Search NASA⌕ Search

SEARCH · Search NASA

Results for “Screw”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

International test and demonstration of a 1-MW wellhead generator: Helical screw expander power plant

A 1-MW wellhead generator was tested in 1980, 1981, and 1982 by Mexico, Italy, and New Zealand at Cerro Prieto, Cesano, and Broadlands, respectively. The total flow helical screw expander portable power plant, Model 76-1, had been built for the U.S. Government and field-tested in Utah, USA, in 1978 and 1979. The expander had oversized internal clearances designed for self-cleaning operation on fluids that deposit adherent scale normally detrimental to the utiliation of liquid dominated fields. Conditions with which the expander was tested included inlet pressures of 64 to 220 psia, inlet qualities of 0% to 100%, exhaust pressures of 3.1 to 40 psia, electrial loads of idle and 110 to 933 kW, electrical frequencies of 50 and 60 Hz, male rotor speeds of 2500 to 4000 rpm, and fluid characteristics to 310,000 ppm total dissolved solids and noncondensables to 38 wt % of the vapor. Some testing was done on-grid. Typical expander isentropic efficiency was 40% to 50% with the clearances not closed, and 5 percentage points or more higher with the clearances partly closed. The expander efficiency increased approximately logarithmically with shaft power for most operations, while inlet quality, speed, and pressure ratio across the machine had only small effects. These findings are all in agreement with the Utah test results.

Mckay, R. A.↗
NASA NTRS1992

Screw-Thread Inserts As Temporary Flow Restrictors

Coil-spring screw-thread inserts found useful as temporary flow restrictors. Inserts placed in holes through which flow restricted, effectively reducing cross sections available for flow. Friction alone holds inserts against moderate upstream pressures. Use of coil-spring thread inserts as flow restrictors conceived as inexpensive solution to problem of adjusting flow of oxygen through orifices in faceplate into hydrogen/oxygen combustion chamber. Installation and removal of threaded inserts gentle enough not to deform orifice tubes.

Trimarchi, Paul↗
NASA NTRS1991

Spline-Locking Screw Fastening Strategy (SLSFS)

A fastener was developed by NASA Goddard for efficiently performing assembly, maintenance, and equipment replacement functions in space using either robotic or astronaut means. This fastener, the 'Spline Locking Screw' (SLS) would also have significant commercial value in advanced manufacturing. Commercial (or DoD) products could be manufactured in such a way that their prime subassemblies would be assembled using SLS fasteners. This would permit machines and robots to disconnect and replace these modules/parts with ease, greatly reducing life cycle costs of the products and greatly enhancing the quality, timeliness, and consistency of repairs, upgrades, and remanufacturing. The operation of the basic SLS fastener is detailed, including hardware and test results. Its extension into a comprehensive fastening strategy for NASA use in space is also outlined. Following this, the discussion turns toward potential commercial and government applications and the potential market significance of same.

Vranish, John M.↗
NASA NTRS1992

Spline-locking screw fastening strategy

A fastener was developed by NASA Goddard for efficiently performing assembly, maintenance, and equipment replacement functions in space using either robotics or astronaut means. This fastener, the 'Spline Locking Screw' (SLS) would also have significant commercial value in advanced space manufacturing. Commercial (or DoD) products could be manufactured in such a way that their prime subassemblies would be assembled using SLS fasteners. This would permit machines and robots to disconnect and replace these modules/parts with ease, greatly reducing life cycle costs of the products and greatly enhancing the quality, timeliness, and consistency of repairs, upgrades, and remanufacturing. The operation of the basic SLS fastener is detailed, including hardware and test results. Its extension into a comprehensive fastening strategy for NASA use in space is also outlined. Following this, the discussion turns toward potential commercial and government applications and the potential market significance of same.

Vranish, John M.↗
NASA NTRS1993

Three-Point Gear/Lead Screw Positioning

Triple-ganged-lead-screw positioning mechanism drives movable plate toward or away from fixed plate and keeps plates parallel to each other. Designed for use in tuning microwave resonant cavity. Other potential applications include adjustable bed plates and cantilever tail stocks in machine tools, adjustable platforms for optical equipment, and lifting platforms.

