Search NASA⌕ Search

SEARCH · Search NASA

Results for “Polymer glasses”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Self-consistent hopping theory of activated relaxation and diffusion of dilute penetrants in dense crosslinked polymer networks

We generalize a microscopic statistical mechanical theory of the activated dynamics of dilute spherical penetrants in glass-forming liquids to study the influence of crosslinking in polymer networks on the penetrant relaxation time and diffusivity over a wide range of temperature and crosslink fraction (f n ). Our calculations are relevant to recent experimental studies of a nm-sized molecule diffusing in poly-(n-butyl methacrylate) networks. The theory predicts the penetrant relaxation time increases exponentially with the glass transition temperature, T g (f n ), which grows roughly linearly with the square root of fn due to the coupling of local hopping to longer-range collective elasticity. Moreover, T g is also found to be proportional to a geometric confinement parameter defined as the ratio of the penetrant diameter to the mean network mesh size. The decoupling ratio of the penetrant and Kuhn segment alpha times displays a complex non-monotonic dependence on f n and temperature that is well collapsed based on the variable T g (f n )/T. A model for the penetrant diffusion constant that combines activated relaxation and entropic mesh confinement is proposed, which results in a significantly stronger suppression of mass transport with degree of effective supercooling than predicted for the penetrant alpha time. Furthermore, this behavior corresponds to a new network-based type of “decoupling” of diffusion and relaxation. In contrast to the diffusion of larger nanoparticles in high temperature rubbery networks, our analysis in the supercooled regime suggests that for the penetrants studied the mesh confinement effects are of secondary importance relative to the consequences of crosslink-induced slowing down of activated hopping of glassy physics origin.

Chemistry↗
DOE OSTI2020

Literature Review of Thermomechanical Analysis, Its Instrument Components and Applications

Thermomechanical analysis (TMA) is used to measure the dimensional changes in a sample as a function of temperature. TMA allows for several modes of analysis, with expansion and compression being the most common. TMA is based on the theory of dilatometry and relies on the fact that polymers are viscoelastic materials, possessing both viscous and elastic properties. TMA yields information about the thermal effects on a polymer such as shrinkage, expansion, softening, melting, glass transition temperature and allows for the calculation of the coefficient of thermal expansion (CTE), which can be useful for many applications of polymers.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Literature Review of Thermomechanical Analysis, Its Instrument Components and Applications

Thermomechanical analysis (TMA) is used to measure the dimensional changes in a sample as a function of temperature. TMA allows for several modes of analysis, with expansion and compression being the most common. TMA is based on the theory of dilatometry and relies on the fact that polymers are viscoelastic materials, possessing both viscous and elastic properties. TMA yields information about the thermal effects on a polymer such as shrinkage, expansion, softening, melting, glass transition temperature and allows for the calculation of the coefficient of thermal expansion (CTE), which can be useful for many applications of polymers.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Effects of Polymer Morphology on Solvent and Catalyst Accessibility during Polyethylene and Polystyrene Autoxidation

Efficient catalytic deconstruction of plastics requires facile solvent and catalyst access to polymer substrates to minimize mass transfer effects. Autoxidation using Co(II) acetate, Mn(II) acetate, and a radical carrier in acetic acid is a promising strategy to deconstruct mixed plastic waste, yet the role of polymer morphology in governing solvent and catalyst accessibility remains poorly understood. Here, in situ simultaneous small- and wide-angle X-ray scattering (SAXS/WAXS), complemented by X-ray fluorescence (XRF) imaging and high-pressure differential scanning calorimetry (DSC), were used to elucidate interactions between acetic acid, a Co/Mn catalyst solution, and semicrystalline polyethylene (PE) and amorphous polystyrene (PS) from room temperature to 160 °C. In PE, acetic acid and catalyst access were confined to amorphous regions and cryomilled particle interfaces at room temperature, while crystalline lamellae remained intact after soaking for up to 34 h. Increasing temperature enabled solvent uptake into PE, followed by solvent-assisted softening above 100 °C, and a modest melting-point depression that removed lamellar transport barriers upon melting. Conversely for PS, acetic acid penetrated the glassy polymer without inducing chain mobility until the glass transition was reached, above which the observed structural changes were consistent with enhanced segmental mobility which enabled bulk penetration. These results suggest that polymer morphology and thermally activated physical transitions arising from diffusion and polymer–solvent interactions can influence whether autoxidation of plastics is transport-limited or kinetically controlled, providing a framework for aligning reaction conditions with reaction outcomes.

