Search NASA⌕ Search

SEARCH · Search NASA

Results for “Rocket Trajectories”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

SSME propulsion performance reconstruction techniques

In view of the complex flight operation of the Space Shuttle propulsion system together with an expected launch rate increase, the flight performance reconstruction process needs to be performed by automated computer programs. These programs must have the capability to quickly and reliably determine the true behavior of the various components of the propulsion system. For the flight reconstruction, measured values from the solid rocket motors, liquid engines, and trajectory are appraised through the Kalman filter technique to identify the most likely flight propulsion performance. A more detailed data collection program for the single SSME engine captive test firing evaluation is scheduled for startup in September of 1988. Engine performance evaluation for the captive test firing requires a reconstruction process that is similar to the process that is used for the flight reconstruction. Analytical tools that may be used to reconstruct a propulsion system's true performance under flight and/or test conditions are described.

Temple, Enoch C.↗
NASA NTRS1993

Short-duration low-gravity experiments - Time scales, challenges and results

Short-duration low-gravity experiments can be conducted either in drop tubes and drop towers, or on sounding rockets and aircraft on ballistic trajectories. While these facilities offer more frequent flight opportunities and higher cost effectiveness than orbiting spacecraft, their relatively short low-gravity times are often perceived as limiting their utility to only a narrow range of applications and research areas. In this review it is shown, based on scaling laws for diffusive transport of momentum, species and heat, radiative heat transfer and capillarity-driven motion, that with proper consideration of the characteristic length scales, a host of phenomena can be meaningfully investigated during a few seconds. This usefulness of short-duration low-gravity facilities is illustrated with numerous results of recent studies of solidification, combustion, transport in multiphase systems, statics and dynamics of liquid surfaces, magnetic Benard convection, fluid management, transport properties and the graviperception in cells.

Rosenberger, F.↗
NASA NTRS2003

Study of a High-Energy Upper Stage for Future Shuttle Missions

Space Shuttle Orbiters are likely to remain in service to 2020 or beyond for servicing the International Space Station and for launching very high value spacecraft. There is a need for a new STS-deployable upper stage that can boost certain Orbiter payloads to higher energy orbits, up to and including Earth-escape trajectories. The inventory of solid rocket motor Inertial Upper Stages has been depleted, and it is unlikely that a LOX/LH2-fueled upper stage can fly on Shuttle due to safety concerns. This paper summarizes the results of a study that investigated a low cost, low risk approach to quickly developing a new large upper stage optimized to fly on the existing Shuttle fleet. Two design reference missions (DRMs) were specified: the James Webb Space Telescope (JWST) and the Space Interferometry Mission (SIM). Two categories of upper stage propellants were examined in detail: a storable liquid propellant and a storable gel propellant. Stage subsystems 'other than propulsion were based largely on heritage hardware to minimize cost, risk and development schedule span. The paper presents the ground rules and guidelines for conducting the study, the preliminary conceptual designs margins, assessments of technology readiness/risk, potential synergy with other programs, and preliminary estimates of development and production costs and schedule spans. Although the Orbiter Columbia was baselined for the study, discussion is provided to show how the results apply to the remaining STS Orbiter fleet.

Dressler, Gordon A.↗
NASA NTRS2009

Liquid-Propellant Rocket Engine Throttling: A Comprehensive Review

Liquid-Propellant Rocket Engines (LREs) are capable of on-command variable thrust or thrust modulation, an operability advantage that has been studied intermittently since the late 1930s. Throttleable LREs can be used for planetary entry and descent, space rendezvous, orbital maneuvering including orientation and stabilization in space, and hovering and hazard avoidance during planetary landing. Other applications have included control of aircraft rocket engines, limiting of vehicle acceleration or velocity using retrograde rockets, and ballistic missile defense trajectory control. Throttleable LREs can also continuously follow the most economical thrust curve in a given situation, compared to discrete throttling changes over a few select operating points. The effects of variable thrust on the mechanics and dynamics of an LRE as well as difficulties and issues surrounding the throttling process are important aspects of throttling behavior. This review provides a detailed survey of LRE throttling centered around engines from the United States. Several LRE throttling methods are discussed, including high-pressure-drop systems, dual-injector manifolds, gas injection, multiple chambers, pulse modulation, throat throttling, movable injector components, and hydrodynamically dissipative injectors. Concerns and issues surrounding each method are examined, and the advantages and shortcomings compared.

