Search NASA⌕ Search

SEARCH · Search NASA

Results for “Programmed burn”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Thruster Injector Faceplate Testing in Support of the Aerojet Rocket-Based Combined Cycle (RBCC) Concept

To satisfy RBCC rocket thruster requirements of high performance and a minimum amount of free hydrogen at plume boundary, a new impinging injector element using gaseous hydrogen and gaseous oxygen as the propellants has been designed. Analysis has shown that this injector design has potential to provide a high specific impulse (Isp) while minimizing the amount of free hydrogen that is available to be burned with incoming secondary flow. Past studies and test programs have shown that gas/gas-impinging elements typically result in high injector face temperatures due to combustion occurring close to the face. Since this design is new, there is no hot fire experience with this element. Objectives of this test program were to gain experience and hot fire test data on this new rocket thruster element design and injector faceplate pattern. Twenty-two hot fire tests were run with maximum mixture ratio (MR) and chamber pressure (Pc) obtained at 7.25 and 1,822 psia, respectively. Post-test scanning microscope (SEM) images show only slight faceplate erosion during testing. This injector element design performed well and can be operated at design conditions: (1) Pc of 2,000 psia and MR of 7.0 and (2) Pc of 1,000 psia and MR of 5.0.

Fazah, M. M.↗
NASA NTRS2014

Hybrid Wing Body Model Identification Using Forced-Oscillation Water Tunnel Data

Static and dynamic testing of the NASA 0.7 percent scale Hybrid Wing Body (HWB) configuration was conducted in the Rolling Hills Research Corporation water tunnel to investigate aerodynamic behavior over a large range of angle-of-attack and to develop models that can predict aircraft response in nonlinear unsteady flight regimes. This paper reports primarily on the longitudinal axis results. Flow visualization tests were also performed. These tests provide additional static data and new dynamic data that complement tests conducted at NASA Langley 14- by 22-Foot Subsonic Tunnel. HWB was developed to support the NASA Environmentally Responsible Aviation Project goals of lower noise, emissions, and fuel burn. This study also supports the NASA Aviation Safety Program efforts to model and control advanced transport configurations in loss-of-control conditions.

Murphy, Patrick C.↗
NASA NTRS2006

The Cutting Edge of High-Temperature Composites

NASA s Ultra-Efficient Engine Technology (UEET) program was formed in 1999 at Glenn Research Center to manage an important national propulsion program for the Space Agency. The UEET program s focus is on developing innovative technologies to enable intelligent, environmentally friendly, and clean-burning turbine engines capable of reducing harmful emissions while maintaining high performance and increasing reliability. Seven technology projects exist under the program, with each project working towards specific goals to provide new technology for propulsion. One of these projects, Materials and Structures for High Performance, is concentrating on developing and demonstrating advanced high-temperature materials to enable high-performance, high-efficiency, and environmentally compatible propulsion systems. Materials include ceramic matrix composite (CMC) combustor liners and turbine vanes, disk alloys, turbine airfoil material systems, high-temperature polymer matrix composites, and lightweight materials for static engine structures.

Source record↗
NASA NTRS2012

NASA Electronic Parts and Packaging (NEPP) Program

Recent Findings from Audits, New Technology Data Reviews a) Disabled Chip Burn-ins A recent audit for a QML device discovered that the chip was disabled during the static burn-in, thus it was not drawing any current. Recommendation: For new SMDs add a statement within the burn-in paragraphs stating that the parts shall be kept in their enabled state during the burn-in. b) Class Q 160-hr/125oC Burn-in This is being interpreted as a static burn-in (even for CMOS technology). Recommendation: Provide clarification in MIL-STD-883, Test Method 5004. c) At Frequency (Dynamic) Burn-ins Test equipment limitation is being cited for not doing burn-ins at the application frequency. Recommendation: The burn-in task group to discuss and provide guidance. When the SMD says that the part can be used at 200 MHz, then doing burn-in at 6 MHz (cited as burn-in equipment limitation frequency) is not going to be meaningful! d) Two Static Burn-ins Some manufacturers are doing electrical testing between the two static burn-ins, whereas others do electricals after completing both static burn-ins. Recommendation: Provide clarification in MIL-STD-883, Test Method 5004. e) Thermal Imaging For a device with hot spots, the thermal resistance, junction-to-case, would be much higher than the guidelines given in MIL-STD-1835. One of the suppliers used thermal imaging to find hot spots on the die. Recommendation: Assign a task group to evaluate the effectiveness of thermal imaging at the product development stage.

