Search NASA⌕ Search

SEARCH · Search NASA

Results for “Radio Frequency Interference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Interference Mitigation Effects on Synthetic Aperture Radar Coherent Data Products

For synthetic aperture radars radio frequency interference from sources external to the radar system and techniques to mitigate the interference can degrade the quality of the image products. Usually the radar system designer will try to balance the amount of mitigation for an acceptable amount of interference to optimize the image quality. This dissertation examines the effect of interference mitigation upon coherent data products of fine resolution, high frequency synthetic aperture radars using stretch processing. Novel interference mitigation techniques are introduced that operate on single or multiple apertures of data that increase average coherence compared to existing techniques. New metrics are applied to evaluate multiple mitigation techniques for image quality and average coherence. The underlying mechanism for interference mitigation techniques that affect coherence is revealed.

42 ENGINEERING↗

Electric propulsion interactive effects with spacecraft science payloads.

Interactive effects between electric thruster units and a Solar Electric Pioneer (SEP) spacecraft science payload are investigated. Studied effects include magnetic contamination (steady state), electric contamination (steady state and time varying) and particle contamination of regions in and around the spacecraft. Conducted electromagnetic interference is measured for thrusters powered with prototype power processing units and radio frequency interference effects between the thruster and the omnidirectional low gain antenna are determined. Material deposition and transport of thruster propellant ions and atoms and charge exchange metal ions and atoms are also experimentally determined. Large scale environmental effects between the plasma thrust beam and the particles and fields in interplanetary space are discussed. Contaminant reduction techniques are proposed, and both laboratory and in-space interactive effects tests are suggested.

Sellen, J. M., Jr.↗

Carrier tracking loop performance in the presence of strong CW interference

The analyses of Bruno (1973) and Blanchard (1974, 1975) of the effects of strong radio-frequency interference on the behavior of a phase-locked loop are examined in detail. The lock constraints derived directly from a steady-state trial solution by Bruno and those derived with simplifying assumptions from the same trial solution by Blanchard are compared, and circumstances which may be accommodated by the results of Bruno but not those of Blanchard are pointed out. An explicit approximation is then derived which extends the closed-form approximation of Bruno for the loop phase error to the entire lock region. Results are illustrated for a loop filter representative of a phase-locked loop in a deep space network receiver.

Levitt, B. K.↗

Interim radio spectrum surveillance station

Radio frequency interference at NASA's deep space stations has become a serious problem. A radio spectrum surveillance capability at these stations is needed to determine the sources of interference so that preventative measures can be taken. The first phase of a program to develop this capability was the development of a low-cost surveillance station now in operation at the Goldstone Space Communication Complex near Barstow, California. This interim surveillance station is described and findings from the use of this equipment are presented.

Hersey, D. R.↗

The Detection and Mitigation of RFI with the Aquarius L-Band Scatterometer

The Aquarius sea-surface salinity mission includes an L-band scatterometer to sense sea-surface roughness. This radar is subject to radio-frequency interference (RFI) in its passband from 1258 to 1262 MHz, a region also allocated for terrestrial radio location. Due to its received power sensitivity requirements, the expected RFI environment poses significant challenges. We present the results of a study evaluating the severity of terrestrial RFI sources on the operation of the Aquarius scatterometer, and propose a scheme to both detect and remove problematic RFI signals in the ocean backscatter measurements. The detection scheme utilizes the digital sampling of the ambient input power to detect outliers from the receiver noise floor which are statistically significant, and flags nearby radar echoes as potentially contaminated by RFI. This detection strategy, developed to meet tight budget and data downlink requirements, has been implemented and tested in hardware, and shows great promise for the detection and global mapping of L-band RFI sources.

Electromagnetic radiative interference↗

Study of a Strong RFI Source at L-Band Using SMAP Radiometer Data

This paper presents an analysis of Radio Frequency Interference (RFI) in the 1.400-1.427 GHz frequency band. The study considers the sudden and strong increase of interference from a particular emitter in China that has been observed in July 2020 by radiometers from both ESA's SMOS (Soil Moisture Ocean Salinity) and NASA's SMAP (Soil Moisture Active Passive) missions. It provides an example of the characterization of a source of RFI and illustrates the capabilities of the SMAP radiometer receiver and RFI processing incorporated in it to identify and understand interference.

Radio Frequency Interface↗

Interference-Detection Module in a Digital Radar Receiver

A digital receiver in a 1.26-GHz spaceborne radar scatterometer now undergoing development includes a module for detecting radio-frequency interference (RFI) that could contaminate scientific data intended to be acquired by the scatterometer. The role of the RFI-detection module is to identify time intervals during which the received signal is likely to be contaminated by RFI and thereby to enable exclusion, from further scientific data processing, of signal data acquired during those intervals. The underlying concepts of detection of RFI and rejection of RFI-contaminated signal data are also potentially applicable in advanced terrestrial radio receivers, including software-defined radio receivers in general, receivers in cellular telephones and other wireless consumer electronic devices, and receivers in automotive collision-avoidance radar systems.

