Search NASA⌕ Search

SEARCH · Search NASA

Results for “RANS simulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Comparison between Computational and Experimental Wall-Shear Stress and Pressure Measurements in a Supersonic Wind Tunnel

We study the performance of two selected RANS models (SST-$k$-$\omega$ and Baldwin-Lomax) to simulate the mean wall-shear and pressure data obtained from a distributed-roughness-related experimental campaign conducted at Ahmic Aerospace, LLC, located in Ohio, US. A structured compressible Navier-Stokes in-house solver, DPLR, is used to conduct the RANS simulations. As the final objective is to perform the studies under high-enthalpy flow conditions, such as inside the AHF facility at NASA-Ames Research Center (ARC), the current investigation focuses on the low-enthalpy cases using Ahmic's high-Reynolds-number supersonic wind tunnel as the initial step to simplify the flow physics. Furthermore, the wind tunnel simulations are conducted with perfectly-smooth walls to further simplify the problem and perform the initial testing of different solver-based RANS models. The Baldwin-Lomax model is observed to be more accurate than the SST model. However, when these RANS models and their roughness augmentation models are utilized to study their accuracy with respect to the experimental datasets, where the roughness effects are activated, both models perform well for a low roughness height case. However, as the roughness height increases, the SST model more accurately predicts the wall data (shear and pressure) than the Baldwin-Lomax model. Therefore, this present work has built a solid foundation for selecting the best RANS model to study the wall data under high-enthalpy flow conditions at the AHF facility soon.

Prakash Shrestha↗
NASA NTRS2004

Highlights of Project Accomplishments (2000-2004): Redshift Dependence of the Interaction-Activity Connection

We completed this project by developing the new galaxy-galaxy collision simulation code that we originally proposed. We included star formation heuristically, along with gas recycling and energetic feedback into the interstellar medium of the galaxies. We ran several test simulations. And we finally validated the code by running models to emulate the double-ring galaxy AM 0644-741. Most of the exotic and unique features of this collisional ring galaxy were matched by our models, thereby validating our algorithm, which may now be used by us and by the community for additional dynamic studies of galaxies. A paper has been submitted to the Astrophysical Journal describing our algorithm and the results of the AM 0644-741 modeling.

Borne, Kirk D.↗
NASA NTRSDate not supplied

Multiphysics Computational Analysis of a Perforated Plate Cooling Flow

A multiphysics analysis of a film cooling flow was conducted using a computational fluid dynamics (CFD) solver in conjunction with a conjugate heat transfer (CHT) solver. The film cooling problem consisted of a square nozzle producing a heated subsonic jet over a perforated plate with three sections of 45 cooling holes each. Results from the multiphysics analysis were compared to a CFD-only approach and experimental results. Reynolds-averaged Navier-Stokes (RANS) computations were employed first, with and without the CHT solver. The multiphysics approach provided much closer agreement with experimentally measured plate temperatures than the CFD-only approach. Comparisons of computed velocities and temperatures were also made with experimental data. Hybrid RANS-large eddy simulation calculations employing the Delayed Detached Eddy Simulation (DDES) approach were also conducted within the multiphysics framework. The DDES approach was unable to resolve turbulent structures in the near wall regions. Hence, the RANS part of the DDES model was used in near wall regions, and produced surface temperatures along with velocity and temperature profiles close to the wall that were very similar to the RANS results. The DDES approach did resolve structures in the outer portion of the boundary layer especially near the end of the plate where the boundary layer was thicker. The key result was the improved surface temperatures produced by the multiphysics approach employing CHT over the fluid-only approach.

