Search NASA⌕ Search

SEARCH · Search NASA

Results for “Project Foundations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Urban Air Mobility Fleet Manager Gap Analysis and System Design

NASA’s Urban Air Mobility (UAM) Sub-Project is engaged in re-search to facilitate the introduction of air taxis into the US National Airspace System. Given the history of conventional aircraft operations, it is clear that dispatcher support will be required for UAM. This paper presents a gap analysis, system requirements, and a workstation design concept for the UAM dispatcher or Fleet Manager (FM) position. The gap analysis focuses on the differences be-tween the tasks of the airline dispatcher and those projected for the FM. FM system capabilities and data requirements are then presented as foundations for soft-ware development. An initial user interface concept is provided. The FM software uses a single, large display. The system supports prediction, monitoring, and task execution. This paper is intended to support FM software design for future air taxi systems.

Richard Mogford↗
NASA NTRS2024

Crew Health and Performance Integrated Data Architecture (CHP-IDA) Project

BACKGROUND: Future Human Exploration missions introduce a new paradigm as crews move further from the resupply and near real-time ground support typical of Low Earth Orbit missions today. Without immediate support from ground-based personnel, exploration crews will be more reliant on inflight data and technology to respond to emergencies and anomalies. A data architecture to support a new generation of technologies, employing advanced analytical and predictive modeling techniques, is needed to enable crew autonomy. OVERVIEW: The Crew Health and Performance Integrated Data Architecture (CHP-IDA) project funded by NASA’s Exploration Medical Integrated Product Team (XMIPT) is laying a foundation for future in-flight informatics by providing a back-end architecture for collecting, storing, and integrating multiple sources of data generated by and around the crew. CHP-IDA provides a platform for common data models and Application Programming Interfaces to access, integrate, process, and display CHP data (e.g., environmental, exercise, medical, sleep, performance, etc.). This will facilitate the increased situation awareness and decision support required by the crew and remote support of exploration missions. This presentation will describe the currently ongoing effort to develop and evaluate a path-to-flight concept of the CHP-IDA software and its core capabilities. Current integrations will be discussed, including analytics for Extravehicular Activity metabolic rate and data ingestion from a multi-functional integrated medical device. The presentation will also provide examples of scenarios used to demonstrate the CHP-IDA through human-in-the-loop test bed activities as well as examples of appropriate system performance metrics. DISCUSSION: Today, in-flight data is often siloed, unsynchronized, and largely inaccessible in real time. Many data sets require manual entry and/or data transfer between vehicles and the ground. These issues contribute to risks in supporting exploration medical capabilities. The CHP-IDA is a back-end data system providing core capabilities needed for timely and meaningful data insights across CHP domains to crew and remote personnel to enable increased crew autonomy. Future work includes collaboration with additional CHP domains, new technology integrations, and further demonstrations of the IDA within different vehicle and communication latency contexts. LEARNING OBJECTIVES 1. The audience will understand that the CHP-IDA is a back-end system, providing a platform to facilitate access, promote decision tools, and provide meaningful insights to crew and to remote stakeholders during exploration missions. 2. The audience will gain insight into human-centered research and activities used to discover CHP domain data needs and pain points and how this information is used to guide development of the IDA.

Exploration↗
NASA NTRS1998

Orbital Fluid Transfer System

An automated fluid and power interface system needs to be developed for future space missions which require on orbit consumable replenishment. Current method of fluid transfer require manned vehicles and extravehicular activity. Currently the US does not have an automated capability for consumable transfer on-orbit. This technology would benefit both Space Station and long duration satellites. In order to provide this technology the Automated Fluid Interface System (AFIS) was developed. The AFIS project was an advanced development program aimed at developing a prototype satellite servicer for future space operations. This mechanism could transfer propellants, cryogens, fluids, gasses, electrical power, and communications from a tanker unit to the orbiting satellite. The development of this unit was a cooperative effort between Marshall Space Flight Center in Huntsville, Alabama, and Moog, Inc. in East Aurora, New York. An engineering model was built and underwent substantial development testing at Marshall Space Flight Center (MSFC). While the AFIS is not suitable for spaceflight, testing and evaluation of the AFIS provided significant experience which would be beneficial in building a flight unit. The lessons learned from testing the AFIS provided the foundation for the next generation fluid transfer mechanism, the Orbital Fluid Transfer System (OFTS). The OFTS project was a study contract with MSFC and Moog, Inc. The OFTS was designed for the International Space Station (ISS), but its flexible design could used for long duration satellite missions and other applications. The OFTS was designed to be used after docking. The primary function was to transfer bipropellants and high pressure gases. The other items addressed by this task included propellant storage, hardware integration, safety and control system issues. A new concept for high pressure couplings was also developed. The results of the AFIS testing provided an excellent basis for the OFTS design. The OFTS meet the servicing requirements for ISS and could also provide the automated fluid and power interface system needed for on orbit consumable resupply of spacecraft into the new century.