Fischman, Mark↗

SETI Investigations at Jodrell Bank, England: September Through November 1983

The radiofrequency interference RFI environment was examined in the frequency band 1404 to 1444 MHz using the DSN Advanced Systems' Radio Frequency Interference Surveillance System. An uncooled FET amplifier was placed on the 12.8-m antenna, and unlimited observing time was made available to the SETI project. One night of observing at 1667 MHz was made available on the 76 m antenna. Preliminary results of four investigations are reported: (1) full scans of the horizon, cataloging RFI events between 1404 and 1444 MHz; (2) lunar reflections of terrestrial RFI signals between 1424 and 1444 MHz; (3) noise background distortions caused by galactic neutral hydrogen emission at 1420.4 MHz; and (4) low sensitivity search for spectral features of F, G, and K stars.

Downs, G. S.↗

Study of a Strong L-Band RFI Source

CN006 is the name given by the European Space Agency (ESA) in their reports on radio frequency interference (RFI) to an instance of RFI in the L-band spectral window at 1.413 GHz protected for passive use only. The source of the interference is located east of the Chinese city of Hangzhou in an area with radar installations. Its effect was initially indistinguishable from that of many such RFI sources observed by the ESA's SMOS and NASA's Soil Moisture Active Passive (SMAP) radiometers over China. However, in July 2020, the level of radiation increased dramatically reaching levels exceeding 1700000 K as reported by Soil Moisture and Ocean Salinity (SMOS) becoming the strongest source observed by SMOS. This article describes an analysis of this very strong source (a radar). It provides information to provide insight into an example of a well-defined source of RFI and illustrates the powerful capability of the SMAP radiometer receiver and RFI processing incorporated in it for identifying and understanding interference.

Radio Frequency Interface↗

LIMITS ON PROMPT, DISPERSED RADIO PULSES FROM GAMMA-RAY BURSTS

We have searched for prompt radio emission from nine gamma-ray bursts (GRBs) with a 12 m telescope at 1.4 GHz, with a time resolution of 64 {mu}s to 1 s. We detected single dispersed radio pulses with significances >6{sigma} in the few minutes following two GRBs. The dispersion measures of both pulses are well in excess of the expected Galactic values, and the implied rate is incompatible with known sources of single dispersed pulses. The arrival times of both pulses also coincide with breaks in the GRB X-ray light curves. A null trial and statistical arguments rule out random fluctuations as the origin of these pulses with >95% and {approx}97% confidence, respectively, although a simple population argument supports a GRB origin with confidence of only 2%. We caution that we cannot rule out radio frequency interference (RFI) as the origin of these pulses. If the single pulses are not related to the GRBs, we set an upper limit on the flux density of radio pulses emitted between 200 and 1800 s after a GRB of 1.27w {sup -1/2} Jy, where 6.4 Multiplication-Sign 10{sup -5} s < w < 32 Multiplication-Sign 10{sup -3} s is the pulse width. We set a limit of less than 760 Jy for long timescale (>1 s) variations. These limits are some of the most constraining at high time resolution and GHz frequencies in the early stages of the GRB phenomenon.

79 ASTRONOMY AND ASTROPHYSICS↗

CALIBRATION OF LOW-FREQUENCY, WIDE-FIELD RADIO INTERFEROMETERS USING DELAY/DELAY-RATE FILTERING

We present a filtering technique that can be applied to individual baselines of wide-bandwidth, wide-field interferometric data to geometrically select regions on the celestial sphere that contain primary calibration sources. The technique relies on the Fourier transformation of wide-band frequency spectra from a given baseline to obtain one-dimensional 'delay images', and then the transformation of a time-series of delay images to obtain two-dimensional 'delay/delay-rate images'. Source selection is possible in these images given appropriate combinations of baseline, bandwidth, integration time, and source location. Strong and persistent radio frequency interference (RFI) limits the effectiveness of this source selection owing to the removal of data by RFI excision algorithms. A one-dimensional, complex CLEAN algorithm has been developed to compensate for RFI-excision effects. This approach allows CLEANed, source-isolated data to be used to isolate bandpass and primary beam gain functions. These techniques are applied to data from the Precision Array for Probing the Epoch of Reionization as a demonstration of their value in calibrating a new generation of low-frequency radio interferometers with wide relative bandwidths and large fields of view.

79 ASTRONOMY AND ASTROPHYSICS↗

MULTIMOMENT RADIO TRANSIENT DETECTION

We present a multimoment technique for signal classification and apply it to the detection of fast radio transients in incoherently dedispersed data. Specifically, we define a spectral modulation index in terms of the fractional variation in intensity across a spectrum. A signal whose intensity is distributed evenly across the entire band has a lower modulation index than a spectrum whose intensity is localized in a single channel. We are interested in broadband pulses and use the modulation index to excise narrowband radio frequency interference by applying a modulation index threshold above which candidate events are removed. The technique is tested both with simulations and using data from known sources of radio pulses (RRAT J1928+15 and giant pulses from the Crab pulsar). The method is generalized to coherent dedispersion, image cubes, and astrophysical narrowband signals that are steady in time. We suggest that the modulation index, along with other statistics using higher order moments, should be incorporated into signal detection pipelines to characterize and classify signals.

