Search NASA⌕ Search

SEARCH · Search NASA

Results for “SHEAR LAG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

An enhanced integrated aerodynamic load/dynamic optimization procedure for helicopter rotor blades

An enhanced integrated aerodynamic load/dynamic optimization procedure is developed to minimize vibratory root shears and moments. The optimization is formulated with 4/rev vertical and 3/rev inplane shears at the blade root as objective functions and constraints, and 4/rev lagging moment. Constraints are also imposed on blade natural frequencies, weight, autorotational inertia, centrifugal stress, and rotor thrust. The 'Global Criteria Approach' is used for formulating the multi-objective optimization. Design variables include spanwise distributions of bending stiffnesses, torsional stiffness, nonstructural mass, chord, radius of gyration, and blade taper ratio. The program CAMRAD is coupled with an optimizer, which consists of the program CONMIN and an approximate analysis, to obtain optimum designs. The optimization procedure is applied to an advanced rotor as a reference design. Optimum blade designs, obtained with and without a constraint on the rotor thrust, are presented and are compared to the reference blade. Substantial reductions are obtained in the vibratory root forces and moments. As a byproduct, improvements are also found in some performance parameters, such as total power required, which were not considered during optimization.

Chattopadhyay, Aditi↗
NASA NTRS1990

An enhanced integrated aerodynamic load/dynamic approach to optimum rotor blade design

An enhanced integrated aerodynamic load/dynamic optimization procedure is developed to minimize vibratory root shears and moments. The optimization is formulated with 4/rev vertical and 3/rev inplane shears at the blade root as objective functions and constraints, and 4/rev lagging moment. Constraints are also imposed on blade natural frequencies, weight, autorotational inertia, contrifugal stress, and rotor thrust. The Global Criteria Approach is used for formulating the multi-objective optimization. Design variables include spanwise distributions of bending stiffnesses, torsional stiffness, nonstructural mass, chord, radius of gyration, and blade taper ratio. The program CAMRAD is coupled with an optimizer, which consists of the program CONMIN and an approximate analysis, to obtain optimum designs. The optimization procedure is applied to an advanced rotor as a reference design. Optimum blade designs, obtained with and without a constraint on the rotor thrust, are presented and are compared to the reference blade. Substantial reductions are obtained in the vibratory root forces and moments. As a byproduct, improvements are also found in some performance parameters, such as total power required, which were not considered during optimization.

Chattopadhyay, Aditi↗
NASA NTRS1994

Determining F-factor using ground-based Doppler radar: Validation and results

Using a two-dimensional linear least-squares method applied to Doppler radar data, we test the viability of determining F-factor remotely. The ultimate application of such an algorithm will be supplying real-time F-factor maps, derived from ground-based Doppler radars to air traffic control personnel and pilots. Data from NASA deployments to the MIT/Lincoln Lab TDWR testbed radar in Orlando in 1991 and 1992 along with NASA deployments to the NCAR TDWR testbed radar in Denver are examined. Preliminary analyses show that the two-dimensional method correlates reasonably well with in situ measurements. Several effects, independent of the method used, act to reduce the correlation to less than one. These include time differences between radar and aircraft data, vertical misalignment between the aircraft and the radar beam, different spatial resolution scales between aircraft and radar data, inhomogeneous radar beam filling, noise in radar data that eludes filtering, and phase lag between time and space due to low pass filtering of the aircraft data. In the final assessment, it appears that a shear-based F-factor algorithm is preferable to the currently implemented TDWR algorithms which lack any local shear estimates.

Elmore, K. L.↗
NASA NTRS1986

The structure, energetics and evolution of the dominant frequency-dependent three-dimensional atmospheric modes

The three-dimensional structure of the dominant modes of wintertime variability are examined, and the mode structures are determined by an EOF analysis of the coupled vertical mean and shear streamfunction fields for a wide range of time-scale classes. The time mean energy conversions are determined from a two-layer quasigeostrophic model. Lag-cross correlations between the dominant low-frequency modes tend to be small and/or symmetric about zero, the high frequency modes are found to show highly asymmetric sinusoidal cross correlation functions similar to traveling waves, and some intermediate and short-time scale modes exhibit correlations indicating an association with the decaying phases of blocking in the Pacific. It is suggested that the mean flow barotropic (baroclinic) instabilities are an important source of variance for some of the lowest (highest) fluctuations considered.

