Search NASA⌕ Search

SEARCH · Search NASA

Results for “STANDARD ATMOSPHERE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

The meteorological structure of the mesosphere including seasonal and latitudinal variations.

Evaluation of a large number of meteorological sounding of the mesosphere performed by the acoustic grenade technique and the pitot probe technique. An attempt is made to produce a climatology of observed values of temperature, pressure, density, and wind at various latitudes and seasons which will update and supplement the standard atmospheres and provide realistic inputs for computations involving neutral and ion composition, energy propagation, and transport processes. Temperature-time cross sections over the various observation stations are presented, as well as quasi-meridional cross sections of temperature, pressure, and density, maps of mean zonal and mean meridional winds, and maps of mean winter and mean summer circulation at various levels.

Theon, J. S.↗

Agricultural resources investigations in northern Italy and southern France, Agreste project. Part 1: Activity performed on the Italian test sites

The author has identified the following significant results. It was found that the standard atmospheric correction procedure cannot be successfully applied to water targets if a better correlation of MSS data with radiance input to LANDSAT sensors was not reached. It was confirmed that the six line effect must be avoided unless more sophisticated data handling techniques allow subtraction of various amounts of path radiance for the six satellite detectors. The COPTRAN program for atmospheric corrections of scan angle influence on atmospheric path was modified and completed. Six rice varieties were discriminated in proportions ranging from 65 percent to more than 80 percent. The same techniques were applied to poplar groves with a 70 percent precision.

Source record↗

U.S. terrestrial solar cell calibration and measurement procedures

An outline is presented of changes in measurement procedures concerning solar cells. Outdoor measurements of cell performance based on pyranometer or pyrheliometer determination of intensity are discouraged. The absolute scale of irradiance is to be adopted as soon as possible. The standard atmosphere conditions are 1000 W/sq m irradiance, temperature 28 C, air mass 1.5, and precipitable water vapor content of 2 cm. The allowable light sources for solar simulation are short arc xenon lamps, pulsed xenon lamps, and dichroic filtered tungsten lamps. Key considerations in the design of a reference cell are considered and approaches for the matching of a reference cell to a test cell or modules are discussed.

Brandhorst, H. W., Jr.↗

Application of a microprocessor controlled lidar to tropospheric ozone measurements

A microprocessor controlled lidar system under construction at the NASA Goddard Space Flight Center is described and the problems in making space-based measurements of tropospheric ozone are considered. The differential absorption lidar using a dual wavelength, pulsed CO2 laser and direct detection receiver can significantly improve the existing global data base on tropospheric ozone burden. Sensitivity to tropospheric ozone can be obtained in the spaceborne version of lidar by selecting laser lines located in the wings of the target zone lines. Simulation studies using various laser line pairs in the P-branch of the CO2 9.4 micron band show that the ozone burden retrieval may be weighted to particular altitude regions. These simulation studies are based on numerical integration of differences in absorption coefficient at the two selected laser wavelengths using the AFGL absorption line parameter compilations, U.S. Standard Atmosphere ozone profile, and laser software. Simulation, data collection and reduction are performed by a microprocessor subsystem of the CO2 lidar.

Stewart, R. W.↗

Vertical resolving power of a satellite temperature sounding system

The paper examines the vertical resolving power of satellite temperature retrieval systems. Attention is given to sounding instrument proposed by Kaplan, et al., (1977) which has been conceived to have greatly improved vertical resolving capabilities. Two types of tests are reported. The first, based on the work of Conrath (1972), involves a theoretical assessment of the manner by which the ambient temperature profile is averaged over height in order to produce an estimate of temperature at a given level. The second test is empirical involving the actual retrieval of temperature signals superimposed on a standard atmosphere with an emphasis on determining the minimum separation of the signals for which the sounder system is still capable of distinguishing individual signals.

Thompson, O. E.↗

Crop identification and leaf area index calculations with Landsat multitemporal data

Formulas are given to convert land-based vegetative canopy spectral reflectance measurements into Landsat digital counts in the four channels for a clear standard atmosphere. These formulas are shown to predict the curves found by plotting multitemporal Landsat trajectories. With correct interpretation, plots of channel 3 versus channel 4 Landsat data for crops are shown to yield information on both crop identification and crop leaf area index.