Casiano, Matthew↗
NASA NTRS1974

Performance capability of laser-powered launch vehicles using vertical ascent trajectories

The use of a ground-based high-power laser source to power a vertically launched rocket vehicle is investigated. By using a vertical ascent trajectory, only a single laser source is required. The vertical ascent mode is not applicable to earth orbit destinations but is applicable to missions beyond earth escape. Performance and trajectory characteristics are examined for vertical trajectories to earth escape and solar escape (which may be of interest in the future for radioactive waste disposal). Specific impulse values from 2000 to 5000 seconds are considered. With these values, a single-stage vehicle can deliver payloads to earth escape and beyond, but extremely high power sources (gigawatts) are required.

Spurlock, O. F.↗
NASA NTRS1993

Trajectory optimization for the National Aerospace Plane

The objective of this second phase research is to investigate the optimal ascent trajectory for the National Aerospace Plane (NASP) from runway take-off to orbital insertion and address the unique problems associated with the hypersonic flight trajectory optimization. The trajectory optimization problem for an aerospace plane is a highly challenging problem because of the complexity involved. Previous work has been successful in obtaining sub-optimal trajectories by using energy-state approximation and time-scale decomposition techniques. But it is known that the energy-state approximation is not valid in certain portions of the trajectory. This research aims at employing full dynamics of the aerospace plane and emphasizing direct trajectory optimization methods. The major accomplishments of this research include the first-time development of an inverse dynamics approach in trajectory optimization which enables us to generate optimal trajectories for the aerospace plane efficiently and reliably, and general analytical solutions to constrained hypersonic trajectories that has wide application in trajectory optimization as well as in guidance and flight dynamics. Optimal trajectories in abort landing and ascent augmented with rocket propulsion and thrust vectoring control were also investigated. Motivated by this study, a new global trajectory optimization tool using continuous simulated annealing and a nonlinear predictive feedback guidance law have been under investigation and some promising results have been obtained, which may well lead to more significant development and application in the near future.

Lu, Ping↗
NASA NTRS1993

Alternate vehicles for engine/vehicle optimization

The space shuttle main engine, full flow staged combustion, integrated modular engine concept, split expander, and expander bleed rocket engine cycles were studied for use on Single-Stage-to-Orbit fully reusable vehicles. The vehicle uses vertical take-off and horizontal landing and liquid hydrogen rockets for propulsion. The PROPSIZE computer code was modified for use on the available computers. Vehicle sizing was done after trajectory optimization for various engine designs. The various rocket engine cycles were compared and it was found that the full flow staged combustion cycle had the lowest vehicle dry mass. The split expander cycle could have advantages in safety and cooling which could make it the preferred choice in some cases. Comparison to previous work with two-stage heavy-lift vehicles showed that the same ranking of the cycles was found for both vehicle concepts.

Venkatasubramanyam, G.↗
NASA NTRS1988

A study to evaluate STS heads-up ascent trajectory performance employing a minimum-Hamiltonian optimization strategy

A study was conducted to evaluate the performance implications of a heads-up ascent flight design for the Space Transportation System, as compared to the current heads-down flight mode. The procedure involved the use of the Minimum Hamiltonian Ascent Shuttle Trajectory Evaluation Program, which is a three-degree-of-freedom moment balance simulation of shuttle ascent. A minimum-Hamiltonian optimization strategy was employed to maximize injection weight as a function of maximum dynamic pressure constraint and Solid Rocket Motor burnrate. Performance Reference Mission Four trajectory groundrules were used for consistency. The major conclusions are that for heads-up ascent and a mission nominal design maximum dynamic pressure value of 680 psf, the optimum solid motor burnrate is 0.394 ips, which produces a performance enhancement of 4293 lbm relative to the baseline heads-down ascent, with 0.368 ips burnrate solid motors and a 680 psf dynamic pressure constraint. However, no performance advantage exists for heads-up flight if the current Solid Rocket Motor target burnrate of 0.368 ips is used. The advantage of heads-up ascent flight employing the current burnrate is that Space Shuttle Main Engine throttling for dynamic pressure control is not necessary.

Sinha, Sujit↗
NASA NTRS1972

Nozzle exhaust plume backscatter experiment using the JPL Molsink facility

Qualitative tests were made by injecting water through a rocket nozzle wall, and the droplet trajectories were observed photographically. These tests were conducted for nozzles in which boundary layer flow is significant. The tests indicated that both gases and particulate matter will be found in the region outside of the plume boundaries, and can be calculated using current analytical techniques. A test program is being conducted to measure the distribution of exhaust gases from small nozzles using an electron beam/photomultiplier system and a matrix of quartz crystal microbalances. Calibration tests, using simulated hydrazine exhaust product gas mixtures, were also conducted. The test program and results of the pumping calibration tests with hydrazine (simulated hydrazine exhaust products) are reported.

