Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sample Calculations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Bioaccumulation of Cr, Ni, Cd and Pb in the Economically Important Freshwater Fish Schizothorax plagiostomus from Three Rivers of Malakand Division, Pakistan: Risk Assessment for Human Health

Contamination of freshwater ecosystems such as rivers with hazardous heavy metals is an environmental problem of public health concern. Accumulation of potentially toxic heavy metals in freshwater fish causes a potential health threat to their consumers including humans. The present research aimed to (1) investigate the accumulation of four potentially toxic heavy metals viz. Cr, Ni, Cd and Pb in muscle tissue of the commercially important freshwater fish Schizothorax plagiostomus at different sites of River Swat, River Panjkora and River Barandu in northern Pakistan (2) to compare gross metal accumulation in the fish samples by calculating metal pollution index (MPI) and (3) to assess potential risk to the health of the fish consumers. Samples were analyzed for the heavy metals by flame atomic absorption spectrophotometry (FAAS). Risk analysis showed that Ni risk was higher at River Panjkora and River Barandu, Pb risk was higher at River Swat and River Panjkora while Cd risk was quite low at all the three rivers.

54 ENVIRONMENTAL SCIENCES↗

Closure Report for Corrective Action Unit 539: Areas 25 and 26 Railroad Tracks Nevada National Security Site, Nevada with ROTCs 1-2, Revision 0

This Closure Report (CR) presents information supporting the closure of Corrective Action Unit (CAU) 539: Areas 25 and 26 Railroad Tracks, Nevada National Security Site, Nevada. This CR complies with the requirements of the Federal Facility Agreement and Consent Order (FFACO) that was agreed to by the State of Nevada; U.S. Department of Energy (DOE), Environmental Management; U.S. Department of Defense; and DOE, Legacy Management. The corrective action sites (CASs) within CAU 539 are located within Areas 25 and 26 of the Nevada National Security Site. Corrective Action Unit 539 comprises the following CASs: • 25-99-21, Area 25 Railroad Tracks • 26-99-05, Area 26 Railroad Tracks The purpose of this CR is to provide documentation supporting the completed corrective actions and provide data confirming that the closure objectives for CASs within CAU 539 were met. To achieve this, the following actions were performed: • Reviewed documentation on historical and current site conditions, including the concentration and extent of contamination. • Conducted radiological walkover surveys of railroad tracks in both Areas 25 and 26. • Collected ballast and soil samples and calculated internal dose estimates for radiological releases. • Collected in situ thermoluminescent dosimeter measurements and calculated external dose estimates for radiological releases. • Removed lead bricks as potential source material (PSM) and collected verification samples. • Implemented corrective actions as necessary to protect human health and the environment. • Properly disposed of corrective action and investigation wastes. • Implemented an FFACO use restriction (UR) for radiological contamination at CAS 25-99-21. The approved UR form and map are provided in Appendix F and will be filed in the DOE, National Nuclear Security Administration Nevada Site Office (NNSA/NSO), Facility Information Management System; the FFACO database; and the NNSA/NSO CAU/CAS files. From November 29, 2010, through May 2, 2011, closure activities were performed as set forth in the Streamlined Approach for Environmental Restoration (SAFER) Plan for Corrective Action Unit 539: Areas 25 and 26 Railroad Tracks, Nevada Test Site, Nevada. The purposes of the activities as defined during the data quality objectives process were as follows: • Determine whether contaminants of concern (COCs) are present. • If COCs are present, determine their nature and extent, implement appropriate corrective actions, and properly dispose of wastes. Analytes detected during the closure activities were evaluated against final action levels (FALs) to determine COCs for CAU 539. Assessment of the data generated from closure activities revealed the following: • At CAS 26-99-05, the total effective dose for radiological releases did not exceed the FAL of 25 millirem per Industrial Area year. Potential source material in the form of lead bricks was found at three locations. A corrective action of clean closure was implemented at these locations, and verification samples indicated that no further action is necessary. • At CAS 25-99-21, the total effective dose for radiological releases exceeds the FAL of 25 millirem per Industrial Area year. Potential source material in the form of lead bricks was found at eight locations. A corrective action was implemented by removing the lead bricks and soil above FALs at these locations, and verification samples indicated that no further action is necessary. Pieces of debris with high radioactivity were identified as PSM and remain within the CAS boundary. A corrective action of closure in place with a UR was implemented at this CAS because closure activities showed evidence of remaining soil contamination and radioactive PSM. Future land use will be restricted from surface and intrusive activities. Closure activities generated waste streams consisting of industrial solid waste, recyclable materials, low-level radioactive waste, and mixed low-level radioactive waste. Wastes were disposed of in the appropriate onsite landfills. The NNSA/NSO provides the following recommendations: • Clean closure is required at CAS 26-99-05. • Closure in place is required at CAS 25-99-21. • A UR is required at CAS 25-99-21. • A Notice of Completion to the NNSA/NSO is requested from the Nevada Division of Environmental Protection for closure of CAU 539. • Corrective Action Unit 539 should be moved from Appendix III to Appendix IV of the FFACO.

