Search NASA⌕ Search

SEARCH · Search NASA

Results for “Soft composites”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Ambient Ion Trapping and Separations for High Throughput Structurally Selective Material Deposition

While ion mobility coupled to mass spectrometry (IMS/MS) has been increasingly adapted to biological analysis, the structural and molecular specificity offered by IMS/MS has untapped potential for creating novel materials (for energy, catalysis, biomolecular switches etc.) with rationally tailored properties by precisely controlling the chemical structure and composition of these materials. While electrochemical and catalytic properties of the bulk material are understood by mass-selective ion-soft-landing, different structures of one molecule can exhibit distinct properties from the bulk. Many biological phenomenon occur at interfaces and are highly structurally specific. IMS/MS offers means to separate molecules in a sample (which is first ionized and released to gas phase from the condensed phase) based on mass and structure. Species thus separated can potentially be deposited onto surfaces with molecular and structural specificity, to perform fundamental investigations for understanding critical interfacial phenomenon. Key performance metrics for IMS/MS analysis are resolution of separations and sensitivity. Recently developed Structures for Lossless Ion Manipulations (SLIM)4 enabled unprecedented resolution in IMS separations. In addition, high sensitivity was enabled in SLIM due to lossless confinement of ions using radio frequency fields. Thus, SLIM enabled extremely long path length separations (up to 0.1 km thus far) providing efficient separation of molecular ions never before achieved (e.g. isotopologues, D&L amino acids). While SLIM has unprecedented analytical separations power/utility, the use of SLIM platform for depositing mobility and mass selected molecular ions has two specific technological challenges: (a) Pulsed nature of IMS separations and their low duty cycle and (b) the need for a low vacuum of ~4 torr for lossless ion confinement. These limitations lead to long deposition times due to loss of ions generated from the sample. Enabling ion confinement at atmospheric pressure will be path-breaking contribution to the fundamental understanding of ion manipulations and separations and will also enable novel science currently precluded due to the inability of the present technologies to confine ions under ambient conditions. Traditionally used radio frequency fields are ineffective in confining ions at high pressures due to ion/neutral collisions. To address these, we propose to (a) develop methods for confining and manipulating ions for lossless IMS separations at atmospheric pressure enabling high sensitivity and throughput and (b) use the high specificity of IMS/MS and high throughput from ambient ion confinement to perform mobility and mass selective ion deposition at atmospheric pressure. Our goal is to enable the study of the fundamental properties of energy/catalysis materials and biomolecules. This project paves the way for high-throughput, mass and structure selective material deposition for highly specific surface creation/functionalization (discussed in Section 2 of the report). Further, the developments reported continue to push the boundaries of this process to ambient conditions (discussed in Section 3 of the report). We conclude with a list of specific intellectual property and publications which have been the outcome of this funded project.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Freestanding Photoresist Film: A Versatile Template for Three-Dimensional Micro- and Nanofabrication

Ultrathin freestanding films with well-defined micro/nanostructures and robust mechanical properties are applied in many engineering applications including microelectronics, optics, filtration and separation, biomedical engineering, and nanotechnology. Although considerable efforts have been made toward the fabrication of freestanding thin films, it is still a significant challenge to develop a simple and reliable process for producing freestanding films with ultrathin thickness, well-regulated micro/nanopatterns, robust mechanical properties, macroscopic coverage area, and multi-layered composite structures. In this work, a significant advancement is reported in this regard. This study shows a new sacrificial-layer-free (SLF) lifting-off process, integrated with conventional micro- and nanolithography, enabling the release of micro- and nanopatterned photoresist (PR) films from the supporting substrate with unprecedented pattern coverage and structure characteristics. The freestanding PR film is resilient, can withstand significant bending and deformation, and is sufficiently flexible to be transferred onto substrates with 3D topography as a conformal soft stencil for further technological processing and applications. Moreover, the SLF lifting-off process provides a simple approach to prepare single-layered and multi-layered freestanding composite films. The results suggest that the novel SLF lifting-off process can significantly extend the capability of 3D micro-/nanofabrication.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Quantifying electron transport in aggregated colloidal suspensions in the strong flow regime

