Search NASA⌕ Search

SEARCH · Search NASA

Results for “Scanning Transmission Electron Microscope”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Synthesis of polyaniline/SnO{sub 2} nanocomposite and its improved electrochemical performance

Highlights: • Supercapacitors based on PANI/SnO{sub 2} nanocomposite were reported. • Supercapacitors using this material gave a specific capacitance of 501 F g{sup −1}. • Capacitance retention was 85.8% over 2000 charge–discharge cycles. - Abstract: SnO{sub 2} was prepared by the hydrothermal route. Aniline monomer was polymerized in the suspension of SnO{sub 2} to form inorganic–organic nanocomposite materials, in which SnO{sub 2} particles were embedded within polyaniline (PANI). Morphological and structural characterizations of the prepared samples were carried out using scanning electron microscope; transmission electron microscope; power X-ray diffraction and Fourier transform infrared spectroscopy. Their electrochemical properties were also investigated using cyclic voltammetry, galvanostatic charge–discharge and electrochemical impedance spectroscopy. The as-prepared nanocomposites had excellent properties in the capacitance, and its specific capacitance was up to 501 F g{sup −1} with a specific energy density of 66.8 W h kg{sup −1} at a power density of 960.6 W kg{sup −1}. The device fulfilled the requirement of long durability necessary for an energy storage system, since after 2000 galvanostatic charge–discharge cycles, retention of 85.8% in capacitance was observed. These results indicated that the PANI/SnO{sub 2} had a synergistic effect of the complementary properties of both components.

36 MATERIALS SCIENCE↗

Implementing an Accurate and Rapid Sparse Sampling Approach for Low-Dose Atomic Resolution STEM Imaging

Aberration correction for scanning transmission electron microscopes (STEM) has dramatically increased spatial image resolution for beam-stable materials, but it is the sample stability rather than the microscope that often limits the practical resolution of STEM images. To extract physical information from images of beam sensitive materials it is becoming clear that there is a critical dose/dose-rate below which the images can be interpreted as representative of the pristine material, while above it the observation is dominated by beam effects. Here we describe an experimental approach for sparse sampling in the STEM and in-painting image reconstruction in order to reduce the electron dose/dose-rate to the sample during imaging. By characterizing the induction limited rise-time and hysteresis in scan coils, we show that sparse line-hopping approach to scan randomization can be implemented that optimizes both the speed of the scan and the amount of the sample that needs to be illuminated by the beam. The dose and acquisition time for the sparse sampling is shown to be effectively decreased by factor of 5x relative to conventional acquisition, permitting imaging of beam sensitive materials to be obtained without changing the microscope operating parameters. As a result, the use of sparse line-hopping scan to acquire STEM images is demonstrated with atomic resolution aberration corrected Z-contrast images of CaCO 3 , a material that is traditionally difficult to image by TEM/STEM because of dose issues.

36 MATERIALS SCIENCE↗

Nanoscale probing of resonant photonic modes in dielectric nanoparticles with focused electron beams

We report that understanding the optical responses of nanostructures with high spatial resolution is paramount in photonic engineering. The excitation of resonant optical-frequency geometric modes in oxide nanoparticles is explored using monochromated electron energy-loss spectroscopy in a scanning transmission electron microscope. These geometric or cavity modes are found to produce a progression of resonance peaks within the bandgap regions of the electron energy-loss spectra of CeO 2 , TiO 2 , and MgO nanoparticles. Complementary simulations of the electron probe combined with analytic Mie analysis are performed to interpret the complex spectral features and to understand their underlying physical origins. The factors that influence the energies, shapes, and strengths of these modes are also investigated and their dependence upon nanoparticle size, geometry, refractive index, aggregation, impact parameter, and electron kinetic energy are elucidated. Taken together, this work demonstrates the unique ability of fast electron spectroscopy to determine the photonic density of states in individual and complex assemblies of dielectric nanoparticles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Applications of aberration corrected scanning transmission electron microscopy and electron energy loss spectroscopy to thin oxide films and interfaces.

