Search NASA⌕ Search

SEARCH · Search NASA

Results for “S(OF)2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

D1((2)B2g) to D0((2)Au) Fluorescence from the Matrix-Isolated Perylene Cation Following Laser Excitation into the D5(2)B3g) and D2 ((2)B3g) Electronic States

Fluorescence spectra of the perylene cation, pumped by direct laser excitation via the D(sub 2)((2)B(sub 3g)) (left arrow) D(sub 0)((2)A(sub u)) and D(sub 5)(2)B(sub 3g)) (left arrow) D(sub 0)((2)A(sub u)) transitions, are presented. Direct excitation into the D5 or D2 states is followed by rapid non-radiative relaxation to D1 that, in turn,relaxes radiatively. Excitation spectroscopy across the D(sub 2)((2)B(sub 3g)) (left arrow) D(sub 0)((2)A(sub u)) transition near 730 nm shows that site splitting plays little or no role in determining the spectral substructure in the ion spectra. Tentative assignments for ground state vibrational frequencies are made by comparison of spectral intervals with calculated normal mode frequencies.

Chillier, Xavier D. F.↗
DOE OSTI2023

Preparation of SiO 2 —TiO 2 composite aerogels and SiO 2 @TiO 2 core-shell aerogels with high thermal stability and enhanced photocatalysis

According to one inventive concept, a method for forming an aerogel includes forming a SiO 2 gel, forming a mixture of the SiO 2 gel and a TiCl 4 -derived precursor sol, wherein the TiCl 4 sol is comprised of TiCl 4 and a solvent, forming a SiO 2 /TiO 2 wet gel, drying the SiO 2 /TiO 2 wet gel, and heating the dried SiO 2 /TiO 2 gel.

Neto, Elias Paiva Ferreira↗
DOE OSTI2021

Visually resolving the direct Z-scheme heterojunction in CdS@ZnIn 2 S 4 hollow cubes for photocatalytic evolution of H 2 and H 2 O 2 from pure water

We report the direct Z-scheme heterojunction has been recently emerging as an appealing architecture for photocatalysts design. Its efficiency depends on the interfacial and structural features of the photocatalysts. Herein, the two-dimensional ZnIn 2 S 4 nanosheets are grown on the surface of CdS hollow cubes to construct the CdS@ZnIn 2 S 4 hierarchical hollow photocatalysts with chemically bonded interface. The visualized measurements based on spatial-resolved surface photovoltage spectroscopy, combined with other spectroscopic and simulation investigations, clearly disclose that the CdS@ZnIn 2 S 4 hollow cubes constitute a highly efficient direct Z-scheme system. This accounts for the stoichiometric generation of H 2 and H 2 O 2 from pure water observed for the CdS@ZnIn 2 S 4 sulfide-only photocatalysts under visible light irradiation with an apparent quantum efficiency of 1.63 % at 400 nm. The present work demonstrates an effective protocol to achieve comprehensive insights into the charge transfer route at semiconductor heterojunction, and offers a viable way for constructing efficient sulfide-only photocatalysts for driving water splitting reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Single crystal neutron and magnetic measurements of Rb 2 Mn 3 (VO 4 ) 2 CO 3 and K 2 Co 3 (VO 4 ) 2 CO 3 with mixed honeycomb and triangular magnetic lattices

