Search NASA⌕ Search

SEARCH · Search NASA

Results for “SECOND STAGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

Air Launch: Examining Performance Potential of Various Configurations and Growth Options

The Advanced Concepts Office at NASA's George C. Marshall Space Flight Center conducted a high-level analysis of various air launch vehicle configurations, objectively determining maximum launch vehicle payload while considering carrier aircraft capabilities and given dimensional constraints. With the renewed interest in aerial launch of low-earth orbit payloads, referenced by programs such as Stratolaunch and Spaceship2, there existed a need to qualify the boundaries of the trade space, identify performance envelopes, and understand advantages and limiting factors of designing for maximum payload capability. Using the NASA/DARPA Horizontal Launch Study (HLS) Point Design 2 (PD-2) as a point-of-departure configuration, two independent design actions were undertaken. Both configurations utilized a Boeing 747-400F as the carrier aircraft, LOX/RP-1 first stage and LOX/LH2 second stage. Each design was sized to meet dimensional and mass constraints while optimizing propellant loads and stage delta V (ΔV) splits. All concepts, when fully loaded, exceeded the allowable Gross Takeoff Weight (GTOW) of the aircraft platform. This excess mass was evaluated as propellant/fuel offload available for a potential in-flight refueling scenario. Results indicate many advantages such as large, relative payload delivery of approximately 47,000 lbm and significant mission flexibility, such as variable launch site inclination and launch window; however, in-flight cryogenic fluid transfer and carrier aircraft platform integration are substantial technical hurdles to the realization of such a system configuration.

Waters, Eric D.↗
NASA NTRS2013

Air Launch: Examining Performance Potential of Various Configurations and Growth Options

The Advanced Concepts Office at NASA's George C. Marshall Space Flight Center conducted a high-level analysis of various air launch vehicle configurations, objectively determining maximum launch vehicle payload while considering carrier aircraft capabilities and given dimensional constraints. With the renewed interest in aerial launch of low-earth orbit payloads, referenced by programs such as Stratolaunch and Spaceship2, there exists a need to qualify the boundaries of the trade space, identify performance envelopes, and understand advantages and limiting factors of designing for maximum payload capability. Using the NASA/DARPA Horizontal Launch Study (HLS) Point Design 2 (PD-2) as a pointof- departure configuration, two independent design actions were undertaken. Both designs utilized a Boeing 747-400F as the carrier aircraft, LOX/RP-1 first stage and LOX/LH2 second stage. Each design was sized to meet dimensional and mass constraints while optimizing propellant loads and stage delta V splits. All concepts, when fully loaded, exceeded the allowable Gross Takeoff Weight (GTOW) of the aircraft platform. This excess mass was evaluated as propellant/fuel offload available for a potential in-flight propellant loading scenario. Results indicate many advantages such as payload delivery of approximately 47,000 lbm and significant mission flexibility including variable launch site inclination and launch window. However, in-flight cryogenic fluid transfer and carrier aircraft platform integration are substantial technical hurdles to the realization of such a system configuration.

Waters, Eric D.↗
NASA NTRS2016

Free-Space Quantum Key Distribution with a High Generation Rate Potassium Titanyl Phosphate Waveguide Photon-Pair Source

A high generation rate photon-pair source using a dual element periodically-poled potassium titanyl phosphate (PP KTP) waveguide is described. The fully integrated photon-pair source consists of a 1064-nanometer pump diode laser, fiber-coupled to a dual element waveguide within which a pair of 1064-nanometer photons are up-converted to a single 532-nanometer photon in the first stage. In the second stage, the 532-nanometer photon is down-converted to an entangled photon-pair at 800 nanometer and 1600 nanometer which are fiber-coupled at the waveguide output. The photon-pair source features a high pair generation rate, a compact power-efficient package, and continuous wave (CW) or pulsed operation. This is a significant step towards the long term goal of developing sources for high-rate Quantum Key Distribution (QKD) to enable Earth-space secure communications. Characterization and test results are presented. Details and preliminary results of a laboratory free-space QKD experiment with the B92 protocol are also presented.

photons↗
NASA NTRS1980

On the origin of multiply-impulsive emission from solar flares

A set of solar hard X-ray bursts observed with the hard X-ray burst spectrometer on board the OSO-5 satellite was analyzed. The multiply-impulsive two stage events were selected on the basis of both morphological characteristics and association with appropriate phenomena at other wavelengths. Coincident radio, soft X-ray, H-alpha interplanetary particle, and magnetographic data were obtained from several observatories, to aid in developing a comprehensive picture of the physical processes underlying these complex bursts. Two classes of multiply impulsive bursts were identified: events whose components spikes apparently originate in one location, and events in which groups of spikes appear to come from separate regions which flare sequentially. The origin of multiplicity in the case of a single source region remains unidentified. Purely impulsive emissions show no sign of betatron acceleration, thus eliminating this mechanisn as a candidate for inducing multiply spiked structure. The majority of the two stage bursts, however, exhibited spectral behavior consistent with the betatron model, for the first few minutes of the second stage. Betatron acceleration thus has been identified as a common second stage phenomenon.

