Search NASA⌕ Search

SEARCH · Search NASA

Results for “Polymer phase”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Energetic Copolymers From LLM-105 and Aliphatic Isocyanates

Energetic polymers typically feature fuel-rich backbones with pendant oxidizing explosophores, which are used to modify pressure and temperature characteristics in energetic formulations. However, these pendant explosophores generally increase sensitivity and decrease the thermal stability of the polymer in the condensed phase. Direct polymerization of insensitive high explosives (IHEs) bearing polymerizable functionalities, such as amines, provides a synthetic platform for deriving tunable energetic materials. Here, this work demonstrates the first direct polymerization of the IHE 2,6-diamino-3,5-dinitropyrazine-1-oxide (LLM-105) with aliphatic isocyanate comonomers to yield an energetic copolyurea (PUa1) and an energetic copolyurea network (PUa2). 1 H and 13 C nuclear magnetic resonance (NMR) and Fourier transform infrared spectroscopy (FTIR) confirm copolyurea synthesis. PUa1 exhibited branching reactions commonly found in polyurea syntheses, and these side reactions were suppressed in PUa2 through use of a polyfunctional isocyanate. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) demonstrate the energetic IHE based polyurea preserves the energetic decomposition of the parent monomer LLM-105 in PUa1 (1203 J g −1 ) and PUa2 (687 J g −1 ), albeit with reduced thermal stability with peak decomposition temperatures of 235°C and 233°C, respectively. This work presents a new approach for generating energetic polymers from IHE cores with tunable energetic, thermal, and structural characteristics.

Chemistry↗
DOE OSTI2024

Polymer Layer-Accelerated CO 2 Absorption in Aqueous Amino Acid Solutions

Direct air capture (DAC) of CO 2 via solvent-based absorption is considered a promising negative-emission technology. However, the low concentration of CO 2 in the air and slow transport into the solvent make DAC notoriously challenging to implement without costly investments. In this study, we explore the fundamental role that the bulk and surface properties of CO 2 -permeable polymer membranes play in enhancing the efficiency of the solution sorption process in passive DAC of CO 2 . This work leverages various spectroscopic and computational studies to demonstrate that a hybrid system, comprising a reusable CO 2 -permeable polymer layer placed atop an aqueous amino acid (AA) solution, can outperform a pure aqueous AA system by 2-fold. Here we show how the enhanced solubility of CO 2 in the polymer layer can improve the transport of CO 2 into the aqueous phase, while the chemistry of the polymer can control the interfacial barrier for CO 2 permeation and the interfacial concentration of reactive AAs. The derived knowledge of the material properties achieved here can aid in the design of DAC systems with improved performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Compact in situ probe for magnetotransport measurements of 2D materials under variable tensile strain

The recent development of freestanding oxide membranes has opened new opportunities for strain engineering of transition metal oxides beyond values accessible in bulk samples. While a number of studies have been performed with fixed strain, the ability to dynamically control the strain state during measurement would be greatly enabling. To this end, we present an in situ uniaxial strain probe optimized for transport measurements of tensile-strained 2D or quasi-2D materials down to 2 K. Utilizing a flexible polyimide substrate as the stress transfer medium, our platform simplifies the sample preparation process and allows precise alignment of strain fields relative to the crystalline axes. An in situ optical microscope monitors the macroscopic strain state operando and makes it possible to complete an entire magnetotransport study at cryogenic temperatures under continuous strain variations. We demonstrate the capabilities of the probe on a freestanding LaNiO 3 membrane, where we induce tensile strain up to 8% and observe a corresponding strong transport anisotropy. In view of the rapid developments in low-dimensional materials synthesis and the plethora of novel quantum phenomena they exhibit, this strain probe provides general instrumentation for examining and controlling these properties via strain.

2D materials↗
DOE OSTI2025

Toward Thermally Stimuli-Responsive Polymeric Vesicles Fabricated by Block Copolymer Blends for Nanocarriers

Polymeric vesicles, characterized by enhanced colloidal stability, excellent mechanical properties, controllable surface functionality, and adjustable membrane thickness, are extremely useful in nano- and bio-technology for potential applications as nanosized carriers for drugs and enzymes. However, a few preparative steps are necessary to achieve a unilamellar vesicle with a narrow size distribution. Herein, we report the spontaneous formation of unilamellar polymeric vesicles with nanometer sizes (<50 nm), fabricated by simply mixing diblock copolymers (P(EO-AGE)(2K-2K) and P(EO-AGE)(0.75K-2K)) with differing hydrophilic mass fractions in aqueous solutions. Depending on the mixing ratio of block copolymers and the temperature, the block copolymer mixtures self-assemble into various nanostructures, such as spherical and cylindrical micelles, or vesicles. The self-assembled structures of the block copolymer mixtures were characterized by small-angle neutron scattering, resulting in a phase diagram drawn as a function of temperature and the mixing condition. Notably, the critical temperature for the micelle-to-vesicle phase transition can be easily controlled by altering the mixing conditions; it decreases with an increase in the concentration of one of the block copolymers.

