Search NASA⌕ Search

SEARCH · Search NASA

Results for “Redox control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Redox and mineral controls on Fe and Ti isotopic fractionations during calc-alkaline magmatic differentiation

Titanium and Fe isotopic compositions of lavas from a calc-alkaline differentiation suite and corresponding mineral separates from the Rindjani Volcano, Indonesia show that Fe and Ti isotopic fractionations between minerals and melts are lower than those recorded in other suites at all stages of differentiation. Here, the limited isotopic fractionation for Ti is likely due to low-Ti magnetite and clinopyroxene being the dominant carriers of Ti in Rindjani lavas, as these minerals are thought to have limited equilibrium Ti isotopic fractionation relative to silicate magmas. Other magmatic differentiation suites controlled by removal of Ti-rich magnetite and characterized by a lesser role of clinopyroxene have larger Ti isotopic fractionations. This effect is an indirect consequence of the elevated Fe 3+ /Fe 2+ ratio of calc-alkaline magmas such as Rindjani, which promotes Fe 3+ incorporation into magnetite at the expense of Fe 2+ -Ti 4+ pairs, such that increased oxygen fugacity will subdue Ti isotopic fractionation in global magmatic series. Similarly, we find negligible Fe isotopic fractionation in Rindjani bulk rocks and mineral separates, unlike previous studies. This is also likely due to the oxidized nature of the Rindjani differentiation suite, which leads to similar Fe 3+ /Fe 2+ ratios in melt and minerals and decreases overall mineral-melt Fe fractionation factors. Paired Ti and Fe isotopic analyses may therefore represent a powerful tool to assess oxygen fugacity during differentiation, independent from Fe 3+ determinations of erupted samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanoparticulate Iron Oxyhydroxide Controls on Aqueous Redox Chemistry and Microbial Species Distribution and Activity in Natural Environments

Under anaerobic conditions that occur in soils and sediments, some microorganisms such as species of Shewanella and Geobacter pass electrons from respiration of organic carbon to iron oxyhydroxide minerals, causing the minerals to dissolve. Microbial iron reduction occurs within natural multi-species consortia, which alter their membership and biochemistry as the result of changes in their physical and chemical surroundings. The mineral electron acceptors are often poorly defined surface coatings and colloidal aggregates composed largely of nanoscale particles. We will investigate how differences in the nanomineralogy of the subsurface drive changes in the strain makeup of the microbial consortia responsible for iron reduction. Natural microbial communities are likely to include organism types with the range of genomic potential needed to profit from the expected suite of electron accepting minerals encountered in their habitats. As we predicted that redox potential is likely to be a mineral characteristic key to strain selection, we experimentally adjusted the redox potential of electrodes tested for reproducible patterns of organism response. We hypothesized that we can drive selection for the strain with cytochromes best optimized for electron transfer to the available mineral substrate. The biochemical basis for selection was investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlling solvation in conducting redox polymers for selective electrochemical separation of nitrate from wastewater

Selective capture of nitrate from wastewater is crucial for ensuring safe drinking water and promoting resource circularity. This study investigated alkylated polyaniline redox polymers as highly-selective electrosorbents to address this challenge. By controlling polymer solvation properties through synthetic functionalization, poly(N-methylaniline) (PNMA) achieves a nitrate uptake of up to 1.38 mmol g −1 -polymer and a separation factor of 7 over chloride. Poly(N-butylaniline) (PNBA) further enhances selectivity, achieving a separation factor beyond 14 due to increased hydrophobicity. The mechanisms underlying this selectivity are investigated using ab initio molecular dynamics (AIMD) and in-situ electrochemical quartz crystal microbalance (EQCM) studies, which reveal that hydrophobicity reduces chloride binding. A technoeconomic analysis indicates that methylation on PANI reduces nitrate removal costs by 50% compared to non-functionalized PANI, due to enhanced selectivity and uptake, and decreased energy consumption. PNMA electrodes demonstrate practical nitrate selectivity over 20 versus chloride in real wastewater, while avoiding sulfate binding. This study highlights the potential of controlling solvation at electroactive polymers to enhance nitrate selectivity, offering a promising design path for redox-mediated electrochemical separations.

chemical engineering↗

In situ characterization of nanoscale catalysts during anodic redox processes

Controlling the structure and composition of the anode is critical to achieving high efficiency and good long-term performance. In addition to being a mixed electronic and ionic conductor, the ideal anode material should act as an efficient catalyst for oxidizing hydrogen, carbon monoxide and dry hydrocarbons without de-activating through either sintering or coking. It is also important to develop novel anode materials that can operate at lower temperatures to reduce costs and minimized materials failure associated with high temperature cycling. We proposed to synthesize and characterize novel anodecermets materials based on ceria doped with Pr and/or Gd together with either a Ni or Cu metallic components. Ceria is a good oxidation catalyst and is an ionic conductor at room temperature. Doping it with trivalent rare earths such as Pr or Gd retards sintering and makes it a mixed ion conductor (ionic and electronic).

