Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pure iron”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

The role of biomineralization in microbiologically influenced corrosion

Synthetic iron oxides (goethite, alpha-FeO.OH; hematite, Fe2O3; and ferrihydrite, Fe(OH)3) were used as model compounds to simulate the mineralogy of surface films on carbon steel. Dissolution of these oxides exposed to pure cultures of the metal-reducing bacterium, Shewanella putrefaciens, was followed by direct atomic absorption spectroscopy measurement of ferrous iron coupled with microscopic analyses using confocal laser scanning and environmental scanning electron microscopies. During an 8-day exposure the organism colonized mineral surfaces and reduced solid ferric oxides to soluble ferrous ions. Elemental composition, as monitored by energy dispersive x-ray spectroscopy, indicated mineral replacement reactions with both ferrihydrite and goethite as iron reduction occurred. When carbon steel electrodes were exposed to S. putrefaciens, microbiologically influenced corrosion was demonstrated electrochemically and microscopically.

Non-programmatic↗
NASA NTRS1994

Ferric chloride graphite intercalation compounds prepared from graphite fluoride

The reaction between graphite fluoride and ferric chloride was observed in the temperature range of 300 to 400 C. The graphite fluorides used for this reaction have an sp3 electronic structure and are electrical insulators. They can be made by fluorinating either carbon fibers or powder having various degrees of graphitization. Reaction is fast and spontaneous and can occur in the presence of air. The ferric chloride does not have to be predried. The products have an sp2 electronic structure and are electrical conductors. They contain first stage FeCl3 intercalated graphite. Some of the products contain FeCl2*2H2O, others contain FeF3 in concentrations that depend on the intercalation condition. The graphite intercalated compounds (GIC) deintercalated slowly in air at room temperature, but deintercalated quickly and completely at 370 C. Deintercalation is accompanied by the disappearing of iron halides and the formation of rust (hematite) distributed unevenly on the fiber surface. When heated to 400 C in pure N2 (99.99 vol %), this new GIC deintercalates without losing its molecular structure. However, when the compounds are heated to 800 C in quartz tube, they lost most of its halogen atoms and formed iron oxides (other than hematite), distributed evenly in or on the fiber. This iron-oxide-covered fiber may be useful in making carbon-fiber/ceramic-matrix composites with strong bonding at the fiber-ceramic interface.

Hung, Ching-Cheh↗
NASA NTRS1995

Ferrix Chloride-Graphite Intercalation Compounds Prepared From Graphite Flouride

The reaction between graphite fluoride and ferric chloride was observed in the temperature range of 300 to 400 C. The graphite fluorides used for this reaction have an sp(sup 3) electronic structure and are electrical insulators. They can be made by fluorinating either carbon fibers or powder having various degrees of graphitization. Reaction is fast and spontaneous and can occur in the presence of air. The ferric chloride does not have to be predried. The products have an sp(sup 2) electronic structure and are electrical conductors. They contain first-stage FeCl3 intercalated graphite. Some of the products contain FeCl2 (center dot) 2H2O, others contain FeF3, in concentrations that depend on the intercalation condition. The graphite intercalated compounds (GIC) deintercalated slowly in air at room temperature, but deintercalated quickly and completely at 370 C. Deintercalation is accompanied by the disappearance of iron halides and the formation of rust (hematite) distributed unevenly on the fiber surface. When heated to 400 C in pure N2 (99.99 vol%), this new GIC deintercalates without losing its molecular structure. However, when the compounds are exposed to 800 C N2, in a quartz tube, they lost most of their halogen atoms and formed iron oxides (other than hematite), distributed evenly in or on the fiber.

Hung, Ching-Cheh↗
NASA NTRS1975

Influence of gaseous hydrogen on the mechanical properties of incoloy 903

Solid specimens of the alloy Inconel 903 (iron based alloy) were exposed to four gaseous environments and high temperatures. Air, pure helium, pure hydrogen, and hydrogen and water vapor combined were the gaseous environments employed, and the temperature was 1400 F. Various mechanical property tests (low cycle fatigue, creep-rupture, tensile properties) were performed on the alloy. Results indicate that the hydrogen and water vapor environment cause a sharp reduction in the mechanical properties of the alloy. Photographs of the test equipment used and the microstructure of the tested alloy are included.

