SEARCH · Search NASA

Results for “Polyolefin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Catalytic closed-loop recycling of polyethylene-like materials produced by acceptorless dehydrogenative polymerization of bio-derived diols

Petroleum-derived polyolefins exhibit diverse properties and are the most important and largest volume class of plastics. However, polyolefins are difficult to efficiently recycle or break down and are now a persistent global contaminant. Broadly replacing polyolefins with bio-derived and degradable polyethylene-like materials is an important yet challenging endeavour towards sustainable plastics. Here, in this study, we report a solution for circular bio-based polyethylene-like materials synthesized by acceptorless dehydrogenative polymerization from linear and branched diols and their catalytic closed-loop recycling. The polymerization and depolymerization processes utilize earth-abundant manganese complexes as catalysts. These materials exhibit a wide range of mechanical properties, encompassing thermoplastics to plastomers to elastomers. The branched diols, produced through a thiol-ene click reaction, can be polymerized to plastics with significantly enhanced tensile properties, toughness and adhesive properties. These materials could be depolymerized back to monomers through hydrogenation and were separatable with a monomer recovery of up to 99%, unaffected by the presence of dyes and additives. Overall, this system establishes a route to more sustainable plastics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Important Role of Ion Flux Regulated by Separators in Lithium Metal Batteries

Abstract Polyolefin separators are the most common separators used in rechargeable lithium (Li)‐ion batteries. However, the influence of different polyolefin separators on the performance of Li metal batteries (LMBs) has not been well studied. By performing particle injection simulations on the reconstructed three‐dimensional pores of different polyethylene separators, it is revealed that the pore structure of the separator has a significant impact on the ion flux distribution, the Li deposition behavior, and consequently, the cycle life of LMBs. It is also discovered that the homogeneity factor of Li‐ion toward Li metal electrode is positively correlated to the longevity and reproducibility of LMBs. This work not only emphasizes the importance of the pore structure of polyolefin separators but also provides an economic and effective method to screen favorable separators for LMBs.

25 ENERGY STORAGE↗

DOE OSTI2022

Catalytic Activation of Polyethylene Model Compounds Over Metal-Exchanged Beta Zeolites

Decomposition of polymers by heterogeneous catalysts presents a promising approach for reuse of waste plastics. Here, we demonstrated non-hydrogenative decomposition of model polyolefins over proton-form and metal (Cu, Ni) ion-exchanged beta zeolites at moderate temperatures (ca. 300 degrees C). Near complete polyolefin decomposition was observed in batch reactions monitored by thermogravimetric analysis, while decomposition at partial conversion was studied in flow reactions. Ni-exchanged zeolites produced H 2 at substantially higher rates (> 10x) than other catalysts while also uniquely resisting deactivation over time. Application of the delplot formalism offered insights into the reaction network for polyolefin decomposition over Ni/BEA, most notably that H 2 is solely a primary product. We deduce that H 2 production is catalyzed by activation of C-H bonds at ionic Ni sites, and H 2 prevents buildup of polyaromatic coke species in Ni-exchanged zeolites that deactivate Cu-exchanged and protonic zeolites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Depolymerization of Hydroxylated Polymers via Light-Driven C–C Bond Cleavage

The accumulation of persistent plastic waste in the environment is widely recognized as an ecological crisis. New chemical technologies are necessary both to recycle existing plastic waste streams into high-value chemical feedstocks and to develop next-generation materials that are degradable by design. Here, we report a catalytic methodology for the depolymerization of a commercial phenoxy resin and high molecular weight hydroxylated polyolefin derivatives upon visible light irradiation near ambient temperature. Proton-coupled electron transfer (PCET) activation of hydroxyl groups periodically spaced along the polymer backbone furnishes reactive alkoxy radicals that promote chain fragmentation through C–C bond β-scission. The depolymerization produces well-defined and isolable product mixtures that are readily diversified to polycondensation monomers. In addition to controlling depolymerization, the hydroxyl group modulates the thermomechanical properties of these polyolefin derivatives, yielding materials with diverse properties. Furthermore, these results demonstrate a new approach to polymer recycling based on light-driven C–C bond cleavage that has the potential to establish new links within a circular polymer economy and influence the development of new degradable-by-design polyolefin materials.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2026

