Search NASA⌕ Search

SEARCH · Search NASA

Results for “Polar Metals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

New Propellants and Cryofuels

The proposed research will investigate the stability and cryogenic properties of solid propellants that are critical to NASA s goal of realizing practical propellant designs for future spacecraft. We will determine the stability and thermal properties of a solid hydrogen-liquid helium stabilizer in a laboratory environment in order to design a practical propellant. In particular, we will explore methods of embedding atomic species and metallic nano-particulates in hydrogen matrices suspended in liquid helium. We will also measure the characteristic lifetimes and diffusion of atomic species in these candidate cryofuels. The most promising large-scale advance in rocket propulsion is the use of atomic propellants; most notably atomic hydrogen stabilized in cryogenic environments, and metallized-gelled liquid hydrogen (MGH) or densified gelled hydrogen (DGH). The new propellants offer very significant improvements over classic liquid oxygen/hydrogen fuels because of two factors: (1) the high energy-release, and (ii) the density increase per unit energy release. These two changes can lead to significant reduced mission costs and increased payload to orbit weight ratios. An achievable 5 to 10 percent improvement in specific impulse for the atomic propellants or MGH fuels can result in a doubling or tripling of system payloads. The high-energy atomic propellants must be stored in a stabilizing medium such as solid hydrogen to inhibit or delay their recombination into molecules. The goal of the proposed research is to determine the stability and thermal properties of the solid hydrogen-liquid helium stabilizer. Magnetic resonance techniques will be used to measure the thermal lifetimes and the diffusive motions of atomic species stored in solid hydrogen grains. The properties of metallic nano-particulates embedded in hydrogen matrices will also be studied and analyzed. Dynamic polarization techniques will be developed to enhance signal/noise ratios in order to be able to detect low concentrations of the introduced species. The required lifetimes for atomic hydrogen and other species can only be realized at low temperatures to avoid recombination of atoms before use as a fuel.

Palasezski, Bryan↗
NASA NTRS2013

Microwave Kinetic Inductance Detector with Selective Polarization Coupling

A conventional low-noise detector requires a technique to both absorb incident power and convert it to an electrical signal at cryogenic temperatures. This innovation combines low-noise detector and readout functionality into one device while maintaining high absorption, controlled polarization sensitivity, and broadband detection capability. The resulting far-infrared detectors can be read out with a simple approach, which is compact and minimizes thermal loading. The proposed microwave kinetic inductance detector (MKID) consists of three basic elements. The first is the absorptive section in which the incident power is coupled to a superconducting resonator at far-infrared frequency above its superconducting critical frequency (where superconductor becomes normal conductor). This absorber's shape effectively absorbs signals in the desired polarization state and is resonant at the radio frequency (RF) used for readout of the device. Control over the metal film used in the absorber allows realization of structures with either a 50% broadband or 100% resonance absorptance over a 30% fractional bandwidth. The second element is a microwave resonator - which is realized from the thin metal films used to make the absorber as transmission lines - whose resonance frequency changes due to a variation in its kinetic inductance. The resonator's kinetic inductance is a function of the power absorbed by the device. A low-loss dielectric (mono-crystalline silicon) is used in a parallel-plate transmission line structure to realize the desired superconducting resonators. There is negligible coupling among the adjacent elements used to define the polarization sensitivity of each detector. The final component of the device is a microwave transmission line, which is coupled to the resonator, and allows detection of changes in resonance frequency for each detector in the focal plane array. The spiral shape of the detector's absorber allows incident power with two polarizations to couple to the detector equally. A stepped impedance resonator was used that allows the incident power absorbed in the detecting membrane area to be uniformly distributed in the detector's transmission line at the RF readout frequency. This maximizes the sensitivity of the detector. The signal is read out via a frequency multiplexing technique that requires a minimum number of interface transmission lines for readout. This reduces the packaging complexity and coupling to the device's thermal environment.

