Search NASA⌕ Search

SEARCH · Search NASA

Results for “Radiation damping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

118 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Impact of the equation of state on f - and p - mode oscillations of neutron stars

We investigate the impact of the neutron-star matter equation of state on the f- and p1-mode oscillations of neutron stars obtained within the Cowling approximation and linearized general relativity. The f- and p 1 -mode oscillation frequencies, and their damping times are calculated using representative sets of Skyrme Hartree-Fock and relativistic mean-field models, all of which reproduce nuclear systematics and support 2M ⊙ neutron stars. Our study shows strong correlations between the frequencies of f- and p 1 -modes and their damping times with the pressure of β-equilibrated matter at densities equal to or slightly higher than the nuclear saturation density ρ 0 . Such correlations are found to be almost independent of the composition of the stars. The frequency of the p 1 -mode of 1.4M ⊙ star is strongly correlated with the slope of the symmetry energy L 0 and β-equilibrated pressure at density ρ 0 . Compared to GR calculations, the error in the Cowling approximation for the f-mode is about 30% for neutron stars of low mass, whereas it decreases with increasing mass. Here, the accuracy of the p 1 -mode is better than 15% for neutron stars of maximum mass, and improves for lower masses and higher number of radial nodes. I.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Comparison of heavy-ion transport simulations: Mean-field dynamics in a box

Within the transport model evaluation project (TMEP) of simulations for heavy-ion collisions, the mean-field response is examined here. Specifically, zero-sound propagation is considered for neutron-proton symmetric matter enclosed in a periodic box, at zero temperature and around normal density. The results of several transport codes belonging to two families (BUU-like and QMD-like) are compared among each other and to exact calculations. For BUU-like codes, employing the test particle method, the results depend on the combination of the number of test particles and the spread of the profile functions that weight integration over space. These parameters can be properly adapted to give a good reproduction of the analytical zero-sound features. QMD-like codes, using molecular dynamics methods, are characterized by large damping effects, attributable to the fluctuations inherent in their phase-space representation. Moreover, for a given nuclear effective interaction, they generally lead to slower density oscillations, as compared to BUU-like codes. The latter problem is mitigated in the more recent lattice formulation of some of the QMD codes. Furthermore, the significance of these results for the description of real heavy-ion collisions is discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Control of wakefield in sub-THz dielectric-lined waveguides using multiple-bunch excitation

Beam-driven wakefield accelerators offer the potential to achieve accelerating fields approaching the sub-GV/m range, paving the way for compact and cost-effective next-generation high-energy colliders. This method typically employs a two-bunch system: a drive bunch that excites an electromagnetic wakefield in a solid-state or plasma medium, and a witness bunch that extracts energy from the wake for acceleration. Our research focuses on two key challenges in wakefield acceleration using structures. First, we investigate strategies to suppress transverse instabilities by employing non-cylindrical geometries that damp dipole modes. Second, we explore methods to precisely terminate the wakefield after the interaction region, thereby improving the efficiency of energy transfer. This paper presents detailed simulation results and the corresponding experimental design developed to validate these concepts. Furthermore, the proposed experiment will be carried out at the Argonne Wakefield Accelerator (AWA) facility, focusing on controlling wakefield duration through tailored drive and witness bunch configurations and evaluating dielectric-lined structures with non-cylindrical cross sections.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Dynamics of the O ( 4 ) critical point in QCD: Critical pions and diffusion in model G

We present a detailed study of the finite momentum dynamics of the O ( 4 ) critical point of QCD, which lies in the dynamic universality class of “model G.” The critical scaling of the model is analyzed in multiple dynamical channels. For instance, the finite momentum analysis allows us to precisely extract the pion dispersion curve below the critical point. The pion velocity is in striking agreement with the predictions relation and static universality. The pion damping rate and velocity are both consistent with the dynamical critical exponent ζ = 3 / 2 of model G. Similarly, although the critical amplitude for the diffusion coefficient of the conserved O ( 4 ) charges is small, it is clearly visible both in the restored phase and with finite explicit symmetry breaking, and its dynamical scaling is again consistent with ζ = 3 / 2 . We determine a new set of universal dynamical critical amplitude ratios relating the diffusion coefficient to a suitably defined order parameter relaxation time. We also show that in a finite volume simulation, the chiral condensate diffuses on the coset manifold in a manner consistent with dynamical scaling, and with a diffusion coefficient that is determined by the transport coefficients of hydrodynamic pions. Finally, the amplitude ratios (together with other nonuniversal amplitudes also reported here) compile all relevant information for further studies of model G both in and out of equilibrium. Published by the American Physical Society 2024

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Shell effects in quasi-fission: Reactions forming actinide and superheavy compound nuclei