08 HYDROGEN↗

Controlling Covalency and Anion Redox Potentials through Anion Substitution in Li-Rich Chalcogenides

Development of next-generation battery technologies is imperative in the pursuit of a clean energy future. Toward that end, battery chemistries capable of multielectron redox processes are at the forefront of studies on Li-based systems to increase the gravimetric capacity of the cathode. Multielectron processes rely either on the iterative redox of transition metal cations or redox involving both the transition metal cations and the anionic framework. Targeting coupled cation and anion redox to achieve multielectron charge storage is difficult, however, because the structure–property relationships that govern reversibility are poorly understood. In an effort to develop fundamental understanding of anion redox, we have developed a materials family that displays tunable anion redox over a range of potentials that are dependent on a systematic modification of the stoichiometry. We report anion redox in the chalcogenide solid solution Li 2 FeS 2–y Se y , wherein the mixing of the sulfide and selenide anions yields a controllable shift in the high voltage oxidation plateau. Electrochemical measurements indicate that reversible multielectron redox occurs across the solid solution. X-ray absorption spectroscopy supports the oxidation of both iron and selenium at high states of charge, while Raman spectroscopy indicates the formation of Se–Se dimers in Li 2 FeSe 2 upon Li deintercalation, providing insight into the charge mechanism of the Li-rich iron chalcogenides. Anion substitution presents direct control over the functional properties of multielectron redox materials for next generation battery technologies.

25 ENERGY STORAGE↗

Toward Improved Catholyte Materials for Redox Flow Batteries: What Controls Chemical Stability of Persistent Radical Cations?

We report catholyte materials are used to store positive charge in energized fluids circulating through redox flow batteries (RFBs) for electric grid and vehicle applications. Energy-rich radical cations (RCs) are being considered for use as catholyte materials, but to be practically relevant, these RCs (that are typically unstable, reactive species) need to have long lifetimes in liquid electrolytes under the ambient conditions. Only few families of such energetic RCs possess stabilities that are suitable for their use in RFBs; currently, the derivatives of 1,4- dialkoxybenzene look the most promising. In this study, we examine factors that define the chemical and electrochemical stabilities for RCs in this family. To this end, we engineered rigid bis-annulated molecules that by design avoid the two main degradation pathways for such RCs, viz. their deprotonation and radical addition. The decay of the resulting RCs are due to the single remaining reaction: O-dealkylation. We establish the mechanism for this reaction and examine factors controlling its rate. In particular, we demonstrate that this reaction is initiated by the nucleophile attack of the counter anion on the RC partner. The reaction proceeds through the formation of the aroxyl radicals whose secondary reactions yield the corresponding quinones. The O-dealkylation accelerates considerably when the corresponding quinone has poor solubility in the electrolyte, and the rate depends strongly on the solvent polarity. Finally, our mechanistic insights suggest new ways of improving the RC catholytes through molecular engineering and electrolyte optimization.

25 ENERGY STORAGE↗

DWPF COAL-CARBON WASTE ACCEPTANCE CRITERIA LIMIT EVALUATION BASED ON EXPERIMENTAL WORK (TANK 48 IMPACT STUDY)