Calco, Frank S.↗
NASA NTRS1940

A generalized vortex theory of the screw propeller and its application

The vortex theory as presented by the author in earlier papers has been extended to permit the solution of the following problems: (1) the investigation of the relation between thrusts and torque distribution and energy loss as given by the induction of helical vortex sheets and by the parasite drag; (2) the checking of the theorem of Betz of the rigidly behaving helical vortex sheet of minimum induced energy loss; (3) the extension of the theory of the screw propeller of minimum energy loss for the inclusion of parasite-drag distribution along the blades. A simple system of diagrams has been developed to systematize the design of airplane propellers for a wide range of parasite-drag distribution along the blades.

Reissner, Hans↗
NASA NTRS1942

Contribution to the ideal efficiency of screw propellers

The stipulation of best thrust distribution is applied to the annular elements of the screw propeller with infinitely many blades in frictionless, incompressible flow and an ideal jet propulsion system derived possessing hyperbolic angular velocity distribution along the blade radius and combining the advantage of uniform thrust distribution over the section with minimum slipstream and rotation losses. This system is then compared with a propeller possessing the same angular velocity at all blade elements and the best possible thrust distribution secured by means of an induced efficiency varying uniformly over the radius. Lastly, the case of the lightly loaded propeller also is discussed.

Hoff, Wilhelm↗
NASA NTRS1994

Spline-Screw Payload-Fastening System

Payload handed off securely between robot and vehicle or structure. Spline-screw payload-fastening system includes mating female and male connector mechanisms. Clockwise (or counter-clockwise) rotation of splined male driver on robotic end effector causes connection between robot and payload to tighten (or loosen) and simultaneously causes connection between payload and structure to loosen (or tighten). Includes mechanisms like those described in "Tool-Changing Mechanism for Robot" (GSC-13435) and "Self-Aligning Mechanical and Electrical Coupling" (GSC-13430). Designed for use in outer space, also useful on Earth in applications needed for secure handling and secure mounting of equipment modules during storage, transport, and/or operation. Particularly useful in machine or robotic applications.

Vranish, John M.↗
NASA NTRS1993

Split spline screw

A split spline screw type payload fastener assembly, including three identical male and female type split spline sections, is discussed. The male spline sections are formed on the head of a male type spline driver. Each of the split male type spline sections has an outwardly projecting load baring segment including a convex upper surface which is adapted to engage a complementary concave surface of a female spline receptor in the form of a hollow bolt head. Additionally, the male spline section also includes a horizontal spline releasing segment and a spline tightening segment below each load bearing segment. The spline tightening segment consists of a vertical web of constant thickness. The web has at least one flat vertical wall surface which is designed to contact a generally flat vertically extending wall surface tab of the bolt head. Mutual interlocking and unlocking of the male and female splines results upon clockwise and counter clockwise turning of the driver element.

John M Vranish↗
NASA NTRS1996

Improvements In Ball-Screw Linear Actuators

Report describes modifications of design of type of ball-screw linear actuator driven by dc motor, with linear-displacement feedback via linear variable-differential transformer (LVDT). Actuators used to position spacecraft engines to direct thrust. Modifications directed toward ensuring reliable and predictable operation during planned 12-year cruise and interval of hard use at end of cruise.

Iskenderian, Theodore↗
NASA NTRS1999

Screw-released roller brake

A screw-released roller brake including an input drive assembly, an output drive assembly, a plurality of locking sprags, a mechanical tripper nut for unlocking the sprags, and a casing therefor. The sprags consist of three dimensional (3-D) sprag members having pairs of contact surface regions which engage respective pairs of contact surface regions included in angular grooves or slots formed in the casing and the output drive assembly. The sprags operate to lock the output drive assembly to the casing to prevent rotation thereof in an idle mode of operation. In a drive mode of operation, the tripper is either self actuated or motor driven and is translated linearly up and down against a spline and at the limit of its travel rotates the sprags which unlock while coupling the input drive assembly to the output drive assembly so as to impart a turning motion thereto in either a clockwise or counterclockwise direction.