block copolymers↗
NASA NTRS1998

[Synthesis and Characterization of a Sugar Based Electrolyte for Thin-film Polymer Batteries]

The work performed during the current renewal period, March 1,1998 focused primarily on the synthesis and characterization of a sugar based electrolyte for thin-film polymer batteries. The initial phase of the project involved developing a suitable sugar to use as the monomer in the polymeric electrolyte synthesis. The monomer has been synthesized and characterized completely. Overall the yield of this material is high and it can be produced in relatively large quantity easily and in high purity. The scheme used for the preparation of the monomer is outlined along with pertinent yields.

Source record↗
DOE OSTI2025

SBIR Phase I Final Technical Report LOW-COST, LIGHTWEIGHT DOPED POLYMER COATINGS FOR MICROELECTRONICS VIA 3D PRINTING Award Number DE-SC0025167 Prepared for U.S. Department of Energy, Office of Science, SC-1 For the Period July 22, 2024 – April 21, 2025 Report Date May 5, 2025 Submitted by Jun Wang, Ph.D., Principal Investigator Report Contributors Dr. Jun Wang, Dr. Charles Sosa

Explore the source record for details and available documents.

Wang, Jun [Radiation Monitoring Devices, Inc., Wat↗
NASA NTRS2009

Assessment of Composite Delamination Self-Healing Under Cyclic Loading

Recently, the promise of self-healing materials for enhanced autonomous durability has been introduced using a micro-encapsulation technique where a polymer based healing agent is encapsulated in thin walled spheres and embedded into a base polymer along with a catalyst phase. For this study, composite skin-stiffener flange debonding specimens were manufactured from composite prepreg containing interleaf layers with a polymer based healing agent encapsulated in thin-walled spheres. Constant amplitude fatigue tests in three-point bending showed the effect of self-healing on the fatigue response of the skin-stiffener flange coupons. After the cycling that created debonding, fatigue tests were held at the mean load for 24 hours. For roughly half the specimens tested, when the cyclic loading was resumed a decrease in compliance (increase in stiffness) was observed, indicating that some healing had occurred. However, with continued cycling, the specimen compliance eventually increased to the original level before the hold, indicating that the damage had returned to its original state. As was noted in a prevoius study conducted with specimens tested under monotonically increasing loads to failure, healing achieved via the micro-encapsulation technique may be limited to the volume of healing agent available relative to the crack volume.

O'Brien, T. Kevin↗
NASA NTRS2007

Nanoscale Subsurface Imaging of Nanocomposites via Resonant Difference-Frequency Atomic Force Ultrasonic Microscopy

A scanning probe microscope methodology, called resonant difference-frequency atomic force ultrasonic microscopy (RDF-AFUM), has been developed. The method employs an ultrasonic wave launched from the bottom of a sample while the cantilever of an atomic force microscope engages the sample top surface. The cantilever is driven at a frequency differing from the ultrasonic frequency by one of the contact resonance frequencies of the cantilever. The nonlinear mixing of the oscillating cantilever and the ultrasonic wave at the sample surface generates difference-frequency oscillations at the cantilever contact resonance. The resonance-enhanced difference-frequency signals are used to create amplitude and phase-generated images of nanoscale near-surface and subsurface features. RDF-AFUM phase images of LaRC-CP2 polyimide polymer containing embedded nanostructures are presented. A RDF-AFUM micrograph of a 12.7 micrometer thick film of LaRC-CP2 containing a monolayer of gold nanoparticles embedded 7 micrometers below the specimen surface reveals the occurrence of contiguous amorphous and crystalline phases within the bulk of the polymer and a preferential growth of the crystalline phase in the vicinity of the gold nanoparticles. A RDF-AFUM micrograph of LaRC-CP2 film containing randomly dispersed carbon nanotubes reveals the growth of an interphase region at certain nanotube-polymer interfaces.

