Search NASA⌕ Search

SEARCH · Search NASA

Results for “SLICING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Single-field slice-imaging with a movable repeller: Photodissociation of N{sub 2}O from a hot nozzle

We present a new photo-fragment imaging spectrometer, which employs a movable repeller in a single field imaging geometry. This innovation offers two principal advantages. First, the optimal fields for velocity mapping can easily be achieved even using a large molecular beam diameter (5 mm); the velocity resolution (better than 1%) is sufficient to easily resolve photo-electron recoil in (2 + 1) resonant enhanced multiphoton ionization of N{sub 2} photoproducts from N{sub 2}O or from molecular beam cooled N{sub 2}. Second, rapid changes between spatial imaging, velocity mapping, and slice imaging are straightforward. We demonstrate this technique's utility in a re-investigation of the photodissociation of N{sub 2}O. Using a hot nozzle, we observe slice images that strongly depend on nozzle temperature. Our data indicate that in our hot nozzle expansion, only pure bending vibrations – (0, v{sub 2}, 0) – are populated, as vibrational excitation in pure stretching or bend-stretch combination modes are quenched via collisional near-resonant V-V energy transfer to the nearly degenerate bending states. We derive vibrationally state resolved absolute absorption cross-sections for (0, v{sub 2} ≤ 7, 0). These results agree well with previous work at lower values of v{sub 2}, both experimental and theoretical. The dissociation energy of N{sub 2}O with respect to the O({sup 1}D) + N{sub 2} + Σ{sup +}{sub g} asymptote was determined to be 3.65 ± 0.02 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Compensating slice emittance growth in high brightness photoinjectors using sacrificial charge

Achieving maximum electron beam brightness in photoinjectors requires detailed control of the 3D bunch shape and precise tuning of the beam focusing. Even in state-of-the-art designs, slice emittance growth due to nonlinear space charge forces and partial nonlaminarity often remains non-negligible. In this work, we introduce a new means to linearize the transverse slice phase space: a sacrificial portion of the bunch’s own charge distribution, formed into a wavebroken shock front by highly nonlinear space charge forces within the gun, whose downstream purpose is to dynamically linearize the desired bunch core. We show that linearization of an appropriately prepared bunch can be achieved via strongly nonlaminar focusing of the sacrificial shock front, while the inner core focuses laminarly. This leads to a natural spatial separation of the two distributions: a dense core surrounded by a diffuse halo of sacrificial charge that can be collimated. Multiobjective genetic algorithm optimizations of the ultracompact x-ray free electron laser injector employ this concept, and we interpret it with an analytic model that agrees well with the simulations. In simulation, we demonstrate a final bunch charge of 100 pC, peak current ∼ 30 A, and a sacrificial charge of 150 pC (250 pC total emitted from cathode) with normalized emittance growth of < 20 nm rad due to space charge. This implies a maximum achievable brightness approximately an order of magnitude greater than existing free electron laser injector designs. Published by the American Physical Society 2024

43 PARTICLE ACCELERATORS↗

Determination of the α -decay half-life of Po 210 based on film and slice bismuth samples at room temperature

For this research, the α decay rate of 210 Po was measured in a film sample ( 210 Po@Bi 2 O 3 ) and a slice sample ( 210 Po@Bi metal), respectively. The former was used as a reference sample. The half-lives of 210 Po@Bi 2 O 3 and 210 Po@Bi metal environments were observed to be (138.40 ± 0.21 d) and (138.87 ± 0.87 d) at room temperature, respectively. It was found that the half-life of 210 Po is consistent with international recommendations within the uncertainty limits, and we did not find any deviation of the α decay rate of 210 Po between film sample ( 210 Po@Bi 2 O 3 ) and slice sample ( 210 Po@Bi metal).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Black hole initial data on hyperboloidal slices

We generalize Bowen-York black hole initial data to hyperboloidal constant mean curvature slices which extend to future null infinity. We solve this initial value problem numerically for several cases, including unequal mass binary black holes with spins and boosts. The singularity at null infinity in the Hamiltonian constraint associated with a constant mean curvature hypersurface does not pose any particular difficulties. The inner boundaries of our slices are minimal surfaces. Trumpet configurations are explored both analytically and numerically.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Warping, extra dimensions, and a slice of AdS{sub d}

