulative environmental exposures from 2006–2010 and matched to birth defects identified from Texas Birth Defects Registry and live birth records from births in years 2007–2010 ( N = 1,610,709). Poisson regression models estimated prevalence ratios (PR) and 95% confidence intervals (CI) for associations between 10 birth defects and the EQI. Results We observed some positive associations between worst environmental quality and neural tube, anencephaly, spina bifida, oral cleft, cleft palate, cleft lip with and without cleft palate, and gastroschisis [PR range: 1.12–1.55], but near null associations with limb reduction defects. Among domain specific results, we observed the strongest positive associations with the sociodemographic domain across birth defects but varied positive associations among the air and water domains, and negative or null associations with the land and built domains. Overall, few exposure‐response patterns were evident. Conclusions Our results highlight the complexities of cumulative, simultaneous environmental exposures in the prevalence rates of 10 selected birth defects. We were able to explore the impact of overall and domain specific environmental quality on birth defects and identify potential domain specific drivers of these associations.

Krajewski, Alison K.↗
DOE OSTI2022

Accelerated steady-state electrostatic particle-in-cell simulation of Langmuir probes

First-principles particle-in-cell (PIC) simulation is a powerful tool for understanding plasma behavior, but this power often comes at great computational expense. Artificially reducing the ion/electron mass ratio is a time-honored practice to reduce simulation costs. Usually, this is a severe approximation. However, for steady-state collisionless, electrostatic (Vlasov–Poisson) systems, the solution with reduced mass ratio can be scaled to the solution for the real mass ratio, with no approximation. This “scaled mass” method, which works with already-existing PIC codes, can reduce the computation time for a large class of electrostatic PIC simulations by the square root of the mass ratio. The particle distributions of the resulting steady state must be trivially rescaled to yield the true distributions, but the self-consistent electrostatic field is independent of the mass ratio. This method is equivalent to “numerical timestepping,” an approach that evolves electron and ion populations with different time steps. Numerical timestepping can be viewed as a special case of the speed-limited PIC (SLPIC) method, which is not restricted to steady-state phenomena. Although the scaled-mass approach is simplest, numerical timestepping and SLPIC more easily generalize to include other effects, such as collisions. The equivalence of these new approaches is demonstrated by applying them to simulate a cylindrical Langmuir probe in electron–argon plasma, speeding up simulation by two orders of magnitude. Methods such as SLPIC can therefore play an invaluable role in interpreting probe measurements by including geometric effects, collisions, secondary emission, and non-Maxwellian distributions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Risk Ratio and Risk Difference Estimation in Case-cohort Studies

Background: In case-cohort studies with binary outcomes, ordinary logistic regression analyses have been widely used because of their computational simplicity. However, the resultant odds ratio estimates cannot be interpreted as relative risk measures unless the event rate is low. The risk ratio and risk difference are more favorable outcome measures that are directly interpreted as effect measures without the rare disease assumption. Methods: We provide pseudo-Poisson and pseudo-normal linear regression methods for estimating risk ratios and risk differences in analyses of case-cohort studies. These multivariate regression models are fitted by weighting the inverses of sampling probabilities. Also, the precisions of the risk ratio and risk difference estimators can be improved using auxiliary variable information, specifically by adapting the calibrated or estimated weights, which are readily measured on all samples from the whole cohort. Finally, we provide computational code in R (R Foundation for Statistical Computing, Vienna, Austria) that can easily perform these methods. Results: Through numerical analyses of artificially simulated data and the National Wilms Tumor Study data, accurate risk ratio and risk difference estimates were obtained using the pseudo-Poisson and pseudo-normal linear regression methods. Also, using the auxiliary variable information from the whole cohort, precisions of these estimators were markedly improved. Conclusion: The ordinary logistic regression analyses may provide uninterpretable effect measure estimates, and the risk ratio and risk difference estimation methods are effective alternative approaches for case-cohort studies. These methods are especially recommended under situations in which the event rate is not low.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Strategies for on-chip digital data compression for X-ray pixel detectors