54 ENVIRONMENTAL SCIENCES↗

Solute chemistry for streams draining geomorphic features and varying land cover gradients in the East River watershed, Colorado

This dataset contains solute chemistry data and GPS coordinates for surface water samples collected in the East River watershed in the Elk and West Elk Ranges of Colorado from August 3rd through August 11th, 2022. Samples were collected from streams and groundwater seeps as part of a comprehensive analysis within the watershed of how different geomorphic features (such as landslides and rock glaciers) along with variations in land cover (such as the presence of vegetation) affect stream water quality in this Rocky Mountain headwater environment. This dataset includes concentrations of the following in a single csv file: fluoride, chloride, sulfate, nitrate, calcium, potassium, magnesium, sodium, silicon, and total organic carbon (TOC). All concentrations are reported in mg/L. The sulfate data in this version have been updated to account for an earlier ion chromatograph instrument method error whereby sulfate and bromide peaks overlapped in calibration solution samples, biasing calculated sulfate concentrations low by 30-50%. Sulfate data reported herein are from a re-run of the samples performed in December 2024 using a corrected instrument method. All samples were stored under refrigerated conditions and filtered on initial collection.

54 ENVIRONMENTAL SCIENCES↗

Hydrated Anions: From Clusters to Bulk Solution with Quasi-Chemical Theory

The interactions of hydrated ions with molecular and macromolecular solution and interface partners are strong on a chemical energy scale. Here we recount the foremost ab initio theory for the evaluation of the hydration free energies of ions, namely, quasi-chemical theory (QCT). We focus on anions, particularly halides but also the hydroxide anion, because they have been outstanding challenges for all theories. For example, this work supports understanding the high selectivity for F – over Cl – in fluoride-selective ion channels despite the identical charge and the size similarity of these ions. QCT is built by the identification of inner-shell clusters, separate treatment of those clusters, and then the integration of those results into the broader-scale solution environment. Recent work has focused on a close comparison with mass-spectrometric measurements of ion-hydration equilibria. We delineate how ab initio molecular dynamics (AIMD) calculations on ion-hydration clusters, elementary statistical thermodynamics, and electronic structure calculations on cluster structures sampled from the AIMD calculations obtain just the free energies extracted from the cluster experiments. That theory–experiment comparison has not been attempted before the work discussed here, but the agreement is excellent with moderate computational effort. This agreement reinforces both theory and experiment and provides a numerically accurate inner-shell contribution to QCT. The inner-shell complexes involving heavier halides display strikingly asymmetric hydration clusters. Asymmetric hydration structures can be problematic for the evaluation of the QCT outer-shell contribution with the polarizable continuum model (PCM). Nevertheless, QCT provides a favorable setting for the exploitation of PCM when the inner-shell material shields the ion from the outer solution environment. For the more asymmetrically hydrated, and thus less effectively shielded, heavier halide ions clustered with waters, the PCM is less satisfactory. We therefore investigate an inverse procedure in which the inner-shell structures are sampled from readily available AIMD calculations on the bulk solutions. This inverse procedure is a remarkable improvement; our final results are in close agreement with a standard tabulation of hydration free energies, and the final composite results are independent of the coordination number on the chemical energy scale of relevance, as they should be. Finally, a comparison of anion hydration structure in clusters and bulk solutions from AIMD simulations emphasize some differences: the asymmetries of bulk solution inner-shell structures are moderated compared with clusters but are still present, and inner hydration shells fill to slightly higher average coordination numbers in bulk solution than in clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identification of Distribution of Elastic Constants of SiC/SiC Braided Tubes