Johnston, A. S., (Nick)↗
NASA NTRS1993

A multimedia adult literacy program: Combining NASA technology, instructional design theory, and authentic literacy concepts

For a number of years, the Software Technology Branch of the Information Systems Directorate has been involved in the application of cutting edge hardware and software technologies to instructional tasks related to NASA projects. The branch has developed intelligent computer aided training shells, instructional applications of virtual reality and multimedia, and computer-based instructional packages that use fuzzy logic for both instructional and diagnostic decision making. One outcome of the work on space-related technology-supported instruction has been the creation of a significant pool of human talent in the branch with current expertise on the cutting edges of instructional technologies. When the human talent is combined with advanced technologies for graphics, sound, video, CD-ROM, and high speed computing, the result is a powerful research and development group that both contributes to the applied foundations of instructional technology and creates effective instructional packages that take advantage of a range of advanced technologies. Several branch projects are currently underway that combine NASA-developed expertise to significant instructional problems in public education. The branch, for example, has developed intelligent computer aided software to help high school students learn physics and staff are currently working on a project to produce educational software for young children with language deficits. This report deals with another project, the adult literacy tutor. Unfortunately, while there are a number of computer-based instructional packages available for adult literacy instruction, most of them are based on the same instructional models that failed these students when they were in school. The teacher-centered, discrete skill and drill-oriented, instructional strategies, even when they are supported by color computer graphics and animation, that form the foundation for most of the computer-based literacy packages currently on the market may not be the most effective or most desirable way to use computer technology in literacy programs. This project is developing a series of instructional packages that are based on a different instructional model - authentic instruction. The instructional development model used to create these packages is also different. Instead of using the traditional five stage linear, sequential model based on behavioral learning theory, the project uses the recursive, reflective design and development model (R2D2) that is based on cognitive learning theory, particularly the social constructivism of Vygotsky, and an epistemology based on critical theory. Using alternative instructional and instructional development theories, the result of the summer faculty fellowship is LiteraCity, a multimedia adult literacy instructional package that is a simulation of finding and applying for a job. The program, which is about 120 megabytes, is distributed on CD-ROM.

Willis, Jerry W.↗
NASA NTRS1993

Production of long-term global water vapor and liquid water data set using ultra-fast methods to assimilate multi-satellite and radiosonde observations

During the next decade, many programs and experiments under the Global Energy and Water Cycle Experiment (GEWEX) will utilize present day and future data sets to improve our understanding of the role of moisture in climate, and its interaction with other variables such as clouds and radiation. An important element of GEWEX will be the GEWEX Water Vapor Project (GVaP), which will eventually initiate a routine, real-time assimilation of the highest quality, global water vapor data sets including information gained from future data collection systems, both ground and space based. The comprehensive global water vapor data set being produced by METSAT Inc. uses a combination of ground-based radiosonde data, and infrared and microwave satellite retrievals. This data is needed to provide the desired foundation from which future GEWEX-related research, such as GVaP, can build. The first year of this project was designed to use a combination of the best available atmospheric moisture data including: radiosonde (balloon/acft/rocket), HIRS/MSU (TOVS) retrievals, and SSM/I retrievals, to produce a one-year, global, high resolution data set of integrated column water vapor (precipitable water) with a horizontal resolution of 1 degree, and a temporal resolution of one day. The time period of this pilot product was to be det3ermined by the availability of all the input data sets. January 1988 through December 1988 were selected. In addition, a sample of vertically integrated liquid water content (LWC) was to be produced with the same temporal and spatial parameters. This sample was to be produced over ocean areas only. Three main steps are followed to produce a merged water vapor and liquid water product. Input data from Radiosondes, TOVS, and SSMI/I is quality checked in steps one and two. Processing is done in step two to generate individual total column water vapor and liquid water data sets. The third step, and final processing task, involves merging the individual output products to produce the integrated water vapor product. A final quality control is applied to the merged data sets.