Computational Fluid Dynamics↗
NASA NTRS2015

Revisiting Turbulence Model Validation for High-Mach Number Axisymmetric Compression Corner Flows

Two axisymmetric shock-wave/boundary-layer interaction (SWBLI) cases are used to benchmark one- and two-equation Reynolds-averaged Navier-Stokes (RANS) turbulence models. This validation exercise was executed in the philosophy of the NASA Turbulence Modeling Resource and the AIAA Turbulence Model Benchmarking Working Group. Both SWBLI cases are from the experiments of Kussoy and Horstman for axisymmetric compression corner geometries with SWBLI inducing flares of 20 and 30 degrees, respectively. The freestream Mach number was approximately 7. The RANS closures examined are the Spalart-Allmaras one-equation model and the Menter family of kappa − omega two equation models including the Baseline and Shear Stress Transport formulations. The Wind-US and CFL3D RANS solvers are employed to simulate the SWBLI cases. Comparisons of RANS solutions to experimental data are made for a boundary layer survey plane just upstream of the SWBLI region. In the SWBLI region, comparisons of surface pressure and heat transfer are made. The effects of inflow modeling strategy, grid resolution, grid orthogonality, turbulent Prandtl number, and code-to-code variations are also addressed.

Shock Wave↗
NASA NTRS1998

Simulation of Long Lived Tracers Using an Improved Empirically-Based Two-Dimensional Model Transport Algorithm

We have developed a new empirically-based transport algorithm for use in our GSFC two-dimensional transport and chemistry assessment model. The new algorithm contains planetary wave statistics, and parameterizations to account for the effects due to gravity waves and equatorial Kelvin waves. We will present an overview of the new algorithm, and show various model-data comparisons of long-lived tracers as part of the model validation. We will also show how the new algorithm gives substantially better agreement with observations compared to our previous model transport. The new model captures much of the qualitative structure and seasonal variability observed methane, water vapor, and total ozone. These include: isolation of the tropics and winter polar vortex, the well mixed surf-zone region of the winter sub-tropics and mid-latitudes, and the propagation of seasonal signals in the tropical lower stratosphere. Model simulations of carbon-14 and strontium-90 compare fairly well with observations in reproducing the peak in mixing ratio at 20-25 km, and the decrease with altitude in mixing ratio above 25 km. We also ran time dependent simulations of SF6 from which the model mean age of air values were derived. The oldest air (5.5 to 6 years) occurred in the high latitude upper stratosphere during fall and early winter of both hemispheres, and in the southern hemisphere lower stratosphere during late winter and early spring. The latitudinal gradient of the mean ages also compare well with ER-2 aircraft observations in the lower stratosphere.

Fleming, Eric L.↗
NASA NTRS2009

Simulation of an Isolated Tiltrotor in Hover with an Unstructured Overset-Grid RANS Solver

An unstructured overset-grid Reynolds Averaged Navier-Stokes (RANS) solver, FUN3D, is used to simulate an isolated tiltrotor in hover. An overview of the computational method is presented as well as the details of the overset-grid systems. Steady-state computations within a noninertial reference frame define the performance trends of the rotor across a range of the experimental collective settings. Results are presented to show the effects of off-body grid refinement and blade grid refinement. The computed performance and blade loading trends show good agreement with experimental results and previously published structured overset-grid computations. Off-body flow features indicate a significant improvement in the resolution of the first perpendicular blade vortex interaction with background grid refinement across the collective range. Considering experimental data uncertainty and effects of transition, the prediction of figure of merit on the baseline and refined grid is reasonable at the higher collective range- within 3 percent of the measured values. At the lower collective settings, the computed figure of merit is approximately 6 percent lower than the experimental data. A comparison of steady and unsteady results show that with temporal refinement, the dynamic results closely match the steady-state noninertial results which gives confidence in the accuracy of the dynamic overset-grid approach.