Karpen, J. T.↗
NASA NTRS1974

Performance of a highly loaded two stage axial-flow fan

A two-stage axial-flow fan with a tip speed of 1450 ft/sec (442 m/sec) and an overall pressure ratio of 2.8 was designed, built, and tested. At design speed and pressure ratio, the measured flow matched the design value of 184.2 lbm/sec (83.55kg/sec). The adiabatic efficiency at the design operating point was 85.7 percent. The stall margin at design speed was 10 percent. A first-bending-mode flutter of the second-stage rotor blades was encountered near stall at speeds between 77 and 93 percent of design, and also at high pressure ratios at speeds above 105 percent of design. A 5 deg closed reset of the first-stage stator eliminated second-stage flutter for all but a narrow speed range near 90 percent of design.

Ruggeri, R. S.↗
NASA NTRS1981

Development of the ARIES parachute system

The design and testing of a two-stage parachute system to recover a space telescope weighing up to 2000 pounds is described. The system consists of a 15-ft dia ribbon parachute reefed to 50% for 10 seconds and a 73-ft dia paraform or cross second stage reefed to 10% for 10 seconds. The results of eight drop tests and one operational rocket launched flight and recovery are presented. A successful operational recovery of a 1600-lb NASA space telescope was conducted. The payload was launched by a second stage Minuteman rocket to an altitude of about 300 miles above sea level.

Pepper, W. B.↗
NASA NTRS2005

Galium Electromagnetic (GEM) Thruster Concept and Design

We describe the design of a new type of two-stage pulsed electromagnetic accelerator, the gallium electromagnetic (GEM) thruster. A schematic illustration of the GEM thruster concept is given. In this concept, liquid gallium propellant is pumped into the first stage through a porous metal electrode using an electromagnetic pump. At a designated time, a pulsed discharge (approx. 10-50 J) is initiated in the first stage, ablating the liquid gallium from the porous electrode surface and ejecting a dense thermal gallium plasma into the second state. The presence of the gallium plasma in the second stage serves to trigger the high-energy (approx. 500 J), second-stage pulse which provides the primary electromagnetic (j x B) acceleration.

Polzin, Kurt A.↗
NASA NTRS1957

Investigation of two-stage air-cooled turbine suitable for flight at Mach number of 2.5 II : blade design

A blade design study is presented for a two-stage air-cooled turbine suitable for flight at a Mach number of 2.5 for which velocity diagrams have been previously obtained. The detailed procedure used in the design of the blades is given. In addition, the design blade shapes, surface velocity distributions, inner and outer wall contours, and other design data are presented. Of all the blade rows, the first-stage rotor has the highest solidity, with a value of 2.289 at the mean section. The second-stage stator also had a high mean-section solidity of 1.927, mainly because of its high inlet whirl. The second-stage rotor has the highest value of the suction-surface diffusion parameter, with a value of 0.151. All other blade rows have values for this parameter under 0.100.

Miser, James W↗
NASA NTRS1989

Orbital debris from upper-stage breakup

The present conference on the effects of launch vehicle upper-stage breakup on the orbital debris scenario discusses an analysis of the SPOT 1 Ariane third stage, the explosive fragmentation of orbiting propellant tanks, albedo estimates for debris, Ariane-related debris in deep-space orbit, and the relationship of hypervelocity impacts to upper-stage breakups. Also discussed are the prospects for and the economics of the future removal of orbital debris, collision probabilities in GEO, current operational practices for Delta second stage breakup prevention, breakup-precluding modifications to the Ariane third stage, and the safing of the H-1 second stage after spacecraft separation.

Loftus, Joseph P., Jr.↗
NASA NTRS2014

Planned Flight of the Terrestrial HIAD Orbital Reentry (THOR)

The Terrestrial HIAD Orbital Reentry (THOR) is planned for flight in 2016 as a secondary payload on an Orbital Sciences commercial resupply mission to the International Space Station. THOR will launch with its Hypersonic Inflatable Aerodynamic Decelerator (HIAD) stowed as a small cylinder between the second stage motor and the launch vehicle fairing. Once the Cygnus cargo vehicle has separated from the second stage, THOR will likewise separate, autonomously re-orient itself, perform a deorbit burn, then inflate the HIAD to a 3.5m diameter cone before atmospheric interface. THOR is a follow-on mission to the IRVE-3 flight test of 2012. The high energy of orbital reentry will allow THOR to demonstrate the performance of its improved, second-generation inflatable structure and flexible TPS materials, in a more energetic entry environment than previous suborbital test flights.This paper discusses the sequence of events planned to occur as part of the THOR mission. Specific topics will include the THOR mission concept, reentry vehicle design for the expected flight environment, the on-board sensors that will allow quantification of vehicle performance, and how we intend to retrieve the flight data from a reentry vehicle splashing down in international waters.