There has been considerable interest in chemical vapor infiltration (CVI) manufactured silicon carbide fiber and silicon carbide matrix (SiCf/SiCm) composite tubes due to their superior mechanical properties. There are many parameters in the manufacturing of SiCf/SiCm composite tubes such as elastic constants of constituent SiC fiber and SiC matrix, braiding angle, porosity, and others whose values vary over a range. A sensitivity analysis will be carried out to determine the dominant parameters among the abovementioned ones. We intend to determine the variability in elastic constants of SiCf/SiCm composite tubes considering the variability in dominant parameters. A chosen number of combinations of dominant variables will be sampled through Latin hypercube sampling (LHS) method. The elastic constants of composite tube namely Young's moduli in circumferential and longitudinal direction, Poisson's ratio and shear modulus will be calculated at sampled points through finite element (FE) analysis. A polynomial response surface (PRS) will be built for each of the elastic constants to be used a surrogate to FE analysis. once the predictive accuracy of PRS is verified at the validation set of data points, the PRS will be invoked 105 times in Monte Carlo simulations (MCS). The variability can be calculated based on MCS-generated data which will be presented at the conference.

42 ENGINEERING↗

Mach Conference, 2022.

There has been considerable interest in chemical vapor infiltration (CVI) manufactured silicon carbide fiber and silicon carbide matrix (SiC/SiC) composite tubes due to their superior mechanical properties. The SiC/SiC tubes are known to remain stable even after prolonged exposure to radiation. However, there are many variables in the manufacturing of SiC/SiC composite tubes such as elastic constants of constituent SiC fiber and SiC matrix, braiding angle, porosity, and others whose values vary over a range. The intention is to identify the distribution of elastic constants of SiC/SiC tubes which would help model the performance of the novel cladding material. To do so, a sensitivity analysis will be carried out to determine the dominant variables that influence the elastic constants of SiC/SiC tubes. A chosen number of combinations of dominant variables will be sampled through the Latin hypercube sampling (LHS) method. The elastic constants of composite tube namely Young's moduli in the circumferential and longitudinal direction, Poisson's ratio, and shear modulus will be calculated at sampled points through finite element (FE) analysis. A polynomial response surface (PRS) will be built for each of the elastic constants to be used as a surrogate to FE analysis. Once the predictive accuracy of PRS is verified at the validation set of data points, the PRS will be invoked 105 times in Monte Carlo simulations (MCS). The uncertainty can be quantified by calculating the coefficient of variation (CV) based on MCS-generated data which will be presented at the conference.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

The effects of lithium doping level on the structural, electrical properties of Li{sup +}-doped BPO{sub 4} solid electrolyte