09 BIOMASS FUELS↗
DOE OSTI2025

Key Factors in Semi-Generic Coarse-Grained Modeling of Solid Polymer Electrolytes

Given the long length and time scales of interest and strong interactions present in solid polymer electrolytes, coarse-grained molecular models can be useful in understanding the molecular basis of their structure and transport properties. Rather than representing atoms individually, coarse-grained models use beads representing groups of atoms, making the system simpler and more efficient. Generic coarse-grained models, that are not built based on matching a particular atomistic system, can provide insight into the important physical considerations that apply across different chemical systems, though it can be unclear how to best match to experimental systems and capture relevant experimental behaviors with as simple of a model as possible. Here, we build on generic bead-spring models, but use stiff angle potentials, set different bead properties for different polymer types, and include additional ion parameters, creating a semi-generic coarse-grained model that can map more specifically to polymers and copolymers with different chain architectures, component glass transition temperatures, and ion solvation behaviors. We set most parameters with basic homopolymer data such as glass transition temperatures, Kuhn length, density, and dielectric constant, with further adjustment based on data from the polymer electrolyte system. We specifically model polystyrene-block-poly(oligo-oxyethylene methyl ether methacrylate) (PS-b-POEM) with lithium triflate salt, considering the POEM to be made of a poly(methylmethacrylate) backbone with poly(ethylene oxide) side chains. Solvation of ions is accounted for by additional polymer-ion interactions of the form -S/r4, plus additional lithium-polymer Lennard-Jones interactions. We find these potentials have different effects and discuss strategies for setting these parameters.

Zhang, Yuanhao↗
DOE OSTI2025

Spin Glass Behavior and Giant Magnetoresistance via Aliovalent Fe/Ni Alloying in Amorphous Tetrathiafulvalene-Tetrathiolate Coordination Polymers

The discovery of materials with programmable combinations of charge transport and magnetic properties is a major goal in synthetic chemistry. Molecular materials, such as coordination polymers (CPs), are emerging candidates in this field due to their synthetic modularity. While there are many conductive or magnetic CPs, single-component examples with both properties are still emerging. Here, in this work, we demonstrate how alloying paramagnetic Fe(III) centers into a highly conductive Ni-based CP results in novel amorphous materials with high conductivity and giant magnetoresistance. Aliovalent doping with paramagnetic Fe centers engenders spin-glass transitions, while Ni and the strong π-stacking interactions of tetrathiafulvalene-2,3,6,7-tetrathiolate (TTFtt) ligands support conductivity. Ni 0.69 Fe 0.31 TTFtt has σ ≈ 200 S/cm and a 1.8 K magnetoresistance of −52% at 5 T, among the largest for any coordination solid. This work demonstrates not only how magnetic properties can be rationally incorporated into conductive CPs, but also an unexpected potential for amorphous materials in spintronic applications.

amorphous materials↗
DOE OSTI2023

Polymer Macrocycles: A novel topology to control dynamics of rubbery materials (Final Report)