Two new alkali vanadate carbonates with divalent transition metals have been synthesized as large single crystals via a high-temperature (600 °C) hydrothermal technique. Compound I, Rb 2 Mn 3 (VO 4 ) 2 CO 3 , crystallizes in the trigonal crystal system in the space group P[3 with combining macron]1c, and compound II, K 2 Co 3 (VO 4 ) 2 CO 3 , crystallizes in the hexagonal space group P6 3 /m. Both structures contain honeycomb layers and triangular lattices made from edge-sharing MO 6 octahedra and MO 5 trigonal bipyramids, respectively. The honeycomb and triangular layers are connected along the c-axis through tetrahedral [VO 4 ] groups. The MO 5 units are connected with each other by carbonate groups in the ab-plane by forming a triangular magnetic lattice. The difference in space groups between I and II was also investigated with Density Functional Theory (DFT) calculations. Single crystal magnetic characterization of I indicates three magnetic transitions at 77 K, 2.3 K, and 1.5 K. The corresponding magnetic structures for each magnetic transition of I were determined using single crystal neutron diffraction. At 77 K the compound orders in the MnO 6 -honeycomb layer in a Néel-type antiferromagnetic orientation while the MnO 5 triangular lattice ordered below 2.3 K in a colinear ‘up–up–down’ fashion, followed by a planar ‘Y’ type magnetic structure. K 2 Co 3 (VO 4 ) 2 CO 3 (II) exhibits a canted antiferromagnetic ordering below T N = 8 K. Here, the Curie–Weiss fit (200–350 K) gives a Curie–Weiss temperature of –42 K suggesting a dominant antiferromagnetic coupling in the Co 2+ magnetic sublattices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Long-range three-dimensional magnetic structures of the spin S =1 hexamer cluster fedotovite-like A 2 Cu 3 O ( SO 4 ) 3 ( A 2 = K 2 , NaK, Na 2 ): A neutron diffraction study

The crystal and magnetic structures of the spin S = 1 hexamer cluster fedotovite-like A 2 Cu 3 O(SO 4 ) 3 (A 2 = K 2 , NaK, Na 2 ) were studied by neutron powder diffraction at temperatures 1.6–290 K. The crystal structures in all compounds are well refined in the monoclinic space group C2/c. The basic magnetic units of the compounds are copper hexamers, which are coupled by weak superexchange interactions giving rise to three-dimensional long-range magnetic order below 3.0 < T N < 4.7 K. We have found that for A 2 = K 2 and NaK the propagation vector of the magnetic structure is k = [0,0,0], and the coupling of the Cu hexamers is ferromagnetic (FM) along the ab diagonal and antiferromagnetic along the bc diagonal. In contrast, for A = Na the propagation vector is k = [0,1,0], and the Cu hexamers are coupled antiferromagnetically (AFM) along the ab diagonal. Further, the hexamers are formed by three Cu pairs arranged along the b axis. The calculated spin expectation values $\langle s \rangle$ for the simplest symmetric spin Hamiltonian (obtained from inelastic neutron spectroscopy) of the isolated hexamers in the mean field amounted to $\langle s \rangle$ = 3/8 for the side spins Cu1 and Cu2 and $\langle s \rangle$ = 1/4 for Cu3 in the middle. The Cu spins are FM coupled in pairs and AFM between neighboring pairs. The experimental magnetic moments of the Cu 2+ ions turn out to be not completely collinear due to spin frustrations within the weak interhexamer interactions. The sizes of magnetic moments of Cu in the hexamers determined from the diffraction data are in fair agreement with the calculated values.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Highly selective Si 3 N 4 /SiO 2 etching using an NF 3 /N 2 /O 2 /H 2 remote plasma. II. Surface reaction mechanism

Developing processes for highly selective etching of silicon nitride (Si 3 N 4 ) with respect to silicon dioxide (SiO 2 ) is a major priority for semiconductor fabrication processing. In this paper and in Paper I [Volynets et al., J. Vac. Sci. Technol. A 38, 023007 (2020)], mechanisms are discussed for highly selective Si3N4 etching in a remote plasma based on experimental and theoretical investigations. The Si 3 N 4 /SiO 2 etch selectivity of up to 380 was experimentally produced using a remote plasma sustained in NF 3 /N 2 /O 2 /H 2 mixtures. A selectivity strongly depends on the flow rate of H 2 , an effect attributed to the formation of HF molecules in vibrationally excited states that accelerate etching reactions. Based on experimental measurements and zero-dimensional plasma simulations, an analytical etching model was developed for etch rates as a function of process parameters. Reaction rates and sticking coefficients were provided by quantum chemistry models and also fitted to the experimental results. Etch rates from the analytical model show good agreement with the experimental results and demonstrate why certain etchants accelerate or inhibit the etch process. In particular, the modeling shows the important role of HF molecules in the first vibrationally excited state [HF( v = 1)] in achieving high Si 3 N 4 /SiO 2 selectivity.