Vranish, John M.↗
NASA NTRS2001

Homoepitaxial "Web Growth" of SiC to Terminate C-Axis Screw Dislocations and Enlarge Step-Free Surfaces

Homoepitaxial CVD growth of thin lateral cantilevers emanating from the edges of mesa patterns dry-etched into on-axis commercial 4H-SiC substrates prior to growth is reported. Cantilevers on the order of a micrometer thick extending tens of micrometers from the edge of a mesa have been grown. The termination of vertically propagating screw dislocations, including a micropipe, that are overgrown by the cantilevers has been demonstrated, in large part because the crystal structure of the cantilevers is established laterally from the mesa sidewalls. This technique could help reduce performance-degrading dislocations in SiC electrical devices.

Neudeck, Philip G.↗
NASA NTRSDate not supplied

Programable Lead Screw Actuated Self-Leveling Platform – PLSASLP

The programmable lead screw actuated self-leveling platform (PLSASLP) is developed to provide a self-leveling and load bearing foundation required by various autonomously operated planetary surface robotic or deployable systems. PLSASLP is capable of self-leveling from a 15-degree offset to accommodate the landing slope tolerance found on most landers designed to land on the surface of the Moon or Mars.

Iok M Wong↗
NASA NTRSDate not supplied

Programable Lead Screw Actuated Self-Leveling Platform

The Programmable Lead Screw Actuated Self-Leveling Platform (PLSASLP) was developed to provide a self-leveling and load-bearing foundation for payloads that need leveling of up to 15 degrees. Consequently, the PLSASLP can also provide a 30-degree conical field of view for precision pointing of instruments. PLSASLP is based on a simple, yet stable geometric model, where undesired motions are restricted to minimize hardware mass and complexity needed to keep the leveling base stable. Redundancy can also be implemented without changing the system architecture. Both system simplicity and configurability indicate the PLSASLP architecture is an effective, viable leveling and pointing solution for flight applications.

Iok M. Wong↗
NASA NTRSDate not supplied

Programable Lead Screw Actuated Self-Leveling Platform – PLSASLP

The programmable lead screw actuated self-leveling platform (PLSASLP) is developed to provide a self-leveling and load bearing foundation required by various autonomously operated planetary surface robotic or deployable systems. PLSASLP is capable of self-leveling from a 15-degree offset to accommodate the landing slope tolerance found on most landers designed to land on the surface of the Moon or Mars.

Iok M Wong↗
DOE OSTI2022

Shrouded screw device for removing and depositing material

A shrouded screw apparatus includes an outer tube, a telescoping inner tube, an auger bit, and an anti-rotation pin. The outer tube has a first sidewall defining a first interior chamber. The first sidewall has an opening defined therethrough. The inner tube is positioned in the first interior chamber. The inner tube has a second sidewall defining a second interior chamber. The second sidewall has a longitudinal groove defined therein. The inner tube is configured to extend from and retract within the first interior chamber of the outer tube. The auger bit is positioned in the second interior chamber and is rotatably coupled to the inner tube. The anti-rotation pin is coupled to the first sidewall of the outer tube and extends inwardly into the first interior chamber. The pin engages the longitudinal groove of the inner tube.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Shrouded screw device for removing and depositing material

A shrouded screw apparatus includes an outer tube, a telescoping inner tube, an auger bit, and an anti-rotation pin. The outer tube has a first sidewall defining a first interior chamber. The first sidewall has an opening defined therethrough. The inner tube is positioned in the first interior chamber. The inner tube has a second sidewall defining a second interior chamber. The second sidewall has a longitudinal groove defined therein. The inner tube is configured to extend from and retract within the first interior chamber of the outer tube. The auger bit is positioned in the second interior chamber and is rotatably coupled to the inner tube. The anti-rotation pin is coupled to the first sidewall of the outer tube and extends inwardly into the first interior chamber. The pin engages the longitudinal groove of the inner tube.

Kontras, Evan A.↗