Electron transport in complex fluids, biology, and soft matter is a valuable characteristic in processes ranging from redox reactions to electrochemical energy storage. These processes often employ conductor–insulator composites in which electron transport properties are fundamentally linked to the microstructure and dynamics of the conductive phase. While microstructure and dynamics are well recognized as key determinants of the electrical properties, a unified description of their effect has yet to be determined, especially under flowing conditions. In this work, the conductivity and shear viscosity are measured for conductive colloidal suspensions to build a unified description by exploiting both recent quantification of the effect of flow-induced dynamics on electron transport and well-established relationships between electrical properties, microstructure, and flow. These model suspensions consist of conductive carbon black (CB) particles dispersed in fluids of varying viscosities and dielectric constants. In a stable, well-characterized shear rate regime where all suspensions undergo self-similar agglomerate breakup, competing relationships between conductivity and shear rate were observed. To account for the role of variable agglomerate size, equivalent microstructural states were identified using a dimensionless fluid Mason number, Mn f , which allowed for isolation of the role of dynamics on the flow-induced electron transport rate. At equivalent microstructural states, shear-enhanced particle–particle collisions are found to dominate the electron transport rate. This work rationalizes seemingly contradictory experimental observations in literature concerning the shear-dependent electrical properties of CB suspensions and can be extended to other flowing composite systems.

Science & Technology - Other Topics↗
DOE OSTI2023

Coordination-Dependent Chemical Reactivity of TFSI Anions at a Mg Metal Interface

Charge transfer across the electrode–electrolyte interface is a highly complex and convoluted process involving diverse solvated species with varying structures and compositions. Despite recent advances in in situ and operando interfacial analysis, molecular specific reactivity of solvated species is inaccessible due to a lack of precise control over the interfacial constituents and/or an unclear understanding of their spectroscopic fingerprints. However, such molecular-specific understanding is critical to the rational design of energy-efficient solid–electrolyte interphase layers. We have employed ion soft landing, a versatile and highly controlled method, to prepare well-defined interfaces assembled with selected ions, either as solvated species or as bare ions, with distinguishing molecular precision. Equipped with precise control over interfacial composition, we employed in situ multimodal spectroscopic characterization to unravel the molecular specific reactivity of Mg solvated species comprising (i.e., bis(trifluoromethanesulfonyl)imide, TFSI – ) anions and solvent molecules (i.e., dimethoxyethane, DME/G1) on a Mg metal surface relevant to multivalent Mg batteries. In situ multimodal spectroscopic characterization revealed higher reactivity of the undercoordinated solvated species [Mg-TFSI-G1] + compared to the fully coordinated [Mg-TFSI-(G1) 2 ] + species or even the bare TFSI – . These results were corroborated by the computed reaction pathways and energy barriers for decomposition of the TFSI – within Mg solvated species relative to bare TFSI – . Finally, we evaluated the TFSI reactivity under electrochemical conditions using Mg(TFSI) 2 –DME-based phase-separated electrolytes representing different solvated constituents. Based on our multimodal study, we report a detailed understanding of TFSI – decomposition processes as part of coordinated solvated species at a Mg-metal anode that will aid the rational design of improved sustainable electrochemical energy technologies.

25 ENERGY STORAGE↗
DOE OSTI2024

Resonant Soft X-ray Scattering Reveals Hierarchical Structure in a Multicomponent Vapor-Deposited Glass

Multiphase vapor-deposited glasses are an important class of materials for organic electronics, particularly organic photovoltaics and thermoelectrics. These blends are frequently regarded as molecular alloys and there have been few studies of their structure at nanometer scales. Here, in this work, we show that a codeposited system of TPD (N,N'-bis(3-methylphenyl)-N,N'-diphenylbenzidine) and DO37 (disperse orange 37), two small molecule glass-formers, separates into amorphous, compositionally distinct phases with a domain size and spacing ca. 10s of nanometers that depends on substrate temperature during deposition. Domains rich in one of the two components become larger and more pure at higher deposition temperatures. We use resonant soft X-ray scattering (RSoXS) complemented with atomic force microscopy (AFM) and photoinduced force microscopy to measure the phase separation, topography, and purity of the deposited films. A forward-simulation approach to RSoXS analysis, the National Institute of Standards and Technology RSoXS Simulation Suite (NIST RSoXS simulation suite), is used with models developed from AFM images to evaluate the energy dependence of scattering across multiple length scales and interpret the RSoXS with respect to structure within the films. We find that the RSoXS is sensitive to a length scale of phase separation buried within the film that is consistent with the surface composition profile, and correlates to the topography to an extent that depends on substrate temperature. We demonstrate that vacuum scattering, which is often ignored in RSoXS analysis, contributes significantly to the features and energy dependence of the RSoXS pattern, and then illustrate how to properly account for vacuum scattering to analyze films with significant roughness. We then use this analysis framework to understand structure development mechanisms that occur during vapor deposition of a TPD-DO37 codeposited glass with results that outline paths to tune morphology in multicomponent materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Making the most of your electrons: Challenges and opportunities in characterizing hybrid interfaces with STEM