Here, the continued desire for X-ray pixel detectors with higher frame rates will stress the ability of application-specific integrated circuit (ASIC) designers to provide sufficient off-chip bandwidth to reach continuous frame rates in the 1 MHz regime. To move from the current 10 kHz to the 1 MHz frame rate regime, ASIC designers will continue to pack as many power-hungry high-speed transceivers at the periphery of the ASIC as possible. In this paper, however, we present new strategies to make the most efficient use of the off-chip bandwidth by utilizing data compression schemes for X-ray photon-counting and charge-integrating pixel detectors. In particular, we describe a novel in-pixel compression scheme that converts from analog to digital converter units to encoded photon counts near the photon Poisson noise level and achieves a compression ratio of >1.5x independent of the dataset. In addition, we describe a simple yet efficient zero-suppression compression scheme called "zeromask" (ZM) located at the ASIC's edge before streaming data off the ASIC chip. ZM achieves average compression ratios of >4x, >7x, and >8x for high-energy X-ray diffraction, ptychography, and X-ray photon correlation spectroscopy datasets, respectively. We present the conceptual designs, register-transfer level block diagrams, and the physical ASIC implementation of these compression schemes in 65 nm CMOS. When combined, these two digital compression schemes could increase the effective off-chip bandwidth by a factor of 6-12x.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Hip Abductor Strength Asymmetry: Relationship to Upper Extremity Injury in Professional Baseball Players

Background: Hip strength is an important factor for control of the lumbo-pelvic-hip complex. Deficits in hip strength may affect throwing performance and contribute to upper extremity injuries. Hypothesis: Deficits in hip abduction isometric strength would be greater in those who sustained an upper extremity injury and hip strength would predict injury incidence. Study Design: Prospective cohort study. Level of Evidence: Level 3. Methods: Minor League baseball players (n = 188, age = 21.5 ± 2.2 years; n = 98 pitchers; n = 90 position players) volunteered. Hip abduction isometric strength was assessed bilaterally with a handheld dynamometer in side-lying position, expressed as torque using leg length (N·m). Hip abduction strength asymmetry was represented by [(trail leg/lead leg) × 100]. Overuse or nontraumatic throwing arm injuries were prospectively tracked. Poisson regression models were used to estimate relative risk ratios associated with hip asymmetry; confounders, including history of prior overuse injury in the past year, were included. Results: Hip abduction asymmetry ranged from 0.05% to 57.5%. During the first 2 months of the season, 18 players (n = 12 pitchers) sustained an upper extremity injury. In pitchers, for every 5% increase in hip abduction asymmetry, there was a 1.24 increased risk of sustaining a shoulder or elbow injury. No relationship between hip abduction strength and injury was observed for position players. Conclusion: Hip abduction asymmetry in pitchers was related to subsequent upper extremity injuries. The observed risk ratio indicates that hip abduction asymmetry may contribute a significant but small increased risk of injury. Clinical Relevance: Hip abduction muscle deficits may affect pitching mechanics and increase arm stress. Addressing hip asymmetry deficits that exceed 5% may be beneficial in reducing upper extremity injury rates in pitchers.

Sport Sciences↗
DOE OSTI2022

Real-time image denoising of mixed Poisson–Gaussian noise in fluorescence microscopy images using ImageJ

Fluorescence microscopy imaging speed is fundamentally limited by the measurement signal-to-noise ratio (SNR). To improve image SNR for a given image acquisition rate, computational denoising techniques can be used to suppress noise. However, common techniques to estimate a denoised image from a single frame either are computationally expensive or rely on simple noise statistical models. These models assume Poisson or Gaussian noise statistics, which are not appropriate for many fluorescence microscopy applications that contain quantum shot noise and electronic Johnson–Nyquist noise, therefore a mixture of Poisson and Gaussian noise. In this paper, we show convolutional neural networks (CNNs) trained on mixed Poisson and Gaussian noise images to overcome the limitations of existing image denoising methods. The trained CNN is presented as an open-source ImageJ plugin that performs real-time image denoising (within tens of milliseconds) with superior performance (SNR improvement) compared to conventional fluorescence microscopy denoising methods. The method is validated on external datasets with out-of-distribution noise, contrast, structure, and imaging modalities from the training data and consistently achieves high-performance ( > <#comment/> 8 d B ) denoising in less time than other fluorescence microscopy denoising methods.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

A high accuracy/resolution spectral element/Fourier–Galerkin method for the simulation of shoaling non-linear internal waves and turbulence in long domains with variable bathymetry

A high-order hybrid continuous-Galerkin numerical method, designed for the simulation of non-linear, non -hydrostatic internal waves and turbulence in long computational domains with complex bathymetry, is presented. The spatial discretization in the non-periodic wave-propagating directions, utilizes the nodal spectral element method. Such a high-order element-based discretization allows the highly accurate representation of complex domain geometry along with the flexibility of concentrating resolution in areas of interest. Under the assumption of the normal-to-isobath propagation of non-linear internal waves, a third periodic direction is incorporated via a Fourier-Galerkin discretization. The distinct non-hydrostatic nature of non-linear internal waves and, any instabilities and turbulence therein, necessitates the numerically challenging solution of the pressure Poisson problem. A defining feature of this work is the application of a domain decomposition approach, combined with block-Jacobi/deflation-based preconditioning to the pressure Poisson problem. Such a combined approach is particularly suitable for the long high aspect-ratio complex domains of interest and enables the efficient high-accuracy reproduction of the non-hydrostatic dynamics of non-linear internal waves. Implementation details are also described in the context of the stability of the solver and its parallelization strategy. A series of benchmarks of increasing complexity demonstrate the robustness of the flow solver. The benchmarks culminate with the three-dimensional simulation of a convectively breaking mode-one non-linear internal wave over a realistic South-China-Sea bathymetric transect and background current/stratification profiles.