Simon, W.↗
NASA NTRS1982

Black Brant X third stage dispersion dynamics

The successful development of the Black Brant X (BBX) launch vehicle resulted from the application of a gyroscopically stabilized, unguided third stage motor configuration. Design analyses indicated sufficient gyroscopic stability and acceptable impact dispersion could be realized by optimizing second/third stage separation time. By flying an unguided third stage motor, significant program cost savings were realized. One flight test and two operational missions demonstrated the feasibility of utilizing gyroscopic stability to achieve satisfactory trajectory dispersion on a high performance rocket. A detailed assessment of the major dispersion contributors identified for the first three BBX missions is presented, offering important insight into the dispersion sensitivity of unguided, spin-stabilized flight.

Montag, W. H.↗
NASA NTRS1996

Flight control augmentation for AFT CG launch vehicles

The Space Shuttle was only the first step in achieving routine access to space. Recently, the NASA Marshall Space Flight Center (MSFC) has been studying a whole spectrum of new launch vehicles (L/V's) for space transportation. Some of these could transport components of the Space Station to orbit, and some could take us to Mars and beyond to boldly expand our frontiers of knowledge. In all our future launch vehicle (L/V) designs, decreasing the structural weight will always be of great concern. This is tantamount to increased payload capability, which in turn means reduced cost-per-pound to orbit. One very significant increase in payload capability has been defined. In a L/V recently studied at MSFC it has been shown that a sizable weight savings can be realized by a rearrangement of the internal propellant tanks. Studies have been conducted both at MSFC and at Martin Marietta Corporation, maker of the Space Shuttle External Tank (ET) which show that a very substantial weight can be saved by inverting the relative positions of the liquid hydrogen (LH2) and the liquid oxygen (LOX) propellant tanks in a particular L/V studied. As the vehicle sits on the launch pad, in the conventional configuration the heavier LOX tank is located on top of the lighter LH2. This requires a heavy structural member between the two tanks to prevent the lighter LH2 tank from being crushed. This configuration also requires large, long, and even drag producing LOX feed lines running the length of the vehicle on the exterior fuselage. If the relative position of the propellant tanks is inverted, both the heavy structural separation member and the long LOX feed lines could be deleted. While the structures community at MSFC was elated with this finding, the LOX tank aft configuration gave the vehicle an aft center-of-gravity (cg) location which surfaced controllability concerns. In the conventional configuration the L/V is controlled in the ascent trajectory by the gimballing of its rocket engines. Studies have been conducted at MSFC which showed that the resulting aft cg configured L/V would not be adequately controllable with the engine gimballing alone.

Barret, Chris↗
NASA NTRS1959

Preliminary Analysis of the Effect of Flow Separation Due to Rocket Jet Pluming on Aircraft Dynamic Stability During Atmospheric Exit

A theoretical investigation was conducted to determine the effects of body boundary-layer separation resulting from a highly underexpanded jet on the dynamic stability of a typical rocket aircraft during an atmospheric exit trajectory. The particular flight condition studied on a digital computer for five degrees of freedom was at Mach 6.0 and 150,000 feet. In view of the unknown character of the separated flow field, two estimates of the pressures in the separated region were made to calculate the unbalanced forces and moments. These estimates, based on limited fundamental zero-angle-of-attack studies and observations, are believed to cover what may be the actual case. In addition to a fixed control case, two simulated pilot control inputs were studied: rate-limited and instantaneous responses. The resulting-motions with and without boundary-layer separation were compared for various initial conditions. The lower of the assumed misalinement forces and moments led to a situation whereby a slowly damped motion could be satisfactorily controlled with rate-limited control input. The higher assumption led to larger amplitude, divergent motions when the same control rates were used. These motions were damped only when the instantaneous control responses were assumed.

Dryer, Murray↗
NASA NTRS2003

Asteroids as Propulsion Systems of Space Ships

Currently, rockets are used to change the trajectory of space ships and probes. This method is very expensive and requires a lot of fuel, which limits the feasibility of space stations, interplanetary space ships, and probes. Sometimes space probes use the gravity field of a planet However, there am only nine planets in the Solar System, all separated by great distances. There are tons of millions of asteroids in outer space. This paper offers a revolutionary method for changing the trajectory of space probes. The method uses the kinetic or rotary energy of asteroids, comet nuclei, meteorites or other space bodies (small planets, natural planetary satellites, space debris, etc.) to increase (to decrease) ship (probe) speed up to 1000 m/sec (or more) and to achieve any new direction in outer space. The flight possibilities of space ships and probes are increased by a factor of millions.

Bolonkin, Alexander↗