Class Y↗
NASA NTRS1974

Heliocentric interplanetary low thrust trajectory optimization program, supplement 1

The modifications and improvements made to the HILTOP electric propulsion trajectory optimization computer program up through the end of 1974 is described. New program features include the simulation of power degradation, housekeeping power, launch asymptote declination optimization, and powered and unpowered ballistic multiple swingby missions with an optional deep space burn. The report contains the new analysis describing these features, a complete description of program input quantities, and sample cases of computer output illustrating the new program capabilities.

Mann, F. I.↗
NASA NTRS2004

Trajectory Analysis

The Systems Analysis Branch performs trajectory and systems analysis for next-generation launch vehicle and space transportation technologies. Currently the branch is supporting the Project Prometheus with analysis of nuclear electric and nuclear thermal propulsion missions to a variety of destinations. Within Project Prometheus a proposed mission to Jupiter and three of the planet sized icy moons that orbit it is developing. The Jupiter Icy Moons Orbiter (JIMO) as the project is being called will enable detailed scientific investigation of Jupiter's moons Callisto, Ganymede, and Europa. These moons were choose to orbit for intensive study in particular because they are each believed to have water, energy, and organic material. The JIMO mission will utilize nuclear fission power and electric propulsion in order to allow the spacecraft to orbit the moons at close range for long durations of time. My assignment this summer was to assist in developing a trajectory analysis for the spacecraft system the Jupiter Icy Moons Orbiter by rewriting an inefficient Excel file into a more efficient FORTRAN program. This program has been created for use planning the trajectory of the Jupiter Icy Moons Orbiter Mission. The program uses a database of thousands of data points representing flight time, burn time, thrust, mass of the propellant used, final mass of the spacecraft, ratio of finals mass to initial mass, and change in velocity that a spacecraft experiences during each phase in the Jupiter Icy Moons Orbiter Mission. The trajectory program is capable of taking a specific user entered specific impulse (isp), final mass fraction, and thrust (P(sub J)/m0) and through the use of cubic splines to fit specific data curves, the program can locate the exact flight time linked to the user specified values of specific impulse and final over initial mass fraction. Currently, the database used by the program to calculate flight times for a given thrust is only for isps in the range of 2000 to 9000 seconds. Although the program is specific to the Jupiter Icy Moons Orbiter mission, it can be easily modified to fit any mission with a propulsion system expected isp range between 2000 and 9000 seconds. This program performs the same tasks as the old Excel file but in a more timely fashion. Finally, this FORTRAN program will replace the Excel file as the tool used to calculate trajectory properties in missions and will provide valuable data to mission analysts for years to come.

Burke, Laura M.↗
NASA NTRS1989

Cold Flow Determination of the Internal Flow Environment Around the Submerged TVC Nozzle for the Space Shuttle SRM

