SEARCH · Search NASA
Results for “Polymer Blend”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Key factors behind the superior performance of polymer-based NFA blends
Suppressed face-on stacking and crystallinity in ZR1:Y6 reduce charge dissociation, leading to more field-dependent charge generation compared to PM7:Y6, despite similar energy offsets in both blends.
Analysis of Small-Angle Neutron Scattering from Blends of Charged and Neutral Polymers Based on Rod–Coil Random Phase Approximation
Blends of charged and neutral polymers are of interest due to potential applications in rechargeable batteries. In this study, concentration fluctuations in blends of charged poly[lithium 3-(methacryloyloxy)propylsulfonyl-1-(trifluoromethanesulfonyl)imide] (PLiMTFSI) and neutral poly(ethylene oxide) (PEO) were investigated by small-angle neutron scattering (SANS). The scattering data were analyzed in the framework of the random phase approximation (RPA). Since ion dissociation can lead to stiffening, the charged polymers were approximated as rods, while the neutral polymers were assumed to be random coils. This approach works reasonably well at low weight fractions of charged polymers. For blends with higher weight fractions of the charged polymer, concentration fluctuations were highly suppressed, resulting in q-independent coherent structure factors that are inconsistent with the rod-coil RPA.
Magnetic feed material and its use in producing bonded permanent magnets by additive manufacturing
A method for producing magnet-polymer pellets useful as a feedstock in an additive manufacturing process, comprising: (i) blending thermoplastic polymer and hard magnetic particles; (ii) feeding the blended magnet-polymer mixture into a pre-feed hopper that feeds directly into an inlet of a temperature-controlled barrel extruder; (iii) feeding the blended magnet-polymer mixture into the barrel extruder at a fixed feed rate of 5-20 kg/hour, wherein the temperature at the outlet is at least to no more than 10° C. above a glass transition temperature of the blended magnet-polymer mixture; (iv) feeding the blended magnet-polymer mixture directly into an extruding die; (v) passing the blended magnet-polymer mixture through the extruding die at a fixed speed; and (vi) cutting the magnet-polymer mixture at regular intervals as the mixture exits the extruding die at the fixed speed. The use of the pellets as feed material in an additive manufacturing process is also described.
Sub-picosecond charge-transfer at near-zero driving force in polymer:non-fullerene acceptor blends and bilayers
Explore the source record for details and available documents.
Silane-modified polyester blends and methods of preparation
A silane-modified polyester blend comprising a polyester polymer homogeneously blended with silane molecules containing two or three alkoxy groups bound to the silicon atom, wherein said silane molecules are present in said polyester blend in an amount of 0.05-20 wt % (or, e.g., 0.05-10 wt %, 0.05-5 wt %, or 0.05-2 wt %). The polyester polymer may, in particular embodiments, be a polyhydroxyalkanoate, terephthalate-based polyester, adipate-based, or succinate-based polyester. The silane molecule may be according to the formula (R2O)2SiR3R4, wherein R2 groups are independently selected from alkyl groups containing 1-4 carbon atoms; and R3 and R4 are independently selected from OR2 groups and alkyl groups containing 1-12 carbon atoms, provided that at least one of R3 and R4 is an alkyl group, wherein the alkyl group optionally includes one or more heteroatoms selected from oxygen, nitrogen, halogen, sulfur, phosphorus, and silicon. Methods for producing the silane-modified polyester blend are also described.
