Search NASA⌕ Search

SEARCH · Search NASA

Results for “Process Intensification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

A simple and practical process modeling methodology for pressure swing adsorption

Although many dynamic models exist for the design and simulation of pressure swing adsorption (PSA) processes, these models involve the solution of a complex system of coupled partial differential equations. Process engineers need a simple, practical, and yet robust short-cut model that helps decide whether to implement a PSA system in a process flowsheet. This work presents a “virtual” moving bed modeling methodology that considers only mass and energy balances and adsorption isotherms to describe the cyclic steady state behavior of PSA systems. Similar to tray efficiencies in distillation calculations, adsorption efficiencies are further introduced to account for system “non-ideality.” Finally, a lab-scale air separation system is used to illustrate the application of this modeling methodology.

42 ENGINEERING↗
DOE OSTI2020

Manufacturing Process Design of a Micro-Scale Liquid-Liquid Extractor and Multi-phase Separator

Advances in process innovation within the chemical process industry are impeded by the cost of producing new innovative components. In this paper, various manufacturing process routes were evaluated for scaling up a micro-scale liquid-liquid extractor and multi-phase separator capable of separating immiscible phases that are used for the extraction of a chemical product into a lower boiling point solvent to make downstream distillation easier. A manufacturing process design methodology was used to evaluate both photochemical machining and binder jetting as a means for producing the micropost arrays within the separator. Cost curves show that for a 0.3 mm deep micropost array, photochemical machining was found to be much cheaper than binder jetting. However, because binder jetting processes enable microposts with over 13 times higher depth-to-width aspect ratios, binder jetting was found to decrease the overall costs of the extractor/separator by more than half for a 500 barrel per day plant, with breakeven as low as 15 barrels per day. These economics were confirmed by building extractor/separator plates and characterizing them dimensionally and functionally. The binder jet plates were found to perform better than photochemical plates leading to the complete separation of the organic phase from water. The utilization of slower sintering cycles combined with surface grinding provided acceptable dimensional tolerances for the binder jet plates. Using pressurized air during depowdering improved the economics for the binder jetting process.

42 ENGINEERING↗
DOE OSTI2023

Intensification differentially affects the delivery of multiple ecosystem services in subtropical and temperate grasslands

Intensification, the process of intensifying land management to enhance agricultural goods, results in “intensive” pastures that are planted with productive grasses and fertilized. These intensive pastures provide essential ecosystem services, including forage production for livestock. Understanding the synergies and tradeoffs of pasture intensification on the delivery of services across climatic regions is crucial to shape policies and incentives for better management of natural resources. Here, we investigated how grassland intensification affects key components of provisioning (forage productivity and quality), supporting (plant diversity) and regulating services (CO 2 and CH 4 fluxes) by comparing these services between intensive versus extensive pastures in subtropical and temperate pastures in the USDA Long-term Agroecosystem Research (LTAR) Network sites in Florida and Oklahoma, USA over multiple years. Our results suggest that grassland intensification led to a decrease in measured supporting and regulating services, but increased forage productivity in temperate pastures and forage digestibility in subtropical pastures. Intensification decreased the net CO 2 sink of subtropical pastures while it did not affect the sink capacity of temperate pastures; and it also increased environmental CH 4 emissions from subtropical pastures and reduced CH 4 uptake in temperate pastures. Intensification enhanced the global warming potential associated with C fluxes of pastures in both ecoregions. Our study demonstrates that comparisons of agroecosystems in contrasting ecoregions can reveal important drivers of ecosystem services and general or region-specific opportunities and solutions to maintaining agricultural production and reducing environmental footprints. Further LTAR network-scale comparisons of multiple ecosystem services across croplands and grazinglands intensively vs extensively managed are warranted to inform the sustainable intensification of agriculture within US and beyond. Our results highlight that achieving both food security and environmental stewardship will involve the conservation of less intensively managed pastures while adopting sustainable strategies in intensively managed pastures.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Selective hydrodeoxygenation of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF) over carbon supported copper catalysts using isopropyl alcohol as a hydrogen donor