Dillman, Robert↗
NASA NTRS1963

Apollo-Lunar Orbital Rendezvous Technique

The film shows artists rendition of the spacecrafts, boosters, and flight of the Apollo lunar missions. The Apollo spacecraft will consist of three modules: the manned Command Module; the Service Module, which contains propulsion systems; and the Lunar Excursion Module (LEM) to carry astronauts to the moon and back to the Command and Service Modules. The spacecraft will be launched via a three-stage Saturn booster. The first stage will provide 7.5 million pounds of thrust from five F-1 engines for liftoff and initial powered flight. The second stage will develop 1 million pounds of thrust from five J-2 engines to boost the spacecraft almost into Earth orbit. Immediately after ignition of the second stage, the Launch Escape System will be jettisoned. A single J-2 engine in the S4B stage will provide 200,000 pounds of thrust to place the spacecraft in an earth parking orbit. It also will be used to propel the spacecraft into a translunar trajectory, then it will separate from the Apollo Modules. Onboard propulsion systems will be used to insert the spacecraft into lunar orbit. Two astronauts will enter the LEM, which will separate from the command and service modules. The LEM will go into elliptical orbit and prepare for landing. The LEM will lift off of the Moon's surface to return to the Command and Service Modules, and most likely be left in lunar orbit. After leaving the Moon's orbit, and shortly before entering Earth's orbit, the Service Module will be ejected. The Command Module will be oriented for reentry into the Earth's atmosphere. A drogue parachute will deploy at approximately 50,000 feet, followed by the main parachute system for touchdown.

Source record↗
NASA NTRS1991

Advanced techniques and technology for efficient data storage, access, and transfer

Advanced techniques for efficiently representing most forms of data are being implemented in practical hardware and software form through the joint efforts of three NASA centers. These techniques adapt to local statistical variations to continually provide near optimum code efficiency when representing data without error. Demonstrated in several earlier space applications, these techniques are the basis of initial NASA data compression standards specifications. Since the techniques clearly apply to most NASA science data, NASA invested in the development of both hardware and software implementations for general use. This investment includes high-speed single-chip very large scale integration (VLSI) coding and decoding modules as well as machine-transferrable software routines. The hardware chips were tested in the laboratory at data rates as high as 700 Mbits/s. A coding module's definition includes a predictive preprocessing stage and a powerful adaptive coding stage. The function of the preprocessor is to optimally process incoming data into a standard form data source that the second stage can handle.The built-in preprocessor of the VLSI coder chips is ideal for high-speed sampled data applications such as imaging and high-quality audio, but additionally, the second stage adaptive coder can be used separately with any source that can be externally preprocessed into the 'standard form'. This generic functionality assures that the applicability of these techniques and their recent high-speed implementations should be equally broad outside of NASA.

Rice, Robert F.↗
NASA NTRS2002

Technology Assessments within NASA's Integrated Technology Assessment Center

NASA's Advanced Space Transportation Program (ASTP) founded the Integrated Technology Assessment Center (ITAC) to provide a comprehensive, systematic approach to identify long-term technology needs, to quantify payoffs for technology investments, and to assess the progress of ASTP-sponsored technology programs in the hypersonics/Earth-to-orbit area. To accomplish these goals, the ITAC has assembled an experienced team representing a broad sector of the aerospace community and developed a systematic assessment process complete with supporting tools. In the ITAC approach, concepts for transportation systems are first selected based on relevance to the ASTP. Models of these concepts are then developed and data on advanced technologies are collected. Projections of key technology characteristics with respect to the specific concepts of interest are made. Both the models and technology projections are then fed into the ITAC's probabilistic systems analysis framework. The probabilistic outputs are weighed against metrics of interest to ASTP and a multivariate decision making process is used to provide inputs for technology prioritization within the ASTP. At present, the ITAC program is working to evaluate a variety of technologies for three two-stage hypersonic vehicle concepts. Concepts include an all rocket, vertical take off-horizontal landing (VTHL) system, a horizontal takeoff-horizontal landing (HTHL) RBCC-propelled first stage/all rocket second stage system, and an HTHL turbine-based first stage/all rocket second stage system. This paper will provide a status update of the ITAC program including current results and plans.