Quasi-fission occurs in fully damped heavy-ion collisions following a significant mass transfer between the fragments, without formation of a compound nucleus. As in fission, quasi-fission is expected to be affected by quantum effects leading to asymmetric mass splits. Quantum shells stabilising fission fragments with octupole shapes have been invoked as a factor determining the distribution of nucleons between the fragments at scission, explaining the fact that the centroid of the heavy fragment charge distribution is found around Z = 54 protons in fission and quasi-fission of actinides. These shell effects are studied in microscopic studies of quasi-fission. In particular, time-dependent Hartree-Fock (TDHF) calculations have been performed for reactions forming actinides.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Improvements to the macroscopic-microscopic approach of nuclear fission

The well-established macroscopic-microscopic (mac-mic) description of nuclear fission enables the prediction of fission-fragment yields for a broad range of fissioning systems. In this work, we present several key enhancements to this approach. We improve upon the microscopic sector of nuclear potential-energy surfaces by magnifying the resolution of the Lipkin-Nogami equations and strengthening the Strutinsky procedure, thus reducing spurious effects from the continuum. We further present a novel deterministic method for calculating fission dynamics under the assumption of strongly damped nucleonic motion. Our technique directly determines the evolution of the scissioned shape distribution according to the number of random-walk steps rather than the statistical accumulation of fission events. We show that our new technique is equivalent to the Metropolis random walk pioneered over the past decade by Randrup and colleagues. It further improves upon it because we remove the need for altering the nuclear landscape via a biased potential. With our final improvement, we calculate fission fragments mass and charge distributions using particle number projection, which affords the simultaneous calculation of both mass- and charge-yield distributions. Fission fragments are thus calculated from the quantum-mechanical A -body states of the potential-energy surface rather than from the collective mass asymmetry variable α g of the finite-range liquid-drop model used in past work. We highlight the success of our enhancements by predicting the odd-even staggering and the charge polarization for the neutron-induced fission of 233 U and 235 U .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Primary fission fragment mass yields across the chart of nuclides

In this work, we have calculated a complete set of primary fission fragment mass yields, Y(A), for heavy nuclei across the chart of nuclides, including those of particular relevance to the rapid neutron capture process (r process) of nucleosynthesis. We assume that the nuclear shape dynamics are strongly damped, which allows for a description of the fission process via Brownian shape motion across nuclear potential-energy surfaces. The macroscopic energy of the potential was obtained with the Finite-Range Liquid-Drop Model (FRLDM), while the microscopic terms were extracted from the single-particle level spectra in the fissioning system by the Strutinsky procedure for the shell energies and the BCS treatment for the pairing energies. For each nucleus considered, the fission fragment mass yield, Y(A), is obtained from 50 000 to 500 000 random walks on the appropriate potential-energy surface. The full mass and charge yield, Y(Z,A), is then calculated by invoking the Wahl systematics. With this method, we have calculated a comprehensive set of fission-fragment yields from over 3800 nuclides bounded by 80 ≤ Z ≤ 130 and A ≤ 330; these yields are provided as an ASCII formatted database in the Supplemental Material. We compare our yields to known data and discuss general trends that emerge in low-energy fission yields across the chart of nuclides.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Parametrically driven nonlinear Dirac equation with arbitrary nonlinearity

Here, the damped and parametrically driven nonlinear Dirac equation with arbitrary nonlinearity parameter $\kappa$ is analyzed, when the external force is periodic in space and given by $\mathcal{f(x) = r}$ cos(Kx), both numerically and in a variational approximation using five collective coordinates (time dependent shape parameters of the wave function). Our variational approximation satisfies exactly the low-order moment equations. Because of competition between the spatial period of the external force λ = 2π/K , and the soliton width $l_s$, which is a function of the nonlinearity $\kappa$ as well as the initial frequency ω 0 of the solitary wave, there is a transition (at fixed ω 0 ) from trapped to unbound behavior of the soliton, which depends on the parameters $\mathcal{r}$ and K of the external force and the nonlinearity parameter $\kappa$. We previously studied this phenomena when $\kappa$ = 1 where we showed that for λ $\gg l_s$ the soliton oscillates in an effective potential, while forλ $\ll l_s$ it moves uniformly as a free particle. In this paper we focus on the $\kappa$ dependence of the transition from oscillatory to particle behavior and explicitly compare the curves of the transition regime found in the collective coordinate approximation as a function of $\mathcal{r}$ and K when $\kappa$ = 1/2,1,2 at fixed value of the frequency ω 0 . Since the solitary wave gets narrower for fixed ω 0 as a function of $\kappa$, we expect and indeed find that the regime where the solitary wave is trapped is extended as we increase $\kappa$.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Production of neutron-rich heavy nuclei in deep-inelastic 208 Pb + 208 Pb collisions within the stochastic mean-field theory