Cantrell, Sean A.↗
DOE OSTI2024

Vapor Phase Infiltration of Titanium Oxide into P3HT to Create Organic–Inorganic Hybrid Photocatalysts

Herein, we report for the first time the use of vapor phase infiltration (VPI) to infuse conducting polymers with inorganic metal oxide clusters that together form a photocatalytic material. While vapor infiltration has previously been used to electrically dope conjugated polymers, this is the first time, to our knowledge, that the resultant hybrid material has been demonstrated to have photocatalytic properties. The system studied is poly(3-hexylthiophene-2,5-diyl) (P3HT) vapor infiltrated with TiCl 4 and H 2 O to create P3HT-TiO x organic–inorganic hybrid photocatalytic materials. X-ray photoelectron spectroscopy analysis shows that P3HT-TiO x VPI films consist of a partially oxidized P3HT matrix, and the infiltrated titanium inorganic is in a 4+ oxidation state with mostly oxide coordination. Upon visible light illumination, these P3HT-TiO x hybrids degrade methylene blue dye molecules. The P3HT-TiO x hybrids are 4.6× more photocatalytically active than either the P3HT or TiO 2 individually or when sequentially deposited (e.g., P3HT on TiO 2 ). On a per surface area basis, these hybrid photocatalysts are comparable or better than other best in class polymer semiconductor photocatalysts. VPI of TiCl 4 + H 2 O into P3HT makes a unique hybrid structure and idealized photocatalyst architecture by creating nanoscale TiO x clusters concentrated toward the surface achieving extremely high catalytic rates. The mechanism for this enhanced photocatalytic rate is understood using photoluminescence spectroscopy, which shows significant quenching of excitons in P3HT-TiO x as compared to neat P3HT, indicating that P3HT acts as a photosensitizer for the TiO x catalyst sites in the hybrid material. This work introduces a new approach to designing and synthesizing organic–inorganic hybrid photocatalytic materials, with expansive opportunities for further exploration and optimization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2000

The Athena Raman Spectrometer

Raman spectroscopy provides a powerful tool for in situ mineralogy, petrology, and detection of water and carbon. The Athena Raman spectrometer is a microbeam instrument intended for close-up analyses of targets (rock or soils) selected by the Athena Pancam and Mini-TES. It will take 100 Raman spectra along a linear traverse of approximately one centimeter (point-counting procedure) in one to four hours during the Mars' night. From these spectra, the following information about the target will extracted: (1) the identities of major, minor, and trace mineral phases, organic species (e.g., PAH or kerogen-like polymers), reduced inorganic carbon, and water-bearing phases; (2) chemical features (e.g. Mg/Fe ratio) of major minerals; and (3) rock textural features (e.g., mineral clusters, amygdular filling and veins). Part of the Athena payload, the miniaturized Raman spectrometer has been under development in a highly interactive collaboration of a science team at Washington University and the University of Alabama at Birmingham, and an engineering team at the Jet Propulsion Laboratory. The development has completed the brassboard stage and has produced the design for the engineering model.

Wang, Alian↗
NASA NTRS1997

Experimental Observations of PMMA Spheres Burning at Reduced Gravity

Polymer combustion is a very complicated process which involves the coupling of gas-phase combustion, melting, pyrolysis, and possible charring of the condensed phase. Although only a few studies on the combustion of a spherically shaped polymer have been conducted, there is renewed interest in the subject. At the Third International Microgravity Combustion Workshop, we presented a preliminary experimental plan and proposed an apparatus to study the combustion of a PolyMethylMethAcrylate (PMMA) sphere at reduced gravity. In this paper, we describe the experimental hardware in detail, summarize our observations since the last workshop, and describe future studies. The main objective is to determine the burning rate of PMMA spheres at reduced gravity under different ambient oxygen concentrations and total pressures. The dependence of the burning rate on the initial sphere diameter will be examined. It is anticipated that the simple spherical geometry in conjunction with reduced gravity will facilitate an assessment of the effect of condensed phase behavior on polymer burning processes and can be used as a means to test polymer combustion models.

Yang, Ji-Ann C.↗
NASA NTRS2002

Rotationally Molded Liquid Crystalline Polymers

Rotational molding is a unique process for producing hollow plastic parts. Rotational molding offers low cost tooling and can produce very large parts with complicated shapes. Products made by rotational molding include water tanks with capacities up to 20,000 gallons, truck bed liners, playground equipment, air ducts, Nylon fuel tanks, pipes, toys, stretchers, kayaks, pallets, and many others. Thermotropic liquid crystalline polymers are an important class of engineering resins employed in a wide variety of applications. Thermotropic liquid crystalline polymers resins are composed of semirigid, nearly linear polymeric chains resulting in an ordered mesomorphic phase between the crystalline solid and the isotropic liquid. Ordering of the rigid rod-like polymers in the melt phase yields microfibrous, self-reinforcing polymer structures with outstanding mechanical and thermal properties. Rotational molding of liquid crystalline polymer resins results in high strength and high temperature hollow structures useful in a variety of applications. Various fillers and reinforcements can potentially be added to improve properties of the hollow structures. This paper focuses on the process and properties of rotationally molded liquid crystalline polymers. This paper will also highlight the interactions between academia and small businesses in developing new products and processes.