79 ASTRONOMY AND ASTROPHYSICS↗

The community satellite. III

A number of technology experiments conducted with the satellite are discussed, giving attention to a very high resolution radiometer experiment, a radio frequency interference experiment, a millimeter wave propagation experiment, a COMSAT propagation experiment, a cesium bombardment ion engine experiment, an advanced thermal control flight experiment, a spacecraft attitude experiment, a radio beacon experiment, and environmental measurements experiments. Special investigations considered are related to the use of a spacecraft vibration accelerometer, a quartz crystal microbalance contamination monitor, and a television camera.

Source record↗

JPL 2-to-the-20th-power channel 300 MHz bandwidth digital spectrum analyzer

A million (two to the 20th power) channel, 300 MHz bandwidth, digital spectrum analyzer was considered. The design, fabrication, and maintenance philosophy of the modular, pipelined, fast fourier transform (FFT) hardware are described. The spectrum analyzer will be used to examine the region from 1.4 GHz to 26 GHz for radio frequency interference which may be harmful to present and future tracking missions of the Deep Space Network. The design has application to the search for extraterrestrial intelligence signals and radio science phenomena.

Morris, G. A., Jr.↗

Characterizing Interference in Radio Astronomy Observations through Active and Unsupervised Learning

In the process of observing signals from astronomical sources, radio astronomers must mitigate the effects of manmade radio sources such as cell phones, satellites, aircraft, and observatory equipment. Radio frequency interference (RFI) often occurs as short bursts (< 1 ms) across a broad range of frequencies, and can be confused with signals from sources of interest such as pulsars. With ever-increasing volumes of data being produced by observatories, automated strategies are required to detect, classify, and characterize these short "transient" RFI events. We investigate an active learning approach in which an astronomer labels events that are most confusing to a classifier, minimizing the human effort required for classification. We also explore the use of unsupervised clustering techniques, which automatically group events into classes without user input. We apply these techniques to data from the Parkes Multibeam Pulsar Survey to characterize several million detected RFI events from over a thousand hours of observation.

Doran, G.↗

Characterizing Interference in Radio Astronomy Observations through Active and Unsupervised Learning

In the process of observing signals from astronomical sources, radio astronomers must mitigate the effects of man-made radio sources such as cell phones, satellites, aircraft, and observatory equipment. Radio frequency interference (RFI) often occurs as short bursts (< 1 ms) across a broad range of frequencies, and can be confused with signals from sources of interest such as pulsars. With ever-increasing volumes of data being produced by observatories, automated strategies are required to detect, classify, and characterize these short “transient” RFI events. We investigate an active learning approach in which an astronomer labels events that are most confusing to a classifier, minimizing the human effort required for classification. We also explore the use of unsupervised clustering techniques, which automatically group events into classes without user input. We apply these techniques to data from the Parkes Multibeam Pulsar Survey to characterize several million detected RFI events from over a thousand hours of observation

Doran, G.↗

A Study of Near to Far Fields of JPL Deep Space Network (DSN) Antennas for RFI Analysis

This paper addresses the issue of calculating the gain and power distribution of DSN antennas in the Fresnel (middle zone) and Fraunhofer (far zone) as a function of the distance from the DSN antenna and the off-boresight angle. Calculating the near and mid fields of DSN antennas are of interest in the receive mode where the transmitting signals from nearby flying objects such as helicopters and airplanes transmitting in the DSN frequency range, interfere with the operation of sensitive RF receiving system of the DSN antennas, and in the transmit mode where fields from high-powered DSN antennas interfere with receivers on nearby flying objects such as helicopters or other systems. Computing the exact fields of a large DSN antenna is, in general, a very complicated and arduous task. Even far-field calculations, which are less complicated compared to near and mid zone fields, take considerable computer time. These calculations become even more involved and time-consuming in very near field and back field regions. We provide two approaches for addressing the radio frequency interference (RFI) issue. In this paper, actual fields in mid and far zones are calculated using a relatively simple formulation that is accurate enough for the purposes of RFI analysis. In a future paper, we study and develop simple reference models that provide upper limit bounds or envelopes of the far field patterns as a function of the antenna diameter and frequency, which can be used for obtaining the field at any given point in space.

aperture antennas↗

Sequential ranging integration times in the presence of CW interference in the ranging channel

The Deep Space Network (DSN), managed by the Jet Propulsion Laboratory for NASA, is used primarily for communication with interplanetary spacecraft. The high sensitivity required to achieve planetary communications makes the DSN very susceptible to radio-frequency interference (RFI). In this paper, an analytical model is presented of the performance degradation of the DSN sequential ranging subsystem in the presence of downlink CW interference in the ranging channel. A trade-off between the ranging component integration times and the ranging signal-to-noise ratio to achieve a desired level of range measurement accuracy and the probability of error in the code components is also presented. Numerical results presented illustrate the required trade-offs under various interference conditions.

Mathur, Ashok↗