Iron-Catalyzed Cross-[2 + 2] Cycloaddition of Butadiene and α,ω-Dienes for Ductile and Chemically Recyclable Poly(oligocyclobutanes)

Poly(divinyloligocyclobutanes) (pDVOCBs) are a distinct class of butadiene-derived, chemically recyclable polyolefins prepared from iron-catalyzed [2 + 2] cycloaddition followed by ruthenium-catalyzed ADMET polymerization. These polymers are highly crystalline, with high melting temperatures and unique rotator phases. The high degree of crystallinity in these materials not only leads to high stiffness over a broad temperature range but also results in brittle failure for polymers of modest molecular weights. Iron-catalyzed cross-[2 + 2] cycloaddition of butadiene and α,ω-dienes was accomplished, where the number of methylene units between the four-membered rings was systematically varied. Subsequent ADMET polymerization of the resulting telechelic oligomers provided a new class of chemically recyclable polyolefins that exhibit distinct thermomechanical properties. Specifically, methylene units induce changes in crystallinity that, in combination with the increased molecular weight, favored the formation of stable necks upon tensile deformation, with ∼10× enhanced ductility and improved toughness compared to pDVOCB. Through combined experimental and computational studies, the effects of methylene spacers on the crystal-to-rotator transition of the cyclobutane polymers were established. Ultimately, these methylene-modified cyclobutane polymers expand the range of properties and potential applications of this class of recyclable polyolefins.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Positional Isomer of P3HB by Stereoselective Polymerization of Racemic α-Methyl-β-propiolactone Delivers Polyethylene-like Properties

Biobased and biodegradable poly(3-hydroxybutyrolactone) (P3HB) has long been considered as a more sustainable alternative to petroleum-based, nonbiodegradable polyolefins, but its properties are far off from its polyolefin (polyethylene, PE, and polypropylene, PP) counterpart’s unique set of thermal (low T g below −20 °C and high T m > 100 °C) and mechanical (high ductility >350%) characteristics. Here, we report that a positional isomer of P3HB, poly(3-hydroxy-2-methylpropionate) (P3H2MP), synthesized by catalyst-controlled stereoselective polymerization of racemic α-methyl-β-propiolactone, can match that demanding set of thermomechanical properties of PE. In particular, isotactic-rich P3H2MP, readily synthesized under ambient conditions, reaches high M n close to one million Da, T g down to −25 °C, T m up to 115 °C, tensile strength up to 64 MPa, and toughness up to 131 MJ m –3 , thus mechanically outperforming PE while maintaining a comparable low T g and high T m combination. A P3H2MP-based triblock copolymer further widens the low-high temperature window from T g = −29 °C to T m = 186 °C, resembling those of PP. These results show that P3H2MP exhibits the unique combination of thermomechanical properties matching those of high-performance polyolefins.

Biopolymers↗

DOE OSTI2024

Non-equilibrium plasma co-upcycling of waste plastics and CO 2 for carbon-negative oleochemicals

Mechanical recycling and chemical upcycling by thermochemical reactions have been the major approaches for recycling end-of-life plastics. Herein, we report an electrified approach to upcycle waste plastics into carbon-negative commodity chemicals using greenhouse gas CO 2 as the oxidant and additional carbon source. In this non-equilibrium plasma process, waste polyolefins were oxidatively depolymerized by plasma-activated CO 2 to produce oleochemicals and hydrocarbon chemicals in a single-step process at high reaction rates. In addition, a mixture of CO 2 and a small amount of O 2 was employed as plasma gases to selectively produce fatty alcohols from polyolefins. Based on this atmospheric pressure, non-solvent, and non-catalyst process, up to 97.6% of fatty alcohols could be produced within minutes. In this article, the co-conversion approach was demonstrated using common polyolefins and real-world mixed waste plastics to obtain comparable results. The techno-economic analysis estimates the internal rate of return to be 42.2% and 43.5% for the plasma-based conversion of waste plastics, depending on the plasma gas composition. Lifecycle assessment indicates the global warming potential is between −3.33 and −3.07 kg CO 2e per kg of plastic.