Inspired by the unique architectures composed of hard and soft materials in natural and biological systems, synthetic hybrid structures and associated hard-soft interfaces have recently evoked significant interest. Soft matter is typically dominated by structural fluctuations even at room temperature, while hard matter is governed by rigid mechanical behavior. This dichotomy offers considerable opportunities to leverage the disparate properties offered by these components across a wide spectrum spanning from basic science to engineering insights with significant technological overtones. Such hybrid structures, which include polymer nanocomposites, DNA functionalized nanoparticle superlattices, and metal organic frameworks to name a few, have delivered promising insights into the technologically relevant applications such as catalysis, environmental remediation, optoelectronics, and medicine. The interfacial structure between the hard and soft phases demonstrates features across a variety of length scales and often strongly influence the functionality of hybrid systems. While scanning/transmission electron microscopy (S/TEM) has proven to be a valuable tool for acquiring intricate molecular and nanoscale details of these interfaces, the unusual nature of hybrid composites presents a suite of challenges that make assessing or establishing structure–property relationships especially difficult. There are additional considerations at all stages of sample analysis from preparing electron-transparent samples to obtaining sufficient contrast to resolve the interface between dissimilar materials given the dose sensitivity of soft materials. Here, we discuss each of these challenges and supplement a review of recent developments in the field with additional experimental investigations and simulations to present solutions for attaining a nano or molecular-level understanding of these interfaces. These solutions present a host of opportunities for investigating the role interfaces play in this unique class of functional materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

One-Component, Vinyl-Functional Fluorosilicone Pastes for Direct Ink Write Additive Manufacturing

In this study, one-component (“all-in-one”) fluorosilicone pastes specifically designed for application in direct ink write (DIW) additive manufacturing (AM) have been developed. They consist of vinyl-functional, methyltrifluoropropyl-containing (MeTfpS) terpolysiloxane base polymer(s), hydrosilyl-functional cross-linker(s), UV-sensitive hydrosilylation catalyst, thixotropic additive, and trimethylsilylated fumed silica filler, with other additives that are optional. Their base polymers were completely amorphous and linear, with molecular weights (M n ) ranging from approximately 7000 to 50,000 and specifically targeted for the viscosity range ideal for DIW. These polymers were prepared by anionic ring-opening polymerizations (A-ROP) of appropriate mixtures of cyclic siloxanes initiated by oligomeric, difunctional tetramethylammonium silanolate in the presence of a difunctional tetramethyldivinyldisiloxane end-blocker and molecular weight regulator. Two series of these terpolymers were prepared: one containing 5 mol % MeTfpS repeat units but varying degrees of polymerization (DP) from 80 to 600 and the other containing 5, 10, and 15 mol % MeTfpS at a constant DP of 600. All polymers contained mostly random distributions of MeTfpS repeat units. The pastes were prepared by speed-mixing, ready for use in DIW, they exhibited ideal thixotropy, long-term (over a year) rheological stability, and can be quickly (within seconds) and permanently cured by room-temperature, UV-activated hydrosilylation in air. The resulting elastomers showed base polymer molecular weight- and composition-dependent stress-induced crystallization (SIC) at higher molecular weights and lower trifluoropropyl contents and tunable Shore A hardness (30A–40A) typical for soft polysiloxane rubbers. Preliminary DIW tests indicated excellent printability with high precision of printed shapes and clearly present these one-component pastes as prime candidates for simple and practical printing of silicone elastomer objects.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Adaptive Stiffness Power Take-Off System for a Hydraulic Hose-Pump Point Absorber Wave Energy Converter

