Search NASA⌕ Search

SEARCH · Search NASA

Results for “SPACECRAFT MOTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Relative Motion of Two Spacecraft Near the Sun-Earth L2 Point

Over the next two decades international space agencies including the National Aeronautics and Space Administration and the European Space Agency are proposing space missions which employ distributed spacecraft technologies to enable vast improvements in remote sensing performance as compared to fundamental performance limitations associated with fairing sizes of even the largest launch vehicles. These missions will require numerous advanced technologies to enable some extreme scientific goals. However, on the critical path to developing many of those technologies, understanding realistic achievable performance, and formulating such missions involving formation flying spacecraft, is the detailed understanding of the vehicle relative motion in the appropriate dynamic environment. Due to the appealing gravitational and thermal environment, the Sun-Earth L(sub 2) point is a strong candidate for placement of many of these missions. Henceforth, this paper begins to unravel the dynamics of relative motion near L(sub 2), with particular consideration given to the ultimate requirements for flying space- craft in precise formation. This work is meant to be a predecessor to detailed formation flying mission analysis efforts in the areas of formation design, formation control, and relative navigation.

Collange, Guillaume↗

Motion of the angular momentum vector in body coordinates for torque-free dual-spin spacecraft

The motion of the angular momentum vector in body coordinates for torque free, asymmetric dual spin spacecraft without and, for a special case, with energy dissipation on the main spacecraft is investigated. Without energy dissipation, two integrals can be obtained from the Euler equations of motion. Using the classical method of elimination of variable, the motion about the equilibrium points (six for the general case) are derived with these integrals. For small nutation angle, theta, the trajectories about the theta = 0 deg and theta = 180 deg points readily show the requirements for stable motion about these points. Also the conditions needed to eliminate stable motion about the theta = 180 deg point as well as the other undesireable equilibrium points follow directly from these equations. For the special case where the angular momentum vector moves about the principal axis which contains the momentum wheel, the notion of 'free variable' azimuth angle is used. Physically this angle must vary from 0 to 2 pi in a circular periodic fashion. Expressions are thus obtained for the nutation angle in terms of the free variable and other spacecraft parameters. Results show that in general there are two separate trajectory expressions that govern the motion of the angular momentum vector in body coordinates.

Fedor, J. V.↗

Experimental study of transient liquid motion in orbiting spacecraft

A test program was conducted involving forty-five drops of liquid propellant in instrumented tanks. Biaxial, low-g accelerations were applied to the model propellant tanks during free-fall testing, and forces exerted during liquid reorientation were measured and recorded. High speed photographic records of the liquid reorientation were also made. The test data was used to verify a mechanical analog which portrays the liquid as a point mass moving on an ellipsoidal constraint surface. The mechanical analog was coded into two FORTRAN 4 digital computer programs. Results showed excellent correlation between test data and analytical predictions of reorientation forces and liquid center of mass motion, verifying the basic analytical approach.

Berry, R. L.↗

Testing a satellite automatic nutation control system

Testing of a particular nutation control system for the synchronous meteorological satellite (SMS) is described. The test method and principles are applicable to nutation angle control for other satellites with similar requirements. During its ascent to synchronous orbit, a spacecraft like the SMS spins about its minimum-moment-of-inertia axis. An uncontrolled spacecraft in this state is unstable because torques due to fuel motion increase the nutation angle. However, the SMS is equipped with an automatic nutation control (ANC) system which will keep the nutation angle close to zero. Because correct operation of this system is critical to mission success, it was tested on an air-bearing table. The ANC system was mounted on the three-axis air-bearing table which was scaled to the SMS and equipped with appropriate sensors and thrusters. The table was spun up in an altitude chamber and nutation induced so that table motion simulated spacecraft motion. The ANC system was used to reduce the nutation angle. This dynamic test of the ANC system met all its objectives and provided confidence that the ANC system will control the SMS nutation angle.