42 ENGINEERING↗

DOE OSTI2024

Discovery and adaptation of microbes that degrade oxidized low-density polyethylene films

There is a growing interest in developing a methodology for effectively cleaving carbon–carbon (C–C) bonds in polymer backbones through bioconversion processes that utilize microorganisms and their enzymes. This upsurge of interest is driven by the goal of achieving a circular economy. Polyolefin post-consumer plastics are a substantial source of carbon, but the recycling potential is severely limited. Upcycling routes are needed for converting polyolefin post-consumer plastics into value-added products while concurrently mitigating adverse environmental effects. These materials contain carbon-based chemicals that can, in principle, serve as the feedstock for microbial metabolism. Some microbes have been reported to grow on polyolefin plastics, but the rate of biodegradation is insufficient for industrial processes. In this study, low-density polyethylene (LDPE) films were subjected to two mild ozone-based oxidation treatments, which facilitated biodegradation. The degree of oxidation was determined by Fourier transform infrared spectroscopy via analysis of the carbonyl index (1,710/1,460 cm −1 ), which ranged from 0.3 to 2.0, and also via analysis of the carboxylic acid content. Following oxidation of the films, studies were conducted to investigate the ability of a panel of polyvinyl alcohol-degrading microbes to degrade the oxidized films. A defined minimal medium was used to cultivate and assess microbial growth on the oxidized films. Following 45 days of cultivation, the most effective strains were further cultivated up to three additional generations on the oxidized film substrates to improve their ability to degrade the oxidized LDPE films. After these enrichments, we identified a strain from the third generation of Pseudomonas sp. Rh926 that exhibited significant cell growth and reduced the oxidized LDPE film mass by 25% in 30 days, demonstrating an enhanced capacity for degrading the oxidized LDPE films.

Adaptation↗

DOE OSTI2026

BOTTLE: Hybrid Chemical-Mechanical Separation and Upcycling of Mixed Plastic Waste

The main objective of this project is to develop a hybrid mechanical-chemical recycling technology for multilayered and laminated plastics. We aimed to separate and upcycle up to more than 80% of the two main constituents of such structures, polyolefins and polyesters, for a significantly lower cost and at higher energetic efficiency and much larger throughputs than chemical recycling. At the end of the project, the team was able to: a) Develop an extrusion-based separation technology that resorts to polyester depolymerizaton and extraction and allows for more than 90% of the polyester to be separated in the melt from the main polyolefin stream. b) Depolymerize the separated PET to more than 90%, which facilitates its posterior repolymerization and guarantees its retention in the polymer value-chain. c) Develop a zeolite-induced extrusion-based technology able to conduct continuous catalytic cracking of polyolefins, including highly contaminated PCR streams, at temperatures as low as 350 OC. d) Show, using LCA/TEA analysis that the two technologies are much more advantageous techno-economically and over the material’s life cycle than existing recycling technologies.

36 MATERIALS SCIENCE↗

DOE OSTI2024

N 2 O deconstruction of polycyclooctene to generate carbonyl-functionalized macromonomers

Deconstruction of polyolefins into functionalized macromonomers presents a compelling strategy for polyolefin upcycling by creating macromonomers through dehydrogenation/depolymerization. We show that nitrous oxide (N 2 O), a greenhouse gas waste product from the production of nylon, mediates the deconstruction of polycyclooctene (PCOE) and generates carbonyl-functionalized macromonomers. Carbonyl incorporation and macromonomer molar mass were well controlled by reaction time, and subsequent hydrogenation readily removed residual carbon-carbon double bonds. Here, we also demonstrated that the reaction could progress efficiently with substrates of moderate levels of unsaturation, closely mimicking partially dehydrogenated polyethylene. Such carbonyl-functionalized macromonomers could serve as feedstock for preparing vitrimers and other functional polymers.