Source record↗
DOE OSTI2024

Aerogel-derived nickel-iron oxide catalysts for oxygen evolution reaction in alkaline media

Anion exchange membrane water electrolyzers (AEMWEs) can generate hydrogen with a pure water feed using noble metal-free catalysts. Here, the development of highly active and stable catalysts for oxygen evolution reaction (OER) is required for improving performance of AEMWEs systems. Ni-Fe (oxy)hydroxides show high OER catalytic activity in alkaline media, but typically have low surface area. In this work, we investigate a series of Ni-Fe oxides with high surface area and disordered morphology, obtained using an aerogel synthesis method. We evaluate the impact of different synthesis variables on the OER activity and demonstrate that heat treatment at high temperatures generates more ordered structure, resulting in a decrease in OER activity. Advanced characterization reveals that maintaining highly disordered and porous structure of the aerogel is essential to achieving high OER activity, as it enables the formation of highly OER-active lamellar structures of the catalyst.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Deposition and characterization of α-Fe 2 O 3 /Pd thin films for neutron reflectometry studies

Here, we report deposition of hematite/Pd thin films on silicon wafers via radio frequency (RF) magnetron sputtering and subsequent characterization for future in situ neutron reflectometry studies. Following deposition, the hematite/Pd thin films were characterized as prepared and after annealing in air for 2h at 400, 500, and 600 °C, respectively. Raman spectroscopy, grazing incidence x-ray diffraction, and neutron reflectometry (NR) were used to characterize the structure and chemical compositions of the thin films. The results indicate that pure α-Fe 2 O 3 (hematite) films were produced, free from other iron oxide phases and impurities. NR data reveal that one intermediate layer between the Pd layer and the hematite layer was formed during sputtering deposition processes. The fitted scattering length density (SLD) of the as-deposited hematite layer is 70% of the theoretical SLD value, indicating that the grains are loosely packed in the RF-deposited hematite films. After annealing at elevated temperatures, the hematite films show increased SLD values but remain comparable to that of preannealed.

36 MATERIALS SCIENCE↗
DOE OSTI2023

High-pressure electrical conductivity and elasticity of iron-bearing δ-AlOOH

Abstract The electrical conductivity and elasticity of deep hydrous phases are essential to constraining water distribution, as well as deciphering the origins of conductivity anomalies in the lower mantle. To uncover the impact of iron-bearing δ-AlOOH on the geophysical properties of the lower mantle, we carried out synchrotron X-ray diffraction and electrical conductivity measurements on δ-(Al0.52Fe0.48)OOH and (Al0.95Fe0.05)OOH in diamond-anvil cells at pressures up to 75 GPa at room temperature. A sharp volume reduction of ~6.5% was observed in δ-(Al0.52Fe0.48)OOH across the spin transition at 40.8–43.3 GPa, where its electrical conductivity increases steadily without abrupt changes. The electrical conductivity of δ-(Al0.52Fe0.48)OOH is greater than that of pure δ-AlOOH at high pressure, suggesting that both small polaron and proton conduction mechanisms dominate in iron-bearing δ-AlOOH. Furthermore, the high-pressure electrical conductivity profiles are comparable between δ-(Al0.95Fe0.05)OOH and δ-(Al0.52Fe0.48)OOH, indicating that high-iron content only marginally influences the conductivity of iron-bearing δ-AlOOH. Notably, the electrical conductivity of iron-bearing δ-AlOOH along the North Philippine geotherm is greater than the average 1D electrical conductivity profile in the mantle (Ohta et al. 2010a). This result suggests that δ-(Al,Fe)OOH is a promising candidate to account for high conductivity in some subducting slabs.

Geochemistry & Geophysics↗
DOE OSTI2023

Delineating magnetization dynamics in solution-processed doped yttrium iron garnet thin films

Here, in this work, thin films of ruthenium-doped and cerium-doped yttrium iron garnet were deposited on silicon using solgel chemistry. Doped YIG could be produced in phase pure form up to a precursor stoichiometry of Y 3 Ru 0.1 Fe 4.9 O 12 and Ce 0.7 Y 2.3 Fe 5 O 12 . Both dopants significantly increase the coercivity and anisotropy field of the materials either due to domain wall pinning or increased spin–orbit coupling from the dopant. To delineate these two effects, the dynamic magnetic properties were studied using strip line ferromagnetic resonance (FMR). The FMR linewidth was separated into intrinsic loss and inhomogeneous line broadening. Inhomogeneous line broadening was found to dominate the magnetic losses in all the films likely due to magnon scattering off grain boundaries, but the Gilbert damping remained fairly low. By comparing the two dopants, it was found that Gilbert damping increased more in Ce:YIG films than in Ru:YIG films. This finding was corroborated by changes in the anisotropy field of the films, indicating a larger contribution from spin–orbit coupling from cerium than from ruthenium. Surprisingly, while magnetic loss globally increased with higher substitution, adding a small amount of dopant actually reduced the inhomogeneous line broadening in both sets of films. This was corroborated by crystallite size. The damping in Ru:YIG also decreased with a small amount of the dopant, which has been predicted by Kittel for doped garnets. Thus, it follows that there is an ideal doping regime where solgel YIG can be doped at low levels without increasing magnetic loss.