Aberration correction in the scanning transmission electron microscope allows spatial resolutions of the order of one ngstr m to be routinely achieved. When combined with electron energy loss spectroscopy, it is possible to simultaneously map the structure, the chemistry and even the electronic properties of materials in one single experiment. Here we will apply these techniques to the characterization of thin films and interfaces based on complex oxides with the perovskite structure. The relatively large lattice parameter of these materials combined with the fact that most of them have absorption edges within the reach of the spectrometer optics makes these materials ideal for these experiments. We will show how it is possible to map the chemistry of interfaces atomic plane by atomic plane, including light element imaging such as O. Applications to cobaltite and titanate thin films will be described.

36 MATERIALS SCIENCE↗

Aqueous solution synthesis and photoluminescence properties of two-dimensional dendritic PbWO{sub 4} nanostructures

Graphical abstract: PbWO{sub 4} two-dimensional dendritic nanostructures (2DDNs) were prepared at room temperature through a facile aqueous solution route using only Pb(NO{sub 3}){sub 2} and Na{sub 2}WO{sub 4} as reaction reagents and distilled water as solvent. - Highlights: • Two-dimensional dendritic PbWO4 nanostructures were prepared through a facile aqueous solution route at room temperature. • A “two-step” growth mechanism was proposed for the formation of two-dimensional dendritic PbWO4 nanostructures. • The two-dimensional dendritic PbWO4 nanostructures exhibit good photoluminescence properties. - Abstract: PbWO{sub 4} two-dimensional dendritic nanostructures (2DDNs) were prepared at room temperature through a facile aqueous solution route. X-ray diffraction, scanning electron microscope, transmission electron microscope and X-ray energy dispersive spectrometer were used to characterize the obtained samples. The PbWO{sub 4} 2DDN was in one plane, with a nearly circular shape and sizes of ∼10 μm. The PbWO{sub 4} 2DDNs were composed of curved nanowires around 200 nm in diameters, which were connected together to form a network nanostructure. The effects of reaction conditions including the concentration of react reagents, the reaction temperature, and the reaction time were systematically investigated and a possible formation mechanism for the formation of 2DDNs was proposed. The optical properties, such as UV–vis spectra and photoluminescence spectra of PbWO{sub 4}, were studied. The advantages of this synthetic route include the first synthesis of PbWO{sub 4} 2DDNs, simple synthetic procedure, room reaction temperature, and high reproducibility of the process.

36 MATERIALS SCIENCE↗

Mesoporous hollow Zn{sub 2}SiO{sub 4}:Mn{sup 2+} nanospheres: The study of photoluminescence and adsorption properties

Graphical abstract: Mesoporous hollow structure of Zn{sub 2}SiO{sub 4}:Mn{sup 2+} phosphors. - Highlights: • Mesoporous hollow Zn{sub 2}SiO{sub 4}:Mn{sup 2+} nanospheres are prepared via the layer-by-layer technique. • The Zn{sub 2}SiO{sub 4}:Mn{sup 2+} nanospheres exhibit better adsorption capabilities of Pb{sup 2+}, Fe{sup 3+} than Cd{sup 2+}. • The Zn{sub 2}SiO{sub 4}:Mn{sup 2+} nanospheres exhibit strong green emission around 524 nm. • With the increase of doped Mn{sup 2+} concentration, the emission peak shows a red-shift. - Abstract: Mesoporous hollow Zn{sub 2}SiO{sub 4}:Mn{sup 2+} nanospheres were prepared via the layer-by-layer technique using CTAB as surfactant. The structures/microstructures and morphologies of the as-synthesized phosphors were characterized by X-ray diffraction, scanning electron microscope, transmission electron microscope and N{sub 2} adsorption–desorption porosimetry. The adsorption capacity to remove toxic metal ions in water was tested and the results showed that the Zn{sub 2}SiO{sub 4}:Mn{sup 2+} nanospheres exhibited better adsorption capabilities of Pb{sup 2+}, Fe{sup 3+} than Cd{sup 2+}. Moreover, the as-obtained hollow Zn{sub 2}SiO{sub 4}:Mn{sup 2+} phosphors exhibited strong green emission around 524 nm at room temperature. When the atomic ratio of Zn to Mn was 97:3, the emission intensity of Zn{sub 2}SiO{sub 4}:Mn{sup 2+} phosphor was about 1.2 times that of commercial phosphors. Furthermore, with the increase of doped Mn{sup 2+} concentration, the emission peak showed a red-shift.