Hrasiar, J. A.↗

Analytic solutions for dual-spin spacecraft during platform motion

This paper presents analytic solutions to the dynamic equations of dual-spinners during platform slews. The rotor is assumed to be an axisymmetric balanced rigid body. The platform is an asymmetric rigid body with small static and dynamic imbalances. The solutions given in this paper extend a previous theory which provided an approximate solution only in the steady state.

Hayati, S.↗

Distributed Spatiotemporal Motion Planning for Spacecraft Swarms in Cluttered Environments

This paper focuses on trajectory planning for spacecraft swarms in cluttered environments, like debris fields or the asteroid belt. Our objective is to reconfigure the spacecraft swarm to a desired formation in a distributed manner while minimizing fuel and avoiding collisions among themselves and with obstacles. In our prior work we proposed a novel distributed guidance algorithm for spacecraft swarms in static environments. In this paper, we present the Multi-Agent Moving-Obstacles Spherical Expansion and Sequential Convex Programming (MAMO SE-SCP) algorithm that extends our prior work to include spatiotemporal constraints such as time-varying, moving obstacles and desired time-varying terminal positions. In the MAMO SE-SCP algorithm, each agent uses a spherical-expansion-based sampling algorithm to cooperatively explore the time-varying environment, a distributed assignment algorithm to agree on the terminal position for each agent, and a sequential-convex-programming-based optimization step to compute the locally-optimal trajectories from the current location to the assigned time-varying terminal position while avoiding collision with other agents and moving obstacles. Simulation results demonstrate that the proposed distributed algorithm can be used by a spacecraft swarm to achieve a time-varying, desired formation around an object of interest in a dynamic environment with many moving and tumbling obstacles.

Bandyopadhyay, Saptarshi↗

Distributed Fast Motion Planning for Spacecraft Swarms in Cluttered Environments using Spherical Expansions and Sequence of Convex Optimization Problems

This paper presents a novel guidance algorithm for spacecraft swarms in an environment cluttered with many obstacles like a debris field or the asteroid belt. The objective of this algorithm is to reconfigure the swarm to a desired formation in a distributed manner while minimizing fuel and avoiding collisions among themselves and with the obstacles. The agents first use a spherical-expansion-based sampling algorithm to cooperatively explore the workspace and find paths to the desired terminal positions. Using a distributed assignment algorithm, the agents converge on an optimal assignment of the target locations in the desired formation. Then each agent generates a locally optimal trajectory from its current location to its terminal position by solving a sequence of convex optimization problems. As the agent moves along this trajectory, it receives the position of other agents and updates its trajectory to avoid collisions with other agents and the obstacles. Thus the swarm achieves the desired formation in a distributed manner while avoiding collisions. Moreover, this algorithm is computationally efficient, therefore it can be implemented onboard resource-constrained spacecraft. Simulations results show that the proposed distributed algorithm can be used by a spacecraft swarm to reconfigure a desired formation around an asteroid in a collision-free manner.

Bandyopadhyay, Saptarshi↗

Distributed Spatiotemporal Motion Planning for Spacecraft Swarms in Cluttered Environments

This paper focuses on trajectory planning for spacecraft swarms in cluttered environments, like debris fields or the asteroid belt. Our objective is to reconfigure the spacecraft swarm to a desired formation in a distributed manner while minimizing fuel and avoiding collisions among themselves and with the obstacles. In our prior work we proposed a novel distributed guidance algorithm for spacecraft swarms in static environments.1 In this paper, we present the Multi-Agent Moving-Obstacles Spherical Expansion and Sequential Convex Programming (MAMO SE–SCP) algorithm that extends our prior work to include spatiotemporal constraints such as time-varying, moving obstacles and desired time-varying terminal positions. In the MAMO SE–SCP algorithm, each agent uses a spherical-expansion-based sampling algorithm to cooperatively explore the time-varying environment, a distributed assignment algorithm to agree on the terminal position for each agent, and a sequential-convex-programming-based optimization step to compute the locally-optimal trajectories from the current location to the assigned time-varying terminal position while avoiding collision with other agent and the moving obstacles. Simulations results demonstrate that the proposed distributed algorithm can be used by a spacecraft swarm to achieve a time-varying, desired formation around an object of interest in a dynamic environment with many moving and tumbling obstacles.