Selective hydrodeoxygenation (HDO) of 5-hydroxymethylfurfural to 2,5-dimethylfuran is of great importance. Here, we reveal a simple pathway for green and efficient HDO using readily available copper with in-situ hydrogen generation. A highly dispersed Cu/PBSAC catalyst consisting of small metallic Cu 0 nanoparticles carries out isopropyl alcohol (IPA) dehydrogenation and subsequent HDO of HMF. Density functional theory calculations reveal that the dehydrogenation of IPA is more favorable on Cu(211) with a lower energy barrier of ~0.6 eV. This facet exists in a higher ratio on nanosized catalysts. Batch reactions using Cu/PBSAC at 190 °C exhibited 91.9% HMF conversion and 71.7% DMF selectivity in 6 hr, and > 96% DMF yield in 10 hr. The mechanical strength of the carbon support is ideal for continuous processing for increased productivity; we demonstrate a > 90% DMF yield at 1/WHSV of 2.4 hr. The process demonstrated here can be integrated with upstream HMF separation utilizing carbon adsorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Temporal performance indicators for an integrated pilot-scale membrane distillation-concentrated solar power/photovoltaic system

Management of concentrate streams in inland applications has uncertain long-term environmental impacts. This study investigates an intensified solar-energy capture desalination system that integrates membrane distillation (MD) with a hybrid concentrated solar power (CSP)/photovoltaic (PV) collector to realize self-sustained zero-waste discharge for effective management of concentrate streams in inland and off-grid applications. The demonstration-scale CSP/PV system can produce up to 178 kWh of thermal energy and 4 kWh of electrical energy per day. The thermal and electrical energy from the CSP/PV system is directly supplied to the air gap MD (AGMD) pilot-scale system producing up to 288 L of distilled water per day. Experiments were performed on the hybrid AGMD-CSP/PV system to evaluate system performance under various operating conditions including AGMD and CSP flow rates, CSP system pre-heating, and AGMD vacuum pressure. Experimental results indicate that doubling the AGMD flow rate results in a 119% increase in thermal energy utilization and a 71% increase in distillate production. Compared to the winter months, operating the system in summer months when direct normal irradiance (DNI) is highest results in nearly double the distillate production (88 L in winter and 168 L in summer) and nearly three times the amount of thermal energy consumption (15 kWh in winter and 43 kWh in summer). Operating with vacuum resulted in a 34% increase in distillate production and allowing the thermal storage reservoir to preheat in the winter resulted in a 61% increase in distillate production. Altogether, experimental results highlight the tradeoff between distillate production and thermal and electrical energy production and consumption under various environmental conditions and the potential for AGMD-CSP/PV to be a stand-alone desalination system.

14 SOLAR ENERGY↗
DOE OSTI2022

Silica-encapsulated Fe 2 O 3 oxygen carriers for selective chemical looping combustion of hydrogen

Methane dehydroaromatization (MDA) combined with chemical looping (CL) combustion of hydrogen can overcome the MDA thermodynamic constraints conventionally limiting conversion. Development of selective hydrogen-oxidation oxygen carriers in the presence of aromatics in the CL is key to improve MDA performance in the coupled reaction system. Here, in this paper, we show that a novel oxygen carrier (silica-encapsulated Fe 2 O 3 with Fe/Si mole ratio of 1.2) yields high overall methane conversion (49%) and aromatics yield (up to 36%) during 4 h of recirculating a stream in the developed system. A silica layer encapsulating Fe 2 O 3 favors hydrogen transport and oxidation, preventing aromatics diffusing to the Fe 2 O 3 surface. A close physical contact between iron oxide particles and silica, and near complete encapsulation of the particles by the silica layer can facilitate hydrogen conversion without full depletion of iron oxides by forming iron silicates. The silica-encapsulated iron oxide particles can be reoxidized in air after depletion of its oxidative capacity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Continuous recovery of phosphoric acid and Rare-Earths containing particles from phosphoric acid sludge using a decanter centrifuge