Wollack, Edward↗
NASA NTRS1984

Theory of the spin-1 bosonic liquid metal - Equilibrium properties of liquid metallic deuterium

The theory of a two-component quantum fluid comprised of spin-1/2 fermions and nonzero spin bosons is examined. This system is of interest because it embodies a possible quantum liquid metallic phase of highly compressed deuterium. Bose condensation is assumed present and the two cases of nuclear-spin-polarized and -unpolarized systems are considered. A significant feature in the unpolarized case is the presence of a nonmagnetic mode with quadratic dispersion owing its existence to nonzero boson spin. The physical character of this mode is examined in detail within a Bogoliubov approach. The specific heat, bulk modulus, spin susceptibility, and thermal expansion are all determined. Striking contrasts in the specific heats and thermal-expansion coefficients of the liquid and corresponding normal solid metallic phase are predicted.

Oliva, J.↗
NASA NTRS1990

Electrochemical impedance spectroscopy of metal alloys in the space transportation system launch environment

AC impedance measurements were performed to investigate the corrosion resistance of 18 alloys under conditions similar to the Space Transportation System (STS) launch environment. The alloys were: (1) zirconium 702; (2) Hastelloy C-22, C-276, C-4, and B-2; (3) Inconel 600 and 825; (4) Ferralium 255; (5) Inco Alloy G-3; (6) 20Cb-3; (7) SS 904L, 304LN, 316L, 317L, and 304L; (8) ES 2205; and (9) Monel 400. AC impedance data were gathered for each alloy at various immersion times in 3.55 percent NaCl-0.1N HCl. Polarization resistance values were obtained for the Nyguist plots at each immersion time using the EQUIVALENT CIRCUIT software package available with the 388 electrochemical impedance software. Hastelloy C-22 showed the highest overall values for polarization resistance while Monel 400 and Inconel 600 had the lowest overall values. There was good general correlation between the corrosion performance of the alloys at the beach corrosion testing site, and the expected rate of corrosion as predicted based on the polarization resistance values obtained. The data indicate that electrochemical impedance spectroscopy can be used to predict the corrosion performance of metal alloys.

Calle, Luz↗
NASA NTRS2017

Bipolar Electrode Sample Preparation Devices

An analyte selection device can include: a body defining a fluid channel having a channel inlet and channel outlet; a bipolar electrode (BPE) between the inlet and outlet; one of an anode or cathode electrically coupled with the BPE on a channel inlet side of the BPE and the other of the anode or cathode electrically coupled with the BPE on a channel outlet side of the BPE; and an electronic system operably coupled with the anode and cathode so as to polarize the BPE. The fluid channel can have any shape or dimension. The channel inlet and channel outlet can be longitudinal or lateral with respect to the longitudinal axis of the channel. The BPE can be any metallic member, such as a flat plate on a wall or mesh as a barrier BPE. The anode and cathode can be located at a position that polarizes the BPE.

Wang, Yi↗
NASA NTRS1977

Nonlinear optical response of metal-barrier-metal junctions

The optical response of metal-barrier-metal (MBM) junctions is discussed, with emphasis on the nonlinearity of response associated with reversal of polarity as optical intensity is increased. This nonlinear behavior can be used to measure correlation functions of optical pulses or to generate ultrashort electrical pulses. Expressions for the current flowing through the insulating barrier (junction), and for the rectification current, are given. Pulse signal and polarity of the electrical pulse evolves as the junction bias is varied about the null-signal bias. The apparatus used to obtain rectification pulse signals is described; the calculated evolution of the rectified pulse shape is found to correspond to that of pulse signals obtained experimentally. The generation of pulses six orders of magnitude smaller than a previously-obtained instrument-limited 1.6 nanosecond pulse has been observed.

Fan, B.↗
NASA NTRS1979

Mars surface composition from reflectance spectroscopy - A summary

Visible and near-infrared reflectance spectra and multispectral maps of the Martian surface are discussed, and implications of the data for the composition of the Martian surface are considered. Spacecraft and earth-based telescopic observations have confirmed the generally bimodal albedo distribution of the planet, dividing the surface into bright and dark regions. Mars spectra are characterized by the presence of strong Fe(+3) absorption, which is attributed to various ferric oxide minerals. Interpretations of the spectra from the dark regions indicate a basaltic or ultramafic source rock. Evidence for water ice or a highly desiccated metal hydrate has been obtained, along with evidence for CO2-ice only in the south polar cap. Mariner 9 observations of Martian dust suggest the presence of rather acidic rock or mineral particles, or a montmorillonite-type clay. Prospects for the future study of Martian surface composition include continuing earth-based spectrophotometric studies, and high-spectral-resolution mapping of a significant portion of the surface by the Galileo spacecraft and the next Mars mission.

