Search NASA⌕ Search

SEARCH · Search NASA

Results for “Positioning System”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Cislunar Autonomous Positioning System Technology Operations and Navigation Experiment (CAPSTONE): Pathfinder for Artemis Gateway

The Cislunar Autonomous Positioning System Technology Operations and Navigation Experiment (CAPSTONE) mission was developed by NASA in collaboration with Advanced Space, LLC of Westminster, Colorado. This technology demonstration mission serves as a pathfinder for near rectilinear halo orbit (NHRO) operations around the Moon. The NHRO, (Perilune = 3,200 km; Apolune = 70,000 km) is the intended orbit for NASA’s Artemis Gateway, a small, human-tended space station planned for lunar orbit. The CAPSTONE mission will validate simulations and confirm operational planning for Gateway while also validating performance of navigation and stationkeeping requirements for Gateway’s Power and Propulsion Element. Therefore, this mission will provide operational experience to NASA, commercial, and international missions for operations in a demanding orbital regime. This presentation accompanies the paper of the same title.

Elwood F Agasid↗
NASA NTRS1987

Enhanced global positioning system delta-range processing

A circuit is shown which utilizes signals transmitted from global positioning system satellites to create change in phase signals. The change in phase signals are measured over a predetermined time interval, one· second, and stored. The stored signals are applied to a Kalman filter and back to the storage unit so that each one second time interval includes the information from all previous time intervals. This accumulated information is referred to as accumulated Delta-Range information which permits a more rapid determination of position by the circuit.

Alison Brown↗
NASA NTRS1991

Versatile, low-cost, computer-controlled, sample positioning system for vacuum applications

A versatile, low-cost, easy to implement, microprocessor-based motorized positioning system (MPS) suitable for accurate sample manipulation in a Second Ion Mass Spectrometry (SIMS) system, and for other ultra-high vacuum (UHV) applications was designed and built at NASA LeRC. The system can be operated manually or under computer control. In the latter case, local, as well as remote operation is possible via the IEEE-488 bus. The position of the sample can be controlled in three linear orthogonal and one angular coordinates.

Vargas-Aburto, Carlos↗
NASA NTRS1994

Atmospheric pressure loading effects on Global Positioning System coordinate determinations

Earth deformation signals caused by atmospheric pressure loading are detected in vertical position estimates at Global Positioning System (GPS) stations. Surface displacements due to changes in atmospheric pressure account for up to 24% of the total variance in the GPS height estimates. The detected loading signals are larger at higher latitudes where pressure variations are greatest; the largest effect is observed at Fairbanks, Alaska (latitude 65 deg), with a signal root mean square (RMS) of 5 mm. Out of 19 continuously operating GPS sites (with a mean of 281 daily solutions per site), 18 show a positive correlation between the GPS vertical estimates and the modeled loading displacements. Accounting for loading reduces the variance of the vertical station positions on 12 of the 19 sites investigated. Removing the modeled pressure loading from GPS determinations of baseline length for baselines longer than 6000 km reduces the variance on 73 of the 117 baselines investigated. The slight increase in variance for some of the sites and baselines is consistent with expected statistical fluctuations. The results from most stations are consistent with approximately 65% of the modeled pressure load being found in the GPS vertical position measurements. Removing an annual signal from both the measured heights and the modeled load time series leaves this value unchanged. The source of the remaining discrepancy between the modeled and observed loading signal may be the result of (1) anisotropic effects in the Earth's loading response, (2) errors in GPS estimates of tropospheric delay, (3) errors in the surface pressure data, or (4) annual signals in the time series of loading and station heights. In addition, we find that using site dependent coefficients, determined by fitting local pressure to the modeled radial displacements, reduces the variance of the measured station heights as well as or better than using the global convolution sum.

Vandam, Tonie M.↗
NASA NTRS1979

The Global Positioning System and its application in spacecraft navigation

The paper presents an overview of the Global Positioning System (GPS) as well as a discussion of the user system parameters govering the design of a low-earth-orbit spacecraft GPS navigation system. A specific application, the Space Shuttle orbiter GPS navigation system, is discussed with particular attention given to its receiver/processor.

Van Leeuwen, A.↗
NASA NTRS1997

Predictive Attitude Estimation Using Global Positioning System Signals

In this paper, a new algorithm is developed for attitude estimation using Global Positioning System (GPS) signals. The new algorithm is based on a predictive filtering scheme designed for spacecraft without rate measuring devices. The major advantage of this new algorithm over traditional Kalman filter approaches is that the model error is not assumed to represented by an unbiased Gaussian noise process with known covariance, but instead is determined during the estimation process. This is achieved by simultaneously solving system optimality conditions and an output error constraint. This approach is well suited for GPS attitude estimation since some error sources that contribute to attitude inaccuracy, such as signal multipath, are known to be non-Gaussian processes. Also, the predictive filter scheme can use either GPS signals or vector observations or a combination of both for attitude estimation, so that performance characteristics can be maintained during periods of GPS attitude sensor outage. The performance of the new algorithm is tested using flight data from the REX-2 spacecraft. Results are shown using the predictive filter to estimate the attitude from both GPS signals and magnetometer measurements, and comparing that solution to a magnetometer-only based solution. Results using the new estimation algorithm indicate that GPS-based solutions are verified to within 2 degrees using the magnetometer cross-check for the REX-2 spacecraft. GPS attitude accuracy of better than 1 degree is expected per axis, but cannot be reliably proven due to inaccuracies in the magnetic field model.