Graphical abstract: - Highlights: • Better ionic conductivities when 0.05 ≤ x ≤ 0.13. • V{sup ‴}{sub B}+3Li{sub i} model was preferred. • Grain size, lattice strain and Li{sup +}conductivity are closely related. - Abstract: A series of lithium ion conducting solid electrolytes Li{sub x}B{sub 1−x/3}PO{sub 4}(x = 0.01, 0.05, 0.09, 0.13, 0.17, 0.20) is synthesized by a soft-chemistry route. FTIR and XRD measurements reveal that the electrolyte is pure phase of tetragonal structure. AC-impedance spectroscopy (AC-IS) at room temperature shows that Li{sub x}B{sub 1−x/3}PO{sub 4} exhibits higher ionic conductivities in the range 0.05 ≤ x ≤ 0.13, beyond which, the ionic conductivities decrease quickly. Maximum ionic conductivity of the Li{sub x}B{sub 1−x/3}PO{sub 4} reaches 3.35 × 10{sup −5} S cm{sup −1} at room temperature for x = 0.05. Direct current polarizing (DCP) measurement indicates that the decomposition voltage for the solid electrolyte reaches up to 3.7 V. Micro-structure parameters of synthesized Li{sub x}B{sub 1−x/3}PO{sub 4} samples are calculated by Rietveld refinement of X-ray diffraction spectra. The unit-cell parameters, lattice strain, crystal grain size and ionic conductivities of the samples are correlated with the lithium ion doping level x.

36 MATERIALS SCIENCE↗

Guide to Calculating Transport Efficiency of Aerosols in Occupational Air Sampling Systems

This report will present hand calculations for transport efficiency based on aspiration efficiency and particle deposition losses. Because the hand calculations become long and tedious, especially for lognormal distributions of aerosols, an R script (R 2011) will be provided for each element examined. Calculations are provided for the most common elements in a remote air sampling system, including a thin-walled probe in ambient air, straight tubing, bends and a sample housing.

61 RADIATION PROTECTION AND DOSIMETRY↗

Effects of the slab thickness on the crystal and electronic structures of In{sub 2}O{sub 3}(ZnO){sub m} revealed by first-principles calculations

Many conflicting electron microscopy data for In{sub 2}O{sub 3}(ZnO){sub m} indicate that it may have the polymorphous and polytypoid structures. We investigate their stabilities based on four controversial models. The calculated results confirm that the models with the zigzag feature are more stable than the others and it is possible to form different zigzag configurations in the samples as observed in the experiments. The dynamic process of eliminating the dangling bonds and the requirements of maximizing the symmetry and the distances between the In atoms in the slabs can be regarded as the dominant rules to stabilize the system, but the statistical equilibrium processes have the chances to transform it from the ground state structures to the other model structures. The study of the electronic structures based on the plane and zigzag models reveals that their band gaps and effective masses increase monotonically with m. The predicted band gaps are consistent with the experimental results. The anisotropic feature of electron effective mass tensor exhibited in the plane model differs from that of the zigzag one, which is so notable that can be employed to determine which model is more close to the actual structure of a given sample. The calculated results confirm the possibilities of the separation of conduction electrons and defects and the existence of the natural optimized transport channels in the layered structures, which demonstrate its advantage over ZnO to transport electrons and benefit its applications in the optoelectronic devices. - Graphical abstract: The conduction electrons are mainly distributed around the boundaries of the plane or zigzag shape. The optimized transport channels can be formed around the boundaries. - Highlights: • The formation mechanisms for the polytypoid structure of In{sub 2}O{sub 3}(ZnO){sub m} are revealed. • The predicted band gaps are consistent with the experimental results. • The natural optimized transport channels in the layered structures are confirmed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Proton Conductivity Studies on Biopolymer Electrolytes