42 ENGINEERING↗
DOE OSTI2024

High-temperature Raman spectroscopy of K 2 Ca(CO 3 ) 2 bütschliite and Na 2 Ca 2 (CO 3 ) 3 shortite

Raman spectra of Na 2 Ca 2 (CO 3 ) 3 shortite and K 2 Ca(CO 3 ) 2 bütschliite were measured to 715°C and 740°C respectively, under vacuum. The vibrational spectra demonstrate that shortite converts to nyerereite (Na 2 Ca(CO 3 ) 2 ) and calcite at 535°C. This assemblage is stable to ~700°C, where nyerereite begins to decompose. Bütschliite converts to the isochemical phase fairchildite at 570°C, which is stable to 665°C, where it decomposes to an assemblage of K 2 CO 3 and CaO. The variation of anharmonicity between different vibrational modes of each of the low temperature phases is assessed, and these yield insights into inter-carbonate group couplings. In conclusion, both fairchildite and nyerereite exhibit spectral features consistent with extensive disordering.

58 GEOSCIENCES↗
DOE OSTI2023

Physical and Flow Properties of Glass-Forming Chemicals (V 2 O 5 , SnO, SnO 2 , Cr 2 O 3 , FeCr 2 O 4 , and ZrSiO 4 ) and Mixtures

For an efficient nuclear waste vitrification process at the Waste Treatment and Immobilization Plant (WTP) on the Hanford Site, proper selection and consistent supply of glass-forming chemicals (GFCs) are crucial. Thorough characterization of the GFCs is required to reduce risks in operation of the vitrification facility. Low-activity waste (LAW) will be blended with GFCs to form slurry feeds and then fed to melters and vitrified. To enhance properties of waste glasses, new chemicals are being introduced to the current GFC mixture. In this study, three new GFCs were evaluated for enhanced LAW glass formulations: chromium oxide (Cr 2 O 3 ), vanadium oxide (V 2 O 5 ), and stannic oxide (SnO 2 ). These three oxide components are included in enhanced waste glass formulations, and GFCs with the appropriate physical and flow properties are needed. As a starting point, single metal oxide GFCs, Cr 2 O 3 , V 2 O 5 , and SnO 2 , were sourced and tested. Then, alternative sources of Sn and Cr (SnO and FeCr 2 O 4 ) were tested along with an alternative zircon source (ZrSiO 4 ). This report documents the work performed to collect physical and flow property data on these new GFCs and melter feed slurries generated using these GFCs and simulated low-activity wastes.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Photocarrier Dynamics in MoTe 2 Nanofilms with 2 H and Distorted 1 T Lattice Structures

Molybdenum telluride (MoTe 2 ), an emerging layered two-dimensional (2D) material, possesses excellent phase-changing properties. Previous studies revealed its reversible transition between 2H and 1T' phases with a transition energy as small as 35 meV. Since 1T'-MoTe 2 is metallic, it can serve as an electrical contact for semiconducting 2H-MoTe 2 -based optoelectronic devices. Here, the photocarrier dynamics in MoTe 2 nanofilms synthesized by a one-step method and with coexisting multiple phases are investigated by transient absorption measurements. Both the energy relaxation time and the recombination lifetime of the excitons are shorter in the 1T'-MoTe 2 compared to its 2H phase. Furthermore, these results provide information on the different photocarrier dynamical properties of these two phases, which is important for future 2D optoelectronic and phase-change electronic devices based on MoTe 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2022