Two crucial challenges faced in the design of ocean wave energy converters (WECs) are maintaining high capacity factors and remaining robust in everchanging, harsh ocean environments. This study introduces a novel mechanism for achieving reactive WEC control with a soft hydraulic power take-off, thereby addressing both challenges. The device of interest involves a hydraulic pump, constructed from a fluidic flexible matrix composite (F2MC), which is cyclically stretched by driving waves and pressurizes working fluid through a turbine-generator. This class of fiber-reinforced stretch hoses is established for ocean use as robust moorings and shock absorbers. The dynamic properties of the F2MC pump depend on internal pressure, which can be controlled by a continuously variable transmission between the turbine and generator, allowing the system to be adapted for better performance over a wide range of wave conditions. This work presents a dynamic model for operation and adaptive behavior of this power take-off system, experimentally validates components of the model, and performs dynamic simulations of the system that show increases in power production and capacity factor compared to non-adaptive operation for a variety of driving wave conditions. This work develops the basis for future large-scale experimental testing and controller design of this system.

Wave energy conversion, fluidic flexible matrix co↗
DOE OSTI2026

Multiomics and deep learning dissect regulatory syntax in human development

Transcription factors establish cell identity during development by binding regulatory DNA in a sequence-specific manner, often promoting local chromatin accessibility and regulating gene expression1. Mapping accessible chromatin offers critical insights into transcriptional control, but available datasets for human development are restricted to bulk tissue, single organs or single modalities2. Here we present the Human Development Multiomic Atlas, a single-cell atlas of chromatin accessibility and gene expression from 817,740 fetal cells across 12 organs, spanning 203 cell types and more than 1 million candidate cis-regulatory elements, many of which exhibit organ-specific in vivo enhancer activity. Deep learning models trained to predict accessibility from local DNA sequence unravel a comprehensive lexicon of motifs that influence accessibility, including composite motifs exhibiting distinct syntactic constraints that are predicted to mediate transcription factor cooperativity. We identify ‘hard’ syntactic rules requiring precise motif spacing and orientation, ‘soft’ rules allowing flexible motif arrangements, and ubiquitous motifs inhibiting accessibility. Model-based interpretation of genetic variants reveals that disruption of motifs with positive and negative effects is associated with concordant effects on gene expression. Our work delineates how motif syntax governs cell-type-specific chromatin accessibility and provides a foundational resource for decoding cis-regulatory logic and interpreting genetic variation during human development.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Neutrino and pair creation in reconnection-powered coronae of accreting black holes

A ubiquitous feature of accreting black hole systems is their hard X-ray emission which is thought to be produced through Comptonization of soft photons by electrons and positrons in the vicinity of the black hole, in a region with optical depth of order unity. The origin and composition of this Comptonizing region, known as the corona, is a matter open for debate. In this paper we investigate the role of relativistic protons accelerated in black-hole magnetospheric current sheets for the pair enrichment and neutrino emission of AGN coronae. Our model has two free parameters, namely the proton plasma magnetization σ p , which controls the peak energy of the neutrino spectrum, and the Eddington ratio λ X,Edd (defined as the ratio between X-ray luminosity L X and Eddington luminosity L Edd ), which controls the amount of energy transferred to secondary particles. For sources with λ X,Edd ≳ λ Edd,crit (where λ Edd,crit ∼ 10 -1 for σ p = 10 5 or ∼ 10 -2 for σ p = 10 7 ), proton-photon interactions and γγ annihilation produce enough secondary pairs to achieve Thomson optical depths τ T ∼ 0.1-10. In the opposite case of λ X,Edd ≲ λ Edd,crit , the coronal pairs cannot originate only from hadronic interactions. Additionally, we find that the neutrino luminosity scales as L 2 X /L Edd for λ X,Edd ≲ λ Edd,crit , while it is proportional to L X for higher λ X,Edd values. We apply our model to four Seyfert galaxies, including NGC 1068, and discuss our results in light of recent IceCube observations.