Recovery of rare earth elements (REEs) from various industrial and natural streams currently draws significant attention in efforts to meet the demands of the manufacturing industry. Among many industrial byproducts and waste streams, phosphoric acid sludge could be one of the most economically feasible resources for the recovery of REEs because solid particles in the sludge contain relatively concentrated REEs, up to 3,000 ppm, while the liquid component of the sludge is valuable phosphoric acid (P 2 O 5 ) that can be recovered and returned to the main product. Due to high viscosity and large solids content (e.g., 30–40 %), however, this byproduct stream requires multistep separation and purification processes. In this study, a single-step process involving a continuous-flow decanter centrifuge (CFDC) was employed to investigate its feasibility for continuous solid/liquid separation from real phosphoric acid sludge. High centrifugal forces generated from up to 1500 G gravity acceleration separate solid particles from the sludge, generating a liquid-rich stream and a solids-rich stream at the exit of the CFDC. A single pass of phosphoric-acid sludge through the CFDC yielded 95 % liquid recovery and 90 % recovery of REEs-containing solids from 20 to 34 wt% solids-containing sludge. Finally, a reduced order model developed for the CFDC operation showed good agreement with experimental data, and preliminary technoeconomic analysis revealed potential process feasibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Data-driven simultaneous process optimization and adsorbent selection for vacuum pressure swing adsorption

Technologies for post-combustion carbon capture are essential for the reduction of greenhouse gas emissions to the atmosphere. However, they are still associated with high costs and energy consumption. Intensified processes for carbon capture have the potential to overcome these challenges due to their higher efficiency, lower capital cost, and increased operational flexibility. Here, this work investigates simultaneous optimization of process conditions and adsorbent selection for a modular Vacuum Pressure-Swing Adsorption system designed for CO 2 capture. Both surrogate-based Nonlinear Programming and Mixed-Integer Nonlinear Programming approaches are applied and compared in terms of computational efficiency and solution accuracy. Moreover, process performance results are examined by applying several data analytics techniques to gain insights into the material-process correlations. Data-driven classifiers and neural networks can accurately predict whether a material is likely to satisfy purity, recovery, and energy constraints when operated at optimal process conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Distributed sustainable metals production: opportunities for intensifying separations & alternative feedstocks

Meeting the increased demand for rare earth elements and beyond primary mined ore. Secondary sources like phosphogypsum, coal fly ash, used nuclear fuel, and electronic waste are concentrated sources of critical minerals. One strategy for a resilient supply chain is to decentralize sourcing and hydrometallurgical processing of metals. Rotating packed beds (RPBs) for solid-phase extraction and liquid-liquid extraction are gaining momentum for their ability to increase process throughput by 5-10x the state of the art. In conclusion, this review discusses advances in hydrometallurgical RPB processes and opportunities for implementation in distributed metals production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Impact of low-chemical storage pretreatment of loblolly pine bark on biochar from microwave pyrolysis

Forest product residues such as bark represent a low-cost, abundant feedstock for bioenergy, but their high ash and alkali and alkaline earth metal (AAEM) content limit thermochemical conversion efficiency. This study evaluates the use of low-severity chemical pretreatments during anaerobic storage to improve the performance of microwave pyrolysis for loblolly pine bark. Bark was treated with dilute sulfuric acid (0.1% and 1%, w/w) or sodium hydroxide (4%, w/w) and incubated anaerobically for one or two weeks to simulate in-pile biorefinery storage. The most effective treatment—1% H2SO4 for two weeks—reduced AAEM content by 35.7% and increased bio-oil yield by 11% compared to untreated controls, while also reducing pyrolysis gas production. In contrast, alkali treatment did not reduce AAEM levels and led to decreased bio-oil yields with increased gas formation. Although biochar yields were relatively stable across treatments, their physicochemical characteristics varied significantly. Acid-treated bark yielded biochars with higher carbon content, lower O/C and H/C ratios, greater surface area, and enhanced heating values. These improvements suggest that chemical pretreatment during storage can tailor biochar quality for specific end uses. Biochars produced under optimized conditions exhibited properties suitable for soil amendment, carbon sequestration, and solid fuel applications. This integrated approach—combining storage, mild chemical conditioning, and microwave pyrolysis—provides a viable pathway to enhance the value and sustainability of bark-derived bioenergy products.