Vonderhaar, T. H.↗
NASA NTRSDate not supplied

Bone Health: An Integrated Approach to Monitoring the Dynamic Net Bone Mineral Balance During 2-, 6- and 12-Month Missions Aboard the ISS

Spaceflight-induced bone loss is a significant health concern for astronauts which is only partially mitigated by established countermeasures such as resistive exercise, vitamin D supplementation, and nutritional support. These countermeasures have proven adequate for nominal 6-month missions aboard the ISS, but individual crewmembers may experience a degree of net bone loss which varies significantly. Estimates of whole-body bone mineral content (BMC) made using DXA show the mean change in BMC averages only -1 % during a nominal 6-month ISS mission. However, the observed range of interpersonal variation extends from + 1 % to -5 % per mission for crewmembers using ARED as a primary bone loss countermeasure [1]. This highlights two significant outstanding issues: (1) we currently cannot predict which crewmembers will experience greater or lesser extents of net bone loss during space flight; and (2) because of limited information regarding the dynamics of net bone loss during space flight, we cannot currently extrapolate the net bone loss rates observed during 6-month ISS missions to even longer duration missions envisioned for the Moon and Mars. The overall goal of the Bone Health project is to improve our understanding of how net bone mineral balance dynamically evolves during 2-12 months of spaceflight using integrated biochemical and calcium isotopic measurements. This will provide a foundation for estimating the possible range of changes in BMC that might be expected during even longer duration missions. As part of the Integrated 1-Year Mission Project, we aim to address these issues by (1) determining the time course of net whole-body bone mineral balance during 2-month, 6-month, and 12-month missions aboard the ISS, (2) examining the interpersonal variation in net bone loss/gain to determine whether this distribution is skewed with rare individuals experiencing above average rates of net bone loss, and (3) exploring possible predictors for individuals who will experience above or below average rates of net bone loss.

G W Gordon↗
NASA NTRS1995

The Center for Astrophysics in Antarctica

Nowhere on Earth are the infrared skies clearer, darker, or more stable than on the high Antarctic Plateau. At some wavelengths, Antarctic telescopes may be more than one to two orders of magnitude more efficient than at other sites. However, exploiting these advantages requires first addressing the formidable practical difficulties of working in the remote and frigid polar environment. This was the motivation for the Center for Astrophysical Research in Antarctica (CARA), one of twenty-five National Science Foundation Science and Technology Centers. At its inception, the Center organized its research into four projects. Three - AST/RO, COBRA, and SPIREX - address key problems in star formation, evolution of galaxies, and the distribution of matter in the early universe. They feature surveys which can be conducted effectively with moderate-size telescopes operated in a highly automated mode. They also explore the potential of the Antarctic Plateau for a broad range of astrophysical research over a spectral range extending from the near-infrared to millimeter wavelengths. A fourth, ATP, was created to obtain quantitative data on the qualities of the South Pole site and to plan for future scientific projects. During the next five years, AST/RO, COBRA, and SPIREX will become operational, and the Center will begin to build a second generation of telescopes which can address a broader range of problems and accommodate a larger community of users.

Pernic, Robert J.↗
NASA NTRS1999

Interstellar Initiative Web Page Design

This summer at NASA/MSFC, I have contributed to two projects: Interstellar Initiative Web Page Design and Lenz's Law Relative Motion Demonstration. In the Web Design Project, I worked on an Outline. The Web Design Outline was developed to provide a foundation for a Hierarchy Tree Structure. The Outline would help design a Website information base for future and near-term missions. The Website would give in-depth information on Propulsion Systems and Interstellar Travel. The Lenz's Law Relative Motion Demonstrator is discussed in this volume by Russell Lee.