Chain rigidity controlled aggregation ability and solid-state microstructures for efficient stretchable conjugated polymer films
Stretchable conjugated polymer films with good electrical performance under mechanical deformation are highly desirable for soft electronics. However, the mechanical and electrical properties of these films, particularly in conjugated polymer:elastomer blends, are not fully understood at molecular level. Here, this study explores the relationships among molecular structure, aggregation ability, film microstructure, and the electrical/mechanical properties of three diketopyrrolopyrrole-based conjugated polymers (P1, P2, P3) with decreasing backbone rigidity and their corresponding polymer:elastomer blends. The most flexible polymer P3 shows strong aggregation, which forms highly crystalline fibers to produce fragile neat film and produces large isolated crystallites restricting charge transport in blend film. As chain rigidity increases, the P1 and P2 polymers show weaker aggregation, and produce smaller crystallites in neat films with enhanced ductility. P1 and P2 based blend films display nanocrystallites polymer networks with dispersed elastomer domains. As a result, we achieved near-constant charge mobility before and after stretching under 50 % strain for P2-based blend films with well-controlled pathways for both charge transport and energy dissipation. This study demonstrates the critical role of backbone rigidity in regulating the properties of stretchable conjugated polymer films, paving the way for more reliable and deformable materials in soft electronics.
Emergent Nanostructure and Ion Transport in Polyzwitterion/Polyanion Blends
Solid polymer electrolytes (SPEs) hold great promise for the advancement of next-generation energy storage devices. However, the ion transport mechanism in SPEs remains poorly understood. In this study, we investigate blends of poly(1-(3-sulfonatopropyl)-2-vinylpyridinium) (P2VPPS) and poly(lithium (trifluoromethane)sulfonimide methacrylate) (P(MTFSI)Li) of varying molar ratios to develop a mechanistic understanding of ionic conductivity in a miscible polyzwitterion/polyanion system. Polyanions can act as single-ion conductors, but conductivity is often prohibitively low due to the decreased segmental mobility and ion aggregation. Here, it is hypothesized that the introduction of a polyzwitterion would competitively interact with the polyanion charge groups to realize improvements in the conductivity. Attractive interactions between the polyanions and polyzwitterions are confirmed by the blend’s increased glass transition temperature using the Gordon–Taylor equation. Notably, an ordered local nanostructure (∼24 Å) emerged in the P2VPPS/P(MTFSI)Li system at certain compositions, as characterized by small-angle X-ray and neutron scattering (SAXS/SANS). Concurrent with the emergence of this structure, broadband dielectric spectroscopy confirmed improvements in ionic conductivity. The highest conductivity is observed at a specific blend ratio P2VPPS:P(MTFSI)Li = 0.2:1 in the glassy state and 0.3:1 in the rubbery state, corresponding to the lowest effective activation energy (E*). Coarse-grained molecular dynamics simulations further emphasize the role of complexation between polyzwitterion and polyanion chains, correlating with the emergence of a new peak in SAXS and SANS for the blends. This work provides a fresh perspective on the role of local structural design in developing SPEs and offers insights into the morphological effects on ionic conductivity.
16.52% Efficiency All-Polymer Solar Cells with High Tolerance of the Photoactive Layer Thickness
All-polymer solar cells (all-PSCs) have drawn growing attention and achieved tremendous progress recently, but their power conversion efficiency (PCE) still lags behind small-molecule-acceptor (SMA)-based PSCs due to the relative difficulty on morphology control of polymer photoactive blends. Here, in this work, low-cost PTQ10 is introduced as a second polymer donor (a third component) into the PM6:PY-IT blend to finely tune the energy-level matching and microscopic morphology of the polymer blend photoactive layer. The addition of PTQ10 decreases the π–π stacking distance, and increases the π–π stacking coherence length and the ordered face-on molecular packing orientation, which improves the charge separation and transport in the photoactive layer. Moreover, the deeper highest occupied molecular orbital energy level of the PTQ10 polymer donor than PM6 leads to higher open-circuit voltage of the ternary all-PSCs. As a result, a PCE of 16.52% is achieved for ternary all-PSCs, which is one of the highest PCEs for all-PSCs. In addition, the ternary devices exhibit a high tolerance of the photoactive layer thickness with high PCEs of 15.27% and 13.91% at photoactive layer thickness of ≈205 and ≈306 nm, respectively, which are the highest PCEs so far for all-PSCs with a thick photoactive layer.