Lee-Rausch, Elizabeth M.↗
NASA NTRSDate not supplied

The Influence of Adaptive Mesh Refinement on the Prediction of Vortex Interactions about a Generic Missile Airframe

The complex interaction of forebody and wing vortices significantly impacts missile aerodynamics. The formation of these vortices involves smooth regions of the geometry or geometric discontinuities like leading edges, trailing edges, tips, and corners. Regions of supersonic flow and complex shock topologies interact with boundary layers and vortices. Smooth-body separation and 3D viscous effects strain current Reynolds-averaged Navier-Stokes (RANS) techniques. The quantification and control of discretization error is critical to obtaining reliable simulation results and often turbulence model assessments are made in the presence of unquantified (and potentially large) discretization errors. Two mesh adaptation schemes are applied to steady RANS simulations. Multiscale unstructured mesh adaptation is applied to control interpolation error estimates of the Mach field, which resolves boundary layers, vortices, and shocks. A dual-mesh approach with overset communication is applied between an expert-crafted near-body unstructured mesh and an adaptive off-body Cartesian mesh refined with Q-criterion scaled by the strain tensor magnitude. A generic missile configuration is examined in a supersonic flow field to show the interaction of mesh adaptation and turbulence model. Turbulence model modifications for rotational correction and a quadratic constitutive relationship show a strong influence on adaptive mesh refinement and predicted rolling moment.

slender body aerodynamics↗
NASA NTRS2012

AeroMACS Interference Simulations for Global Airports

Ran 18 scenarios with Visualyse Professional interference software (presented 2 most realistic scenarios). Scenario A: 85 large airports can transmit 1650 mW on each of 11 channels. 173 medium airports can transmit 825 mW on each of 6 channels. 5951 small airports can transmit 275 mW on one channel. Reducing power allowed for small airports in Scenario B increases allowable power for large and medium airports, but should not be necessary as Scenario A levels are more than adequate. These power limitations are conservative because we are assuming worst case with 100% duty.

Wilson, Jeffrey D.↗
NASA NTRS1997

Global MHD Simulation of Mesoscale Structures at the Magnetospheric Boundary

We have continued our modeling of the solar wind/magnetosphere interaction for steady solar Wind conditions by carrying out a series of 3 D global magneto-hydrodynamics (MHD) simulations using a set of predetermined solar wind parameters as input to the code. With the results from the simulations that we ran last year for two other dipole tilts (0 and 35 deg), we have 36 data sets to study the dynamics of mesoscale structures at the magnetospheric boundary. We have started the analysis of these runs to investigate geometrical properties and the topology of the magnetic and electric fields for the different solar wind regimes and orientations considered. Preliminary results indicate that merging sites are consistent with patterns proposed for antiparallel merging at the dayside magnetopause. Another goal of this investigation is to establish the displacement of the cusp region as a function of the solar wind dynamic pressure, IMF direction and magnetic field dipole tilt. One of the difficulties of that study is to locate precisely the cusp in the simulation results. We have used several case studies to establish a series of criteria in to permit a routine identification of that location. We need now to process the rest of the simulation results using these criteria to obtain statistical results.

Berchem, Jean↗
NASA NTRS2007

Progress Toward Improving Jet Noise Predictions in Hot Jets

An acoustic analogy methodology for improving noise predictions in hot round jets is presented. Past approaches have often neglected the impact of temperature fluctuations on the predicted sound spectral density, which could be significant for heated jets, and this has yielded noticeable acoustic under-predictions in such cases. The governing acoustic equations adopted here are a set of linearized, inhomogeneous Euler equations. These equations are combined into a single third order linear wave operator when the base flow is considered as a locally parallel mean flow. The remaining second-order fluctuations are regarded as the equivalent sources of sound and are modeled. It is shown that the hot jet effect may be introduced primarily through a fluctuating velocity/enthalpy term. Modeling this additional source requires specialized inputs from a RANS-based flowfield simulation. The information is supplied using an extension to a baseline two equation turbulence model that predicts total enthalpy variance in addition to the standard parameters. Preliminary application of this model to a series of unheated and heated subsonic jets shows significant improvement in the acoustic predictions at the 90 degree observer angle.