Schubert, S. D.↗
NASA NTRS1983

Application of unsteady laminar triple-deck theory to viscous-inviscid interactions from an oscillating flap in supersonic and subsonic flow

Unsteady triple-deck theory is applied to analyze the local viscous-inviscid interaction of an idealized oscillating flap with a laminar boundary layer in either supersonic or subsonic external flow. For small flap amplitudes and small-to-moderate nondimensional frequencies, linearized analytical solutions by means of Fourier transformation are given for the pressure and shear distributions ahead of and behind the flap hinge. In the supersonic case, the predicted unsteady viscous effects reduce the pressure amplitude and spread it out upstream while causing it to lag the quasi-steady inviscid prediction (flap motion); this also results in an unsteady delay of incipient separation at the hinge to a higher flap amplitude. In contrast, the lowered unsteady viscous pressure distribution in purely subsonic flow slightly leads the flap motion, resulting in incipient separation at a smaller flap amplitude than the quasi-steady value. These trends are shown to be in qualitative agreement with available experimental data.

Inger, G. R.↗
NASA NTRS1991

Aerodynamic calculations related to tethered sub-satellite experiments

The results are presented of four aerodynamic studies that were in support of a broader, preliminary inquiry concerning the potential use of downward-deployed tethered sub-satellites for in-flight aerothermodynamic research. There are a multitude of questions regarding the general tethered satellite concept and the present report addresses only a few of these. A method for estimating drag and local surface pressure and shear on orbiting or re-entereing bodies is described, and examples based on the planned TSS-2 (Tethered Satellite System) are given. The problem of pressure measurement are explored, taking into account thermal transpiration, lag time, and the disturbed flow field created by the satellite body. The performance of an aerodynamic stabilizer, a ring-tail design, is calculated and its influence on satellite motion is illustrated. A method for optimizing future satellite shapes for desired aerodynamic properties is transitional rarefied flow with given geometric constraints is proposed and examples are shown.

Potter, J. Leith↗
NASA NTRS1996

Fluid flow stimulates rapid and continuous release of nitric oxide in osteoblasts

Interstitial fluid flow may mediate skeletal remodeling in response to mechanical loading. Because nitric oxide (NO) has been shown to be an osteoblast mitogen and inhibitor of osteoclastic resorption, we investigated and characterized the role of fluid shear on the release of NO in osteoblasts. Rat calvarial cells in a stationary culture produced undetectable levels of NO. Fluid shear stress (6 dyn/cm2) rapidly increased NO release rate to 9.8 nmol.h-1.mg protein-1 and sustained this production for 12 h of exposure to flow. Cytokine treatment also induced NO synthesis after a 12-h lag phase of zero production, followed by a production rate of 0.6 nmol.h-1.mg protein-1. Flow-induced NO production was blocked by the NO synthase (NOS) inhibitor NG-amino-L-arginine, but not by dexamethasone, which suggests that the flow stimulated a constitutive NOS isoform. This is the first time that a functional constitutively present NOS isoform has been identified in osteoblasts. Moreover, fluid flow represents the most potent stimulus of NO release in osteoblasts reported to date. Fluid flow-induced NO production may therefore play a primary role in bone maintenance and remodeling.

NASA Discipline Cell Biology↗
NASA NTRS1988

Aeroelasticity and structural optimization of rotor blades with swept tips

In the present FEM scheme for the aeroelastic modeling of a swept-tip rotor blade, the swept tip of the blade is assumed to undergo moderate deflections in the flap, lag, and torsion degrees-of-freedom. The nonlinear PDEs of motion are discretized by a Galerkin-type FEM. This aeroelastic stability-and-response computational capability is combined with a structural optimization analysis to minimize the n/rev vertical hub shears in forward flight, subject to aeroelastic stability and frequency placement constraints. Tip sweep is used as a design variable to reduce vibration levels in forward flight.

Friedmann, P. P.↗
NASA NTRS1992

A new aeroelastic model for composite rotor blades with straight and swept tips

An analytical model for predicting the aeroelastic behavior of composite rotor blades with straight and swept tips is presented. The blade is modeled by beam type finite elements along the elastic axis. A single finite element is used to model the swept tip. The nonlinear equations of motion for the finite element model are derived using Hamilton's principle and based on a moderate deflection theory and accounts for: arbitrary cross-sectional shape, pretwist, generally anisotropic material behavior, transverse shears and out-of-plane warping. Numerical results illustrating the effects of tip sweep, anhedral and composite ply orientation on blade aeroelastic behavior are presented. Tip sweep can induce aeroelastic instability by flap-twist coupling. Tip anhedral causes lag-torsion and flap-axial couplings, however, its effects on blade stability is less pronounced than the effect due to sweep. Composite ply orientation has a substantial effect on blade stability.

