SEARCH · Search NASA

Results for “STAGNATION REGION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Experimental and Theoretical Evaluation of Feed Flow Collar Design for Shell Fed Hollow Fiber Membrane Modules

An experimental and theoretical study of module collar design is presented here. Hollow fiber membranes are prepared by dip coating a poly(vinylidene) (PVDF) support with a polydimethylsiloxane (PDMS) gutter layer and a Pebax 2533 selective layer. Fiber bundles with a well-defined fiber packing are prepared using a 3D printed module. A parallel fiber bundle consisting of 4-9 uniformly spaced fibers is created with printed tabs that align the fibers and create a tubesheet. The tabs are sealed within a printed case that possesses a series of external ports for gas introduction and removal. Uniquely, both port location and the use of a collar to assist fluid distribution in the shell can be varied for the same fiber bundle. Experimental measurements are compared to computational fluid dynamics (CFD) simulations. The experimental module design allows high-fidelity representation of the fiber bundle and module case in the simulations. Comparisons between experiment and simulation are in good agreement over a broad range of experimental conditions. The detrimental effect of having ports located too close, leading to stagnation regions, is captured as well as the beneficial effects of using a collar for shell-side fluid distribution around the fiber bundle. Such results help validate the use of CFD to develop high-performance module designs.

Tran, Thien↗

DOE OSTI2026

Implementation of a High-Mach Integral Boundary Layer Method for Arbitrary Streamlined Body Geometry

The Momentum-Energy Integral Technique (MEIT) is an integral boundary layer method for the high-Mach flow regime used to approximate heat transfer and viscous force quantities of interest along streamlines of an inviscid flow solution on the surface of a flight vehicle. This method allows rapid mid-fidelity estimation of these quantities which would otherwise require a much more expensive viscous flow solution to produce. Integral boundary layer methods like MEIT have been around for decades, though usually only formulated for simple geometries such as 2-dimensional wing shapes or axi-symmetric nose shapes. The implementation discussed herein has been generalized to apply to any 3-dimensional streamlined body geometry through correct treatment of the curvilinear axes (streamline attached) momentum and energy entrainment terms, and handling of arbitrary stagnation region geometry. This implementation is provided as a software package for the Python environment, along with readers for common inviscid flow solution providers such as NASA’s CART3D flow solver.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS1970

Analysis of surface ablation of noncharring materials

Computer program solves combined problem of heat transfer and material response for the stagnation region of blunt bodies experiencing melting and vaporizing or subliming ablation. Program contains formulas for the transitional regime to bridge between the free-molecule and continuum regimes.

Matting, F. W.↗

NASA NTRS1972

Gas physics environment of high altitude Jovian entry.

A description of the gas physics environment associated with high-altitude Jupiter entry is reported. Two aspects of environmental analysis are treated. First, limited discussion is devoted to prediction of the heating environment of the probe aeroshell. Prime emphasis is given to the second aspect of the analysis, a description of the gas particle probe interaction phenomena in the rarefied flow regime. Several molecular reemission models have been devised and exercised. Model selection was based upon the desire to bracket the expected reemission characteristics. Consideration was given to examining diffuse reflection as exemplified by the Maxwellian model and lobular, specular reflection as characterized by the Nocilla model. Variation of fundamental input parameters was investigated to determine particle-probe interaction sensitivity. Regardless of neutral species type, results show that the attenuation of the incoming flux of that species by reflected particles is approximately 15 per cent in the stagnation region at 200 km above the cloud tops.

Lefferdo, J. M.↗

NASA NTRS1972

Magnetogasdynamic heat transfer to a hemispherical body in a supersonic argon plasma.

Measurements of the heat transfer to a hemispherical body in a Mach 4.6, low density, argon plasma are reported. The experiments demonstrated that local wall currents affected the heat flux to the electrically conducting surface, both without and with internally applied magnetic fields. Such currents were induced by a nonuniform shock-layer plasma potential; but with applied fields, Hall currents dominated. Magnetic fields significantly increased the stagnation-region heat flux while causing a reduction over the remainder of the hemisphere. For an electrically nonconducting surface, the local heat flux was reduced, and magnetic fields insignificantly affected the heat flux. Analytical treatments indicate that joule and radiation heating were negligible.