36 MATERIALS SCIENCE↗
NASA NTRS1986

Placers of cosmic dust in the blue ice lakes of Greenland

A concentration process occurring in the melt zone of the Greenland ice cap has produced the richest known deposit of cosmic dust on the surface of the earth. Extraterrestrial particles collected from this region are well preserved and are collectable in large quantities. The collected particles are generally identical to cosmic spheres found on the ocean floor, but a pure glass type was discovered that has not been seen in deep-sea samples. Iron-rich spheres are conspicuously rare in the collected material.

Maurette, M.↗
DOE OSTI2024

Self-assembly of a supramolecular spin-crossover tetrahedron

A new mononuclear iron(ii) SCO compound featuring H-bonding donor and acceptor units provides an entry to a purely supramolecular switchable {Fe 4 } tetrahedron that exhibits a singular magnetic behavior for each of the four Fe(ii) centers.

Chemistry↗
NASA NTRS2016

The Investigation of Chlorate/Iron-Phase Mixtures as a Possible Source of Oxygen and Chlorine Detected by the Sample Analysis at Mars (SAM) Instrument in Gale Crater, Mars

The Sample Analysis at Mars (SAM) instrument on board the Curiosity Rover has detected oxygen and HCl gas releases from all analyzed Gale Crater sediments. The presence of perchlorate ClO4(sup-) and/or chlorates ClO3(sup-) are potential sources of the aforementioned O2 releases. The detections of O2 and HCl gas releases and chlorinated hydrocarbons by SAM coupled with the detection of perchlorates by Phoenix Lander's 2008 Wet Chemistry Laboratory all suggest that perchlorates, and possibly chorates, may be present in the Gale Crater sediments. Previous laboratory studies have attempted to replicate these O2 releases by heating perchlorates and chlorates in instruments operated similarly to those in the SAM instrument. Early studies found that pure perchlorates release O2 at temperatures higher than those observed in SAM data. Subsequently, studies were done to test the effects of mixing iron-phase minerals, analogous to those detected on Mars by ChemMin, with perchlorates. The iron in these minerals acts as a catalyst and causes O2 to be released from the perchlorate at a lower temperature. These studies found that perchlorate solutions mixed with either Hawaii palagonite or ferrihydrite produce O2 releases at temperatures similar to the Rocknest (RN) windblown deposit and the John Klein (JK) drill sample from the Sheepbed mudstone. The study also determined that perchlorate mixtures with magnetite, hematite, fayalite-magnetite, ilmentite, and pyrrhotite produce O2 releases at temperatures similar to the Confidence Hills (CH) drill sample from the Murray mudstone. Oxygen re-leases from pure chlorates were recently compared with the SAM data. Laboratory analyses determined that Ca-chlorate produces O2 and HCl peaks that are similar to those detected in RN and JK materials. Currently, no perchlorate/chlorate mixture with iron-phase minerals can explain the O2 releases from either the Cumberland (CB) drill sample from the Sheepbed mudstone or Windjana (WJ) drill sample from the Kimberly sandstone. Mixtures of chlorate solutions with iron-phase minerals may produce O2 peaks at temperatures that match those from CB and WJ materials. The goal of this work is to determine if heating chlorate solutions mixed with iron-phase minerals will produce O2 and HCl peak temperatures similar to O2 and HCl peak temperatures of sediments analyzed by SAM, particularly the WJ and CB materials.