Deflation↗
DOE OSTI2025

Effect of likelihood misspecification in Gaussian process-driven autonomous experimentation

In recent years, several groups have designed Autonomous Experiment (AE) models with the aim of using them as an alternative method for neutron scattering scanning. In an AE, Gaussian processes (GPs) are most frequently used due to their interpretability, their non-parametric nature, their universal approximation, and their closed-form predictive distribution. GPs have two key components, namely, the model for the likelihood of a neutron count knowing the underlying dynamic structure factor and the acquisition function. In this paper, we investigate the impact, on the quality of an AE, of the likelihood and acquisition function choices, in energy scans and (Q, ω) ones, with respect to the signal-over-noise ratio. While we hypothesized that the quality of GP predictions would decrease when the normal to Poisson likelihood approximation breaks down at low count rates, we found that the use of the correct Poisson likelihood does not improve the quality of the data collected, as well as yields very poor results in (Q, ω) scans at low count rates. In fact, the best results are obtained with a combination of normal likelihood, including the observation noise, and the change in variance acquisition function. In addition, we find that the performance, or quality of the predictive distribution, is a misleading measure of efficiency, that is, of the quality of the data collected.

Perryman, David Elliott [Inst. Laue-Langevin (ILL)↗
DOE OSTI2025

Spectrally Stabilized Interface Capturing Formulation and Implementation in Nek5000/NekRS

This report documents the formulation of a novel level-set method for incompressible two-phase flows in the continuous Galerkin (CG) high order spectral element framework. The overall method hinges on a novel implementation of the spectral vanishing viscosity (SVV) operator for the stabilization of linear/non-linear hyperbolic problems. The multidimensional SVV convolution kernels, which in essence, have a similar effect as a high pass filter applied to the derivatives, are formulated by exploiting the tensor product form, analogous to the construction of the usual stiffness matrix system. The resulting kernels are directionally decoupled and ensure a linear, symmetric positive definite, elliptic matrix operator. The SVV formulation is demonstrated to provide a robust stabilizing mechanism through challenging linear and non-linear hyperbolic problems, including problems pertinent to the level-set formulation. The two-phase framework conceptualized herein is based on the conservative level-set (CLS) method which represents the interface between the fluids by the 0.5 iso-contour of the smoothed Heaviside function. The CLS method is augmented with a preconditioning procedure for interface normals using the signed distance function which precludes the manifestation of spurious oscillations in the vicinty of the interface. Further, the existing mixed explicit-implicit approach for the solution of Navier-Stokes equations in Nek5000, as described in Tomboulides et al, is augmented with a pressure coefficient splitting approach for the Poisson equation, which greatly accelerated the convergence of pressure solver for two-phase systems with large density ratio. The robustness and accuracy of the overall two-phase method is demonstrated through canonical challenging problems involving high density and viscosity ratios, with and without surface tension. The two-phase formulation is wholly implemented in Nek5000 and the SVV stabilization method is implemented in NekRS, which is the essential precursor to the two-phase framework, undergoing active development.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Measurements of Proton High-Order Cumulants in s N N = 3 GeV Au + Au Collisions and Implications for the QCD Critical Point

We report cumulants of the proton multiplicity distribution from dedicated fixed-target Au + Au collisions at $\sqrt{s_{NN}}$ = 3.0 GeV , measured by the STAR experiment in the kinematic acceptance of rapidity ( y ) and transverse momentum ( p T ) within - 0.5 < y < 0 and 0.4 < pT < 2.0 GeV / c . In the most central 0%–5% collisions, a proton cumulant ratio is measured to be C 4 / C 2 = - 0.85 ± 0.09 ( stat ) ± 0.82 ( syst ) , which is 2 σ below the Poisson baseline with respect to both the statistical and systematic uncertainties. The hadronic transport UrQMD model reproduces our C 4 / C 2 in the measured acceptance. Compared to higher energy results and the transport model calculations, the suppression in C 4 / C 2 is consistent with fluctuations driven by baryon number conservation and indicates an energy regime dominated by hadronic interactions. These data imply that the QCD critical region, if created in heavy-ion collisions, could only exist at energies higher than 3 GeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