active galactic nuclei↗
DOE OSTI2022

Compressive properties of silicone Bouligand structures

Abstract This article presents an examination of silicone, Bouligand lattices in compression. Appearing frequently in biological organisms and manufacturing design, Bouligand structures comprise layers of parallel strands or fibers oriented in a helical fashion. They can exhibit exceptional fracture resistance when composed of rigid or composite materials. The behavior of elastomeric Bouligand structures, however, is less well understood. Additively manufactured (AM) elastomeric lattices have applications in stress mitigation, medical devices, and soft robotics. This article demonstrates that Bouligand structures are a useful addition to the design space of AM elastomers. By adjusting the layer-rotation parameters, lattice stress can increase by more than 300% without altering the porosity. Additionally, we introduce path length metrics that help explain the observed relationship between layer rotation and compression response. Impact statement Additive manufacturing (AM) continues to push the boundary of manufacturable structures and enhance the ability to robustly design for specific properties and behaviors. The more we understand the design space of a novel AM microstructure, the greater its application range. In this article, we describe the mechanical behavior of helicoidal, elastomeric lattices and introduce path length metrics to help explain their stress response. We show that these structures can exhibit a large range of mechanical behaviors in compression, making them well suited for applications such as stress mitigation and impact absorption. Additionally, the path length metrics could become useful design tools and may be applicable to a larger set of cellular structures. These findings expand our ability to rapidly design materials with highly specific and customizable properties to meet the needs of modern engineering challenges. Graphical abstract

Van Meerbeek, I. M. (ORCID:000000021258132X)↗
DOE OSTI2022

Medial packing and elastic asymmetry stabilize the double-gyroid in block copolymers

Triply-periodic networks are among the most complex and functionally valuable self-assembled morphologies, yet they form in nearly every class of biological and synthetic soft matter building blocks. In contrast to simpler assembly motifs – spheres, cylinders, layers – networks require molecules to occupy variable local environments, confounding attempts to understand their formation. Here, we examine the double-gyroid network phase by using a geometric formulation of the strong stretching theory of block copolymer melts, a prototypical soft self-assembly system. The theory establishes the direct link between molecular packing, assembly thermodynamics and the medial map, a generic measure of the geometric center of complex shapes. We show that “medial packing” is essential for stability of double-gyroid in strongly-segregated melts, reconciling a long-standing contradiction between infinite- and finite-segregation theories. Additionally, we find a previously unrecognized non-monotonic dependence of network stability on the relative entropic elastic stiffness of matrix-forming to tubular-network forming blocks. The composition window of stable double-gyroid widens for both large and small elastic asymmetry, contradicting intuitive notions that packing frustration is localized to the tubular domains. This study demonstrates the utility of optimized medial tessellations for understanding soft-molecular assembly and packing frustration via an approach that is readily generalizable far beyond gyroids in neat block copolymers.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Self-Propulsion by Directed Explosive Emulsification

An active droplet system, programmed to repeatedly move autonomously at a specific velocity in a well-defined direction, is demonstrated. Coulombic energy is stored in oversaturated interfacial assemblies of charged nanoparticle-surfactants by an applied DC electric field and can be released on demand. Spontaneous emulsification is suppressed by an increase in the stiffness of the oversaturated assemblies. Rapidly removing the field releases the stored energy in an explosive event that propels the droplet, where thousands of charged microdroplets are ballistically ejected from the surface of the parent droplet. The ejection is made directional by a symmetry breaking of the interfacial assembly, and the combined interaction force of the microdroplet plume on one side of the droplet propels the droplet distances tens of times its size, making the droplet active. The propulsion is autonomous, repeatable, and agnostic to the chemical composition of the nanoparticles. The symmetry-breaking in the nanoparticle assembly controls the microdroplet velocity and direction of propulsion. Finally, this mechanism of droplet propulsion will advance soft micro-robotics, establishes a new type of active matter, and introduces new vehicles for compartmentalized delivery.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Tunable Electromechanical Liquid Crystal Elastomer Actuators

Liquid crystal elastomers (LCE) are soft materials which anisotropically shape morph in response to external stimuli. Herein, a method to produce large‐area carbon nanotube–LCE nanocomposite films with exceptional electrostrictive properties is examined. A methodology to produce telechelic precursor oligomeric composites at scale (>100 g) is presented along with the continuous casting and photocuring process. The carbon nanotubes are well‐aligned and well‐dispersed in the films, which exhibit exceptional anisotropic thermomechanical, optical, and thermal shape change characteristics. When an electric field is applied through the film thickness, the material quickly and reversibly contracts along the alignment direction. As an example, a compliant carbon nanotube–LCE film contracts >4% against a 140 kPa load, roughly comparable to the blocking force of many natural muscular tissues. Furthermore, it is demonstrated that this tunable contraction is dependent upon the electric field strength, and that the contraction mimics the form function of the input electric field (e.g., a sine wave). These compliant actuators are excellent candidates for incorporation into soft and/or biological systems.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Extensive nanoprecipitate morphology transformation in a nanostructured ferritic alloy due to extreme thermomechanical processing