Nowak, R. J.↗

NASA NTRS1972

Study of structural active cooling and heat sink systems for space shuttle

This technology investigation was conducted to evaluate the feasibility of a number of thermal protection systems (TPS) concepts which are alternate candidates to the space shuttle baseline TPS. Four independent tasks were performed. Task 1 consisted of an in-depth evaluation of active structural cooling of the space shuttle orbiter. In Task 2, heat sink concepts for the booster were studied to identify and postulate solutions for design problems unique to heat sink TPS. Task 3 consisted of a feasibility demonstration test of a phase change material (PCM) incorporated into a reusable surface insulation (RSI) thermal protection system for the shuttle orbiter. In Task 4 the feasibility of heat pipes for stagnation region cooling was studied for the booster and the orbiter. Designs were developed for the orbiter leading edge and used in trade studies of leading edge concepts. At the time this program was initiated, a 2-stage fully reusable shuttle system was envisioned; therefore, the majority of the tasks were focused on the fully reusable system environments. Subsequently, a number of alternate shuttle system approaches, with potential for reduced shuttle system development funding requirements, were proposed. Where practicable, appropriate shifts in emphasis and task scoping were made to reflect these changes.

Source record↗

NASA NTRS1972

Mass diffusion in a self-confined rotating flow

The effectiveness of fluid containment near an interior stagnation point and within a self-confined stagnation region is determined by numerically solving the species conservation equation for a bi-component mixture. The flow geometry is that of a swirling fluid stream containing a stationary eddy on the axis of rotation. The base flow is axisymmetric, and the Reynolds number is equal to 50. Schmidt numbers range from 0.1 to 10.

Torrance, K. E.↗

NASA NTRS1972

Radiative and convective heating during Venus entry.

Determination of the stagnation region heating of probes entering the Venusian atmosphere. Both convective and radiative heat-transfer rates are predicted, and account is taken of the important effects of radiative transport in the vehicle shock layer. A nongray radiative transport model is utilized which parallels a four-band treatment previously developed for air (Page et al., 1969), but includes two additional bands to account for the important CO(4+) molecular band system. Some comparisons are made between results for Venus entry and results for earth entry obtained using a viscous earth entry program.

Page, W. A.↗

NASA NTRS1974

PERF - A new approach to the experimental study of radiative aerodynamic heating and radiative blockage by ablation products

The present work describes a facility designed to validate the various aspects of radiative flow field theory, including the absorption of shock layer radiation by ablation products. The facility is capable of producing radiation with a spectrum similar to that of an entry vehicle shock layer and is designed to allow measurements at vacuum ultraviolet wavelengths where the most significant absorption by ablation products is predicted to occur. The design concept of the facility is presented along with results of theoretical analyses carried out to assess its research potential. Experimental data obtained during tests that simulated earth and Venusian entry and in which simulated ablation products were injected into the stagnation region flow field are discussed.

Walberg, G.↗

NASA NTRS1975

An experimental study of ultraviolet radiation behind incident normal shock waves in CO2 at Venusian entry speeds

Radiation intensity profiles behind incident normal shock waves in pure CO2 have been measured spectroscopically in the Langley Arc-Driven Shock Tube. These profiles, which were obtained for shock velocities between 9 and 13 km/sec and ambient densities corresponding to Venus altitudes between 100 and 80 km, were measured in the vacuum ultraviolet regime. Wavelengths of 127.7, 158.0, 177.5, and 195.0 nm were monitored simultaneously using a four-channel vacuum spectrograph equipped with sodium-salicylate-coated photomultipliers, thereby including the CO(4+) band system which is the most prominent radiator. Measured nonequilibrium overshoots are modeled to provide a means of estimating the effect of nonequilibrium radiation heating to the stagnation region of proposed aero-shells for Venusian entry. These results indicate a significant increase in radiative heating due to nonequilibrium effects. The measurements are believed to represent the most accurate data available on the effect of nonequilibrium radiative heat transfer for Venus entry. This accuracy is primarily due to improved spectrographic instrumentation, which is discussed in some detail regarding its application in related studies.

Nealy, J. E.↗

NASA NTRS1976

Entry into outer planet environments. I - The radiating shock layer with coupled ablation for carbon and silica

Fully coupled solutions of shock layer equations for the stagnation region are obtained, comprising a set of converged benchmark flowfield solutions for silica and carbon heat shields entering modeled atmospheres of Saturn and Uranus. Model atmospheres and entry trajectories providing significant radiative heating to the entry probes so that the heating environment and effects of mass addition on the heating environment are clearly defined are emphasized. Results referable to the carbon heat shield are questioned because of the high (sublimation) wall temperature assumed and the relatively low shock layer temperature.

Liu, C.-H.↗

NASA NTRS1977

Apparatus for experimental investigation of aerodynamic radiation with absorption by ablation products

A description is given and calibration procedures are presented for an apparatus that is used to simulate aerodynamic radiant heating during planetary entry. The primary function of the apparatus is to simulate the spectral distribution of shock layer radiation and to determine absorption effects of simulated ablation products which are injected into the stagnation region flow field. An electric arc heater is used to heat gas mixtures that represent the planetary atmospheres of interest. Spectral measurements are made with a vacuum ultraviolet scanning monochromator.