Singer, R. B.↗
NASA NTRS1989

Microwave and camera sensor fusion for the shape extraction of metallic 3D space objects

The vacuum of space presents special problems for optical image sensors. Metallic objects in this environment can produce intense specular reflections and deep shadows. By combining the polarized RCS with an incomplete camera image, it has become possible to better determine the shape of some simple three-dimensional objects. The radar data are used in an iterative procedure that generates successive approximations to the target shape by minimizing the error between computed scattering cross-sections and the observed radar returns. Favorable results have been obtained for simulations and experiments reconstructing plates, ellipsoids, and arbitrary surfaces.

Shaw, Scott W.↗
NASA NTRS1982

A solar flare X-ray polarimeter for the Space Shuttle

An instrument has recently been built and tested which is designed to measure the polarization of the hard (5-30 keV) X-ray emission from solar flares, and thereby to investigate the energy release mechanism and constrain flare models. In particular, these measurements will help to determine whether hard X-ray bursts are produced by nonthermal or by thermal electrons. The polarimeter makes use of the angular dependence of Thomson scattering from targets of metallic lithium. It has an energy resolution of a few keV, a time resolution of 5 s, and sufficient sensitivity to measure polarization levels (3 sigma) of a few percent in about 10 s for a moderate strength solar flare. The instrumental polarization has been directly measured and found to be within the design goal of approximately 1%. This polarimeter is scheduled to be flown as part of the OSS-1 pallet on an early Space Shuttle mission.

Lemen, J. R.↗
NASA NTRS2017

Materials Science Corrosion Internship Overview

The overarching purpose of this semester-long internship at the National Aeronautics and Space Administration's (NASA) John F. Kennedy Space Center (KSC) was to study the impacts of corrosion regarding the development of ground support equipment (GSE), launch support structures, and flight hardware in aid of the Space Launch System (SLS) and Orion program. Environmental corrosion is known as one of the largest material degradation issues for any structure comprised of metal on the Space Coast and requires the initiation of special protective measures for proper corrosion mitigation. The four (4) projects to be described were conducted with NASA Civil Servants and NASA Contractors who provided necessary resources to ensure the highest quality of data acquisition and knowledge transfer. The main objective shared between all four (4) of the following projects was to assess the modes by which corrosion takes place in multiple environments as well as the methods by which these modes of corrosion can be reduced for the enhancement of the mechanical, structural, and chemical compatibility of those respective environments with different candidate metals. A multitude of test methods were performed over the duration of this internship to assess the corrosive properties of these different candidate metals.

Ground Systems Development and Operations↗
NASA NTRS1995

Poly(N-arylenbenzimidazoles) via aromatic nucleophilic displacement

Novel poly(N-arylenebenzimidazole)s (PNABIs) are prepared by the aromatic nucleophilic displacement reaction of novel di(hydroxyphenyl-N-arylene benzimidazole) monomers with activated aromatic dihalides or activated aromatic dinitro compounds. The polymerizations are carried out in polar aprotic solvents such as N-methyl-2-pyrrolidinone or N,N-dimethylacetamide using alkali metal bases such as potassium carbonate at elevated temperatures under nitrogen. The di(hydroxyphenyl N-arylenebenzimidazole) monomers are synthesized by reacting phenyl 4-hydroxybenzoate with bis(2-aminoanilino) arylenes in diphenylsulfone. Moderate molecular weight PNABIs of new chemical structures were prepared that exhibit a favorable combination of physical and mechanical properties. The use of the novel di(hydroxyphenyl N-arylenebenzimidazole)s permits a more economical and easier way to prepare PNABIs than previous routes.