Nano-oxide precipitates in a modern nanostructured ferritic alloy were investigated after extreme thermomechanical processing into a thin-walled tube geometry. It was found that the morphology of the precipitates changed from spherical to rod-shaped, with some increasing to aspect ratios of up to 9, despite the precipitate volume fraction (0.3%) and number density (> 10 23 m -3 ) of precipitates remaining unchanged. High-resolution electron microscopy showed that the precipitates likely remained coherent with the Fe-matrix, while atom probe tomography confirmed that the precipitate compositions remained unaffected by the transformation. The morphological change was attributed to the shearable nature of the (Y,Ti,O)-rich precipitates, indicating they should be considered as “soft” obstacles to dislocation motion. The elongation was most pronounced in larger (>5 nm) precipitates, which may be caused by preferential dissolution of the smallest (1–3 nm) precipitates followed by the competition between re-precipitation and solute diffusion to larger precipitates during recovery heat treatments.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Effects of graphene surface functionalities towards controlled reinforcement of a lignin based renewable thermoplastic rubber

In this report, we describe methods to enhance mechanical properties of a renewable thermoplastic rubber by incorporating functional graphene platelets into an equal-mass mixture of lignin, a feedstock from plant biomass, and a nitrile-butadiene rubber having 41 mol % acrylonitrile content (NBR41) that form a nanocomposite. Not all lignins yield mechanically strong material when they are combined with NBR41, and thus, limit its use for such rubbery products. Here, we evaluate different graphene oxides (GO) and reduced graphene oxides (rGO) dry-powders with different surface areas, functionality, and wettability in the synthesis of performance-enhanced nanocomposites of soft lignin/NBR41 matrix via a solvent-free, high shear reactive process. High surface area GO (HSGO) platelets with strong hydrophilicity exhibit good dispersion in the multiphase lignin/NBR41 composites with lignin dispersion varying from 200 to 2000 nm, resulting in superior reinforcement over other graphene derivatives. The addition of 1–4 wt % HSGO increased the tensile stress of the lignin/NBR41 thermoplastic rubber matrix by 60–160% (15–24 MPa) and the modulus by 200–700% (60–140 MPa). Scanning electron microscopy and small angle X-ray scattering results show that the well-dispersed HSGO platelets effectively disrupt the lignin-rich aggregates in NBR41 matrix, resulting in both strength and stiffness enhancements in the formed nanocomposites. This report on performance enhancement of lignin-based renewable polymers via the production of nanocomposite would increase potential for ‘finding the value of lignin’—a grand challenge associated with modern biorefineries.

36 MATERIALS SCIENCE↗
DOE OSTI2021

3D Printing of High Viscosity Reinforced Silicone Elastomers

Recent advances in additive manufacturing, specifically direct ink writing (DIW) and ink-jetting, have enabled the production of elastomeric silicone parts with deterministic control over the structure, shape, and mechanical properties. These new technologies offer rapid prototyping advantages and find applications in various fields, including biomedical devices, prosthetics, metamaterials, and soft robotics. Stereolithography (SLA) is a complementary approach with the ability to print with finer features and potentially higher throughput. However, all high-performance silicone elastomers are composites of polysiloxane networks reinforced with particulate filler, and consequently, silicone resins tend to have high viscosities (gel- or paste-like), which complicates or completely inhibits the layer-by-layer recoating process central to most SLA technologies. Herein, the design and build of a digital light projection SLA printer suitable for handling high-viscosity resins is demonstrated. Further, a series of UV-curable silicone resins with thiol-ene crosslinking and reinforced by a combination of fumed silica and MQ resins are also described. The resulting silicone elastomers are shown to have tunable mechanical properties, with 100–350% elongation and ultimate tensile strength from 1 to 2.5 MPa. Three-dimensional printed features of 0.4 mm were achieved, and complexity is demonstrated by octet-truss lattices that display negative stiffness.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Quinonoid radial π-conjugation

Radially π-conjugated macrocycles with mixed aromatic and quinonoid units display a level crossing as a function of composition. Near the level crossing with a specific composition a triplet biradical state is more stable than the singlet.

Bhattacharjee, Rameswar [Department of Chemistry a↗