This report summarizes the results of both experimental and modeling studies performed using Sludge Batch 10 (SB10) simulants and FBSR product from Tank 48 simulant testing in order to develop higher levels of coal-carbon that can be managed by DWPF. Once the Fluidized Bed Steam Reforming (FBSR) process starts up for treatment of Tank 48 legacy waste, the FBSR product stream will contribute higher levels of coal-carbon in the sludge batch for processing at DWPF. Coal-carbon is added into the FBSR process as a reductant and some of it will be present in the FBSR product as unreacted coal. The FBSR product will be slurried in water, transferred to Tank Farm and will be combined with sludge and washed to produce the sludge batch that DWPF will process. The FBSR product is high in both water soluble sodium carbonate and unreacted coal-carbon. Most of the sodium carbonate is removed during washing but all of the coal-carbon will remain and become part of the DWPF sludge batch. A paper study was performed earlier to assess the impact of FBSR coal-carbon on the DWPF Chemical Processing Cell (CPC) operation and melter off-gas flammability by combining it with SB10-SB13. The results of the paper study are documented in Ref. 7 and the key findings included that SB10 would be the most difficult batch to process with the FBSR coal present and up to 5,000 mg/kg of coal-carbon could be fed to the melter without exceeding the off-gas flammability safety basis limits. In the present study, a bench-scale demonstration of the DWPF CPC processing was performed using SB10 simulants spiked with varying amounts of coal, and the resulting seven CPC products were fed to the DWPF melter cold cap and off-gas dynamics models to determine the maximum coal that can be processed through the melter without exceeding the off-gas flammability safety basis limits. Based on the results of these experimental and modeling studies, the presence of coal-carbon in the sludge feed to DWPF is found to have both positive (+) and negative (-) impact as summarized below: (-) Coal-carbon is a melter reductant. If excess coal-carbon is present, the resulting melter feed may be too reducing, potentially shortening the melter life. During this study, the Reduction/Oxidation Potential (REDOX) of the melter could be controlled by varying the ratio of nitric and formic acid. (-) The addition of coal-carbon increases the amount of nitric acid added and decreases the amount of formic acid added to control melter REDOX. This means that the CPC with the FBSR product is much more oxidizing than current CPC processing. In this study, adequate formic acid was present in all experiments to reduce mercury and manganese, two of the main goals of CPC processing. (-) Coal-carbon will be oxidized to carbon dioxide or carbon monoxide in the melter. The addition of coal-carbon to the FBSR product will lead to approximately 55% higher offgas production from formate, nitrate and carbon due to the decomposition of the carbon at the maximum levels in this testing. Higher offgas production could lead to higher cold cap coverage or melter foaming which could decrease melt rate. No testing was performed to evaluate the impact of the higher melter offgas flow. (+) The hydrogen production is greatly reduced in testing with coal as less formic acid is added in CPC processing. In the high acid run without coal, the peak hydrogen generation was 15 times higher than in the high acid run with added coal-carbon. (+) Coal-carbon is a less problematic reducing agent than formic acid, since the content of both carbon and hydrogen are important in evaluating the flammability of the melter offgas. Processing with coal-carbon decreases the amount of formic acid added in the CPC, leading to a lower flammability risk in processing with coal-carbon compared to the current DWPF flowsheet. (+) The seven SB10 formulations which were tested during the bench-scale CPC demonstration were all determined to be within the off-gas flammability safety basis limits during the 9X/5X off-gas surge for normal bubbled melter operation. The concentration of coal-carbon in these baseline melter feeds varied widely from 0 to 17,863 ppm, depending on the acid addition strategy used and the extent to which the required reductant (formic acid) was replaced with coal-carbon. All baseline feeds were redox-adjusted and three of them contained TOC higher than the current theoretical TSR limit of 18,900 ppm. (-) Additional coal-carbon was then added to each baseline feed until the calculated off-gas flammability equaled the safety basis limit of 60% of the LFL at the peak of off-gas surge ('max-coal'). In doing so, however, no counterbalancing nitrate was added, thus simulating the scenario where slugs of coal enter the melter as a result of uneven distribution of coal in the slurry.

01 COAL, LIGNITE, AND PEAT↗

Interim glycol flowsheet reduction/oxidation (redox) model for the Defense Waste Processing Facility (DWPF)

Control of the REDuction/OXidation (REDOX) state of glasses containing high concentrations of transition metals, such as High Level Waste (HLW) glasses, is critical in order to eliminate processing difficulties caused by overly reduced or overly oxidized melts. Operation of a HLW melter at Fe +2 /ΣFe ratios of between 0.09 and 0.33, a range which is not overly oxidizing or overly reducing, helps retain radionuclides in the melt, i.e. long-lived radioactive 99 Tc species in the less volatile reduced Tc 4+ state, 104 Ru in the melt as reduced Ru +4 state as insoluble RuO 2 , and hazardous volatile Cr 6+ in the less soluble and less volatile Cr +3 state in the glass. The melter REDOX control balances the oxidants and reductants from the feed and from processing additives such as antifoam. Currently, the Defense Waste Processing Facility (DWPF) is running a formic acid-nitric acid (FN) flowsheet where formic acid is the main reductant and nitric acid is the main oxidant. During decomposition formate and formic acid releases H 2 gas which requires close control of the melter vapor space flammability. A switch to a nitric acid-glycolic acid (GN) flowsheet is desired as the glycolic acid flowsheet releases considerably less H 2 gas upon decomposition. This would greatly simplify DWPF processing. Development of an EE term for glycolic acid in the GN flowsheet is documented in this study.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Nitric-glycolic flowsheet reduction/oxidation (redox) model for the defense waste processing facility (DWPF)