We have successfully made synthetic polymer rings that are larger than previously reported having entanglement numbers as high as Z w ≈300 if the rings entangled as do linear chains. The synthesis was carried out using reversible radical recombination polymerization (R3P) of dithiols which produces a polymer with a very small persistence length. The reported results show surprising dilute solution behaviors due to the fact that polymeric rings expand more than their linear counterparts for polymer chains having a large number of persistence lengths, as developed in this study. The results strongly argue for a systematic investigation of the dilute solution properties of rings having different persistence lengths in different quality solvents, where the theta-condition should lead to results that are independent of the persistence length. For the rheological investigations related to chain entanglements, the polyDODT rings could be diluted so that the rheological data covered from less than one entanglement spacing relative to the linear counterpart to a value of Z w =300. Importantly, because we were able to dilute extremely high entanglement number polyDODT rings to a similar entanglement number as those reported for polystyrene rings that were highly purified using LCCC, we demonstrated that the dynamics of the polyDODT rings virtually overlaps with the dynamics of the polystyrene rings which is very strong evidence that these high molecular weight polyDODT rings are of high purity. Our results demonstrate that the onset of entanglement in rings, as evidenced by the appearance of a rubbery plateau G N 0 and by the onset of a strong power-law dependence of the viscosity on molecular weight (η~M w 5.8 ) or entanglement number (η~Z w 5.8 ), occurs at much higher molecular weights or polymer concentrations than is the case for linear chains. These results should serve as a benchmark for future investigations of the behavior of entangled, circular macromolecules.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Polymer Macrocycles: A novel topology to control dynamics of rubbery materials

We have successfully made synthetic polymer rings that are larger than previously reported having entanglement numbers as high as $Z_w$≈300 if the rings entangled as do linear chains. The synthesis was carried out using reversible radical recombination polymerization (R3P) of dithiols which produces a polymer with a very small persistence length. The reported results show surprising dilute solution behaviors due to the fact that polymeric rings expand more than their linear counterparts for polymer chains having a large number of persistence lengths, as developed in this study. The results strongly argue for a systematic investigation of the dilute solution properties of rings having different persistence lengths in different quality solvents, where the theta-condition should lead to results that are independent of the persistence length. For the rheological investigations related to chain entanglements, the polyDODT rings could be diluted so that the rheological data covered from less than one entanglement spacing relative to the linear counterpart to a value of $Z_w$=300. Importantly, because we were able to dilute extremely high entanglement number polyDODT rings to a similar entanglement number as those reported for polystyrene rings that were highly purified using LCCC, we demonstrated that the dynamics of the polyDODT rings virtually overlaps with the dynamics of the polystyrene rings which is very strong evidence that these high molecular weight polyDODT rings are of high purity. Our results demonstrate that the onset of entanglement in rings, as evidenced by the appearance of a rubbery plateau $G_N^0$ and by the onset of a strong power-law dependence of the viscosity on molecular weight (η~$M_w^{5.8}$) or entanglement number (η~$Z_w^{5.8}$), occurs at much higher molecular weights or polymer concentrations than is the case for linear chains. These results should serve as a benchmark for future investigations of the behavior of entangled, circular macromolecules.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Free volume manipulation of a 6FDA-HAB polyimide using a solid-state protection/deprotection strategy

We report tert-butoxycarbonyl (t-BOC) is a thermally labile moiety that can be used to protect hydroxyl groups on polymers. In this study, t-BOC was appended onto a polyimide consisting of 2,2'-bis-(3,4-dicarboxyphenyl) hexafluoropropane dianhydride (6FDA) and 3,3'-dihydroxy-4,4'-diamino-biphenyl (HAB), after which the polymer was formed into self-standing films. Solid-state thermal treatments were performed to systematically remove t-BOC moieties to alter the physical packing structure and concomitant gas transport properties of the polymer. Despite performing deprotection reactions well below the glass transition temperature of 6FDA-HAB (~300 °C), this free volume manipulation (FVM) approach produced only subtle differences in polymer density, fractional free volume, average free volume element size, and gas transport properties relative to the unprotected polymer. While these findings suggest that thermally removing covalently bound functional groups from polymer films can be used to manipulate free volume and gas transport performance for glassy polymers, more robust polymer systems than linear polyimides are required to preserve the nascent free volume architecture generated from this approach.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Less Is More: Oligomer Extraction and Hydrothermal Annealing Increase PDMS Adhesion Forces for Materials Studies and for Biology-Focused Microfluidic Applications