Khavaran, Abbas↗
NASA NTRS2015

Wear-Out Sensitivity Analysis Project Abstract

During the course of the Summer 2015 internship session, I worked in the Reliability and Maintainability group of the ISS Safety and Mission Assurance department. My project was a statistical analysis of how sensitive ORU's (Orbital Replacement Units) are to a reliability parameter called the wear-out characteristic. The intended goal of this was to determine a worst case scenario of how many spares would be needed if multiple systems started exhibiting wear-out characteristics simultaneously. The goal was also to determine which parts would be most likely to do so. In order to do this, my duties were to take historical data of operational times and failure times of these ORU's and use them to build predictive models of failure using probability distribution functions, mainly the Weibull distribution. Then, I ran Monte Carlo Simulations to see how an entire population of these components would perform. From here, my final duty was to vary the wear-out characteristic from the intrinsic value, to extremely high wear-out values and determine how much the probability of sufficiency of the population would shift. This was done for around 30 different ORU populations on board the ISS.

Harris, Adam↗
NASA NTRS2015

Verification and Validation of the k-kL Turbulence Model in FUN3D and CFL3D Codes

The implementation of the k-kL turbulence model using multiple computational uid dy- namics (CFD) codes is reported herein. The k-kL model is a two-equation turbulence model based on Abdol-Hamid's closure and Menter's modi cation to Rotta's two-equation model. Rotta shows that a reliable transport equation can be formed from the turbulent length scale L, and the turbulent kinetic energy k. Rotta's equation is well suited for term-by-term mod- eling and displays useful features compared to other two-equation models. An important di erence is that this formulation leads to the inclusion of higher-order velocity derivatives in the source terms of the scale equations. This can enhance the ability of the Reynolds- averaged Navier-Stokes (RANS) solvers to simulate unsteady ows. The present report documents the formulation of the model as implemented in the CFD codes Fun3D and CFL3D. Methodology, veri cation and validation examples are shown. Attached and sepa- rated ow cases are documented and compared with experimental data. The results show generally very good comparisons with canonical and experimental data, as well as matching results code-to-code. The results from this formulation are similar or better than results using the SST turbulence model.

Abdol-Hamid, Khaled S.↗
NASA NTRS2018

Development and Documentation of kL-Based Linear, Nonlinear, and Full Reynolds Stress Turbulence Models

The development and implementation of kL-based Reynolds Average Navier-Stokes (RANS) turbulence models are reported herein. The kL is based on Abdol-Hamid's closure and Menter's modi cation to Rotta's two-equation model. Rotta shows that a reliable transport equation can be formed from the turbulent length scale L, and the turbulent kinetic energy k. Rotta's kL equation is well suited for term-by-term modeling and displays useful features compared to other scale formulation. One of the important di erences is the inclusion of higher order velocity derivatives in the source terms of the scale equation. This can enhance the ability of RANS solvers to simulate unsteady ows in URANS mode. The present report documents the formulation of three model levels of turbulence models as implemented in the CFD code FUN3D. Methodology and calibration examples are shown in detail. The levels are the linear k-kL and the two-equation algebraic Reynolds stress model (ARSM) as well as the full Reynolds Stress Model (RSM). Attached, separated and corner ow cases are documented and compared with experimental, theoretical and other turbulence model data. The results show generally very good comparisons with canonical and experimental data. The results from this formulation are similar or better than results using the SST two- equation turbulence model. ARSM shows great promise with similar level of computational resources as general two equation turbulence models.