Taylor, J. L.↗
NASA NTRS2002

Technology Assessments within NASA's Integrated Technology Assessment Center

NASA's Advanced Space Transportation Program (ASTP) founded the Integrated Technology Assessment Center (ITAC) to provide a comprehensive, systematic approach to identify long-term technology needs, to quantify payoffs for technology investments, and to assess the progress of ASTP-sponsored technology programs in the hypersonics/Earth-to-orbit area. To accomplish these goals, the ITAC has assembled an experienced team representing a broad sector of the aerospace community and developed a systematic assessment process complete with supporting tools. In the ITAC approach, concepts for transportation systems are first selected based on relevance to the ASTP. Models of these concepts are then developed and data on advanced technologies are collected. Projections of key technology characteristics with respect to the specific concepts of interest are made. Both the models and technology projections are then fed into the ITAC's probabilistic systems analysis framework. The probabilistic outputs are weighed against metrics of interest to ASTP and a multivariate decision making process is used to provide inputs for technology prioritization within the ASTP. At present, the ITAC program is working to evaluate a variety of technologies for three two-stage hypersonic vehicle concepts. Concepts include an all rocket, vertical take off-horizontal landing (VTHL) system, a horizontal take-off-horizontal landing (HTHL) RBCC-propelled first stage/all rocket second stage system, and an HTHL turbine-based first stage/all rocket second stage system. This paper will provide a status update of the ITAC program including current results and plans.

Taylor, J. L.↗
NASA NTRS2008

NASA Experience with Pogo in Human Spaceflight Vehicles

An overview of more than 45 years of NASA human spaceflight experience is presented with respect to the thrust axis vibration response of liquid fueled rockets known as pogo. A coupled structure and propulsion system instability, pogo can result in the impairment of the astronaut crew, an unplanned engine shutdown, loss of mission, or structural failure. The NASA history begins with the Gemini Program and adaptation of the USAF Titan II ballistic missile as a spacecraft launch vehicle. It continues with the pogo experienced on several Apollo-Saturn flights in both the first and second stages of flight. The defining moment for NASA s subsequent treatment of pogo occurred with the near failure of the second stage on the ascent of the Apollo 13 mission. Since that time NASA has had a strict "no pogo" philosophy that was applied to the development of the Space Shuttle. The "no pogo" philosophy lead to the first vehicle designed to be pogo-free from the beginning and the first development of an engine with an integral pogo suppression system. Now, more than 30 years later, NASA is developing two new launch vehicles, the Ares I crew launch vehicle propelling the Orion crew excursion vehicle, and the Ares V cargo launch vehicle. A new generation of engineers must again exercise NASA s system engineering method for pogo mitigation during design, development and verification.

Larsen, Curtis E.↗
NASA NTRS1982

The role of betatron acceleration in complex solar bursts

An explanation in terms of betatron acceleration is attempted for two prominent features of solar hard X-ray emission profiles: the multiplicity manifested by complex impulsive events, and the intense, long-enduring radiation typical of two-stage or extended events. The model employs the basic characteristics of a simple magnetic trap. The observed spectral evolution can be represented effectively by a set of characteristics derived in a thick-target representation. The application to multiple-spike and two-stage bursts is studied, and it is found that impulsive events show no signs of betatron acceleration. However, during the first few minutes of the second stage, the nonimpulsive X-ray emission appears to be consistent with the predictions of the model. Several intense extended events are analyzed and the betatron process is established as a viable candidate for producing the early second-stage emission.

Karpen, J. T.↗
NASA NTRS1987

SSME single crystal turbine blade dynamics

A study was performed to determine the dynamic characteristics of the Space Shuttle main engine high pressure fuel turbopump (HPFTP) blades made of single crystal (SC) material. The first and second stage drive turbine blades of HPFTP were examined. The nonrotating natural frequencies were determined experimentally and analytically. The experimental results of the SC second stage blade were used to verify the analytical procedures. The analytical study examined the SC first stage blade natural frequencies with respect to crystal orientation at typical operating conditions. The SC blade dynamic response was predicted to be less than the directionally solidified blade. Crystal axis orientation optimization indicated the third mode interference will exist in any SC orientation.

Moss, Larry A.↗
NASA NTRS1988

SSME single-crystal turbine blade dynamics

A study was performrd to determine the dynamic characteristics of the Space Shuttle Main Engine high pressure fuel turbopump (HPFTP) blades made of single crystal (SC) material. The first and second stage drive turbine blades of HPFTP were examined. The nonrotating natural frequencies were determined experimentally and analytically. The experimental results of the SC second stage blade were used to verify the analytical procedures. The study examined the SC first stage blade natural frequencies with respect to crystal orientation at typical operating conditions. The SC blade dynamic response was predicted to be less than the directionally solidified base. Crystal axis orientation optimization indicated that the third mode interference will exist in any SC orientation.

Moss, Larry A.↗