36 MATERIALS SCIENCE↗

Note: Direct measurement of the point-to-point resolution for microns-thick specimens in the ultrahigh-voltage electron microscope

We report on a direct measurement method and results of the point-to-point resolution for microns-thick amorphous specimens in the ultrahigh-voltage electron microscope (ultra-HVEM). We first obtain the ultra-HVEM images of nanometer gold particles with different sizes on the top surfaces of the thick epoxy-resin specimens. Based on the Rayleigh criterion, the point-to-point resolution is then determined as the minimum distance between centers of two resolvable tangent gold particles. Some values of resolution are accordingly acquired for the specimens with different thicknesses at the accelerating voltage of 2 MV, for example, 18.5 nm and 28.4 nm for the 5 {mu}m and 8 {mu}m thick epoxy-resin specimens, respectively. The presented method and results provide a reliable and useful approach to quantifying and comparing the achievable spatial resolution for the thick specimens imaged in the mode of transmission electron including the scanning transmission electron microscope.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Sculpting Nanoscale Functional Channels in Complex Oxides Using Energetic Ions and Electrons

The formation of metastable phases has attracted significant attention because of their unique properties and potential functionalities. In the present study, we demonstrate the phase conversion of energetic-ion-induced amorphous nanochannels/tracks into a metastable defect fluorite in A 2 B 2 O 7 structured complex oxides by electron irradiation. Through in situ electron irradiation experiments in a scanning transmission electron microscope, we observe electron-induced epitaxial crystallization of the amorphous nanochannels in Yb 2 Ti 2 O 7 into the defect fluorite. This energetic-electron-induced phase transformation is attributed to the coupled effect of ionization-induced electronic excitations and local heating, along with subthreshold elastic energy transfers. We also show the role of ionic radii of A-site cations (A = Yb, Gd, and Sm) and B-site cations (Ti and Zr) in facilitating the electron-beam-induced crystallization of the amorphous phase to the defect-fluorite structure. The formation of the defect-fluorite structure is eased by the decrease in the difference between ionic radii of A- and B-site cations in the lattice. Molecular dynamics simulations of thermal annealing of the amorphous phase nanochannels in A 2 B 2 O 7 draw parallels to the electron-irradiation-induced crystallization and confirm the role of ionic radii in lowering the barrier for crystallization. Furthermore, these results suggest that employing guided electron irradiation with atomic precision is a useful technique for selected area phase formation in nanoscale printed devices.

36 MATERIALS SCIENCE↗

Atomic resolution convergent beam electron diffraction analysis using convolutional neural networks

Two types of convolutional neural network (CNN) models, a discrete classification network and a continuous regression network, were trained to determine local sample thickness from convergent beam diffraction (CBED) patterns of SrTiO 3 collected in a scanning transmission electron microscope (STEM) at atomic column resolution. Acquisition of atomic resolution CBED patterns for this purpose requires careful balancing of CBED feature size in pixels, acquisition speed, and detector dynamic range. The training datasets were derived from multislice simulations, which must be convolved with incoherent source broadening. Sample thicknesses were also determined using quantitative high-angle annular dark-field (HAADF) STEM images acquired simultaneously. The regression CNN performed well on sample thinner than 35 nm, with 70% of the CNN results within 1 nm of HAADF thickness, and 1.0 nm overall root mean square error between the two measurements. The classification CNN was trained for a thicknesses up to 100 nm and yielded 66% of CNN results within one classification increment of 2 nm of HAADF thickness. Our approach depends on methods from computer vision including transfer learning and image augmentation.