09 - BIOMASS FUELS↗
DOE OSTI2023

Continuous caustic aqueous phase electrochemical reforming (CAPER) of ethanol for producing compressed hydrogen

Caustic Aqueous Phase Electrochemical Reforming (CAPER) of ethanol produces pure compressed H 2 at lower voltages, temperatures, and energy requirements than conventional electrolysis, while capturing carbonaceous products. The CAPER flow reactor consists of stainless steel endplates, stainless steel current collectors, and a Teflon flow field. The electrodes are prepared using commercial palladium nanoparticles on carbon support for the anode and platinum nanoparticles on carbon support for the cathode. The catalyst metal loading was 1 mgcm –2 on a 10cm 2 carbon cloth for both electrodes. Our CAPER reactor produces pure H 2 at 80bar and 80°C applying voltages at ≤0.5V. The only gas-phase product detected was H 2 and any carbonaceous products were contained in the liquid phase. The H 2 was produced with 97±4% faradaic efficiency. Further, operating at smaller electrode separation distances (4mm) and 80°C increased the current density. The highest lower heating value efficiency achieved was 28% at a flow rate of 0.05mLmin –1 and an applied voltage of 0.5V. The compressed H 2 was produced at ≤20 kWh kg –1 , which is much lower than electrolysis systems that require upwards of 50 kWh kg –1 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Direct aromatization of CO 2 via combined CO 2 hydrogenation and zeolite-based acid catalysis

Aromatics, including benzene, toluene, and xylenes (BTX), are essential chemical building blocks and are widely used as solvents, fuel additives, and polymers. With the recent development in CO 2 capture technologies and the progress made in producing H 2 using renewable energy, direct hydrogenation of CO 2 to aromatics via heterogeneous catalysis has emerged as a promising pathway to accomplish the production of aromatics with simultaneous utilization of waste CO 2 . In this review, we focus on recent advances in the nascent field of direct CO 2 aromatization, whereby tandem catalysts composed of CO 2 hydrogenation and aromatization functionalities are designed and deployed. We review two categories of tandem catalysts: catalysts integrating Fe-based/H-ZSM-5 components following RWGS (reverse water-gas shift of CO 2 to CO)-FT (Fischer-Tropsch synthesis of lower olefins)-aromatization pathways, and catalysts combining metal oxide/H-ZSM-5 domains following CO 2 to methanolaromatization pathways. The key parameters that determine the catalytic performance, such as the composition and structure of the Fe-based or metal oxide-based CO 2 conversion catalysts, the properties of H-ZSM-5, and the synergy between the two components, are analyzed to provide insights for the design of efficient tandem catalysts for CO 2 aromatization. In parallel, thermodynamic analyses, mechanistic studies, and density functional theory (DFT) computations for the relevant reaction routes and pathways are discussed to offer improved understanding of CO 2 activation, reaction intermediates, and product formation. In closing, the challenges and prospects for these tandem reactions are addressed to provide suggested paths forward for future research.

10 SYNTHETIC FUELS↗
DOE OSTI2022

Direct synthesis of branched hydrocarbons from CO 2 over composite catalysts in a single reactor

The thermocatalytic hydrogenation of CO 2 to hydrocarbons using a composite catalyst system in a single reactor under mild reaction conditions was investigated, by combining methanol synthesis, methanol dehydration and dimethyl ether homologation catalysts. High selectivity to isoparaffins, which are versatile precursors to sustainable aviation fuels, was achieved. The use of Cu/BEA significantly improved both the conversion of oxygenates and the hydrocarbon yield compared to HBEA by facilitating H-incorporation in the C-chain growth during the homologation reaction. A study of catalyst composition and reaction conditions revealed that nearly complete conversion of oxygenates was achieved using a stacked-bed configuration, providing high C-selectivity to C 4+ hydrocarbons (34.1% among all products and 95.5% in products excluding CO). The ability to completely convert oxygenates to hydrocarbons and achieve high CO-free selectivity to desired hydrocarbon products is unprecedented in CO 2 -to-hydrocarbon reports, and advantageous for downstream separation, as CO can be easily separated and recycled to improve overall hydrocarbon production in an integrated process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Extraction of valuable chemicals from food waste via computational solvent screening and experiments