Clark, J.↗
DOE OSTI2022

Structure and density of silicon carbide to 1.5 TPa and implications for extrasolar planets

There has been considerable recent interest in the high-pressure behavior of silicon carbide, a potential major constituent of carbon-rich exoplanets. In this work, the atomic-level structure of SiC was determined through in situ X-ray diffraction under laser-driven ramp compression up to 1.5 TPa; stresses more than seven times greater than previous static and shock data. Here we show that the B1-type structure persists over this stress range and we have constrained its equation of state (EOS). Using this data we have determined the first experimentally based mass-radius curves for a hypothetical pure SiC planet. Interior structure models are constructed for planets consisting of a SiC-rich mantle and iron-rich core. Carbide planets are found to be ~10% less dense than corresponding terrestrial planets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1976

Time dispersion of energetic solar particles, unexpected velocity and species dependence

The intensity-time behavior for protons and helium, as well as for carbon, oxygen and iron ions was measured following the 1974 September 19 solar flare for energies between 0.5 and approximately 5 MeV per nucleon. The profiles displayed a time dispersion which is inversely proportional to velocity for each individual species. In addition, at a given velocity the time dispersion also depended on the charge to mass ratio of the ion. Based on this latter dependence, it was concluded that while carbon and oxygen are essentially fully stripped, iron nuclei are not, having an effective charge Q = 10 + or - 5. The observed dispersion cannot be explained by purely rigidity dependent diffusive propagation.

Gallagher, J. J.↗
NASA NTRSDate not supplied

Regional variability of dust single scattering albedo due to mineral composition

Nearly all Earth System Models (ESMs) assume globally homogeneous dust aerosols, neglecting regional variations of the imaginary refractive index (IRI) due to varying mineral composition. This has led to a range of single scattering albedo (SSA) and direct radiative forcing (DRF) estimates, as models assign global properties using dust measurements from different regions. We use model and observational data to assess to what extent regionally varying mineral composition affects visible-band SSA and short-wave DRF of dust. We run global simulations with NASA GISS ModelE2.1, using optical properties for minerals based on laboratory-derived empirical relationships between dust IRI at visible wavelengths and the mineral content of iron oxides. When allowing mineral variations instead of homogeneous dust, we find regional differences in dust SSA up to ~0.06 and consequent variations in DRF up to ~6 and ~5 W/m2, at surface and top-of-atmosphere respectively. We compare model SSA with AERONET inversion data (Version 3.0, Level 2), filtered by aerosol size and optical properties to identify pure dust scenes. To investigate possible contamination by biomass burning aerosols, we use the dataset of Schuster et al. (2016, doi:10.5194/acp-16-1565-2016), who separately calculated the contribution of iron oxides and carbonaceous species to AERONET extinction and absorption optical depths. Our results show that: (1) the range of observed SSA (even without carbonaceous species) is larger than that resulting from homogeneous dust; (2) residual amounts of fine mode black and brown carbon may affect AERONET SSA even in seasons with limited biomass burning; (3) model SSA from our mineral scheme exceeds the AERONET range, possibly due also to an uncertain treatment of goethite. In summary, homogeneous dust cannot explain the variability of observed SSA, so regionally varying optical properties based on mineral content are necessary. Higher accuracy in soil mineralogy maps is needed to better reproduce SSA variations at regional scales. Also, distinct soil maps for hematite and goethite are required, given the high sensitivity of model SSA to their extreme optical properties.

V. Obiso↗
DOE OSTI2023

Emission Lines of Fe xiv, Fe xv, and Fe xvi in the Extreme Ultraviolet Region 40–100 Å

We report on emission spectra of iron in the extreme ultraviolet recorded at an electron density of ~10 11 cm -3 on the Lawrence Livermore electron beam ion trap facility. We present a summary of the observed emission lines, including wavelengths and emission intensities, and present spectra of pure Fe xiv through Fe xvi emission derived from our measurements in the 40–100 Å wavelength range. We show that spectral models, especially the current version of CHIANTI v10.0, describe the M-shell emission from these three charge states of iron reasonably well, and we are able to verify several transitions in CHIANTI for the first time.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1976

Time dispersion of energetic solar particles - Unexpected velocity and species dependence

The intensity-time behavior for protons and alpha-particles, as well as for carbon, oxygen, and iron ions, has been measured following the solar flare of September 19, 1974, for energies between 0.5 and about 5 MeV per nucleon. The profiles display a time dispersion which is inversely proportional to velocity for each individual species. In addition, at a given velocity the time dispersion also depends on the charge-to-mass ratio of the ion. Based on this latter dependence, it is concluded that while carbon and oxygen are essentially fully stripped, iron nuclei are not, having an effective charge of 10 plus or minus 5. The observed dispersion cannot be explained by purely rigidity-dependent diffusive propagation.

Ogallagher, J. J.↗