Inspired by the Randall-Sundrum framework we consider a number of phenomenologically relevant model-building questions on a slice of compactified AdS{sub d} for d>5. Such spaces are interesting as they enable one to realize the weak scale via warping. We perform the Kaluza-Klein (KK) reduction for gravitons and bulk vectors in these spaces, and for the case of AdS{sub 6} consider the KK spectrum of gauge scalars. We further obtain the KK towers for bulk fermions on a slice of AdS{sub 7} and AdS{sub 9} and show that the Randall-Sundrum approach to flavor generalizes to these spaces with the localization of chiral zero-mode fermions controlled by their bulk Dirac mass parameters. However, for the phenomenologically interesting case where the transverse radius is R{sup -1{approx}}TeV, we show that bulk standard model fields are not viable due to a resulting volume suppression of the gauge-coupling constants. A similar suppression occurs for the case of UV localization. Thus it seems that the standard model fields should be confined to the infrared brane in such spaces. Sterile fields and extended gauge sectors may propagate in the bulk, with the gauge-coupling volume suppression experienced by the latter motivating a weak coupling to standard model fields. We also discuss some issues regarding the effective 4D theory description in these spaces.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

5G Service Value Chain and Network Slicing Framework using Ecosystem Modeling, Agile Delivery, and User-Story Automation

The 5G technology allows telecommunication operators to provide services beyond data broadband for consumers, employing tailored use-cases for enterprise and vertical markets. As a result, there is an increasing need for a collaborative service development through a de-centralized value-chain, along with new business models and shorter time-to-market. In this paper, a novel, use-case driven framework for a modular 5G service design and delivery is proposed. The framework implements agile and as-a-service principles to provide 5G use-case customers access not only to service usage, but also to design and operation. The framework integrates with the 3rd Generation Partnership Project (3GPP) specifications by mapping network-slicing procedures to the designed ecosystem lifecycle operations. The framework allows for any-technology deployment, utilizing the available foundations for domain-specific automation. A structured collaboration between a 5G operator and a use-case user allows for the customization and improvement of the targeted use-case, where 5G network assets are updated with customer’s vertical components through programmable user-stories. Laboratory testing of a 5G network-slicing for a private-telephony and merchandise-tracking service is performed to validate the effectiveness of the proposed approach for real-world applications.

97 MATHEMATICS AND COMPUTING↗

Network Slicing for Federated Learning in Operational Technology Environment

Industrial Control Systems (ICS) and Supervisory Control and Data Acquisition (SCADA) environments are essential to modern infrastructure, facing challenges in ensuring low-latency, high-throughput communication while mitigating cyber threats. This paper presents a framework integrating Federated Learning (FL) and network slicing with Quality of Service (QoS) to enable real-time monitoring without disrupting OT operations. Leveraging digital twin technology and Network Function Virtualization (NFV), the architecture supports predictive analytics and Industry 4.0 requirements. FL facilitates decentralized model training, preserving data privacy and scalability, though it introduces potential throughput constraints. Network slicing addresses this by creating dedicated virtualized segments optimized for performance and security. Advanced fault tolerance at the container and instance levels enhances system reliability. The proposed architecture ensures high throughput, low latency, and secure orchestration for real-time anomaly detection in OT networks. Performance evaluations validate its efficiency in throughput, deployment, and learning accuracy, providing a robust foundation for future ICS automation and data-driven decision-making.

Delgado, Brian G. Rodiles [University of Texas at ↗

Implementation and characterization of a 320-slice volumetric CT scanner for simulation in radiation oncology

Purpose: Effective target definition and broad employment of treatment response assessment with dynamic contrast-enhanced CT in radiation oncology requires increased speed and coverage for use within a single bolus injection. To this end, a novel volumetric CT scanner (Aquilion One, Toshiba, Tochigi Pref., Japan) has been installed at the Princess Margaret Hospital for implementation into routine CT simulation. This technology offers great advantages for anatomical and functional imaging in both scan speed and coverage. The aim of this work is to investigate the system's imaging performance and quality as well as CT quantification accuracy which is important for radiotherapy dose calculations. Methods: The 320-slice CT scanner uses a 160 mm wide-area (2D) solid-state detector design which provides the possibility to acquire a volumetric axial length of 160 mm without moving the CT couch. This is referred to as ''volume'' and can be scanned with a rotation speed of 0.35-3 s. The scanner can also be used as a 64-slice CT scanner and perform conventional (axial) and helical acquisitions with collimation ranges of 1-32 and 16-32 mm, respectively. Commissioning was performed according to AAPM Reports TG 66 and 39 for both helical and volumetric imaging. Defrise and other cone-beam image analysis tests were performed. Results: Overall, the imaging spatial resolution and geometric efficiency (GE) were found to be very good (>10 lp/mm, <1 mm spatial integrity and GE{sub 160mm}=85%) and within the AAPM guidelines as well as IEC recommendations. Although there is evidence of some cone-beam artifacts when scanning the Defrise phantom, image quality was found to be good and sufficient for treatment planning (soft tissue noise <10 HU). Measurements of CT number stability and contrast-to-noise values across the volume indicate clinically acceptable scan accuracy even at the field edge. Conclusions: Initial experience with this exciting new technology confirms its accuracy for routine CT simulation within radiation oncology and allows for future investigations into specialized dynamic volumetric imaging applications.