Mehta, Alkesh↗
NASA NTRS2011

Investigating the Nature of and Methods for Managing Metroplex Operations

A combination of traffic demand growth, Next Generation Air Transportation System (NextGen) technologies and operational concepts, and increased utilization of regional airports is expected to increase the occurrence and severity of coupling between operations at proximate airports. These metroplex phenomena constrain the efficiency and/or capacity of airport operations and, in NextGen, have the potential to reduce safety and prevent environmental benefits. Without understanding the nature of metroplexes and developing solutions that provide efficient coordination of operations between closely-spaced airports, the use of NextGen technologies and distribution of demand to regional airports may provide little increase in the overall metroplex capacity. However, the characteristics and control of metroplex operations have not received significant study. This project advanced the state of knowledge about metroplexes by completing three objectives: 1. developed a foundational understand of the nature of metroplexes; 2. provided a framework for discussing metroplexes; 3. suggested and studied an approach for optimally managing metroplexes that is consistent with other NextGen concepts

Atkins, Stephen↗
NASA NTRS2003

The Integration of Fieldbus Devices to an Existing DCS

Existing analog strain gauge transducers and signal conditioners were replaced with new Foundation Fieldbus Transmitters in the Distributed Control System, DCS, at the NASA Glenn Research Center (GRC). The reasons for implementing this upgrade and an evaluation of the results of the project are the subjects of this paper. Problems and advantages with the original transducers and the newly installed transmitters are described and compared. Detail of the physical network layer between the Foundation Fieldbus Transmitters, Programmable Logic Controllers (PLCs), Multipurpose Micro-Processor (MMPs) and the operator workstations are illustrated. The complex nature of the facility and methods of future control of the associated processes are also discussed.

Sadhukhan, Debashis↗
NASA NTRS1979

Unsteady flow and dynamic response analyses for helicopter rotor blades

Research is presented on helicopter rotor blade vibration and on two and three dimensional analyses of unsteady incompressible viscous flow past oscillating helicopter rotor blades. A summary is presented of the two international research collaborations which resulted from the NASA project: the collaboration under the auspices of NATO between the University of Wisconsin-Milwaukee, University of Brussels, Belgium and the Aerodynamics Research Establishment in Goettingen, West Germany, and the collaboration under the auspices of the National Science Foundation between UWM and the University of Hamburg and the Ship Research Establishment in Hamburg, West Germany. A summary is given of the benefits from the NASA project to UWM, the College of Engineering and Applied Science, and the participants on the project.

Bratanow, T.↗
NASA NTRS2010

Fission Surface Power System Initial Concept Definition

Under the NASA Exploration Technology Development Program (ETDP) and in partnership with the Department of Energy (DOE), NASA has embarked on a project to develop Fission Surface Power (FSP) technology. The primary goals of the project are to 1) develop FSP concepts that meet expected surface power requirements at reasonable cost with added benefits over other options, 2) establish a hardwarebased technical foundation for FSP design concepts and reduce overall development risk, 3) reduce the cost uncertainties for FSP and establish greater credibility for flight system cost estimates, and 4) generate the key products to allow NASA decision-makers to consider FSP as a preferred option for flight development. The FSP project was initiated in 2006 as the Prometheus Program and the Jupiter Icy Moons Orbiter (JIMO) mission were phased-out. As a first step, NASA Headquarters commissioned the Affordable Fission Surface Power System Study to evaluate the potential for an affordable FSP development approach. With a cost-effective FSP strategy identified, the FSP team evaluated design options and selected a Preliminary Reference Concept to guide technology development. Since then, the FSP Preliminary Reference Concept has served as a point-of-departure for several NASA mission architecture studies examining the use of nuclear power and has provided the foundation for a series of "Pathfinder" hardware tests. The long-term technology goal is a Technology Demonstration Unit (TDU) integrated system test using full-scale components and a non-nuclear reactor simulator. The FSP team consists of Glenn Research Center (GRC), Marshall Space Flight Center (MSFC) and the DOE National Laboratories at Los Alamos (LANL), Idaho (INL), Oak Ridge (ORNL), and Sandia (SNL). The project is organized into two main elements: Concept Definition and Risk Reduction. Under Concept Definition, the team performs trade studies, develops analytical tools, and formulates system concepts. Under Risk Reduction the team develops hardware prototypes and conducts laboratory-based testing.