Rogers, Martin↗
DOE OSTI2026

Polymer-iron oxide hybrid films for controlling electrokinetic properties

Electrokinetic phenomena at polymer-water interfaces are central to technologies for water purification, ion separations, and energy conversion, yet the ability to systematically control polymer surface charge and associated electrokinetic processes remains limited. Here, we demonstrate a simple liquid-phase infiltration (LPI) method to synthesize polymer–metal oxide hybrid films with controllable interfacial properties. Hydroxy-terminated poly(2-vinylpyridine) (P2VP-OH) brushes grafted to silicon substrates were infiltrated with iron nitrate from ethanolic solution, followed by low-temperature thermal treatment to convert the infiltrated precursor into iron oxide. Spectroscopic ellipsometry, X-ray photoelectron spectroscopy, and thermogravimetric analysis confirmed oxide incorporation and hybrid film formation without polymer degradation. Electrokinetic measurements reveal that the hybrid films acquire the electrokinetic properties of the infiltrated oxide, with concentration-dependent streaming potentials and surface conductivities closely matching those of pure iron oxide films. These results establish metal oxide infiltration as a scalable and low-cost strategy for controlling interfacial charge in polymer surfaces. The approach introduces new materials and design parameters for tailoring ion selectivity, transport, and energy conversion, with broad implications for the development of advanced membranes, electrokinetic harvesting devices, and polymer-supported oxide electrodes.

36 MATERIALS SCIENCE↗
NASA NTRS2002

Rotationally Molded Liquid Crystalline Polymers

Rotational molding is a unique process for producing hollow plastic parts. Rotational molding offers advantages of low cost tooling and can produce very large parts with complicated shapes. Products made by rotational molding include water tanks with capacities up to 20,000 gallons, truck bed liners, playground equipment, air ducts, Nylon fuel tanks, pipes, toys, stretchers, kayaks, pallets, and many others. Thermotropic liquid crystalline polymers are an important class of engineering resins employed in a wide variety of applications. Thermotropic liquid crystalline polymers resins are composed of semi-rigid, nearly linear polymeric chains resulting in an ordered mesomorphic phase between the crystalline solid and the isotropic liquid. Ordering of the rigid rod-like polymers in the melt phase yields microfibrous, self-reinforcing polymer structures with outstanding mechanical and thermal properties. Rotational molding of liquid crystalline polymer resins results in high strength and high temperature hollow structures useful in a variety of applications. Various fillers and reinforcements can potentially be added to improve properties of the hollow structures. This paper focuses on the process and properties of rotationally molded liquid crystalline polymers.

Rogers, Martin↗
DOE OSTI2024

Static and Dynamic Thermomechanical Properties of Phase-Separated Epoxy Networks with Tuned Microstructures

Here, polymerization-induced phase separation is a useful method for the construction of heterogeneous epoxy networks with properties exceeding their homogeneous counterparts. In this work, we examine the static and dynamic thermomechanical properties of phase-separated epoxy networks salient to their application as encapsulants. Three heterogeneous epoxy-amine networks with nano-, meso-, and macro-phase-separated morphologies comprised of hard and soft domains are compared to a rigid, unstructured network. The glass transition profiles of the heterogeneous networks are complex, spanning many decades in the frequency domain. The nanophase-separated morphology leads to higher coefficient of thermal expansion, yet surprisingly is characterized by reduced residual stress. Under both quasi-static and dynamic compression (strain rates of order 10 –3 and 10 3 s –1 , respectively), the nanophase-separated network also exhibits higher modulus and strength. In split-Hopkinson bar experiments, the energy dissipation characteristics of the epoxy networks were nearly identical. Curiously, however, the Hugoniot response of the macro-phase-separated network determined by ballistic shockwave analysis indicates a remarkable ability of this material to mitigate shockwave propagation in comparison to many homogeneous and heterogeneous polymer materials. Collectively, this work reveals several previously unreported phenomena with respect to structure–property relationships in phase-separated epoxy networks, illustrating the potential value of systematically tuned microstructures for optimization of application-specific physical properties.

36 MATERIALS SCIENCE↗
NASA NTRS1985

Role of long-wavelength degrees of freedom in the rod-to-coil transition in polymers

An analytical model is fitted to experimental data to show that rod-to-coil (RTC) transformations in single strand polymers (SSPs) are close to true phase transitions. The RTC are known to occur when the temperature or pH of a solvent in which the SSP is immersed is varied abruptly. Long wavelength degrees of freedom in the SSPs induce long range interactions in the molecule which lead to a first order phase transition. The Landau formalism suggests that a long-range ordered state can appear at a low temperature. A microscopic model of the phonon degrees of freedom identifies the nonzero temperature threshold at which the phase transition will occur. The phenomenology described is similar to a previous model for transitions in double-strand polymers.

Goldenfeld, N.↗