About 1.3 billion tons of global food production end up in landfills and composting, leading to significant anthropogenic greenhouse gas (GHG) emissions. Extracting antioxidant and antimicrobial chemicals (flavonoids, phenolic acids, etc.) from food waste is an economically lucrative valorization strategy but is hindered by efficient solvent selection. Here we perform in silico high throughput screening to identify high solubility solvents for key phenolics and reveal more than 100+ higher-performing solvents than the traditional ethanol and methanol. Solubilities of nine shortlisted solvents are measured and found in reasonable agreement with model predictions. Analysis of the Conductor like Screening Model for Real Solvents (COSMO-RS) σ-profiles and Hansen Solubility Parameters reveals that polarity and hydrogen bonding make dimethylformamide (DMF) an excellent single solvent. We showcase the replacement of high-solubility toxic solvents with green mixtures and demonstrate the approach to potato peel waste. As a result, our work provides a blueprint for solvent selection and generates new insights into extraction from food waste.

09 BIOMASS FUELS↗
DOE OSTI2021

Molten-salt-mediated carbon dioxide capture and superequilibrium utilization with ethane oxidative dehydrogenation

Existing CO 2 -mediated oxidative dehydrogenation (CO 2 -ODH) of ethane has yet to demonstrate >60% single-pass CO yield due to the intrinsic equilibrium limitations. We report a unique approach with mixed molten carbonates as a reaction medium for CO 2 -ODH, which strategically partitions the CO 2 -ODH reactions into gas and molten-salt phases and facilitates integrated CO 2 capture from power plant flue gases. An 89% CO yield was achieved at 770°C, doubling the equilibrium limitation of conventional CO 2 -ODH. The high CO yield in turn enhances ethylene formation. Further characterizations confirmed that molten-salt mediated ODH (MM-ODH) proceeds through a gas-phase cracking and molten-salt mediated reverse water-gas-shift reaction pathway. Based on this understanding, thermodynamic analysis and ab initio molecular dynamics simulations were conducted to develop general principles to optimize the molten-salt reaction medium. Process analyses confirm that MM-ODH has the potential to be significantly more efficient for CO 2 capture and utilization than conventional CO 2 -ODH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Extraction of Furfural and Furfural/5-Hydroxymethylfurfural from Mixed Lignocellulosic Biomass-Derived Feedstocks

We present a combined in silico and experimental study on the extraction of furfural and 5-hydroxymethylfurfural (HMF) in aqueous–organic biphasic systems. We predict the liquid–liquid equilibria and furfural/HMF partition coefficients of over 2200 water-organic biphasic systems using the multiscale COSMO-RS model and measure experimentally single-component (furfural) and mixture (furfural and HMF) partition coefficients at room and dehydration reaction-relevant temperatures in 28 solvents. We find the experimental data to be within a factor of 2 from the COSMO-RS predictions. Even though furfural and HMF have chemical similarity, the slight differences in molecular structure render the separation of furfural easier by the supply of more solvents of higher partition coefficient for extraction. We leverage this molecular difference and experimentally demonstrate that with an additional extraction step, using dichloromethane or toluene, we can selectively extract furfural from furfural-HMF mixtures, which can coexist in lignocellulosic biomass dehydration products, despite their partition coefficients being generally correlated. We complement solvent selection criteria for biphasic lignocellulosic biomass processes with a simple mass balance extraction model for determining volume ratios in multistage extraction. Lastly, the molecular nature of the preferential furfural extraction is rationalized using COSMO-RS σ-profile analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