Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sodium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Lidar observation of the mesospheric sodium layer over Urbana, Illinois

Atmospheric sodium has been observed over Urbana (40 deg 10 min N, 88 deg 10 min W) using a monostatic lidar tuned to 589.0 nm. The photocount data are processed using ditital smoothing filters to obtain continuous estimates of the sodium density versus altitude. The filter cutoff frequency is related to the height resolution and accuracy of the estimated profile. Wavelike structures in the sodium layer have been observed with typical wavelengths of 3-15 km and phase velocities of 1-3 m/s. The layer is characterized by a sharp falloff on the bottomside and often an undulatory motion of the bottomside of the layer accompanies the wave motion. The topside gradient of the layer is frequently observed to decrease through the night.

Richter, E. S.↗

Extracting Silicon From Sodium-Process Products

New acid leaching process purifies silicon produced in reaction between silicon fluoride and sodium. Concentration of sodium fluoride and other impurities and byproducts remaining in silicon are within acceptable ranges for semi-conductor devices. Leaching process makes sodium reduction process more attractive for making large quantities of silicon for solar cells.

Kapur, V.↗

Voluntary sodium intake during effort in hot environments

The factors that influence the amount of salt that a person adds to his food at mealtime, and the part played by the general requirement for salt in the daily diet stemming from the coluntary input of salt are studied. Careful measurements of salt intake and outflow were performed on ten marchers in a high temperature environment who were given individual salt shakers that were weighed before and after each meal. Some marchers were told to add salt to their meals on specific days. No parallelity was found between the voluntary sodium intake and the general sodium intake, the excretion of sodium in the urine or the environmental heat stress. Individual food habit was found to be the most important factor.

Sohar, E.↗

Design and implementation of a preprocessing system for a sodium lidar

A preprocessing system, designed and constructed for use with the University of Illinois sodium lidar system, was developed to increase the altitude resolution and range of the lidar system and also to decrease the processing burden of the main lidar computer. The preprocessing system hardware and the software required to implement the system are described. Some preliminary results of an airborne sodium lidar experiment conducted with the preprocessing system installed in the sodium lidar are presented.

Voelz, D. G.↗

A modeling analysis program for the JPL Table Mountain Io sodium cloud data

The abundant Io sodium cloud data obtained at JPL Table Mountain was reviewed. Images of the sodium cloud important to this modeling analysis program are contained in the 1976-1979 data set and the 1981 data set. A preliminary assessment of the 263 images in the 1981 data set for Region B/C was initiated. The spatial morphology of some of these images revealed the presence of the forward sodium cloud (Region B) and the directional features (Region C) as expected. Plans for the second quarter to initiate preliminary modeling analysis and to define further data processing are discussed.

Smyth, W. H.↗

A High-resolution Study of Local Interstellar Sodium

A high-resolution spectroscopic investigation was made of interstellar lines of sodium. From identifications of D1 and D2 line components concentrations of interstellar sodium gas were studied. Some preliminary data are provided on the spatial distribution of stronger sodium concentrations.

Ardeberg, A.↗

Io's sodium cloud

The first two-dimensional images of the source region of Io's neutral sodium cloud have been acquired by ground-based observation. Observed asymmetries in its spatial brightness distribution provide new evidence that the cloud is supplied by sodium that is ejected nonisotropically from Io or its atmosphere. Complementary, high-time-resolution, calibrated image sequences that give the first comprehensive picture of the variations of the fainter regions of the cloud extending more than 100,000 kilometers from Io were also obtained. These data demonstrate that the cloud exhibits a persistent systematic behavior coupled with Io's orbital position, a distinct 'east-west orbital asymmetry', a variety of spatial morphologies, and true temporal changes. The geometric stability of the sodium source is also indicated. Isolation of the cloud's temporal changes constitutes an important milestone toward its utilization as a long-term probe of Io and the inner Jovian magnetosphere.