Wells, W. L.↗

NASA NTRS1977

Engineering approximations for Jovian entry

A code has been written to describe the behavior of an ablating heat shield throughout the entire maneuver into a planetary atmosphere. The code includes a trajectory computation for a variable mass, a computation of the heating history and distribution over the probe, ablation effects, indepth material response, and shape change. The code draws the initial and final shapes of the heat shield and computes its initial and final mass. Results are compared with those of other investigators, and solutions are obtained for a silica heat shield entering three model atmospheres of Jupiter. The effects of varying half cone angle and entry angle are examined as well as shape change effects. The so-called 'cusping effect' in the stagnation region is examined.

Lasher, L. E.↗

NASA NTRS1977

A study of the aerothermal environment for the Pioneer Venus multiprobe mission

In December 1978, four Pioneer Venus probe spacecraft are scheduled for almost simultaneous entry into the Venusian atmosphere at widely dispersed points about the planet. In this study, both detailed and approximate flow field analyses are used to define the entry aerothermal environment for the forebody of each of the four probes. The results show that approximate analyses can be used to predict inviscid radiative and laminar convective heating rates with acceptable accuracy. However, the radiative heating rates obtained with inviscid analyses are significantly greater than those obtained with a nonablating viscous-shock-layer (VSL) analysis, because the VSL analysis includes a strongly absorbing boundary layer. Also, the results show that the radiative heating is sensitive to small variations in atmospheric gas composition while the convective heating is not affected. With carbon-phenolic injection, the convective heating is reduced substantially while the overall radiative heating reduction is very small. Most of the radiative blockage occurs in the atomic line transitions which is significant only in the stagnation region.

Moss, J. N.↗

NASA NTRS1978

Aerothermodynamic environment for Jovian entry with silica heat shield

Solutions are presented for the stagnation-region shock-layer equations, including radiative transfer with spectral lines and silica ablation during Jovian entry. Results for variations of entry angle, sphere-cone configuration, and atmospheric model are given. The effect of silica ablation on the radiative and convective surface heating is correlated with the ratio of the wall to free-stream mass flux. Correlations are also given for spectral distributions. The effect of newly obtained SiO radiation properties on the surface heating is examined.

Green, M. J.↗

NASA NTRS1978

Carbon vaporization into a nonequilibrium, stagnation-point boundary layer

The heat transfer to the stagnation point of an ablating carbonaceous heat shield, where both the gas-phase boundary layer and the heterogeneous surface reactions are not in chemical equilibrium, is examined. Specifically, the nonequilibrium changes in the mass fraction profiles of carbon species calculated for frozen flow are studied. A set of equations describing the steady-state, nonequilibrium laminar boundary layer in the axisymmetric stagnation region, over an ablating graphite surface, is solved, with allowance for the effects of finite rate of carbon vaporization.

Suzuki, T.↗

NASA NTRS1979

On the question of instabilities upstream of cylindrical bodies

In an attempt to understand the unsteady vortical phenomena in perturbed stagnation regions of cylindrical bodies, a critical review of the theoretical and experimental evidence was made. Current theory is revealed to be incomplete, incorrect, or inapplicable to the phenomena observed experimentally. The formalistic approach via the principle of exchange of instabilities should most likely be replaced by a forced-disturbance approach. Also, many false conclusions were reached by ignoring that treatment of the base and perturbed flows in Hiemenz coordinate eta is asymptotic in nature. Almost surely the techniques of matched asymptotic expansions are expected to be used to capture correctly the diffusive and vorticity amplifying processes of the disturbances regarding the mean-flow boundary layer and outer potential field as eta and y/diameter approach infinity. The serious uncertainties in the experiments are discussed in detail.

Morkovin, M. V.↗

NASA NTRS1980

Application of a numerically generated orthogonal coordinate system to the solution of inviscid axisymmetric supersonic flow over blunt bodies

A numerically generated orthogonal coordinate system (with the body surface and shock wave as opposite boundaries) was applied with a time asymptotic method to obtain steady flow solutions for axisymmetric inviscid flow over several blunt bodies including spheres, paraboloids, ellipsoids, hyperboloids, hemisphere cylinders, spherically blunted cones, and a body with a concavity in the stagnation region. Comparisons with experimental data and with the results of other computational methods are discussed. The numerically generated orthogonal coordinate system is described and applications of the method to complex body shapes, particularly those with concave regions, are discussed.

Hamilton, H. H., II↗