Crassidis, John L.↗
NASA NTRS2016

The Deep-Space Positioning System Concept: Automating Complex Navigation Operations Beyond the Earth

There is no equivalent of GPS in “deep space,” that is beyond the Earth Moon system (and use of GPS beyond LEO and MEO is already problematic.) NASA has been awarded a patent on the concept of the “Deep-space Positioning System” (DPS) which is a self-contained instrument concept that would use in-situ observations to provide an automated and autonomous means of determining its position in the Solar System, and at least as important, its position relative to a target, whether that target is a planet, asteroid, moon or comet. In addition, the DPS system computes trajectory change parameters, as necessary to keep a spacecraft on a planned trajectory. Implementation options include the use of a radio receiver to receive a frequency beacon from a non-in-situ source for additional navigation information over and above that which can be provided by the cameras that are the principal data source of DPS. This paper discusses the DPS instrument concept, and its potential use in deep space.

Guinn, Joseph R.↗
NASA NTRS1992

GPS meteorology - Remote sensing of atmospheric water vapor using the Global Positioning System

We present a new approach to remote sensing of water vapor based on the Global Positioning System (GPS). Geodesists and geophysicists have devised methods for estimating the extent to which signals propagating from GPS satellites to ground-based GPS receivers are delayed by atmospheric water vapor. This delay is parameterized in terms of a time-varying zenith wet delay (ZWD) which is retrieved by stochastic filtering of the GPS data. Given surface temperature and pressure readings at the GPS receiver, the retrieved ZWD can be transformed with very little additional uncertainty into an estimate of the integrated water vapor (IWV) overlying that receiver. Networks of continuously operating GPS receivers are being constructed by geodesists, geophysicists, and government and military agencies, in order to implement a wide range of positioning capabilities. These emerging GPS networks offer the possibility of observing the horizontal distribution of IWV or, equivalently, precipitate water with unprecedented coverage and a temporal resolution of the order of 10 min. These measurements could be utilized in operational weather forecasting and in fundamental research into atmospheric storm systems, the hydrologic cycle, atmospheric chemistry, and global climate change.

Bevis, Michael↗
NASA NTRS1996

Evaluation of Two Computational Techniques of Calculating Multipath Using Global Positioning System Carrier Phase Measurements

Two computational techniques are used to calculate differential phase errors on Global Positioning System (GPS) carrier war phase measurements due to certain multipath-producing objects. The two computational techniques are a rigorous computati electromagnetics technique called Geometric Theory of Diffraction (GTD) and the other is a simple ray tracing method. The GTD technique has been used successfully to predict microwave propagation characteristics by taking into account the dominant multipath components due to reflections and diffractions from scattering structures. The ray tracing technique only solves for reflected signals. The results from the two techniques are compared to GPS differential carrier phase ns taken on the ground using a GPS receiver in the presence of typical International Space Station (ISS) interference structures. The calculations produced using the GTD code compared to the measured results better than the ray tracing technique. The agreement was good, demonstrating that the phase errors due to multipath can be modeled and characterized using the GTD technique and characterized to a lesser fidelity using the DECAT technique. However, some discrepancies were observed. Most of the discrepancies occurred at lower devations and were either due to phase center deviations of the antenna, the background multipath environment, or the receiver itself. Selected measured and predicted differential carrier phase error results are presented and compared. Results indicate that reflections and diffractions caused by the multipath producers, located near the GPS antennas, can produce phase shifts of greater than 10 mm, and as high as 95 mm. It should be noted tl the field test configuration was meant to simulate typical ISS structures, but the two environments are not identical. The GZ and DECAT techniques have been used to calculate phase errors due to multipath o the ISS configuration to quantify the expected attitude determination errors.

Gomez, Susan F.↗
NASA NTRS1980

NAVSTAR global positioning system applicability to the National Oceanic Satellite System

This report presents the results of a preliminary investigation into the potential for applying NAVSTAR Global Positioning System (GPS) user equipment to the spacecraft of the National Oceanic Satellite System (NOSS). Two widely different navigation goals for NOSS spacecraft are examined: one being moderate accuracy, real-time navigation utilizing the simplest of GPS receivers, and the other being precision vertical displacement measurement over limited arcs utilizing specialized GPS equipment, possibly with ground data processing.