36 MATERIALS SCIENCE↗

DOE OSTI2020

BACKFLIP Project: Determination of BACKsheet Material Properties: A Comparison of Market-Benchmark Technologies to Novel Non-Fluoro-Based Co-Extruded Backsheet Materials and Their Correlation and Impact on PV Module Degradation Rates

Quantifying degradation rate of backsheets will help procuring materials for 30+ years. Today most backsheets on the market have a laminated PET core; polyolefin materials may provide better properties for backsheets (barrier to water, mechanical properties through UV and hydrolytic environments, etc.). End-of-life regulations may require fluorine-free backsheet products in future global markets. Parametrized equation predicting the service life of backsheets, and validated by both lab and outdoor extensive testing. Technical and commercial confidence to the entire value chain: from backsheet and module manufacturers to the downstream community (IPP, banks, developers) that materials of higher quality can help reduce finance costs, therefore driving down LCOE. A fast track PV module market adaptation for novel high-quality materials, such as co-extruded polyolefin-core backsheets, by obtaining unbiased durability data.

14 SOLAR ENERGY↗

DOE OSTI2023

Rapid Phase Transitions of Thermotropic Glycolipid Quasicrystal and Frank‐Kasper Mesophases: A Mechanistic Rosetta Stone

Abstract Experimental results are presented that serve to lower the barrier for developing the science and technology of non‐classical thermotropic glycolipid mesophases, which now include dodecagonal quasicrystal (DDQC) and Frank–Kasper (FK) A15 and σ mesophases that can be produced under mild conditions from a versatile class of sugar‐polyolefin conjugates. By employing “alloys” comprised of mono‐ and disaccharide‐polyolefin conjugates, and optionally with vitamin E as a small molecule phase modulator, we report the spontaneous formation of stable A15 mesophases at ambient temperature. We further document a rich thermotropic phase map that includes DDQC, A15, and σ mesophases of tunable periodicity that are connected through rapid thermotropic phase transitions as a function of increasing temperature in the order: liquid‐like packing (LLP)→DDQC → A15→σ→ disorder. This first direct observation of a rapid thermotropic A15→σ phase transition provides support for a diffusionless martensitic process proceeding through strain‐induced introduction of planar defects into the A15 lattice.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Rapid Phase Transitions of Thermotropic Glycolipid Quasicrystal and Frank‐Kasper Mesophases: A Mechanistic Rosetta Stone

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2025

Oxidation of n-alkanes using TS-1 and H 2 O 2 : Effects of chain length and solvents

The selective oxidation of n-C 8 H 18 , n-C 12 H 26 , n-C 16 H 34 , n-C 20 H 42 , and n-C 36 H 74 was studied with a goal of using these as models to provide insight into how to functionalize polyolefins. Reactions were carried out using a TS-1 catalyst and H 2 O 2 in a batch reactor with different cosolvents, including methanol, acetone, acetonitrile, methyl ethyl ketone, and methyl butyl ketone. Rates decreased with increasing alkane size, possibly due to the reduced solubility of larger alkanes into the water-rich phases. Cosolvents that promote the partitioning of alkanes in the aqueous phase increased the rates. 1 H NMR spectroscopy demonstrated that ketones were the primary products, although some alcohols also formed. There was preferential reaction at the 2 position in the alkanes, but reaction at central carbons was also observed. The results of this study suggest strategies for using this catalytic chemistry to functionalize polyolefins.

Alkane oxidation↗

DOE OSTI2025

Capture of volatile RuO 4 from oxidized simulated used nuclear fuel solutions

Ruthenium is a challenging fission product in used nuclear fuel (UNF) reprocessing due to its complex redox chemistry, variable speciation in nitric acid, partial extractability, and volatility. This work presents a strategy for Ru removal based on the volatilization of RuO 4 using the strong oxidant sodium bismuthate, followed by RuO 2 deposition onto various substrates. Among the materials tested, polymer-based substrates such as polyolefin wax film (Parafilm®), exhibited superior performance, achieving up to near-quantitative Ru removal from solution. After dissolution of the substrate, 99.6% of the Ru was recovered as RuO 2 . The deposition mechanism onto the polyolefin wax film involves both physisorption and chemical reaction through oxidative cleavage of olefinic bonds within the polymer. In contrast, on inorganic substrates such as Al foil, RuO 4 undergoes incomplete surface adsorption and reduction, as confirmed by FTIR and XPS analyses. This approach remains effective under conditions of simulated oxidation of UNF solutions, selectively removing Ru while leaving other fission products in solution. As a result, capture of RuO 4 offers a practical and efficient strategy for ruthenium decontamination and recovery, offering a route for integration into existing UNF reprocessing flowsheets to enhance overall process safety and performance.