A series of subscale cold flow tests was performed to quantify the gas flow characteristics at the aft end of the Space Shuttle Solid Rocket Motor. This information was used to support the analyses of the redesigned nozzle/case joint. A portion of the thermal loads at the joint are due to the circumferential velocities and pressure gradients caused primarily by the gimbaling of the submerged nose TVC nozzle. When the nozzle centerline is vectored with respect to the motor centerline, asymmetries are set up in the flow field under the submerged nozzle and immediately adjacent to the nozzle/case joint. Specific program objectives included: determination of the effects of nozzle gimbal angle and propellant geometry on the circumferential flow field; measurement of the static pressure and gas velocities in the vicinity of the nozzle/case joint; use of scaling laws to apply the subscale cold flow data to the full scale SRM; and generation of data for use in validation of 3-D computational fluid dynamic, CFD, models of the SRM flow field. These tests were conducted in the NASA Marshall Space Flight Center Airflow Facility with a 7.5 percent scale model of the aft segment of the SRM. Static and dynamic pressures were measured in the model to quantify the flow field. Oil flow data was also acquired to obtain qualitative visual descriptions of the flow field. Nozzle gimbal angles of 0, 3.5, and 7 deg were used with propellant grain configurations corresponding to motor burn times of 0, 9, 19, and 114 seconds. This experimental program was successful in generating velocity and pressure gradient data for the flow field around the submerged nose nozzle of the Space Shuttle SRM at various burn times and gimbal angles. The nature of the flow field adjacent to the nozzle/case joint was determined with oil droplet streaks, and the velocity and pressure gradients were quantified with pitot probes and wall static pressure measurements. The data was applied to the full scale SRM thru a scaling analysis and the results compared well with the 3-D computational fluid dynamics computer model.

Whitesides, R. H.↗
NASA NTRS1991

Attitude profile design program

The Attitude Profile Design (APD) Program was designed to be used as a stand-alone addition to the Simplex Computation of Optimum Orbital Trajectories (SCOOT). The program uses information from a SCOOT output file and the user defined attitude profile to produce time histories of attitude, angular body rates, and accelerations. The APD program is written in standard FORTRAN77 and should be portable to any machine that has an appropriate compiler. The input and output are through formatted files. The program reads the basic flight data, such as the states of the vehicles, acceleration profiles, and burn information, from the SCOOT output file. The user inputs information about the desired attitude profile during coasts in a high level manner. The program then takes these high level commands and executes the maneuvers, outputting the desired information.

Source record↗
NASA NTRS1988

LLOFX earth orbit to lunar orbit delta V estimation program user and technical documentation

The LLOFX computer program calculates in-plane trajectories from an Earth-orbiting space station to Lunar orbit in such a way that the journey requires only two delta V burns (one to leave Earth circular orbit and one to circularize into Lunar orbit). The program requires the user to supply the Space Station altitude and Lunar orbit altitude (in km above the surface), and the desired time of flight for the transfer (in hours). It then determines and displays the trans-Lunar injection (TLI) delta V required to achieve the transfer, the Lunar orbit insertion (LOI) delta V required to circularize the orbit around the Moon, the actual time of flight, and whether the transfer orbit is elliptical or hyperbolic. Return information is also displayed. Finally, a plot of the transfer orbit is displayed.

Source record↗
NASA NTRS1969

Control jet placement on spacecraft

For efficient operation and configuration design of multijet spacecraft control systems methods of linear programming are used to select combinations of individual jet-burn times which produce the desired impulses. Minimum-fuel and fuel-time solutions are found.

Crawford, B. S.↗
NASA NTRS1987

Durability of composites

Fiber reinforced materials (composites) are considered very seriously for use in primary loadbearing structures. However, the pace at which they will actually be introduced into the structural designs of the future very much depends on the solution of a critical problem, which is the inability to predict the long term behavior of the material in a given service environment. The research and development of integrity evaluation and lifetime prediction schemes for composite materials is thus a burning issue. The information presented is part of an ongoing program which is directed toward and accelerated determination of the endurance limits of composite materials. Real-time testing is simply not feasible because enough integrity has to be designed into composite structures such that they have a service life which is often as long as twenty or thirty years.

Hiel, Clem C.↗
NASA NTRS1997

Recent Developments in Spray Combustion: Experiments and Modeling

The current research program under NASA sponsorship (NAG3-1688) focuses on the study of fundamental aspects of spray diffusion flames at normal and reduced gravity. The objective of this program is to bridge the gap between classical single droplet burning studies and practical spray flames, by using a variety of well-defined configurations, encompassing both laminar and turbulent spray diffusion flames. In the remainder of this article the main accomplishments in the two-year period (3-15-95 to 3-14-97) since the last International Microgravity Combustion Conference will be reviewed. A detailed account of the research activity is given in.