Yuan, Kuo-An↗
NASA NTRS1989

A study of fundamental issues in higher harmonic control using aeroelastic simulation

This paper describes a higher harmonic control (HHC) study of a four-bladed helicopter rotor using a coupled flap-lag-torsional aeroelastic stability and response analysis which incorporates finite-state, time-domain aerodyamics. The rotor trim condition is determined using a simplified flap-lag-torsional aeroelastic analysis. Deterministic and cautious controllers based on local and global HHC models are implemented to reduce 4/rev hub loads on roughly equivalent articulate and hingeless rotors. Results obtained for the case when the objective function requires reduction of hub shears alone are compared with results obtained when hub shears and moments are reduced simultaneously. The effects of HHC on blade aeroelastic stability are also considered. Finally, the power requirements for implementing HHC on a hingeless rotor are compared with those obtained for an articulated rotor. It is concluded that hingeless rotors require considerably more power and higher control angles than comparable articulated rotors.

Robinson, Lawson H.↗
NASA NTRS1988

Aeroelastic characteristics of the AH-64 bearingless tail rotor

The results of a wind tunnel test program to determine the performance loads and dynamic characteristics of the Composite Flexbeam Tail Rotor (CFTR) for the AH-64 Advanced Attack Helicopter are reported. The CFTR uses an elastomeric shear attachment of the flexbeam to the hub to provide soft-inplane S-mode and stiff-inplane C-mode configuration. The properties of the elastomer were selected for proper frequency placement and scale damping of the inplane S-mode. Kinematic pitch-lag coupling was introduced to provide the first cyclic inplane C-mode damping at high collective pitch. The CFTR was tested in a wind tunnel over the full slideslip envelop of the AH-64. It is found that the rotor was aeroelastically stable throughout the complete collective pitch range and up to rotor speeds of 1403 rpm. The dynamic characteristics of the rotor were found to be satisfactory at all pitch angles and rotor speeds of the tunnel tests. The design characteristics of the rotor which permit the high performance characteristics are discussed. Several schematic drawings and photographs of the rotor are provided.

Banerjee, D.↗
NASA NTRS1984

Optimum design of rotor blades for vibration reduction in forward flight

Modern structural optimization techniques are applied to vibration reduction of helicopter rotor blades in forward flight. The objective function minimized consists of the oscillatory vertical hub shears or the hub rolling moments at one particular advance ratio. The behavior constraints are the frequency placements of the blade and the requirement that aeroelastic stability margins, in hover, remain unaffected by the optimization process. The aeroelastic stability and response analysis is based on a fully coupled flap-lag-torsional analysis of the blade. Numerical results are presented for some typical soft-in-plane hingeless rotor configurations indicating a 15-40 percent reduction in vibration levels, as well as a blade which is 20 percent lighter than the initial design. These results imply that structural optimization techniques can yield substantial practical benefits in the design process of rotor systems.

Friedmann, P. P.↗
NASA NTRS1992

Aeroelastic behavior of composite rotor blades with swept tips

This paper presents an analytical study of the aeroelastic behavior of composite rotor blades with straight and swept tips. The blade is modeled by beam type finite elements. A single finite element is used to model the swept tip. The nonlinear equations of motion for the finite element model are derived using Hamilton's principle and based on a moderate deflection theory and accounts for: arbitrary cross-sectional shape, pretwist, generally anisotropic material behavior, transverse shears and out-of-plane warping. Numerical results illustrating the effects of tip sweep, anhedral and composite ply orientation on blade aeroelastic behavior are presented. It is shown that composite ply orientation has a substantial effect on blade stability. At low thrust conditions, certain ply orientations can cause instability in the lag mode. The flap-torsion coupling associated with tip sweep can also induce aeroelastic instability in the blade. This instability can be removed by appropriate ply orientation in the composite construction.

Yuan, Kuo-An↗
NASA NTRS1992

Aeroelastic modeling of composite rotor blades with straight and swept tips

This paper presents an analytical study of the aeroelastic behavior of composite rotor blades with straight and swept tips. The blade is modeled by beam type finite elements. A single finite element is used to model the swept tip. The nonlinear equations of motion for the FEM are derived using Hamilton's principle and based on a moderate deflection theory and accounts for: arbitrary cross-sectional shape, pretwist, generally anisotropic material behavior, transverse shears and out-of-plane warping. Numerical results illustrating the effects of tip sweep, anhedral and composite ply orientation on blade aeroelastic behavior are presented. It is shown that composite ply orientation has a substantial effect on blade stability. At low thrust conditions, certain ply orientations can cause instability in the lag mode. The flap-torsion coupling associated with tip sweep can also induce aeroelastic instability in the blade. This instability can be removed by appropriate ply orientation in the composite construction. These results illustrate the inherent potential for aeroelastic tailoring present in composite rotor blades with swept tips, which still remains to be exploited in the design process.