Cues in the micro-environment are key determinants in the emergence of complex cellular morphologies and functions. Primary among these is the presence of neighboring cells that form networks. For high-resolution analysis, it is crucial to develop micro-environments that permit exquisite control of network formation. This is especially true in cell science, tissue engineering, and clinical biology. We introduce a new approach for assembling polydimethylsiloxane (PDMS)-based microfluidic environments that enhances cell network formation and analyses. We report that the combined processes of PDMS solvent-extraction and hydrothermal annealing create unique conditions that produce high-strength bonds between solvent-extracted PDMS (E-PDMS) and glass—properties not associated with conventional PDMS. Extraction followed by hydrothermal annealing removes unbound oligomers, promotes polymer cross-linking, facilitates covalent bond formation with glass, and retains the highest biocompatibility. Herein, our extraction protocol accelerates oligomer removal from 5 to 2 days. Resulting microfluidic platforms are uniquely suited for cell-network studies owing to high adhesion forces, effectively corralling cellular extensions and eliminating harmful oligomers. We demonstrate the simple, simultaneous actuation of multiple microfluidic domains for invoking ATP- and glutamate-induced Ca 2+ signaling in glial-cell networks. These E-PDMS modifications and flow manipulations further enable microfluidic technologies for cell-signaling and network studies as well as novel applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Coupling and Decoupling between Stickers and Backbones in Associating Polymers with Terminally Functionalized Side Chains

Associating polymers have recently attracted tremendous attention as self-healing polymers due to the dynamic reversibility of sticker association–dissociation processes. These sticker dynamics inevitably slow significantly as segmental dynamics decelerate below the glass transition temperature that limits the operational temperatures of associating polymers. Using broadband dielectric spectroscopy on a new set of associating polymers composed side chains of various lengths and terminal carboxylic-acid sticker functionality, we discovered an unexpected decoupling near the glass transition (T g ) between the slower backbone and fast sticker motions. These two motions have distinct activation energies for the motion of the sulfur linkage adjacent to the backbone (~22 to 26 kJ/mol) and the carboxylic acid groups (~5 to 8 kJ/mol). A second decoupling appears in the polymer with the longest side chain length at T g – 20 K, reflecting the dynamics of various carboxylic acid binding configurations. Furthermore, our findings open the door to design associating polymers with the capability of sticker association/dissociation at low temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Multiscale Modeling of Vinyl-Addition Polynorbornenes: The Effect of Stereochemistry

Vinyl-addition polynorbornenes are candidates for designing high-performance polymers due to unique characteristics, which include a high glass transition temperature associated with a rigid backbone. Recent studies have established that the processability and properties of these polymers can be fine-tuned by using targeted substitutions. However, synthesis with different catalysts results in materials with distinct properties, potentially due to the presence of various stereoisomers that are difficult to quantify experimentally. Herein, we develop all-atom models of polynorbornene oligomers based on classical force fields and density functional theory. To establish the relationship between chemical architecture, chain conformations, and melt structure, we perform detailed molecular dynamics simulations with the fine-tuned atomistic force field and propose simpler coarse-grained descriptions to address the high molecular weight limit. All-atom simulations of oligomers suggest high glass transition temperatures in the range of 550–600 K. In the melt state (800 K), meso chains form highly rigid extended coils (C∞≈11) with amorphous structural characteristics similar to the X-ray diffraction data observed in the literature. In contrast, simulations with racemo chains predict highly helical tubular chain conformations that could promote assembly into crystalline structures.