Gomez, Alessandro↗
NASA NTRS1987

Energy Recovery

The United States and other countries face the problem of waste disposal in an economical, environmentally safe manner. A widely applied solution adopted by Americans is "waste to energy," incinerating the refuse and using the steam produced by trash burning to drive an electricity producing generator. NASA's computer program PRESTO II, (Performance of Regenerative Superheated Steam Turbine Cycles), provides power engineering companies, including Blount Energy Resources Corporation of Alabama, with the ability to model such features as process steam extraction, induction and feedwater heating by external sources, peaking and high back pressure. Expansion line efficiency, exhaust loss, leakage, mechanical losses and generator losses are used to calculate the cycle heat rate. The generator output program is sufficiently precise that it can be used to verify performance quoted in turbine generator supplier's proposals.

Source record↗
NASA NTRS2015

Southern California Disasters II

The USDA Forest Service (USFS) has multiple programs in place which primarily utilize Landsat imagery to produce burn severity indices for aiding wildfire damage assessment and mitigation. These indices provide widely-used wildfire damage assessment tools to decision makers. When the Hyperspectral Infrared Imager (HyspIRI) is launched in 2022, the sensor's hyperspectral resolution will support new methods for assessing natural disaster impacts on ecosystems, including wildfire damage to forests. This project used simulated HyspIRI data to study three southern California fires: Aspen, French, and King. Burn severity indices were calculated from the data and the results were quantitatively compared to the comparable USFS products currently in use. The final results from this project illustrate how HyspIRI data may be used in the future to enhance assessment of fire-damaged areas and provide additional monitoring tools for decision support to the USFS and other land management agencies.

Nicholson, Heather↗
NASA NTRSDate not supplied

Assessing Alaskan boreal forest landcover affected by climate-wildfire interactions from ground truth surveys and NASA airborne remote sensing

Alaska’s boreal forest is facing unprecedented challenges under rapid climate warming (increasingly severe fires, droughts, pest/disease outbreaks) that may destabilize its function as a global carbon sink. Forests near Fairbanks may be especially vulnerable, impacting air quality and ecosystem services. We combined GT (ground truthing) with Airborne Visible InfraRed Imaging Spectrometer (AVIRIS-NG) images collected by the NASA Arctic-Boreal Vulnerability Experiment (ABoVE) program (2017-2019) to assess landcover change at five recently burned sites (2001-2019) of different fire severities and moisture regimes within 30 miles of Fairbanks. GT included tree seedling counts, understory % cover and >50% leaf canopy color assessment. 36 circular plots (1/30 ha radius) including 6 moderate to severely burned plots were selected across sites. 31 additional sites including 12 burned sites were geotagged in photos. AVIRIS images were processed from 29 spectral bands selected to identify changes in chlorophyll and water content. Images were segmented into natural boundaries (polygons) using ENVI 5.5 software. A spectral library of 8 AVIRIS bands with high between-class/low within-class variation was used in two random forest models to predict vegetation classes (model 1: 12 classes, model 2: 14 classes) in each AVIRIS scene, using 20% of the data as training data. Model 2 classified 20% more polygons overall, but only 42% of GT/geotagged polygons were correctly classified by both models. More forest sites were correctly classified (63%) than open vegetation (32%) or post-fire sites (46%). 50% of aspen forest and post-fire polygons were misclassified as shrubland. GT revealed that post-fire plots supported 134,000 (± 48,000) tree seedlings and saplings ha-1 (0.2 - 4 m height, 64% deciduous) versus 2500 (± 2100) shrubs ha-1 (1-6 m height). > 50% canopy browning was observed in conifer forest (8 plots) with no signs of insect infestation. Canopy herbivory > 50% (leaf miner, leaf beetle) and moose herbivory of tree bark was seen across aspen sites. Our study suggests: 1) low canopy vegetation presents challenges for improved landcover classification, and 2) aspen forest should be differentiated in vegetation maps which would aid in tracking herbivory.