36 MATERIALS SCIENCE↗

Valence Electron Distributions from Sub-Angstrom Convergent Beam Electron Diffraction

Modern aberration-corrected scanning transmission electron microscopes can acquire four-dimensional data sets (“4D STEM”) by recording convergent beam electron diffraction (CBED) patterns, using precisely positioned, sub-angstrom probes. Here, we demonstrate that these patterns can probe the site symmetry, atomic displacements, and valence electron distributions at individual atomic columns. To this end, 4D STEM CBED patterns were acquired from SrTiO 3 single crystals and compared with patterns calculated using scattering potentials derived from density functional theory. Here, we show that an aspherical valence electron charge build-up at the oxygen sites causes intensity asymmetries in the low-angle scattering portion of the patterns. Using strained SrTiO 3 films containing subtle polar displacements within nanometer-sized domains, it is shown that the high-angle scattering portion in each pattern is sensitive to atomic displacements.

36 MATERIALS SCIENCE↗

Design of Electrostatic Aberration Correctors for Scanning Transmission Electron Microscopy

Abstract In a scanning transmission electron microscope (STEM), producing a high-resolution image generally requires an electron beam focused to the smallest point possible. However, the magnetic lenses used to focus the beam are unavoidably imperfect, introducing aberrations that limit resolution. Modern STEMs overcome this by using hardware aberration correctors comprised of many multipole elements, but these devices are complex, expensive, and can be difficult to tune. We demonstrate a design for an electrostatic phase plate that can act as an aberration corrector. The corrector is comprised of annular segments, each of which is an independent two-terminal device that can apply a constant or ramped phase shift to a portion of the electron beam. We show the improvement in image resolution using an electrostatic corrector. Engineering criteria impose that much of the beam within the probe-forming aperture be blocked by support bars, leading to large probe tails for the corrected probe that sample the specimen beyond the central lobe. We also show how this device can be used to create other STEM beam profiles such as vortex beams and probes with a high degree of phase diversity, which improve information transfer in ptychographic reconstructions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The Potential for Bayesian Compressive Sensing to Significantly Reduce Electron Dose in High Resolution STEM Images

The use of high resolution imaging methods in the scanning transmission electron microscope (STEM) is limited in many cases by the sensitivity of the sample to the beam and the onset of electron beam damage (for example in the study of organic systems, in tomography and during in-situ experiments). To demonstrate that alternative strategies for image acquisition can help alleviate this beam damage issue, here we apply compressive sensing via Bayesian dictionary learning to high resolution STEM images. These experiments successively reduce the number of pixels in the image (thereby reducing the overall dose while maintaining the high resolution information) and show promising results for reconstructing images from this reduced set of randomly collected measurements. We show that this approach is valid for both atomic resolution images and nanometer resolution studies, such as those that might be used in tomography datasets, by applying the method to images of strontium titanate and zeolites. As STEM images are acquired pixel by pixel while the beam is scanned over the surface of the sample, these post acquisition manipulations of the images can, in principle, be directly implemented as a low-dose acquisition method with no change in the electron optics or alignment of the microscope itself.