Chance, J. E.↗

Input/output models for general aviation piston-prop aircraft fuel economy

A fuel efficient cruise performance model for general aviation piston engine airplane was tested. The following equations were made: (1) for the standard atmosphere; (2) airframe-propeller-atmosphere cruise performance; and (3) naturally aspirated engine cruise performance. Adjustments are made to the compact cruise performance model as follows: corrected quantities, corrected performance plots, algebraic equations, maximize R with or without constraints, and appears suitable for airborne microprocessor implementation. The following hardwares are recommended: ignition timing regulator, fuel-air mass ration controller, microprocessor, sensors and displays.

Sweet, L. M.↗

Solar cell measurements

The measurement of the electrical performance characteristics of individual solar cells is discussed. One of the reasons is determination of the output power, measurement of the effect of various degradation mechanisms, and separation of cells by current and voltage for eventual use in series and parallel combinations. Major problem areas in making accurate performance measurements are the determination of the irradiance level during measurement, the measurement and control of cell junction temperature, and the contacting of the separate current and potential leads to the cell under test. Solar cells respond to only part of the solar spectrum, irradiance measurement made with blackbody detectors lead to spectral mismatch errors. The use of reference cells with a spectral response similar to that of the test cell reduces this error. Reference cells are calibrated at standard atmospheric conditions with all cells calibrated at the same conditions.

Curtis, H. B.↗

A Study of the Adequacy of Quasi-geostrophic Dynamics for Modeling the Effect of Frontal Cyclones on the Larger Scale Flow

The major objectives of this study are to test the validity of quasi-geostrophic (QG) dynamics, compared to primitive equation (PE) dynamics for modeling the effect of cyclone waves on the larger scale flow, and to study the formation of frontal cyclones and the dynamics of occluded frontogenesis. In order to extend the realism of the initial conditions over those used in earlier work of this nature and in order to include strong surface frontal zones in the initial conditions, a horizontal resolution on the order of 100 km between gridpoints is needed. In order to allow for integrations of up to two weeks simulated time and to keep the logistics and cost of the runs feasible, the horizontal domain of the models must be reduced. Based on work concerning polar lows, the tropospheric static stability was reduced and was also allowed to vary in different tropospheric layers. Previous work used a 'standard atmosphere' temperature lapse rate. Stratospheric stability remains unchanged. The use of one of these 'reduced stability' cases, with no surface frontal zone present resulted in the discovery of normal mode perturbations.

Mudrick, S.↗

Relative spectral absorption of solar radiation by water vapor and cloud droplets

A moderate (20/cm) spectral resolution model which accounts for both the highly variable spectral transmission of solar radiation through water vapor within and above cloud, as well as the more slowly varying features of absorption and anisotropic multiple scattering by the cloud droplets, is presented. Results from this model as applied to the case of a typical 1 km thick stratus cloud in a standard atmosphere, with cloud top altitude of 2 km and overhead sun, are discussed, showing the relative importance of water vapor above the cloud, water vapor within the cloud, and cloud droplets on the spectral absorption of solar radiation.

Davies, R.↗

Proposed ozone reference models for the middle atmosphere

Since the publication of the last COSPAR International Reference Atmosphere (CIRA 72), large amounts of ozone data acquired from satellites have become available in addition to increasing quantities of rocketsonde, balloonsonde, Dobson, M83, and Umkehr measurements. From the available archived satellite data, models are developed for the new CIRA using 5 satellite experiments (Nimbus 7 SBUV and LIMS, AEM-2 SAGE, and SME IR and UVS) of the monthly latitudinal and altitudinal variations in the ozone mixing ratio in the middle atmosphere. Standard deviations and interannual variations are also quantified. The satellite models are shown to agree well with a previous reference model based on rocket and balloon measurements.