Yuan, Kuo-An↗
NASA NTRS1992

Vibration reduction in helicopter rotors using an active control surface located on the blade

A feasibility study of vibration reduction in a four-bladed helicopter rotor using individual blade control (IBC), which is implemented by an individually controlled aerodynamic surface located on each blade, is presented. For this exploratory study, a simple offset-hinged spring restrained model of the blade is used with fully coupled flap-lag-torsional dynamics for each blade. Deterministic controllers based on local and global system models are implemented to reduce 4/rev hub loads using both an actively controlled aerodynamic surface on each blade as well as conventional IBC, where the complete blade undergoes cyclic pitch change. The effectiveness of the two approaches for simultaneous reduction of the 4/rev hub shears and hub moments is compared. Conventional IBC requires considerably more power to achieve approximately the same level of vibration reduction as that obtained by implementing IBC using an active control surface located on the outboard segment of the blade. The effect of blade torsional flexibility on the vibration reduction effectiveness of the actively controlled surface was also considered and it was found that this parameter has a very substantial influence.

Millott, T. A.↗
NASA NTRS1994

Aeroelastic simulation of higher harmonic control

This report describes the development of an aeroelastic analysis of a helicopter rotor and its application to the simulation of helicopter vibration reduction through higher harmonic control (HHC). An improved finite-state, time-domain model of unsteady aerodynamics is developed to capture high frequency aerodynamic effects. An improved trim procedure is implemented which accounts for flap, lead-lag, and torsional deformations of the blade. The effect of unsteady aerodynamics is studied and it is found that its impact on blade aeroelastic stability and low frequency response is small, but it has a significant influence on rotor hub vibrations. Several different HHC algorithms are implemented on a hingeless rotor and their effectiveness in reducing hub vibratory shears is compared. All the controllers are found to be quite effective, but very differing HHC inputs are required depending on the aerodynamic model used. Effects of HHC on rotor stability and power requirements are found to be quite small. Simulations of roughly equivalent articulated and hingeless rotors are carried out, and it is found that hingeless rotors can require considerably larger HHC inputs to reduce vibratory shears. This implies that the practical implementation of HHC on hingeless rotors might be considerably more difficult than on articulated rotors.

Robinson, Lawson H.↗
NASA NTRS1999

Total Lightning Activity Associated with Tornadic Storms

Prior studies have examined the association of lightning activity with the occurrence of severe weather. Severe storms often have high flash rates (in excess of one flash per second) and are dominated by intracloud lightning activity. Most recently, we have identified a rapid change (referred to as a "jump") in total flash rate which precedes the occurrence of severe weather by ten or more minutes. This relationship is associated with updraft intensification. In this paper we examine whether there exist unique characteristics of the total lightning and the lightning jumps associated with tornadoes in Florida, and explain how they might relate to the interaction of mesocyclonic shear, the rear flank downdraft and outflow boundaries that can lead to tornadogenesis. In several cases, evidence for diminishment of midlevel rotation and the descent of angular momentum from aloft is present prior to the appearance of the surface tornado. The relatively long lead time between the lighting jump and the occurrence of the tornado is attributed to the time lag between updraft invigoration and the boundary layer spin up of vorticity.

Goodman, Steven J.↗
NASA NTRS2012

Life Cycle of Midlatitude Deep Convective Systems in a Lagrangian Framework

Deep Convective Systems (DCSs) consist of intense convective cores (CC), large stratiform rain (SR) regions, and extensive non-precipitating anvil clouds (AC). This study focuses on the evolution of these three components and the factors that affect convective AC production. An automated satellite tracking method is used in conjunction with a recently developed multi-sensor hybrid classification to analyze the evolution of DCS structure in a Lagrangian framework over the central United States. Composite analysis from 4221 tracked DCSs during two warm seasons (May-August, 2010-2011) shows that maximum system size correlates with lifetime, and longer-lived DCSs have more extensive SR and AC. Maximum SR and AC area lag behind peak convective intensity and the lag increases linearly from approximately 1-hour for short-lived systems to more than 3-hours for long-lived ones. The increased lag, which depends on the convective environment, suggests that changes in the overall diabatic heating structure associated with the transition from CC to SR and AC could prolong the system lifetime by sustaining stratiform cloud development. Longer-lasting systems are associated with up to 60% higher mid-tropospheric relative humidity and up to 40% stronger middle to upper tropospheric wind shear. Regression analysis shows that the areal coverage of thick AC is strongly correlated with the size of CC, updraft strength, and SR area. Ambient upper tropospheric wind speed and wind shear also play an important role for convective AC production where for systems with large AC (radius greater than 120-km) they are 24% and 20% higher, respectively, than those with small AC (radius=20 km).

Feng, Zhe↗