61 RADIATION PROTECTION AND DOSIMETRY↗

Sliced-Inverse-Regression--Aided Rotated Compressive Sensing Method for Uncertainty Quantification

Compressive-sensing-based uncertainty quantification methods have become a pow- erful tool for problems with limited data. In this paper, we use the sliced inverse regression (SIR) method to provide an initial guess for the alternating direction method, which is used to enhance sparsity of the Hermite polynomial expansion of stochastic state variables. The sparsity improvement increases both the efficiency and accuracy of the compressive-sensing-based uncertainty quantification method. We demonstrate that the initial guess from SIR is more suitable for the cases when the available data is very limited (Algorithm 4). We also propose another algorithm (Algorithm 5) that performs dimension reduction first with sliced inverse regression, then constructs a Hermite polynomial expansion of the reduced model. This method allows us to approximate the statistics accurately with even less available data. Both methods are non-intrusive and require no a priori information of the sparsity of the system. We demonstrate the effectiveness of these two methods (Algorithms 4 and 5) using problems with up to 500 random dimensions.

Yang, Xiu↗

SLICE

For most of their lifetime, pebble-bed reactors (PBRs) operate at an equilibrium state in which the core is filled with fuel pebbles at various levels of burnup. A fuel pebble travels multiple times in so-called passes through the reactor before it reaches its target discharge burnup and is replaced with a fresh fuel pebble. Given the stochastic nature of the fuel pebble travel paths and consequently the individual fuel pebble histories, it is not possible with standard methods developed for traditional reactor concepts to calculate the fuel inventory in the reactor core. An iterative approach, the SCALE Leap-In method for Cores at Equilibrium (SLICE), was developed to generate region-average fuel inventory for a PBR. The SLICE code enables automatic generation of input files for the SCALE code system (https://www.ornl.gov/scale), management of the SCALE result files, and analysis of results.

Bostelmann, Friederike [Oak Ridge National Laborat↗

Evaluating multi-slice ptychography tomography for X-ray imaging

X-ray ptychography typically relies on single-slice reconstruction approaches that assume minimal beam propagation through the specimen. However, this approximation breaks down for thick samples or when using high numerical aperture optics, leading to reconstruction artifacts due to multiple scattering. Multi-slice ptychographic tomography (MSPT) addresses this limitation by explicitly modeling beam propagation through the specimen while reducing angular sampling requirements for tomography, but its performance depends critically on reconstruction parameters and experimental conditions. Here, we systematically evaluate MSPT using numerical simulations and experimental X-ray datasets to understand how factors such as object thickness, optical parameters, and initialization strategies affect reconstruction accuracy. We demonstrate that informed object initialization significantly improves depth resolution and enables accurate projection extension, reducing the angular sampling requirements for tomographic reconstruction. Experimental demonstration confirms that MSPT produces reconstructions with reduced artifacts, establishing it as a robust approach for nanoscale imaging at modern synchrotron facilities.