2-Aminoanthracene Crystallization in Its Compatible Polystyrene Block: RAFT Synthesis and Enhanced Charge Retention in Pentacene Transistor Gate Dielectrics
We synthesized polystyrene-block-polyanthrylaminomethylstyrene (PS-b-PAAS) via RAFT reaction and side chain modification where the PAAS block is 50%. By blending 2-aminoanthracene (2AA) with PS-b-PAAS, the co-aggregation behavior of the PAAS block and 2AA within the thin film was observed by optical microscopy (OM) and x-ray diffraction. At 5 and 10 wt% of 2AA within the thin film, OM results showed a clear morphological difference between PS matrix and PS-b-PAAS matrix. Differences in the 2AA excited state lifetime in these matrices were also established using transient absorption spectroscopy (TAS). Blends were used as gate dielectrics in pentacene transistors. We compared characteristic voltage (Vc, an indicator of threshold voltage) before and after charging of PS-b-PAAS blended with unsubstituted PS and both polymers individually blended with 2AA. For blended PS-b-PAAS and PS, as the concentration of PS-b-PAAS increases, the decreased Vc especially with negative charging of the pentacene indicated a larger concentration of charge carriers induced by the dielectric film. The charging experiments also revealed that the unique structure formed by the 2AA/PS-b-PAAS blend significantly affected the charge storage capability of the organic field-effect transistors (OFET). Furthermore, this work demonstrates the novel co-aggregation structure in the dielectrics, and furthermore its impact on charge storage capability in pentacene OFETs.
Charge Trapping in Polymer Electrets with Highly Dilute Blended Arylamine Donors
The nature of and ability to control biasing across dielectrics is a key area of research for the design of more versatile organic field-effect transistors (OFETs). One important technique to achieve such control is the inclusion of donor or acceptor molecules in the dielectric to modulate charge trapping therein. Here in this work, we report the effects of the additive concentration on OFETs with two different arylamines blended in polystyrene (PS) dielectrics, N,N'-diphenyl-N,N'-di-p-tolylbenzene-1,4-diamine (MPDA) and 4-anilinotriphenylamine (PATPA), as well as a comparison between PATPA/PS blends and dielectrics where PATPA was chemically tethered to the PS matrix. Dielectrics included in OFETs were subject to charging, and their charging capacity and stability were extracted from the OFET threshold voltages. For both MPDA/PS and PATPA/PS, blends with additive mole fractions as low as χ = 3 × 10 –4 were sufficient to cause increases in the charge trapping relative to pure PS dielectrics. We observed a pronounced inverse relationship between the capacity and stability of blended systems at larger mole fractions (χ = 10 –2 ) where the interadditive molecule distances became comparable to their size (~1 nm). Differences between MPDA and PATPA behaviors were consistent with their different structures and sizes. Furthermore, we found a small effect on electronic trapping arising from the chemical tethering of PATPA to the PS matrix. This result was consistent with the changes made to the additive during the tethering process and small compared to the observed differences arising from the concentration. These results suggest that the average intermolecular separation is a key determinant of charge storage stability in blended dielectrics.
Polyethylene Blends for Improved Oxygen Barrier: Processing-Dependent Microstructure and Gas Permeability
Here this work demonstrates a greater than expected enhancement of oxygen barrier properties in linear low-density polyethylene (LLDPE)-based materials by blending LLDPE with high-density polyethylene (HDPE). The films made by melt pressing the LLDPE/HDPE blends had a greater reduction in oxygen permeability coefficients (PO 2 ) than predicted using common permeability reduction models, i.e., the harmonic average model and zero-permeability nanofiller model. The reduction of PO 2 was attributed to the presence of spherulite crystal structures, as revealed by atomic force microscopy combined with infrared spectroscopy (AFM-IR). The LLDPE matrix exhibited significant spherulite formation even at a relatively low addition of HDPEs, which likely formed tortuous pathways for diffusing oxygen molecules. Transport results from melt-pressed films contrast with the results from films with similar compositions prepared by film blowing, which did not show barrier enhancement beyond expectation. AFM-IR revealed that the blown films lacked spherulite crystals likely due to stretching in the machine direction followed by rapid cooling. These findings demonstrate the role of processing in controlling microstructures and thus the oxygen barrier performance. This work offers the possibility of achieving easily recyclable LLDPE-based packaging materials by simple blending of polyethylenes with different crystalline content.