Control of the REDuction/OXidation (REDOX) state of glasses containing high concentrations of transition metals, such as High Level Waste (HLW) glasses, is critical in order to eliminate processing difficulties caused by overly reduced or overly oxidized melts. Operation of a HLW melter at Fe +2 /ΣFe ratios of between 0.09 and 0.33, retains radionuclides in the melt and thus the final glass. Specifically, long-lived radioactive 99 Tc species are less volatile in the reduced Tc 4+ state as TcO 2 than as NaTcO 4 or Tc 2 O 7 , and ruthenium radionuclides in the reduced Ru 4+ state are insoluble RuO 2 in the melt which are not as volatile as NaRuO 4 where the Ru is in the +7 oxidation state. Similarly, hazardous volatile Cr 6+ occurs in oxidized melt pools as Na 2 CrO 4 or Na 2 Cr 2 O 7 , while the Cr +3 state is less volatile and remains in the melt as NaCrO 2 or precipitates as chrome rich spinels. The melter REDOX control balances the oxidants and reductants from the feed and from processing additives such as antifoam.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Complementing Nanoscale Galvanic Exchange with Redox Manipulation toward Architectural Control of Multimetallic Hollow Nanostructures

Galvanic exchange occurring within the confinement by nanoparticulate templates provides a unique pathway to controllably transform solid metallic nanoparticles into architecturally more sophisticated multimetallic hollow nanostructures under facile reaction conditions. As such, in this Minireview, we elaborately discuss how the nanoparticle-templated galvanic exchange can be deliberately coupled with redox manipulation to synthesize a large library of complex multimetallic hollow nanostructures exhibiting precisely tailored architectures and compositions, with a particular emphasis on important mechanistic insights concerning the dynamic interplay among multiple structure-remodeling processes that synergistically dictate the versatile nanoparticle transforming behaviors during kinetically and regioselectively modulated galvanic exchange reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pentavalent Uranium Enriched Mineral Surface under Electrochemically Controlled Reducing Environments

Redox reactions of uranium (U) in aqueous environments have important impacts on the mobility and isotopic fractionation of U in the geosphere. Pentavalent U as the cationic uranyl ion, UO 2 +, is rarely observed in naturally occurring samples because of its limited lifetime, but it may be an important intermediate state controlling the redox kinetics between hexavalent and tetravalent U. Increasing evidence has indicated that U(V) can be stabilized under laboratory conditions. Here, we showed that U(V) is the dominant species on the magnetite (Fe 3 O 4 ) surface under reducing conditions controlled by electrochemical methods. Cyclic voltammetry reveals coupled redox peaks corresponding to the U(VI)O 2 2+ /U(V)O 2+ one-electron redox reaction. Magnetite electrodes polarized at a series of potentials to reduce U(VI)O 2 2+ were characterized by X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), and Auger electron mapping. Overall, the results showed that up to twice the amount of U(V) to U(VI) was present on the magnetite surface. U(V) adopted a typical uranyl-type structure, and the U coverage on the magnetite surface increased with decreasing potentials. The formation of mixed-valence U(V)/U(VI) species on the surface of magnetite may hinder the U(V) disproportionation reaction, thereby eliminating the presence of tetravalent U. These results show that U(V) can exist over short time scales as the dominant U species on mineral surfaces under selected reducing conditions by the controlled polarization of a mineral electrode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two disulfide-reducing pathways are required for the maturation of plastid c -type cytochromes in Chlamydomonas reinhardtii

Abstract In plastids, conversion of light energy into ATP relies on cytochrome f, a key electron carrier with a heme covalently attached to a CXXCH motif. Covalent heme attachment requires reduction of the disulfide-bonded CXXCH by CCS5 and CCS4. CCS5 receives electrons from the oxidoreductase CCDA, while CCS4 is a protein of unknown function. In Chlamydomonas reinhardtii, loss of CCS4 or CCS5 yields a partial cytochrome f assembly defect. Here, we report that the ccs4ccs5 double mutant displays a synthetic photosynthetic defect characterized by a complete loss of holocytochrome f assembly. This defect is chemically corrected by reducing agents, confirming the placement of CCS4 and CCS5 in a reducing pathway. CCS4-like proteins occur in the green lineage, and we show that HCF153, a distant ortholog from Arabidopsis thaliana, can substitute for Chlamydomonas CCS4. Dominant suppressor mutations mapping to the CCS4 gene were identified in photosynthetic revertants of the ccs4ccs5 mutants. The suppressor mutations yield changes in the stroma-facing domain of CCS4 that restore holocytochrome f assembly above the residual levels detected in ccs5. Because the CCDA protein accumulation is decreased specifically in the ccs4 mutant, we hypothesize the suppressor mutations enhance the supply of reducing power through CCDA in the absence of CCS5. We discuss the operation of a CCS5-dependent and a CCS5-independent pathway controlling the redox status of the heme-binding cysteines of apocytochrome f.