compressive sensing↗

A facile method to fabricate porous Co{sub 3}O{sub 4} hierarchical microspheres

Flower-like Co{sub 3}O{sub 4} hierarchical microspheres composed of self-assembled porous nanoplates have been prepared by a two-step method without employing templates. The first step involves the synthesis of flower-like Co(OH){sub 2} microspheres by a solution route at low temperatures. The second step includes the calcination of the as-prepared Co(OH){sub 2} microspheres at 200 deg. C for 1 h, causing their decomposition to form porous Co{sub 3}O{sub 4} microspheres without destruction of their original morphology. The samples were characterized by scanning electron microscope, transmission electron microscope, X-ray diffractormeter and Fourier transform infrared spectroscope. Some experimental factors including solution temperature and surfactant on the morphologies of the final products have been investigated. The magnetic properties of Co{sub 3}O{sub 4} microspheres were also investigated. - Graphical Abstract: Flower-like Co{sub 3}O{sub 4} microspheres are composed of self-assembled nanoplates and these nanoplates appear to be closely packed in the microspheres. These nanoplates consist of a large number of nanocrystallites less than 5 nm in size with a porous structure, in which the connection between nanocrystallites is random. Research Highlights: {yields} Flower-like Co{sub 3}O{sub 4} hierarchical microspheres composed of self-assembled porous nanoplates have been prepared by a two-step method without employing templates. {yields} Layered Co(OH){sub 2} microspheres were prepared with an appropriate approach under low temperatures for 1 h reaction. {yields} Calcination caused Co(OH){sub 2} decomposition to form porous Co{sub 3}O{sub 4} microspheres without destruction of their original morphology.

36 MATERIALS SCIENCE↗

Preparation of Ag{sub 2}S-Graphene nanocomposite from a single source precursor and its surface-enhanced Raman scattering and photoluminescent activity

Ag{sub 2}S-Graphene nanocomposite was prepared via a relatively facile hydrothermal method, using a single-source molecular (silver diethyldithiocarbamate [Ag(DDTC)]) as precursor and graphene sheets as a support material. The composite was characterized by X-ray power diffraction, X-ray photoelectron spectroscopy, Field-emission scanning electron microscope, transmission electron microscopy, Fourier transform infrared, Raman spectra and fluorescence spectroscopy. The experimental results show that the Ag{sub 2}S-Graphene nanocomposite displays surface-enhanced Raman scattering (SERS) activity for graphene oxide and reveals relatively better fluorescence property compared with pure Ag{sub 2}S. Highlights: {yields} Ag{sub 2}S nanoparticles are deposited on graphene sheets via a single source precursor. {yields} Graphene oxide is reduced to graphene in the hydrothermal reaction process. {yields} Ag{sub 2}S-Graphene system displays surface-enhanced Raman scattering activity and relatively better fluorescence property.

36 MATERIALS SCIENCE↗

Characterization of adiabatic shear bands in AM60B magnesium alloy under ballistic impact

Adiabatic shear bands in Mg alloy under ballistic impact at a velocity of 0.5 km.s{sup -1} were characterized by means of optical microscope, scanning electron microscope, transmission electron microscope and indenter technique. The results show that adiabatic shear bands were formed around the impacted crater, and the deformed and transformed bands were distinguished by etching colors in metallographic observation. TEM observation shows that the deformed bands were composed of the elongated grains and high density dislocations, while the transformed bands composed of the ultrafine and equiaxed grains were confirmed. In initial stage, the severe localized plastic deformation led to the formation of elongated grains in the deformed bands. With localized strain increasing, the severe localized deformation assisted with the plastic temperature rising led to the severe deformation grains evolved into the ultrafine and equiaxed grains, while the deformed bands were developed into transformed bands. The formation of the ultrafine and equiaxed grains in the transformed bands should be attributed to the twinning-induced rotational dynamic recrystallization mechanism. High microhardness in the bands was obtained because of the strain hardening, grain refining and content concentration. - Research Highlights: {yields} Deformed and transformed bands are found in Mg alloy under ballistic impact. {yields} The microstructures in the deformed and transformed bands are characterized. {yields} The evolution process of the microstructure in the bands is discussed.