Keating, G. M.↗

Density and pressure variability in the mesosphere and thermosphere

In an effort to isolate the essential physics of the mesosphere and the thermosphere, a steady one-dimensional density and pressure model has been developed in support of related NASA activities, i.e., projects such as the AOTV and the Space Station. The model incorporates a zeroth order basic state including both the three-dimensional wind field and its associated shear structure, etc. A first order wave field is also incorporated in period bands ranging from about one second to one day. Both basic state and perturbation quantities satsify the combined constraints of mass, linear momentum and energy conservation on the midlatitude beta plane. A numerical (iterative) technique is used to solve for the vertical wind which is coupled to the density and pressure fields. The temperature structure from 1 to 1000 km and the lower boundary conditions are specified using the U.S. Standard Atmosphere 1976. Vertical winds are initialized at the top of the Planetary Boundary Layer using Ekman pumping values over flat terrain. The model also allows for the generation of waves during the geostrophic adjustment process and incorporates wave nonlinearity effects.

Davis, T. M.↗

Lower thermosphere densities of N2, O and Ar under high latitude winter conditions

Measurements of the neutral thermosphere were conducted in northern Scandinavia during the Energy Budget Campaign. These measurements included determinations of N2, O, and Ar densities using rocket-borne experiments. The results obtained in the experiments are presented, taking into account also details regarding the employed experimental methods, and an evaluation of the significance of the data. It is found that there are striking differences in thermospheric distributions of the neutral constituents under different geomagnetic conditions. Under quiet geomagnetic conditions there was reasonable agreement with the United States Standard Atmosphere. The concentrations of N2 and Ar were about 70 percent of the predicted values, while the O concentration was about 2.5 times greater.

Dickinson, P. H. G.↗

Empirical modeling of the thermosphere: An overview

A summary is given of thermospheric density modeling history and standard atmospheres. In particular, the approaches of the Jacchia and MSIS models were compared and contrasted. It was concluded that the Jacchia models are best if drag is the primary concern. MSIS is superior for variations in composition and temperature variations and comparison with theoretical models is facilitated by the use of spherical harmonics, which also provide a simple and consistent way of obtaining simplifications. Advantages and disadvantages of both models are listed and discussed.

Hedin, A.↗

Overview of shuttle data on density

The HiRAP (High Resolution Accelerometer Package) used on the Shuttle is described and examples of flight-derived density-altitude profiles are compared to the 1976 Standard Atmosphere. By flying an accelerometer along with a mass spectrometer it is possible to obtain the drag coefficients for the Shuttle. However, problems may arise due to contamination in the near-shuttle environment.

Blanchard, Robert↗

Algorithm Estimates Microwave Water-Vapor Delay

Accuracy equals or exceeds conventional linear algorithms. "Profile" algorithm improved algorithm using water-vapor-radiometer data to produce estimates of microwave delays caused by water vapor in troposphere. Does not require site-specific and weather-dependent empirical parameters other than standard meteorological data, latitude, and altitude for use in conjunction with published standard atmospheric data. Basic premise of profile algorithm, wet-path delay approximated closely by solution to simplified version of nonlinear delay problem and generated numerically from each radiometer observation and simultaneous meteorological data.

Robinson, Steven E.↗

An improved rocket ozonesonde (Rocoz-A). III - Northern mid-latitude ozone measurements from 1983 to 1985

The results of the ozone measurements taken during rocket-busted flights of the rocket ozonesonde Rocoz-A at the NASA Wallops Flight Facility from August 1983 to September 1985 are presented. Nineteen profiles were obtained using Rocoz-A and electrochemical concentration cell ozonesondes, standard U.S. meteorological radiosondes, and Super-Loki datasondes. The results were found to agree with the Krueger and Minzner (1976) midlatitude ozone model for the 1976 U.S. Standard Atmosphere.

Barnes, Robert A.↗

An XPS study of space-exposed polyimide film

X-ray photoelectron spectroscopy was used to assess changes induced in the surface chemistry of Kapton H (Du Pont Trademark) polyimide strips exposed to the low Earth orbit environment at the space-end of the LDEF satellite on Experiment A0133. Results from flight specimens are compared to material cut from the same lot and stored at room temperature under standard atmospheric conditions. One notable difference was a nearly two-fold increase in surface oxygen (atom-percent composition) for specimens exposed to the direct space environment as compared to controls. In addition, space exposed specimens contained distinct silicon peaks (2p 103.2 eV and 2s 154.2 eV) in their spectra. These peaks were absent in control spectra. It is likely that the increase in oxygen is associated with the silicon. This is in agreement with reports of widespread silicon contamination throughout the LDEF satellite.

Lee, Myung↗