Ruthenium↗

DOE OSTI2023

PV encapsulant formulations and stress test conditions influence dominant degradation mechanisms

Polyethylene-based poly(ethylene-co-vinyl acetate) (EVA), polyolefin elastomer (POE), and thermoplastic polyolefin (TPO) are common polymer candidates for photovoltaic (PV) module encapsulants. The choice of encapsulant must be carefully considered in novel module designs, such as bifacial glass/glass laminates, to limit performance degradation through loss of optical transmittance, mechanical integrity, and corrosion - as well as potential-induced degradation. Encapsulant quality and resilience against environmental stressors are readily influenced by the additives in the encapsulant formulation. Here, we show that, the changes in optical transmittance after UV aging result from the discoloration caused by interactions between additives, and optical scattering from changes in the polymer crystal structure. We observed competing cross-linking and chain scission mechanisms, with their kinetics influenced by the presence of oxygen and elevated temperatures. Increasing chamber temperatures from 55 °C to 85 °C during the UV stress test amplified encapsulant discoloration and promoted polymer cross-linking, causing severe, irreversible damage that remains to be proven field relevant. Damp heat aging was found to be insufficient to produce significant encapsulant degradation; however, combining stress tests sequentially allowed detection of further degradation beyond the limitations of the damp heat test alone. Appropriate degradation screening methods are necessary to uncover potential encapsulant weaknesses.

14 SOLAR ENERGY↗

DOE OSTI2023

Influence of Pore Length on Hydrogenolysis of Polyethylene within a Mesoporous Support Architecture

Due to the plastic waste crisis, selective chemical upcycling of polyolefins into value-added products is a topic of intense interest, demanding polymer deconstruction processes that afford control over the product chain lengths. Recently, a catalytic architecture was synthesized in which a polyolefin melt infiltrates a porous support, and its chains are cleaved by a metal nanoparticle catalyst at the bottom of the pores, yielding a narrow distribution of alkane products. Although the influence of various parameters of these catalytic materials, including the effects of the nanoparticle size and pore diameter on product chain length, has been examined before, here, we investigate the role of the pore length in the cleavage process through the first study that combines catalytic hydrogenolysis and coarse-grained modeling to gain insights not available by experiment alone. We show that the pore length can permit control over the average product length with qualitative agreement between experiment and simulation. In conclusion, we go beyond this observation to uncover the dynamic phenomenon responsible for the pore-length dependence of the cleavage products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Mechanistic Insights into Processive Polyethylene Hydrogenolysis through In Situ NMR

Chemical polymer upcycling by processive catalysts is a promising plastic waste remediation strategy, with the capability of producing selective, high-value products from waste plastics with minimal energy input. We previously designed a novel processive catalyst with a mesoporous SiO 2 shell/Pt nanoparticle/SiO 2 core architecture (mSiO 2 /Pt/SiO 2 ) that deconstructs polyolefins within narrow pores. Here, in this paper, we elucidate the mechanism of processive polyolefin hydrogenolysis using in situ magic-angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy and coarse-grained molecular dynamics simulations. We observe that most polyethylene–Pt interactions do not lead to C–C bond cleavage but rather to the release of the polymer via a dehydrogenation–rehydrogenation cycle. The porous architecture increases the likelihood that a released polymer is later cleaved and enables the catalyst to perform multiple successive cleavages to the same polymer chain. Both experiment and simulation show that the extent of processivity is strongly correlated with the length of the pores, with longer pores leading to a higher processivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