Hadaegh, Fred Y.↗

Deriving the velocity distribution of meteoroids from the measured meteoroid impact directionality on the various LDEF surfaces

Because of spacecraft orbital motion about the Earth, a much higher flux of meteoroids is expected to strike spacecraft surfaces that face in the direction of spacecraft motion (apex direction) than would strike apex facing or trailing edge surfaces. Impact velocities are also higher on apex facing surfaces compared to antapex facing surfaces which futher increases the apex/antapex ratio of spatial density of impact craters of a given size. Measurements of the areal densities of impact craters on the different LDEF surfaces should give important clues about the velocity distribution, and therefore the origins, of meteoroids. Preliminary results appear to support the meteoroid velocity distributions derived by Erickson and by Kessler, which would lead to a mean impact velocity on the LDEF spacecraft of about 19 km/s.

Zook, Herbert A.↗

Equations of motion for maneuvering flexible spacecraft

This paper is concerned with the derivation of the equations of motion for maneuvering flexible spacecraft both in orbit and in an earth-based laboratory. The structure is assumed to undergo large rigid-body maneuvers and small elastic deformations. A perturbation approach is presented in which the quantities defining the rigid-body maneuver are regarded as the unperturbed motion and the elastic motions and deviations from the rigid-body motions are regarded as the perturbed motion. The perturbation equations are linear, non-self-adjoint, and with time-dependent coefficients. A maneuver force distribution exciting the least amount of elastic deformation of the spacecraft is developed. Numerical results highlight the vibration caused by rotational maneuvers.

Meirovitch, L.↗

Disturbing effects of attitude control maneuvers on the orbital motion of the Helios spacecraft

The position of the spin axis of the Helios A spacecraft has been maintained and updated by a series of attitude control maneuvers, by means of a sequence of unbalanced jet forces which produce an additional disturbed motion of the spacecraft's center of mass. The character of this motion, its magnitude and direction was studied. For practical purposes of the orbit determination of the spacecraft, a computer program is given which shows how the components of the disturbing acceleration in the spacecraft-fixed reference frame can be easily computed.

Georgevic, R. M.↗

Pointing compensation system for spacecraft instruments

A closed loop system reduces pointing errors in one or more spacecraft instruments. Associated with each instrument is a electronics package (3) for commanding motion in that instrument and a pointing control system (5) for imparting motion in that instrument in response to a command (4) from the commanding package (3). Spacecraft motion compensation logic (25) compensates for instrument pointing errors caused by instrument-motion-induced spacecraft motion. Any finite number of instruments can be so compensated, by providing each pointing control system (5) and each commanding package (3), for the instruments desired to be compensated, with a link to the spacecraft motion compensation logic (25). The spacecraft motion compensation logic (25) is an electronic manifestation of the algebraic negative of a model of the dynamics of motion of the spacecraft. An example of a suitable model, and computer-simulated results, are presented.

Plescia, Carl T.↗

Mathematical crew motion disturbance models for spacecraft control system design

Several techniques for modeling the disturbances to a spacecraft's attitude caused by moving crew members are presented. These disturbances can be the largest moments acting on a manned spacecraft, and knowledge of their effect is important in the sizing, design, and analysis/simulation of spacecraft attitude control systems. The modeling techniques are identified as two principal types: deterministic and stochastic. Three techniques of each type are presented. The deterministic models include point-mass motion derivatives and a discussion on dynamic models of moving crew members. The stochastic techniques are highlighted by a Fourier transform method and the representation of long-term crew disturbance activities as outputs from appropriately designed filters. A z-transform technique is developed to obtain a difference-equation form of stochastic models for use on digital computers. An appendix derives spacecraft equations of motion which can be used with many of the models discussed.

Conway, B. A.↗