Goldberg, B. A.↗

Real-time measurement of sodium chloride in individual aerosol particles by mass spectrometry

The method of particle analysis by mass spectrometry has been applied to the quantitative measurement of sodium chloride in individual particles on a real-time basis. Particles of known masses are individually introduced, in the form of a beam, into a miniature Knudsen cell oven (1600 K). The oven is fabricated from rhenium metal sheet (0.018 mm thick) and is situated in the ion source of a quadrupole mass spectrometer. A particle once inside the oven is trapped and completely volatilized; this overcomes the problem of partial volatilization due to particles bouncing from the filament surface. Individual particles are thermally volatilized and ionized inside the rhenium oven, and produce discrete sodium ion pulses whose intensities are measured with the quadrupole mass spectrometer. An ion pulse width of several milliseconds (4-12 ms) is found for particles in the mass range 1.3 x 10 to the -13th to 5.4 x 10 to the -11th g. The sodium ion intensity is found to be proportional to the particle mass to the 0.86-power. The intensity distribution for monodisperse aerosol particles possesses a geometric standard deviation of 1.09, showing that the method can be used for the determination of the mass distribution function with good resolution in a polydisperse aerosol.

Sinha, M. P.↗

A solid state tunable laser for resonance measurements of atmospheric sodium

The measurement of wave dynamics in the upper mesosphere using a solid-state laser to excite the resonance fluorescence line of sodium is examined. Two Nd:YAG lasers are employed to produce the sodium resonance line. The method involves mixing the 1064 nm radiation with that from a second Nd:YAG operating at 1319 nm in a nonlinear infrared crystal to directly produce 589 nm radiation by sum frequency generation. The use of the transmitter to measure the sodium layer from the Space Shuttle Platform is proposed. A diagram of the laser transmitter is presented.

Philbrick, C. R.↗

Lidar observation of the mesospheric sodium layer in Antarctica

The mesospheric sodium layer has been observed at Syowa Station in Antarctica during the wintering period of the 26th Japanese Antarctic Research Expedition. A lidar observation of the polar middle atmosphere at the station has been performed as a part of the Middle Atmosphere Program since 1983. At first stratospheric aerosols have been observed by the system based on a ruby laser. In 1985 a new transmitting system consisting of a tunable dye laser was added to that system to observe the sodium layer, too. The characteristics of the lidar system are given. The results of the mesospheric sodium layer observed on 42 nights during the period from March to October, 1985 are also given.

Nomura, A.↗

Eclipse measurements of Io's sodium atmosphere

The satellites of Jupiter eclipsed each other in 1985, and these events allowed an unusual measurement of the sodium in Io's extended atmosphere. Europa was used as a mirror to look back through the Io atmosphere at the sun. The measured column abundances suggest that the atmosphere is collisionally thin above 700 km and may be collisionally thin to the surface. The sodium radial profile above 700 km resembles a 1500 K exosphere with a surface density near 20,000 sodium atoms per cubic centimeter, but a complete explanation of the dynamics requires a more complex nonthermal model: the calculated loss rates suggest that the atmosphere is being replaced on a time scale of hours.

Schneider, Nicholas M.↗

Advanced rechargeable sodium batteries with novel cathodes

Various high energy density rechargeable batteries are being considered for future space applications. Of these, the sodium-sulfur battery is one of the leading candidates. The primary advantage is the high energy density (760 Wh/kg theoretical). Energy densities in excess of 180 Wh/kg were realized in practical batteries. Other technological advantages include its chemical simplicity, absence of self-discharge, and long cycle life possibility. More recently, other high temperature sodium batteries have come into the spotlight. These systems can be described as follow: Na/Beta Double Prime-Al2O3/NaAlCl4/Metal Dichloride Sodium/metal dichloride systems are colloquially known as the zebra system and are currently being developed for traction and load leveling applications. The sodium-metal dichloride systems appear to offer many of the same advantages of the Na/S system, especially in terms of energy density and chemical simplicity. The metal dichloride systems offer increased safety and good resistance to overcharge and operate over a wide range of temperatures from 150 to 400 C with less corrosion problems.