Abdol-Hamid, Khaled S.↗
NASA NTRS2018

kL-based Linear and Nonlinear Two-Equation Turbulence Models

The development and implementation of kL-based Reynolds Average Navier-Stokes (RANS) two-equation turbulence models are reported herein. The kL is based on Abdol-Hamid's closure and Menter's modification to Rotta's two-equation model. Rotta shows that a reliable transport equation can be formed from the turbulent length scale L, and the turbulent kinetic energy k. Rotta's kL equation is well suited for term-by-term modeling and displays useful features compared to other scale formulation. One of the important differences is the inclusion of higher order velocity derivatives in the source terms of the scale equation. This can enhance the ability of RANS solvers to simulate unsteady flows in URANS mode. The present report documents the formulation of two model levels of turbulence models as implemented in the computational fluid dynamics FUN3D code. The levels are the two-equation linear k-kL and the two-equation algebraic Reynolds stress model (ARSM). Free shear, separated and corner flow cases are documented and compared with experimental, and other turbulence model data. The results show generally very good comparisons with experimental data. The results from this formulation are similar or better than results using the SST two-equation turbulence model. ARSM shows great promise with similar level of computational resources as basic two-equation turbulence models.

Abdol-Hamid, K. S.↗
NASA NTRS2020

Juncture Flow Computations using kL-Based Turbulence Models

The development and implementation of kL-based Reynolds-Average Navier-Stokes (RANS) two-equation turbulence models are reported in this paper. The kL model is based on Abdol-Hamid's closure and Menter's modification to Rotta's two-equation model. Rotta showed that a reliable transport equation can be formed from the turbulence length scale L, and the turbulence kinetic energy k. Rotta's kL equation is well suited for a term-by-term modeling and displays useful features compared to other scale formulations. One of the important differences is the inclusion of higher-order velocity derivatives in the source terms of the scale equation. This can enhance the ability of RANS solvers to simulate unsteady flows in URANS mode. The k-kL scheme has been modified to include the Algebraic Reynolds Stress Model (ARSM) and the Quadratic Constitutive Relation (QCR) as nonlinear models. These models have gone through extensive validations using two-dimensional benchmark problems. The present study documents the application of the k-kL schemes to simulate flow around the Juncture Flow Model (JFM). The k-kL prediction results show generally good comparisons with measurements. The results from this formulation are similar to, or better than results using the SA-RC-QCR2000 two-equation turbulence model. The ARSM and the QCR formulations of k-kL show promise with a similar level of computational resources as basic two-equation turbulence models.

K S Abdol-Hamid↗
NASA NTRS2007

Simulation of a Periodic Jet in a Crossflow with a RANS Solver Using an Unstructured Grid

A second-order unstructured-grid code, developed and used primarily for steady aerodynamic simulations, is applied to the synthetic jet in a cross flow. The code, FUN3D, is a vertex-centered finite-volume method originally developed by Anderson[1, 2], and is currently supported by members of the Fast Adaptive Aerospace Tools team at NASA Langley. Used primarily for design[3] and analysis[4] of steady aerodynamic configurations, FUN3D incorporates a discrete adjoint capability, and supports parallel computations using MPI. A detailed description of the FUN3D code can be found in the references given above. The code is under continuous development and contains a variety of flux splitting algorithms for the inviscid terms, two methods for computing gradients, several turbulence models, and several solution methodologies; all in varying states of development. Only the most robust and reliable components, based on experiences with steady aerodynamic simulations, were employed in this work. As applied in this work, FUN3D solves the Reynolds averaged Navier-Stokes equations using the one equation turbulence model of Spalart and Allmaras[5]. The spatial discretization is formed on unstructured meshes using a vertex-centered approach. The inviscid terms are evaluated by a flux-difference splitting formulation using least-squares reconstruction and Roe-type approximate Riemann fluxes. Green-Gauss gradient evaluations are used for viscous and turbulence modeling terms. The discrete spatial operator is combined with a backward time operator which is then solved iteratively using point or line Gauss-Seidel and local time stepping in a pseudo time. For steady flows, the physical time step is set to infinity and the pseudo time step is ramped up with the iteration count. A second-order backward in time operator is used for time accurate flows with 20 to 50 steps in the pseudo time applied at each physical time step. For this effort, FUN3D was modified to support spatially varying boundary and initial conditions, and unsteady boundary conditions. Also, a specialized in/out flow boundary condition was implemented to model the action of the diaphragm. This boundary condition is described below in more detail. The grids were generated using the internally developed codes GridEX[6] for meshing the surfaces and inviscid regions of the domain, and for CAD access; and MesherX[7] for meshing the viscous regions. Grid spacing in on the surfaces and in the inviscid regions are indirectly controlled by specifying sources. The viscous layers are generated using an advancing layer technique. MeshersX allows the user to control the spatial variation of the first step off the surface, growth rates, and the termination criterion by providing small problem dependent subroutines.