Source record↗
NASA NTRS1975

IUS/TUG Orbital Operations and Mission Support Study: Executive Summary - Volume 1

The space transportation system (STS) is discussed which will include a propulsive stage that is carried into low earth orbit by the space shuttle. Data were accumulated from the analyses of various stage concepts, operating modes, and projected missions (space tug systems studies, growth stage studies, engine studies, and critical area studies). The foundation formulated by these studies aided in establishing a tentative two-phase approach for the extension of the STS operating regime beyond the space shuttle including plane changes, higher orbits, geosynchronous orbits and beyond. The orbital operations study, was conducted to provide the generation and analysis of operational plans, requirement, and concepts for the utilization of these vehicles. Primary emphasis was placed on methods and techniques to provide a sound technical approach to operations at reduced cost for the STS mission period.

Source record↗
NASA NTRS1995

Development of Distant Learning Laboratory and Creation of Educational Materials

The Office of Education's fundamental goal is to disseminate information, mostly that which relates to science and technology. In this attempt, as I have observed, the office has many programs bringing both students and teachers to NASA Langley to expose them to the facilities and to teach them some about the scientific theory and about available modern technology. As a way of expanding the audience that can be reached, as the expense of bringing people in is limiting, Marchelle Canright has proposed establishing a center dedicated to researching and producing distant learning videos. Although distant learning through telecommunications is not a new concept, as many universities, colleges, and precollege level schools offer televised courses, the research in this field has been limited. Many of the standing distant learning broadcasts are simply recordings of teachers in classrooms giving lectures to their own students; they are not aimed at the television audience. In some cases the videos are produced without a Live-lecture atmosphere, but are still only classroom lectures. In either case, however, the full range of capabilities of video production are not being fully utilized. Methods for best relaying educational material have not been explored. Possibilities for including computerized images and video clips for the purpose of showing diagrams and processes, as well as examples in fitting cases, may add considerably to the educational value of these videos. Also, through Internet and satellite links, it is possible for remote students to interact with the teachers during televised sessions. These possibilities might, also, add to the effectiveness of distant learning programs. Ms. Canright's proposed center will be dedicated to researching these possibilities and eventually spreading the results to distant learning program managers. This is the project I was involved in over the summer. As implied, the center is still at the foundation stages. Ms. Canright has proposed four or five possible series that could be developed, each one aimed at a specific age group of students, or group of teachers. I was involved in the design of the series aimed at the youngest children, the Picture Book Science series. My involvement included proposing and researching topics, writing a lesson for the first show, writing the latter portion of the picture book story (the part including the scientific lesson), and illustrating the story. I also designed and collected the materials for the Learning Center's television studio set as well as finished the painting of the main backdrop panels.

Considine, Michelle↗
NASA NTRSDate not supplied

Towards a Common Basis of Comparison Across a Broad Trade Space of Mars Architecture Options

Humanity’s fascination with Mars predates the advent of space access, but the coming-of-age of rocket propulsion in the mid-20th century provided the technological foundation for considering a human visit to the red planet. Werner von Braun’s “The Mars Project,” published in 1953, is acknowledged as the first integrated Mars mission architecture plan [1]; since then, the reformulation and refinement of Mars architectures and system concepts has been an ongoing activity, as continued study and planning for human Mars missions is necessary in order to incorporate evolving mission objectives, technology advancements, and the increasing body of knowledge regarding human factors and the various environments of space. Historical Mars architecture studies represent an enormous body of work, but apart from a couple of high-level reviews [2], tapping into the findings and philosophies of these varied works entails a tedious and time-consuming individual effort. The unfortunate result of the widely scattered corpus of Mars architectures is that knowledge and understanding acquired in previous studies is not consistently and effectively brought to bear in the studies of today. The primary vehicle for bringing forward past learning is human recall, which both is imperfect and experiences significant attrition. An effort is underway in the Advanced Concepts Office (ACO) at NASA’s Marshall Space Flight Center to recapture and re-baseline previous architecture studies in order to establish a broad basis of comparison for future Mars architecture studies. Recapturing involves gathering and organizing data and documentation from previous efforts; re-baselining entails developing models capable of reproducing the original results, and then utilizing these models to implement a common set of ground rules and assumptions across the resulting trade space of Mars architecture options. This paper will present the methodology ACO is employing in performing this architecture meta-study, including a discussion on the challenges involved in re-baselining without losing the intent behind previous concepts. As part of this discussion some initial results will be presented, along with a list of studies targeted for inclusion. It is expected that the completed basis of comparison results will be presented as a follow-on paper in the following year.