Distefano, S.↗

Extended sodium exosphere of the moon

Sodium emission has been observed up to 1200 km above the subsolar limb of the moon at third quarter. The intensity of the emission is far in excess of that predicted from the scale height and surface density derived previously from measurements of sodium emission at low altitudes above the lunar surface. This can be explained by assuming that there are both 'hot' and 'cold' components of the lunar sodium exosphere.

Potter, A. E.↗

Advanced rechargeable sodium batteries with novel cathodes

Various high energy density rechargeable batteries are being considered for future space applications. Of these, the sodium sulfur battery is one of the leading candidates. The primary advantage is the high energy density (760 Wh/kg theoretical). Energy densities in excess of 180 Wh/kg have been realized in practical batteries. More recently, cathodes other than sulfur are being evaluated. Researchers at JPL are evaluating various new cathode materials for use in high energy density sodium batteries for advanced space applications. The approach is to carry out basic electrochemical studies of these materials in a sodium cell configuration in order to understand their fundamental behaviors. Thus far studies have focused on alternate metal chlorides such as CuCl2 and organic cathode materials such as tetracyanoethylene (TCNE).

Distefano, S.↗

Advanced rechargeable sodium batteries with novel cathodes

Various high energy density rechargeable batteries are being considered for future space applications. Of these, the sodium-sulfur battery is one of the leading candidates. The primary advantage is the high energy density (760 W h/kg theoretical). Energy densities in excess of 180 W h/kg have been realized in practical batteries. More recently, cathodes other than sulfur are being evaluated. Various new cathode materials are presently being evaluated for use in high energy density sodium batteries for advanced space applications. The approach is to carry out basic electrochemical studies of these materials in a sodium cell configuration in order to understand their fundamental behaviors. Thus far, the studies have focussed on alternative metal chlorides such as CuCl2 and organic cathode materials such as TCNE.

Di Stefano, S.↗

High-resolution sodium absorption-line observations of the local interstellar medium

High-resolution observations of the sodium D1 and D2 interstellar absorption lines have been made toward 19 stars in the local ISM at distances ranging from 20 to 220 pc. A least-squares absorption line-fitting analysis is carried out on 10 of the stars that show detectable sodium. The velocity structure, velocity dispersions, and column densities of the various interstellar cloud components are derived. For the majority of stars, the best-fit dispersion parameter is about 2 km/s, corresponding to an upper limit for the kinetic temperature of the interstellar gas of about 5500 K. No sodium is detected toward stars with distances less than 42 pc, placing an upper limit 2.5 x 10 to the 18th/sq cm to the hydrogen column density in these lines of sight.

Welsh, Barry Y.↗

Alternate cathodes for sodium-metal chloride batteries

Various metal chlorides were tested as possible cathode materials for sodium-metal batteries (in addition to Fe and Ni chlorides, which have been already developed to a stage of commercialization), using an electrochemical cell consisting of a pyrex tube, heated to 250 C, with the metal wire as working electrode, concentric Ni foil as counterelectrode, and high-purity Al as reference electrode. In particular, the aim of this study was to identify metal chlorides insoluble even in neutral melts, possible at the interface during overcharge, in order to eliminate the failure mode of the cell through a cationic exchange of the dissolved metal ions with sodium beta-double-prime alumina solid electrolyte. Results indicate that Mo and Co are likely alternatives to FeCl2 and NiCl2 cathodes in sodium batteries. The open circuit voltages of Na/CoCl(x) and Na/MoCl(x) cells at 250 C would be 2.55 V and 2.64 V, respectively.

Ratnakumar, B. V.↗

Sodium sulfur batteries for space applications

In 1986, Eagle-Picher Industries was selected by the Air Force to develop sodium sulfur cells for satellite applications. Specifically, the development program was geared toward low earth orbit goals requiring high charge and/or discharge rates. A number of improvements have been made on the cell level and a transition to a complete space battery was initiated at Eagle-Picher. The results of six months of testing a 250 watt/hour sodium sulfur space battery look very promising. With over 1000 LEO cycles conducted on this first battery, the next generation battery is being designed. This next design will focus on achieving greater energy densities associated with the sodium sulfur chemistry.

Degruson, James A.↗