In deep-inelastic collisions of heavy nuclei, reaction products with a wide range of mass and charge are produced. Such collisions been considered as a possible way to produce superheavy nuclei, as an alternative to fusion reactions. To provide reliable theoretical predictions, it is desired to develop microscopic approaches that correctly and accurately describe nucleon transfer processes in dissipative collisions of heavy nuclei. The purpose of the present work is (1) to investigate the mechanism of nucleon transfers in dissipative collisions of two heavy nuclei, and (2) to explore possible pathways to produce neutron-rich heavy nuclei, through detailed theoretical analyses of fluctuations and correlations in nucleon transfers in 208 Pb + 208 Pb reactions. Three-dimensional time-dependent Hartree-Fock (TDHF) calculations are performed for the collisions of 208 Pb + 208 Pb at 𝐸 c.m. = 832, 936, and 1040 MeV, using the Skyrme SLy4d energy density functional. To calculate fluctuations and correlations in nucleon transfers, we employ the stochastic mean-field (SMF) theory, and the results are compared with another theoretical framework currently available, the time-dependent random phase approximation (TDRPA). Primary and secondary production cross sections are calculated with the SMF theory combined with a statistical model, GEMINI ++ . Using information of nucleon flow across a neck of colliding nuclei in TDHF calculations, we solve quantal diffusion equations for fluctuations and correlations in nucleon transfers based on the SMF theory. From the SMF calculations, we obtain the time evolution of diffusion coefficients as well as fluctuations and correlations in nucleon transfers for a range of initial orbital angular momenta. We compare the results of the SMF calculations with those of TDRPA, showing that TDRPA tends to predict substantially larger fluctuations and correlations in strongly damped collisions of heavy nuclei, which exhibit complex initial angular momentum dependence, while the SMF results provide almost constant (stable) values. Using the obtained fluctuations and correlations, we calculate primary and secondary production cross sections for the 208 Pb + 208 Pb collisions. From the results, we find that both lighter and heavier reaction products as compared to 208 Pb are produced for a wide region in the 𝑁−𝑍 plane as primary products, thanks to the quantal diffusion mechanism in the dissipative collisions. However, we show that cross sections for production of heavy nuclei with 𝑍 ≳ 90 or 𝑁 ≳ 135 are washed out due to secondary particle evaporation and/or fission processes. On the other hand, we find that there remain sizable cross sections for production of neutron-rich nuclei along 𝑁 = 126 with 𝑍< 82, even after secondary disintegration processes. We demonstrate that the secondary production cross sections depend weakly on incident energies, but lower (higher) energy is slightly preferred for production of nuclei with smaller (larger) atomic numbers as compared to 𝑍 = 82. Here, based on the microscopic SMF calculations, it has been shown that deep-inelastic collisions of heavy nuclei, such as 208 Pb + 208 Pb examined in this study, can be a promising means to produce neutron-rich heavy nuclei along 𝑁=126. Discrepancies between the SMF and TDRPA approaches are left unsolved for future investigations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Status and future plans for C 3 R&D

C 3 is an opportunity to realize an e + e - collider for the study of the Higgs boson at √s = 250 GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C 3 is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced state of linear collider designs, the key system that requires technical maturation for C 3 is the main linac. This paper presents the staged approach towards a facility to demonstrate C 3 technology with both Direct (source and main linac) and Parallel (beam delivery, damping ring, ancillary component) R&D. The primary goal of the C 3 Demonstration R&D Plan is to reduce technical and cost risk by building and operating the key components of C 3 at an adequate scale. This R&D plan starts with the engineering design, and demonstration of one cryomodule and will culminate in the construction of a 3 cryomodule linac with pre-production prototypes. This R&D program would also demonstrate the linac rf fundamentals including achievable gradient and gradient stability over a full electron bunch train and breakdown rates. It will also investigate beam dynamics including energy spread, wakefields, and emittance growth. This work will be critical to confirm the suitability of the C 3 beam parameters for the physics reach and detector performance in preparation for a Conceptual Design Report (CDR), as well as for follow-on technology development and industrialization. The C 3 Demonstration R&D Plan will open up significant new scientific and technical opportunities based on development of high-gradient and high-efficiency accelerator technology. It will push this technology to operate both at the GeV scale and mature the technology to be reliable and provide high-brightness electron beams. The timeline for progressing with C 3 technology development will be governed by practical limitations on both the technical progress and resource availability. It consists of four stages: Stage 0) Ongoing fundamental R&D on structure prototypes, damping and vibrations. Stage 1) Advancing the engineering maturity of the design and developing start-to-end simulations including space-charge and wakefield effects. This stage will include testing of strucutres operating at cryogenic temperatures. Beam tests would be performed with high beam current to test full beam loading. Stage 2) Production and testing of the first cryomodule at cryogenic temperatures. This would provide sufficient experimental data to compile a CDR and it is anticipated for Stage 2 to last 3 years and to culminate with the transport of photo-electrons through the first cryomodule. Stage 3) Updates to the engineering design of the cryomodules, production of the second and third cryomodule and their installation. Lower charge and lower emittance beams will be used to investigate emittance growth. The successful full demonstration of the 3 cryomodules to deliver up to a 3 GeV beam and achieve the C 3 five gradient will allow a comprehensive and robust evaluation of the technical design of C 3 as well as mitigate technical, schedule, and cost risks required to proceed with a Technical Design Report (TDR).

radiation hardened magnets↗