Stephen James Edwards↗
NASA NTRSDate not supplied

LLMs and GenAI Tools to Depict Contributions of Human Systems to Spaceflight Tasks Execution

Recent advancements in Artificial Intelligence and Machine Learning (AI/ML) technologies, particularly Large Language Models (LLMs) capable of sophisticated syntax analysis, offer substantial potential in automating complex processes, thereby saving time and human resources. This study explores the development of an LLM-driven model designed to analyze and categorize a diverse set of Mars mission tasks into 18 predefined Human System Task Categories (HSTCs) based on their textual descriptions. As part of developing the Crew Health and Performance – Probabilistic Risk Assessment (CHP-PRA projects Performance Risk Model (PRisM) proof-of-concept, we established a framework to project performance scores from small-scale tests onto a preliminary list of Mars tasks. The foundation of our model was a comprehensive spreadsheet populated by NASA experts and clinicians, which detailed each Mars task alongside binary indicators of HSTC involvement. This dataset enabled the initial application of supervised ML, training and testing on existing HSTC labels. The HSTCs were originally defined from a medical system perspective, focusing on task impairments due to deteriorated human health. To expand our model's scope to include categories impacting performance, we face the challenge of generating binary labels (0 or 1) for new categories without pre-existing data. We address this by employing Generative AI (GenAI) software to determine whether a given task involved a new category by asking, "Does task A involve using category B?" We validate our approach by comparing the GenAI's binary classifications with the expert-provided labels for existing HSTCs. Notably, we utilize Ollama [4], a locally hosted GenAI tool that does not require cloud access, thus safeguarding NASA's proprietary data from unauthorized exposure. This study demonstrates the feasibility of leveraging cutting-edge AI tools to advance research, paving the way for automation and rapid decision-making in space exploration.

Mona Matar↗
NASA NTRS2003

Past, Present and Future Trends for NASA's EEE Parts Program

The foundation of NASA's Electrical, Electronic and Electromechanical (EEE) parts program is standardization. Standardization helps to reduce the number of unknown variables present as a project or program progresses; unknown variables equate to unknown risk. NASA spacecraft are usually 'one-offs' or at least part of a very short run, and every new part that is used represents a risk that has to be understood and mitigated as necessary. This equates directly to time and cost. Standardization of component parts is used to provide a foundation of known, dependable, qualified parts upon which a safe, reliable system can be built. In addition, the evaluation and selection of parts for the standard parts list unifies the activity under one group of experts rather than having engineers on each project overlapping and duplicating efforts. Thus, the project support engineers are able to concentrate on understanding and mitigating the risks for the non standard parts required to meet specific requirements of their project. Rapid technology change is producing conditions that make any form of parts-based standardization increasingly difficult, particularly the use of Commercial Off The Shelf (COTS) parts and assemblies. There are many complications to COTS-based standardization. COTS parts change rapidly and unpredictably, often have different characteristics fiom manufacturer to manufacturer, frequently are only available through distribution, have no universal specification and have variable and unpredictable radiation characteristics. This presentation will discuss some potential approaches to COTS parts standardization. Further into the future, in three to five years perhaps, the use of COTS boards and boxes will be extensive and standardization at these levels of assembly will be necessary. In five to ten years, most major spacecraft functions will probably be performed by COTS boards. How will this be achieved? What role will the parts engineer play, if any? This presentation will borrow from the lessons of the past to suggest some scenarios for the future.

Sampson, Michael J.↗