Proton conducting solid biopolymer electrolyte membranes consisting of methyl cellulose (MC) and different wt.% of ammonium nitrate (NH{sub 4}NO{sub 3}) were prepared by solution cast technique. Impedance spectroscopy was carried out to study electrical characteristics of bulk materials. The ionic conductivity of the prepared samples was calculated using the bulk resistance (R{sub b}) obtained from impedance spectroscopy plot. The highest ionic conductivity obtained was 1.17x10{sup -4} Scm{sup -1} for the sample with composition ratio of MC(50): NH{sub 4}NO{sub 3}(50). To enhance the ionic conductivity, propylene carbonate (PC) and ethylene carbonate (EC) plasticizers were introduced. It was found that the ionic conductivity of polymer electrolyte membranes increased with the increase in plasticizers concentration. The ionic conductivities of solid polymer electrolytes based on MC-NH{sub 4}NO{sub 3}-PC was enhanced up to 4.91x10{sup -3} Scm{sup -1} while for the MC-NH{sub 4}NO{sub 3}-EC system, the highest conductivity was 1.74x10{sup -2} Scm{sup -1}. The addition of more plasticizer however decreases in mechanical stability of the membranes.

36 MATERIALS SCIENCE↗

Temperature distributions in the laser-heated diamond anvil cell from 3-D numerical modeling

We present TempDAC, a 3-D numerical model for calculating the steady-state temperature distribution for continuous wave laser-heated experiments in the diamond anvil cell. TempDAC solves the steady heat conduction equation in three dimensions over the sample chamber, gasket, and diamond anvils and includes material-, temperature-, and direction-dependent thermal conductivity, while allowing for flexible sample geometries, laser beam intensity profile, and laser absorption properties. The model has been validated against an axisymmetric analytic solution for the temperature distribution within a laser-heated sample. Example calculations illustrate the importance of considering heat flow in three dimensions for the laser-heated diamond anvil cell. In particular, we show that a “flat top” input laser beam profile does not lead to a more uniform temperature distribution or flatter temperature gradients than a wide Gaussian laser beam.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermophysical properties of heat-treated U-7Mo/Al dispersion fuel

In this study, the effects of interaction layer (IL) on thermophysical properties of U-7Mo/Al dispersion fuel were examined. Microstructural analyses revealed that ILs were formed uniformly on U-Mo particles during heating of U-7Mo/Al samples. The IL volume fraction was measured by applying image analysis methods. The uranium loadings of the samples were calculated based on the measured meat densities at 298 K. The density of the IL was estimated by using the measured density and IL volume fraction. Thermal diffusivity and heat capacity of the samples after the heat treatment were measured as a function of temperature and volume fractions of U-Mo and IL. The thermal conductivity of IL-formed U-7Mo/Al was derived by using the measured thermal diffusivity, heat capacity, and density. The thermal conductivity obtained in the present study was lower than that predicted by the modified Hashin–Shtrikman model due to the theoretical model’s inability to consider the thermal resistance at interfaces between the meat constituents.

density↗

Flexible single molecule simulation of reaction-diffusion processes

An algorithm is developed for simulation of the motion and reactions of single molecules at a microscopic level. The molecules diffuse in a solvent and react with each other or a polymer and molecules can dissociate. Such simulations are of interest e.g. in molecular biology. The algorithm is similar to the Green's function reaction dynamics (GFRD) algorithm by van Zon and ten Wolde where longer time steps can be taken by computing the probability density functions (PDFs) and then sample from the distribution functions. Our computation of the PDFs is much less complicated than GFRD and more flexible. The solution of the partial differential equation for the PDF is split into two steps to simplify the calculations. The sampling is without splitting error in two of the coordinate directions for a pair of molecules and a molecule-polymer interaction and is approximate in the third direction. The PDF is obtained either from an analytical solution or a numerical discretization. The errors due to the operator splitting, the partitioning of the system, and the numerical approximations are analyzed. The method is applied to three different systems involving up to four reactions. Comparisons with other mesoscopic and macroscopic models show excellent agreement.