36 MATERIALS SCIENCE↗

Synthesis and photocatalytic performance of g-C{sub 3}N{sub 4} nanosheets via liquid phase stripping

Well dispersed g-C{sub 3}N{sub 4} nanosheets were prepared by exfoliating the bulk g-C{sub 3}N{sub 4} in concentrated sulfuric acid. Phase structures, morphologies and elemental compositions were characterized by X-ray diffractometer, scanning electron microscope, transmission electron microscope and X-ray photoelectron spectrometer, respectively. Optical absorption and photoluminescence were also used to explain the optical performances of samples. NaI, BQ and IPA were used as the sacrificial agents for studying the surface reactions in the photocatalytic process. By the precipitation of g-C{sub 3}N{sub 4} nanosheets in ethanol with different ratios between concentrated sulfuric acid and ethyl alcohol, well dispersed g-C{sub 3}N{sub 4} nanosheets with high specific surface area can be obtained. The optimized g-C{sub 3}N{sub 4} (1:10) nanosheets achieve the highest photocatalytic activities under UV light illumination, which can degrade 10 mg/L RhB about 98% in 60 min, which is 6 times that of bulk g-C{sub 3}N{sub 4} under UV light. - Graphical Abstract: The schematic diagram of photocatalysis and excellent photocatalytic performance of g-C{sub 3}N{sub 4} nanosheets. - Highlights: • Well dispersed g-C{sub 3}N{sub 4} were prepared via Liquid Phase Stripping. • The g-C{sub 3}N{sub 4} is in a sheet like structure after being exfoliated. • The g-C{sub 3}N{sub 4} nanosheets possess high photocatalytic performances.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Specific corrosion product on interior surface of a bronze wine vessel with loop-handle and its growth mechanism, Shang Dynasty, China

In this paper, a kind of specific stalactitic product was found on the interior surface of a covered bronze wine vessel with loop-handle (Chinese name is you), which was fabricated in Shang Dynasty (1700 B.C.-1100 B.C.) and now is collected in Xiaogan Museum, Hubei province of China. The microstructures of the product were characterized systematically by using optical microscopy, scanning electron microscope, transmission electron microscope, X-ray diffraction, and Raman microscopy. The experimental results revealed that the product belonged to a kind of malachite with high purity and high crystallinity. The growth of the product was considered to be a possible reason that the vessel was overly airtight within a museum display cabinet besides a lid of the vessel, which made the excess of H{sub 2}O and CO{sub 2} gas concentrations inside the vessel during long-term storage. This corrosion product is very harmful to bronze cultural relics, because of a large amount of copper consumption from the matrix which will reduce its life. The growth mechanism of the specific stalactitic product and the suggestions for preservation of the similar bronze relics in museum were proposed. - Highlights: Black-Right-Pointing-Pointer The stalactitic product was the high purity and good crystallinity malachite. Black-Right-Pointing-Pointer Its growth was related to the excess of H{sub 2}O and CO{sub 2} gas concentrations in museum. Black-Right-Pointing-Pointer It is harmful to the bronzes, because copper will be consumed from the matrix. Black-Right-Pointing-Pointer The suggestions for preservation of the similar bronzes in museum were proposed.

36 MATERIALS SCIENCE↗

Properties of Rolled AZ31 Magnesium Alloy Sheet Fabricated by Continuous Variable Cross-Section Direct Extrusion

Rolling is currently a widely used method for manufacturing and processing high-performance magnesium alloy sheets and has received widespread attention in recent years. Here, we combined continuous variable cross-section direct extrusion (CVCDE) and rolling processes. The microstructure and mechanical properties of the resulting sheets rolled at different temperatures from CVCDE extrudate were investigated by optical microscopy, scanning electron microscope, transmission electron microscopy and electron backscatter diffraction. The results showed that a fine-grained microstructure was present with an average grain size of 3.62 μm in sheets rolled from CVCDE extrudate at 623 K. Dynamic recrystallization and a large strain were induced by the multi-pass rolling, which resulted in grain refinement. In the 573-673 K range, the yield strength, tensile strength and elongation initially increased and then declined as the CVCDE temperature increased. The above results provide an important scientific basis of processing, manufacturing and the active control on microstructure and property for high-performance magnesium alloy sheet.

36 MATERIALS SCIENCE↗