Connell, John W.↗
NASA NTRS1995

Polybenzimidazoles via aromatic nucleophilic displacement

Novel molecular weight controlled and endcapped polybenzimidazoles (PBI) are prepared by the aromatic nucleophilic displacement reaction of di(hydroxyphenyl benzimidazole) monomers with activated aromatic dihalides or activated aromatic dinitro compounds. The PBI are endcapped with mono(hydroxyphenyl) benzimidazoles. The polymerizations are carried out in polar aprotic solvents such as N-methyl-2-pyrrolidinone or N,N-dimethylacetamide using alkali metal bases such as potassium carbonate at elevated temperatures under nitrogen. Mono(hydroxyphenyl) benzimidazoles are synthesizedby reacting phenyl-4-hydroxybenzoate with aromatic (o-diamine)s in diphenylsulfone. Molecular weight controlled and endcapped PBI of new chemical structures are prepared that exhibit a favorable combination of physical and mechanical properties.

Connell, John W.↗
NASA NTRS1997

Polybenzimidazoles Via Aromatic Nucleophilic Displacement

Novel molecular weight controlled and endcapped polybenzimidazoles (PBI) are prepared by the aromatic nucleophilic displacement reaction of di(hydroxyphenylbenzimidazole) monomers with activated aromatic dihalides or activated aromatic dinitro compounds. The PBI are endcapped with mono(hydroxyphenyl)benzimidazoles. The polymerizations are carried out in polar aprotic solvents such as N-methyl-2-pyrrolidinone or N,N-dimethylacetamide using alkali metal bases such as potassium carbonate at elevated temperatures under nitrogen. Mono(hydroxyphenyl)benzimidazoles are synthesized by reacting phenyl-4-hydroxybenzoate with aromatic (o-diamine)s in diphenylsulfone. Molecular weight controlled and endcapped PBI of new chemical structures are prepared that exhibit a favorable combination of physical and mechanical properties.

Connell, John W.↗
NASA NTRS1996

Poly(N-arylenebenzimidazole)s via aromatic nucleophilic displacement

Novel poly(N-arylenebenzimidazole)s (PNABls) are prepared by the aromatic nucleophilic displacement reaction of novel di(hydroxyphenyl-N-arylene benzimidazole) monomers with activated aromatic dihalides or activated aromatic dinitro compounds. The polymerizations are carried out in polar aprotic solvents such as N-methyl-2-pyrrolidinone or N,N-dimethylacetamide using alkali metal bases such as potassium carbonate at elevated temperatures under nitrogen. The di(hydroxyphenyl-N-arylenebenzimidazole) monomers are synthesized by reacting phenyl-4-hydroxybenzoate with bis(2-aminoanilino)arylenes in diphenylsulfone. Moderate molecular weight PNABIs of new chemical structures were prepared that exhibit a favorable combination of physical and mechanical properties. The use of the novel di(hydroxyphenyI-N-arylenebenzimidazole)s permits a more economical and easier way to prepare PNABIs than previous routes.

Connell, John W.↗
NASA NTRS1994

Multilayer Thin Film Polarizer Design for Far Ultraviolet using Induced Transmission and Absorption Technique

Good theoretical designs of far ultraviolet polarizers have been reported using a MgF2/Al/MgF2 three layer structure on a thick Al layer as a substrate. The thicknesses were determined to induce transmission and absorption of p-polarized light. In these designs Al optical constants were used from films produced in ultrahigh vacuum (UHV: 10(exp -10) torr). Reflectance values for polarizers fabricated in a conventional high vacuum (p approx. 10(exp -6 torr)) using the UHV design parameters differed dramatically from the design predictions. Al is a highly reactive material and is oxidized even in a high vacuum chamber. In order to solve the problem other metals have been studied. It is found that a larger reflectance difference is closely related to higher amplitude and larger phase difference of Fresnel reflection coefficients between two polarizations at the boundary of MgF2/metal. It is also found that for one material a larger angle of incidence from the surface normal brings larger amplitude and phase difference. Be and Mo are found good materials to replace Al. Polarizers designed for 121.6 nm with Be at 60 deg and with Mo at 70 deg are shown as examples.

Kim, Jongmin↗
NASA NTRS1972

Photoabsorption by ground-state alkali-metal atoms.