97 MATHEMATICS AND COMPUTING↗

ADCP Upsample

This R script takes reads the csv file of stream-wise velocity data and generates a new time series of with comparable but distinct noise using the Langevin method and library. It simulates a time series measured at 1/10 the sampling rate by calculating a moving average of 10, though other sampling rates can be calculated by adjusting the moving average window. A stationary signal is calculated by taking the difference of the original signal and the moving average, then normalizing by the standard deviation of the moving average. The stationary signal is used to calculate drift and diffusion coefficients. Those coefficients are used to generate a new stationary signal. The new stationary signal is un-normalized and added to the moving average (or new equivalent signal) to create a new up-sampled velocity time-series.

Green, Nathan↗

The apparent solubility of aluminum (III) in Hanford high-level waste

The solubility of aluminum in Hanford nuclear waste impacts on the process ability of the waste by a number of proposed treatment options. For many years, Hanford staff has anecdotally noted that aluminum appears to be considerably more soluble in Hanford waste than the simpler electrolyte solutions used as analogues. There has been minimal scientific study to confirm these anecdotal observations, however. The present study determines the apparent solubility product for gibbsite in 50 tank samples. The ratio of hydroxide to aluminum in the liquid phase for the samples is calculated and plotted as a function of total sodium molarity. Total sodium molarity is used as a surrogate for ionic strength, because the relative ratios of mono, di and trivalent anions are not available for all of the samples. These results were compared to the simple NaOH-NaAl(OH{sub 4})H{sub 2}O system, and the NaOH-NaAl(OH{sub 4})NaCl-H{sub 2}O system data retrieved from the literature. The results show that gibbsite is apparently more soluble in the samples than in the simple systems whenever the sodium molarity is greater than two. This apparent enhanced solubility cannot be explained solely by differences in ionic strength. The change in solubility with ionic strength in simple systems is small compared to the difference between aluminum solubility in Hanford waste and the simple systems. The reason for the apparent enhanced solubility is unknown, but could include. kinetic or thermodynamic factors that are not present in the simple electrolyte systems. Any kinetic explanation would have to explain why the samples are always supersaturated whenever the sodium molarity is above two. Real waste characterization data should not be used to validate thermodynamic solubility models until it can be confirmed that the apparent enhanced gibbsite solubility is a thermodynamic effect and not a kinetic effect.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Combined short scale roughness and surface dielectric function gradient effects on the determination of tip-sample force in atomic force microscopy

The contribution of tip roughness to the van der Waals force between an atomic force microscopy probe tip and the sample is calculated using the multilayer effective medium model, which allows us to consider the relevant case of roughness characterized by correlation length and amplitude in the nanometer scale. The effect of the surface dielectric function gradient is incorporated in the tip-sample force model. It is concluded that for rms roughness in the few nanometers range the effect of short scale tip roughness is quite significant.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Theoretical and experimental studies of compression and shear deformation behavior of Osmium to 280 GPa

Abstract The compression behavior of osmium metal was investigated up to 280 GPa (volume compression V/V o = 0.725) under nonhydrostatic conditions at ambient temperature using angle dispersive axial x-ray diffraction (A-XRD) with a diamond anvil cell (DAC). In addition, shear strength of osmium was measured to 170 GPa using radial x-ray diffraction (R-XRD) technique in DAC. Both diffraction techniques in DAC employed platinum as an internal pressure standard. Density functional theory (DFT) calculations were also performed, and the computed lattice parameters and volumes under compression are in good agreement with the experiments. DFT predicts a monotonous increase in axial ratio ( c/a ) with pressure and the structural anomalies of less than 1% in ( c/a ) ratio reported below 150 GPa were not reproduced in theoretical calculations and hydrostatic measurements. The measured value of shear strength of osmium ( τ ) approaches a limiting value of 6 GPa above a pressure of 50 GPa in contrast to theoretical predictions of 24 GPa and is likely due to imperfections in polycrystalline samples. DFT calculations also enable the studies of shear and tensile deformations. The theoretical ideal shear stress is found along the (001)[1–10] shear direction with the maximal shear stress ∼24 GPa at critical strain ∼0.13.

Lin, Chia-Min↗