Matchett, G. A.↗
NASA NTRS1991

Measuring earth orientation with the Global Positioning System

A globally distributed network of high-precision receivers which obtain data from the full Global Positioning System (GPS) configuration of 18 or more satellites may soon become an efficient and economical method for the rapid determination of short-term variations in earth orientation. A covariance analysis has been performed to evaluate the errors associated with GPS monitoring of earth orientation. Earth orientation parameters were modeled either as constants over observing windows of various lengths, or as stochastic process-noise variables. The sensitivity of earth orientation estimates to systematic errors in selected model parameters was also examined. GPS measurements appear to be highly competitive with those from other techniques, and have the potential to generate nearly continuous centimeter-level earth orientation information to aid both spacecraft navigation and the study of high-frequency earth orientation-related processes.

Freedman, Adam P.↗
NASA NTRS1997

Vector Observation-Aided/Attitude-Rate Estimation Using Global Positioning System Signals

A sequential filtering algorithm is presented for attitude and attitude-rate estimation from Global Positioning System (GPS) differential carrier phase measurements. A third-order, minimal-parameter method for solving the attitude matrix kinematic equation is used to parameterize the filter's state, which renders the resulting estimator computationally efficient. Borrowing from tracking theory concepts, the angular acceleration is modeled as an exponentially autocorrelated stochastic process, thus avoiding the use of the uncertain spacecraft dynamic model. The new formulation facilitates the use of aiding vector observations in a unified filtering algorithm, which can enhance the method's robustness and accuracy. Numerical examples are used to demonstrate the performance of the method.

Oshman, Yaakov↗
NASA NTRS1977

Diffusion coefficients estimated from turbulence data measured by the Metrac positioning system in Minneapolis field test

An analysis is presented of the tropospheric turbulence data obtained by the Metrac positioning system, a radio location system which employs the Doppler principle to track inexpensive expendable balloon-borne transmitters. A Minneapolis field test of the Metrac system provided one-second samples of transmitter frequency from balloons tracked by four ground stations for more than an hour. The derivation of diffusion coefficients from the turbulence data was conducted by two methods, yielding highly consistent results.

Gage, K. S.↗
NASA NTRS1998

Efficient and Optimal Attitude Determination Using Recursive Global Positioning System Signal Operations

In this paper, a new and efficient algorithm is developed for attitude determination from Global Positioning System signals. The new algorithm is derived from a generalized nonlinear predictive filter for nonlinear systems. This uses a one time-step ahead approach to propagate a simple kinematics model for attitude determination. The advantages of the new algorithm over previously developed methods include: it provides optimal attitudes even for coplanar baseline configurations; it guarantees convergence even for poor initial conditions; it is a non-iterative algorithm; and it is computationally efficient. These advantages clearly make the new algorithm well suited to on-board applications. The performance of the new algorithm is tested on a dynamic hardware simulator. Results indicate that the new algorithm accurately estimates the attitude of a moving vehicle, and provides robust attitude estimates even when other methods, such as a linearized least-squares approach, fail due to poor initial starting conditions.

Crassidis, John L.↗
NASA NTRS1971

A curve of growth determination of the f-values for the fourth positive system of CO and the Lyman-Birge-Hopfield system of N2.

The curve of growth method has been employed to determine f-values for the fourth positive system of CO and the magnetic dipole and electric quadrupole components of the Lyman-Birge-Hopfield system of N2. No significant dependence on r-centroid was found. The mean value of the ratio of the electric quadrupole to magnetic dipole f-values was 0.076.

Pilling, M. J.↗
NASA NTRS1978

Global positioning system for general aviation: Joint FAA-NASA Seminar

Programs to examine and develop means to utilize the global positioning system (GPS) for civil aviation functions are described. User requirements in this regard are discussed, the development of technologies in the areas of antennas, receivers, and signal processors for the GPS are examined, and modifications to the GPS to fit operational and design criteria are evaluated.

Source record↗
NASA NTRS2000

On Fast Post-Processing of Global Positioning System Simulator Truth Data and Receiver Measurements and Solutions Data

Post-Processing of data related to a Global Positioning System (GPS) simulation is an important activity in qualification of a GPS receiver for space flight. Because a GPS simulator is a critical resource it is desirable to move off the pertinent simulation data from the simulator as soon as a test is completed. The simulator data files are usually moved to a Personal Computer (PC), where the post-processing of the receiver logged measurements and solutions data and simulated data is performed. Typically post-processing is accomplished using PC-based commercial software languages and tools. Because of commercial software systems generality their general-purpose functions are notoriously slow and more than often are the bottleneck problem even for short duration experiments. For example, it may take 8 hours to post-process data from a 6-hour simulation. There is a need to do post-processing faster, especially in order to use the previous test results as feedback for a next simulation setup. This paper demonstrates that a fast software linear interpolation algorithm is applicable to a large class of engineering problems, like GPS simulation data post-processing, where computational time is a critical resource and is one of the most important considerations. An approach is developed that allows to speed-up post-processing by an order of magnitude. It is based on improving the post-processing bottleneck interpolation algorithm using apriori information that is specific to the GPS simulation application. The presented post-processing scheme was used in support of a few successful space flight missions carrying GPS receivers. A future approach to solving the post-processing performance problem using Field Programmable Gate Array (FPGA) technology is described.

Kizhner, Semion↗