Luktuke, Amey [Argonne National Laboratory (ANL), ↗

Estane Molecular Weight Analysis in PBX 9501 Samples; Slice 'N Dice Study

T Division is creating a model of aging in PBX 9501 that will benefit from molecular weight mapping of hemispherical charges (“hemi’s”) that have been in the stockpile. Two hemi’s were prepared at Pantex by machining out sections and then machining those sections into cubes, which is why the project is referred to as a “Slice ‘N Dice” study. Two sections were cut from each hemi. One section was used for density mapping and the other was for molecular weight analysis. The molecular weight section pieces were cut so that both Pantex and LANL would be able to analyze cubes from approximately the same areas in order to compare results. Pantex analyzed all of their samples earlier in 2011. LANL’s Slice ‘N Dice samples were received in February of 2012 where they were inventoried, weighed and prepared by WX-7 and analyzed by both WX-7 and MST-7.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Frontal Slice Approaches for Tensor Linear Systems

Inspired by the row and column action methods for solving large-scale linear systems, in this work, we explore the use of frontal slices for solving tensor linear systems. In particular, this paper presents a novel approach for using frontal slices of a tensor $\mathcal{A}$ to solve tensor linear systems $\mathcal{A} ∗\mathcal{X} = \mathcal{B}$ where ∗ denotes the $t$-product. In addition, we consider variations of this method, including cyclic, block, and randomized approaches, each designed to optimize performance in different operational contexts. Our primary contribution lies in the development and convergence analysis of these methods. Experimental results on synthetically generated and real-world data, including applications such as image and video deblurring, demonstrate the efficacy of our proposed approaches and validate our theoretical findings.

Luo, Hengrui↗

ERTS-1 image enhancement by optically combining density slices

The technique of density slicing using a photographic film and its application to enhancement of ERTS-1 imagery has proved to be useful for mapping varigated areal phenomena and provides a useful supplement ot the I2S MiniAddcol viewing system. The intial experiments conducted with this film were encouraging, and indicated that this technique of density slicing using readily accessible darkroom facilities and simple darkroom procedures allows rapid, accurate, and facile interpretation of certain areal phenomena to be made from the imagery. The distribution of the tree yucca, Yucca brevifolia Jaegeriana, in the eastern Mojave Desert of Southern California and southern Nevada was used as an example to test the accuracy of the technique for mapping purposes. The distribution was mapped at a relatively high level of accuracy.

Tapper, G. O.↗

Use of Sirtl etch for silicon-slice evaluation.

An investigation was conducted to explore the possibility of using Sirtl etch as a nondestructive evaluation step for categorizing silicon wafers before device fabrication is begun. It is known that chromium is deposited as a residue during the chemical reaction associated with etching silicon in Sirtl etch. There has been concern that the use of Sirtl etch could result in the diffusion of chromium into the silicon slice during subsequent high-temperature processing steps. The investigation revealed, however, that residual chromium resides only on the surface of the slice and can easily be removed.

Porter, W. A.↗

Development of a slicing device for Apollo-Soyuz Test Project (ASTP) electrophoresis technology experiment MA-011

The electrophoresis of six columns was accomplished on the Apollo-Soyuz test Project. After separation, these columns were frozen in orbit and were returned for ground-based analyses. One major goal of the MA-011 experiment was the assessment of the separation achieved in orbit by slicing these frozen columns. The slicing of the frozen columns required a new device. The development of that device is described.

Nerren, B. H.↗

Slicing of silicon into sheet material. Silicon sheet growth development for the large area silicon sheet task of the low cost silicon solar array project

Fabrication of a prototype large capacity multiple blade slurry saw is considered. Design of the bladehead which will tension up to 1000 blades, and cut a 45 cm long silicon ingot as large as 12 cm in diameter is given. The large blade tensioning force of 270,000 kg is applied through two bolts acting on a pair of scissor toggles, significantly reducing operator set-up time. Tests with an upside-down cutting technique resulted in 100% wafering yields and the highest wafer accuracy yet experienced with MS slicing. Variations in oil and abrasives resulted only in degraded slicing results. A technique of continuous abrasive slurry separation to remove silicon debris is described.

Holden, S. C.↗

Development of methods of producing large areas of silicon sheet by the slicing of silicon ingots using Inside Diameter (I.D.) saws

Modifications to a 16 inch STC automated saw included: a programmable feed system; a crystal rotating system; and a STC dynatrack blade boring and control system. By controlling the plating operation and by grinding the cutting edge, 16 inch I.D. blades were produced with a cutting edge thickness of .22 mm. Crystal rotation mechanism was used to slice 100 mm diameter crystals with a 16 inch blade down to a thickness of .20 mm. Cutting rates with crystal rotation were generally slower than with standard plunge I.D. slicing techniques. Using programmed feeds and programmed rotation, maximum cutting rates were from 0.3 to 1.0 inches per minute.

Aharonyan, P.↗