Principal-series oscillator strengths and ground-state photoionization cross sections are computed for sodium, potassium, rubidium, and cesium. The degree of polarization of the photoelectrons is also predicted for each atom. The core-polarization correction to the dipole transition moment is included in all of the calculations, and the spin-orbit perturbation of valence-p-electron orbitals is included in the calculations of the Rb and Cs oscillator strengths and of all the photoionization cross sections. The results are compared with recent measurements.

Weisheit, J. C.↗
NASA NTRS1971

Cryogenic glass-filament-wound tank evaluation

High-pressure glass-filament-wound fluid storage vessels with thin aluminum liners were designed, fabricated, and tested at ambient and cryogenic temperatures which demonstrated the feasibility of producing such vessels as well as high performance and light weight. Significant developments and advancements were made in solving problems associated with the thin metal liners in the tanks, including liner bonding to the overwrap and high strain magnification at the vessel polar bosses. The vessels had very high burst strengths, and failed in cyclic fatigue tests by local liner fracture and leakage without structural failure of the composite tank wall. The weight of the tanks was only 40 to 55% of comparable 2219-T87 aluminum and Inconel 718 tanks.

Morris, E. E.↗
NASA NTRS1999

Workshop on Extraterrestrial Materials from Cold and Hot Deserts

The workshop was held July 6-8, 1999 before the Meteoritical Society meeting in Johannesburg, South Africa. The venue was Kwa Maritane Resort in the Pilanesburg Game Reserve. Conveners were Ludolf Schultz (Chair, MPI fur Chemie), Ian Franchi (Open University), Arch Reid (University of Houston), and Mike Zolensky (NASA JSC). Extended abstracts will be published as an LPI Technical Report. In the first session, Marvin discussed three African iron meteorites: Cape of Good Hope, Gibeon, and Hoba. Grady presented a statistical analysis of meteorites from hot and cold deserts. Wasson discussed types of Antarctic iron meteorites. Several presentations characterized populations of meteorites from individual desert areas: Libyan Desert (Weber et al.), Nullarbor Region (Bevan et al.), and Mojave Desert (Kring et al. and Verish et al). Pairing among EET87503-group howardites was discussed by Buchanan et al. Based on 14C terrestrial ages of Allan Hills ordinary chondrites, Bland et al. suggested that ice flow may be the principal sink for Antarctic meteorites. The effects of preterrestrial and terrestrial alteration were considered in the second session. Nakamura et al. and Lipschutz discussed asteroidal metamorphism of carbonaceous chondrites. Zolensky presented evidence for preterrestrial halide and sulfide in meteorites. Crozaz and Wadhwa described terrestrial alteration of Dar al Gani 476. Welten and Nishiizumi discussed terrestrial weathering of chondrites from Frontier Mountain, Antarctica. Most of the third session dealt with terrestrial meteorite ages. Based on 14C-10Be ages, Jull et al. discussed the exponential decay in numbers of meteorites with increased age. Nishiizumi et al. concluded that some Allan Hills meteorites have much older terrestrial ages than any meteorites from Lewis Cliffs. Welten et al. discussed terrestrial ages determined by 41Ca/36CI of metal separates from hot desert meteorites. Based on a comparison with large IDPs, Flynn et al. suggested that polar micrometeorites, lost a water-soluble sulfate phase by terrestrial alteration. Nyquist suggested that Type I cosmic spheres from deep sea sediments and polar ice were derived from carbonaceous chondrite-like asteroidal sources. The final session considered noble gases, cosmic ray effects, and thermoluminescence. Calculations presented by Reedy indicate that cosmic ray-produced nuclides are more likely to be preserved in small objects than in larger objects. Murty and Mohapatra. reported that trapped gas in Dar al Gani 476 includes a Martian atmospheric component. Wieler et al. and Scherer et al. reported noble gas abundances in different types of desert meteorites. Patzer and Schultz discussed the influence of terrestrial weathering on cosmic ray exposure ages of enstatite chondrites. Franchi et al. suggested that it is difficult to discriminate whether differences in gas release profiles of lunar meteorites from hot deserts and returned lunar samples are the result of terrestrial weathering or shock metamorphism. Benoit and Sears surveyed natural and induced thermoluminescence of Antarctic ordinary chondrites. Merchel et al. analyzed Saharan meteorites with short or complex exposure histories.

Buchanan, Paul C.↗