Alaska↗
NASA NTRS1989

Computing Optimal Multiarc Trajectories

Optimal Multi-Arc Trajectories (OMAT) computer program designed to calculate solution to optimal-trajectory problem in cases of low thrust-to-weight ratios. Developed for two-body exoatmospheric problem with three degrees of freedom in inverse-square force field. Offers two different options: impulsive changes in velocity and finite burns with low thrust-to-weight ratios. Two distinct solutions available from program: optimal multi-impulse (OMI) solution and optimal multiburn (OMB) solution. Two solutions obtained separately, or results of OMI solution used to guess unknown parameters of OMB solution. Written for DEC VAX-series computer. Written completely in FORTRAN 77.

Jezewski, Donald J.↗
NASA NTRS1983

Flight testing the Digital Electronic Engine Control (DEEC) A unique management experience

The concept for the DEEC had its origin in the early 1970s. At that time it was recognized that the F100 engine performance, operability, reliability, and cost could be substantially improved by replacing the original mechanical/supervisory electronic control system with a full-authority digital control system. By 1978, the engine manufacturer had designed and initiated the procurement of flight-qualified control system hardware. As a precursor to an integrated controls program, a flight evaluation of the DEEC system on the F-15 aircraft was proposed. Questions regarding the management of the DEEC flight evaluation program are discussed along with the program elements, the technical results of the F-15 evaluation, and the impact of the flight evaluation on after-burning turbofan controls technology and its use in and application to military aircraft. The lessons learned through the conduct of the program are discussed.

Putnam, T. W.↗
NASA NTRS2017

Flame Retardant Fibers for Human Space Exploration - Past, Present, and Future

The National Aeronautics and Space Administration (NASA) has led in the development of unique flame retardant fibers for human spaceflight since the beginning of the Apollo program. After the Apollo 1 fire which killed Command Pilot Virgil I 'Gus' Grissom, Senior Pilot Edward H. White II, and Pilot Roger B. Chaffee from cardiac arrest on January 27, 1967, the accident investigators found severe third degree burns and melted spacesuits on the astronauts bodies. NASA immediately initiated an extensive research program aimed at developing flame retardant and flame resistant fibers for the enriched oxygen atmosphere of the Apollo crew cabin. Fibers are flame retardant when they have been modified by chemical and thermal treatments. Fibers are flame resistant when they are made of inherently flame resistant materials (i.e. glass, ceramic, highly aromatic polymers). Immediately after this tragic accident, NASA funded extensive research in specifically developing flame retardant fibers and fabrics. The early developmental efforts for human spaceflight were for the outer layer of the Apollo spacesuit. It was imperative that non-flammable fabrics be used in a 100% oxygen environment. Owens-Corning thus developed the Beta fiber that was immediately used in the Apollo program and later in the Space Shuttle program. Aside from the urgent need for protective fabrics for the spacesuit, NASA also needed flame retardant fabrics for both clothing and equipment inside the spacecraft. From the mid-1960s to the early 1980's, NASA contracted with many companies to develop inherently flame retardant fibers and flame retardant finishes for existing fibers. Fluorocarbons and aromatic polyamides were the polymers of great interest for the development of new inherently flame retardant fibers for enriched oxygen environments. These enriched environments varied for different space programs. For example, the Apollo program requirements were for materials that would not support combustion in a 70%/30% oxygen/nitrogen environment at 6.3 pounds per square inch (psi). The Skylab program flammability requirements were set at 80%/20% oxygen/nitrogen ratios at 5 psi. While many fibers produced under several NASA contracts were never used, a few have become commercial products. The intent of this paper is to present the developmental history of some of these new or modified textile fibers. These developmental efforts are presented at various levels of details depending on the source of the historical records.

Orndoff, Evelyne↗