Facile synthesis and phase stability of Cu-based Na 2 Cu(SO 4 ) 2 · x H 2 O ( x = 0–2) sulfate minerals as conversion type battery electrodes

Mineral exploration forms a key approach for unveiling functional battery electrode materials. The synthetic preparation of naturally found minerals and their derivatives can aid in designing of new electrodes. Herein, saranchinaite Na 2 Cu(SO 4 ) 2 and its hydrated derivative kröhnkite Na 2 Cu(SO 4 ) 2 ·2H 2 O bisulfate minerals have been prepared using a facile spray drying route for the first time. The phase stability relation during the (de)hydration process was examined synergising in situ X-ray diffraction and thermochemical studies. Kröhnkite forms the thermodynamically stable phase as the hydration of saranchinaite to kröhnkite is highly exothermic (-51.51 ± 0.63 kJ mol -1 ). Structurally, kröhnkite offers a facile 2D pathway for Na+ ion migration resulting in 20 times higher total conductivity than saranchinaite at 60 °C. Both compounds exhibited a conversion redox mechanism for Li-ion storage with the first discharge capacity exceeding 650 mA h g -1 (at 2 mA g -1 vs. Li + /Li) upon discharge up to 0.05 V. Post-mortem analysis revealed that the presence of metallic Cu in the discharged state is responsible for high irreversibility during galvanostatic cycling. This study reaffirms the exploration of Cu-based polyanionic sulfates, which while having limited (de)insertion properties, can be harnessed for conversion-based electrode materials for batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Twofold symmetry of proximity-induced superconductivity in Bi 2 Te 3 / Bi 2 Sr 2 CaCu 2 O 8 + δ heterostructures revealed by scanning tunneling microscopy

We observe proximity-induced superconductivity in in situ prepared heterostructures constructed by topological insulator Bi 2 Te 3 thin films and high-temperature cuprate superconductors Bi 2 Sr 2 CaCu 2 O 8+δ . The superconducting gap maximum is about 7.6 meV on the surface of Bi 2 Te 3 thin films with a thickness of two quintuple layers, and the gap value decreases with an increase in the film thickness. Moreover, the quasiparticle interference data show clear evidence of a twofold symmetric superconducting gap with gap minima along one pair of the principal crystalline axes of Bi 2 Te 3 . This gap form is consistent with the Δ 4y notation of the topological superconductivity proposed in such systems. Our results provide fruitful information on the possible topological superconductivity induced by the proximity effect in high-temperature superconducting cuprates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Frustrated magnetism in the layered triangular lattice materials K 2 Co(SeO 3 ) 2 and Rb 2 Co(SeO 3 ) 2

A study of the layered triangular lattice materials K 2 Co(SeO 3 ) 2 and Rb 2 Co(SeO 3 ) 2 is reported here. These isostructural compounds crystallize in the trigonal space group R-3m (No. 166). The magnetic Co 2+ ions form a spin-1/2 triangular lattice and display strongly frustrated magnetism. We find no evidence in the susceptibility or heat capacity for in-plane ordering of the spins; rather the in-plane inverse susceptibility is typical of that seen for frustrated magnets. At around 10 K, a ferromagnetic component appears in the magnetic susceptibility perpendicular to the triangular planes. The heat capacity at low applied fields does not show sharp features, but in larger applied fields a sharp ferromagneticlike transition appears. Field- and direction-dependent magnetization measurements at 2 K indicate that both materials have a magnetic easy axis perpendicular to the triangular planes. The magnetic properties are sensitive to the field applied perpendicular to the triangular planes, which induces a metamagnetization transition at 0.75 T. Spin polarization develops along with the increasing out-of-plane field, resulting in a saturated ferromagnetic state at high fields. In contrast, the magnetic properties are resistant to the in-plane field. Our results suggest that these materials are embodiments of Ising spins on triangular lattices with easy-axis anisotropy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