Atkins, H. L.↗
NASA NTRS2016

Development of a High-Order Space-Time Matrix-Free Adjoint Solver

The growth in computational power and algorithm development in the past few decades has granted the science and engineering community the ability to simulate flows over complex geometries, thus making Computational Fluid Dynamics (CFD) tools indispensable in analysis and design. Currently, one of the pacing items limiting the utility of CFD for general problems is the prediction of unsteady turbulent ows.1{3 Reynolds-averaged Navier-Stokes (RANS) methods, which predict a time-invariant mean flowfield, struggle to provide consistent predictions when encountering even mild separation, such as the side-of-body separation at a wing-body junction. NASA's Transformative Tools and Technologies project is developing both numerical methods and physical modeling approaches to improve the prediction of separated flows. A major focus of this e ort is efficient methods for resolving the unsteady fluctuations occurring in these flows to provide valuable engineering data of the time-accurate flow field for buffet analysis, vortex shedding, etc. This approach encompasses unsteady RANS (URANS), large-eddy simulations (LES), and hybrid LES-RANS approaches such as Detached Eddy Simulations (DES). These unsteady approaches are inherently more expensive than traditional engineering RANS approaches, hence every e ort to mitigate this cost must be leveraged. Arguably, the most cost-effective approach to improve the efficiency of unsteady methods is the optimal placement of the spatial and temporal degrees of freedom (DOF) using solution-adaptive methods.

Adjoint↗
NASA NTRS2004

Numerical Study of Flow Past a Circular Cylinder Using RANS, Hybrid RANS/LES and PANS Formulations

Two multiscale type turbulence models are implemented in the PAB3D solver. The models are based on modifying the Reynolds Averaged Navier-Stokes (RANS) equations. The first scheme is a hybrid RANS/LES model utilizing the two-equation (k(sub epsilon)) model with a RANS/LES transition function dependent on grid spacing and the computed turbulence length scale. The second scheme is a modified version of the partially averaged Navier-Stokes (PANS) model, where the unresolved kinetic energy parameter (f(sub k)) is allowed to vary as a function of grid spacing and the turbulence length scale. Solutions from these models are compared to RANS results and experimental data for a stationary and rotating cylinder. The parameter f(sub k) varies between zero and one and has the characteristic to be equal to one in the viscous sub layer, and when the RANS turbulent viscosity becomes smaller than the LES viscosity. The formulation, usage methodology, and validation example are presented to demonstrate the enhancement of PAB3D's time-accurate and turbulence modeling capabilities. The models are compared to RANS results and experimental data for turbulent separated flows (TS) and laminar separated flows (LS) around stationary and rotating cylinders. For a stationary cylinder, the TS case is accurately simulated using the general two-equation k(sub epsilon) turbulence model (eddy-viscosity model). PAB3D accurately predicts the drag coefficient (CD), lift coefficient (CL) and the Strouhal number (St). The LS case was a challenge for the RANS computation with an eddy-viscosity turbulence model. The RANS/LES and PANS performed well and showed marked improvements over the RANS solution. The modified PANS model was the most accurate. For the rotating cylinder, the spin ratio varied from zero to one, and the PANS results were in good agreement with published experimental data. RANS/LES and PANS capture both temporal and spatial fluctuations and produce large-scale structures that do not occur in the RANS simulation. The current results show promise for the capability of PANS in simulating unsteady and complex flow phenomena.

Elmiligui, Alaa A.↗