Polymer Science↗
DOE OSTI2021

Additive Manufacturing of Lightweight Structures: Microfibrillated Cellulose – PLA Biofoams

Extrusion-based polymer additive manufacturing (AM) technology is growing rapidly. The introduction of fiber reinforced feedstock materials and recent developments in the manufacturing systems have promulgated large scale AM of composites to create new industries and applications. Synthetic fibers such as carbon and glass fibers are commonly used to reinforce polymer composites. However, increasing environmental and long-term sustainability concerns are leading to new materials using cellulose fiber reinforcement in bio-derived polymers. These materials offer new property sets, new supply chains and have the potential to provide economical solutions leading to new applications. Large scale AM can be attractive for many different applications because of its ability to freeform manufacture complex geometries; each application may require different material properties. One of the novel application areas for large scale AM is 3D printing of lightweight materials via foaming. Although achieving low density is the key in light weighting via foaming, mechanical performance is also important for many applications. In this study the impact of micro-cellulose fibers (MFC) on foaming behavior and the mechanical properties of additively manufactured parts is investigated. MFC-polylactic acid (PLA) feedstock pellets were prepared at varying MFC content (5, 10, 15 and 20 wt.%) to understand the impact of cellulose fiber content on density and mechanical properties of the AM biocomposites. Also, the impact of extrusion speed and foaming agent content on the AM biocomposites is investigated. Although achieving uniform printed foam structure is challenging with the presence of cellulose fibers, promising results were accomplished with density values below 0.5g/cm3.

Tekinalp, Halil↗
DOE OSTI2022

A Study on Recycled Polymers Recovered from Multilayer Plastic Packaging Films by Solvent–Targeted Recovery and Precipitation (STRAP)

Multilayer plastic film use increased in multiple packaging applications due to its versatility and overall increased performance over monolayer structures. However, the performance gains from multiple layers also make recycling difficult because they contain multiple polymers that can be immiscible and burdensome to traditional mechanical recycling operations. A possible solution is the solvent-targeted recovery and precipitation (STRAP) process, but the effect on the retrieved polymer is still unknown. Here, the STRAP process is applied to two different multilayer films and samples of recovered polymers are evaluated for physical, molecular, and thermal properties. Changes in the molecular weight are not significant, but differences in thermal properties are reported along with the coprecipitation of different polymers. Solvent retention in the polymer matrix from STRAP reduced the glass transition temperature of samples, but enhanced drying recovered it. Heavy metals, such as Cd, Cr, and Pb are not detected, indicating regulatory compliance for different applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Highly stretchable ionically crosslinked acrylate elastomers inspired by polyelectrolyte complexes

Dynamic bonds are a powerful approach to tailor the mechanical properties of elastomers and introduce shape-memory, self-healing, and recyclability. Among the library of dynamic crosslinks, electrostatic interactions among oppositely charged ions have been shown to enable tough and resilient elastomers and hydrogels. In this work, we investigate the mechanical properties of ionically crosslinked ethyl acrylate-based elastomers assembled from oppositely charged copolymers. Using both infrared and Raman spectroscopy, we confirm that ionic interactions are established among polymer chains. We find that the glass transition temperature of the complex is in between the two individual copolymers, while the complex demonstrates higher stiffness and more recovery, indicating that ionic bonds can strengthen and enhance recovery of these elastomers. We compare cycles to increasing strain levels at different strain rates, and hypothesize that at fast strain rates ionic bonds dynamically break and reform while entanglements do not have time to slip, and at slow strain rates ionic interactions are disrupted and these entanglements slip significantly. Further, we show that a higher ionic to neutral monomer ratio can increase the stiffness, but its effect on recovery is minimal. Lastly, taking advantage of the versatility of acrylates, ethyl acrylate is replaced with the more hydrophilic 2-hydroxyethyl acrylate, and the latter is shown to exhibit better recovery and self-healing at a cost of stiffness and strength. The design principles uncovered for these easy-to-manufacture polyelectrolyte complex-inspired bulk materials can be broadly applied to tailor elastomer stiffness, strength, inelastic recovery, and self-healing for various applications.

36 MATERIALS SCIENCE↗