Genetics & Heredity↗

Highly Active and Stable Single Atom Rh 1 /CeO 2 Catalyst for CO Oxidation during Redox Cycling

We report a single atom Rh 1 /CeO 2 catalyst prepared by the high temperature (800 °C) atom trapping (AT) method which is stable under both oxidative and reductive conditions. Infrared spectroscopic and electron microscopy characterization revealed the presence of exclusively ionic Rh species. These ionic Rh species are stable even under reducing conditions (CO at 300 °C) due to the strong interaction between Rh and CeO 2 achieved by the AT method, leading to high and reproducible CO oxidation activity regardless of whether the catalyst is reduced or oxidized. In contrast, ionic Rh species in catalysts synthesized by a conventional impregnation approach (e. g., calcined at 350 °C) can be readily reduced to form Rh nanoclusters/nanoparticles, which are easily oxidized under oxidative conditions, leading to loss of catalytic performance. The single atom Rh 1 /CeO 2 catalysts synthesized by the AT method do not exhibit changes during redox cycling hence are promising catalysts for emission control where redox cycling is encountered, and severe oxidation (fuel cut) leads to loss of performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlling the Charge State and Redox Properties of Supported Polyoxometalates via Soft Landing of Mass Selected Ions

We investigate the controlled deposition of Keggin polyoxometalate (POM) anions, PMo12O403- and PMo12O402-, onto different self-assembled monolayer (SAM) surfaces via soft landing of mass-selected ions. Utilizing in situ infrared reflection absorption spectroscopy (IRRAS), ex situ cyclic voltammetry (CV) and electronic structure calculations, we examine the structure and charge retention of supported multiply-charged POM anions and characterize the redox properties of the modified surfaces. SAMs of alkylthiol (HSAM), perfluorinated alkylthiol (FSAM), and alkylthiol terminated with NH3+ functional groups (NH3+SAM) are chosen as model substrates for soft landing to examine the factors which influence the immobilization and charge retention of multiply charged anionic molecules. The distribution of charge states of POMs on different SAM surfaces are determined by comparing the IRRAS spectra with vibrational spectra calculated using density functional theory (DFT). In contrast to the results obtained previously for multiply charged cations, soft landed anions are found to retain charge on all three SAM surfaces. This charge retention is attributed to the substantial electron binding energy of the POM anions. Investigation of redox properties by CV reveals that, while surfaces prepared by soft landing exhibit similar features to those prepared by adsorption of POM from solution, the soft landed POM2- has a pronounced shift in oxidation potential compared to POM3- for one of the redox couples. These results demonstrate that ion soft landing is uniquely suited for precisely controlled preparation of substrates with specific electronic and chemical properties that cannot be achieved using conventional deposition techniques.

charge retention↗

The superatomic state beyond conventional magic numbers: Ligated metal chalcogenide superatoms

The field of cluster science is drawing increasing attention due to the strong size and composition-dependent properties of clusters and the exciting prospect of clusters serving as the building blocks for materials with tailored properties. However, identifying a unifying central paradigm that provides a framework for classifying and understanding the diverse behaviors is an outstanding challenge. One such central paradigm is the superatom concept that was developed for metallic and ligand-protected metallic clusters. The periodic electronic and geometric closed shells in clusters result in their properties being based on the stability they gain when they achieve closed shells. This stabilization results in the clusters having a well-defined valence allowing them to be classified as superatoms – thus, extending the periodic table to a third dimension. This perspective focuses on extending the superatomic concept to ligated metal-chalcogen clusters that have recently been synthesized in solutions and form assemblies with counterions that have wide-ranging applications. Here we illustrate that the periodic patterns emerge in the electronic structure of ligated metal-chalcogenide clusters. The stabilization gained by the closing of their electronic shells allows for the prediction of their redox properties. Further investigations reveal how the selection of ligands may control the redox properties of the superatoms. These ligated clusters may serve as chemical dopants for two-dimensional semiconductors to control their transport characteristics. Superatomic molecules of multiple metal-chalcogen superatoms allow for the formation of nano pn junctions ideal for directed transport and photon harvesting. As a result, the perspective outlines future developments, including the synthesis of magnetic superatoms.

36 MATERIALS SCIENCE↗