Data of High-Temperature Dynamic LCM Testing Setup
Data from high temperature dynamic sealing tests for various fracture widths, at various temperatures (degrees F), with 5 wt.% bentonite-based mud containing various material fiber contents, at 100 to 400 psi differential pressure. Data from pressure test and evaluation of the dynamic lost circulation materials (LCM) testing unit to reflect the condition of open and sealed fracture using fracture width of 1000 microns at 120 degrees F. Links to two papers based on the data - "Loss circulation prevention in geothermal drilling by shape memory polymer" which was published in Geothermics 89 (2021) 101943) as well as "Evaluating sealability of blended smart polymer and fiber additive for geothermal drilling with the effect of fracture opening size", published in the Journal of Petroleum Science and Engineering 206 (2021) 108998.
Production and Evaluation of Fluorophore-Doped Polymer Substrates to Screen for Plastic-Degrading Enzymes
Fast and sensitive analytical methods are the key to efficient screening of plastic-degrading enzymes. Here, we present a streamlined and affordable approach to assess the enzymatic deconstruction of insoluble synthetic polymers by blending them with a fluorescent dye, rhodamine 6G, and we evaluate this screening method using poly(ethylene terephthalate) (PET) as a model material. Our results indicate that enzymatic depolymerization of the rhodamine-doped PET can be observed in a high-throughput fashion by following release of the fluorophore. The fluorescence data obtained during the hydrolysis of rhodamine-doped PET by 14 PET hydrolases, produced with a robotic platform, correlated with the quantitative chromatographic analysis of PET degradation products. Remarkably, the use of the rhodamine-loaded PET substrate resulted in negligibly low background signals even when detecting PETase activity in crude cell lysates, suggesting suitability for screening of a wide variety of samples. Encouraged by these results, we next produced a selection of polyethylene- and nylon-based materials loaded with rhodamine 6G. While rapid leaching of fluorophore observed with nylon substrates limits the utility of the method for detecting nylonase activity, the rhodamine-loaded polyethylene showed promising performance in passive diffusion tests, indicating that this latter substrate may be used to screen for polyolefin-degrading enzymes.
Regulation of Side‐Chain Symmetry for Delaying Triplet Formation and Suppressing Non‐Radiative Loss in Organic Solar Cells
Abstract The structural revolutions of non‐fullerene acceptors (NFAs) have driven continuous efficiency breakthroughs in organic solar cells (OSCs). Rational regulation of NFA structures toward efficient exciton dissociation and mitigated non‐radiative recombination is pivotal for OSCs. The incorporation of asymmetric side chains on NFAs can often achieve these goals by inducing a desirable aggregate state. However, it lacks the studies to directly correlate the side‐chain symmetry of NFAs with the exciton delocalization and triplet dynamics in OSCs. Herein, The influence of structural symmetry on the aggregate properties is systematically investigated and exciton/charge dynamics based on two developed biaxial‐conjugated NFAs with varied side‐chain symmetry. The symmetric NFA having diverse molecular packing orientations can form multiple charge transfer channels in its blend with polymer donor, which cannot be found in that comprising the asymmetric ones. Moreover, a slower rate and lower ratio of the spin‐triplet state are formed in the blend of symmetric NFA, resulting in a much lower non‐radiative voltage loss in corresponding OSCs. This study reveals the distinct advantages of symmetric NFAs in both aggregate properties and exciton/charge dynamics over those of asymmetric ones, paving the way for developing high‐performance OSCs using easier‐to‐prepare, low‐cost symmetric materials.