Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solar angles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Repeatability and measurement uncertainty of the United States meteorological rocketsonde

It is pointed out that rocketsondes provide the only in situ 'ground truth' data for altitudes above 30 km. The need for precise temperature information has, therefore, led to a study of rocketsonde instrument repeatability and measurement uncertainty. Results obtained from root-mean-square difference and linear regression techniques are consistent and strongly suggest that the Datasonde precision is better than 1 C up to an altitude of 53 or 54 km. This result excludes atmospheric variability, which may occur within 5 min, and effects owing to spatial differences, which are small for paired measurements. At altitudes of 55 km and higher it is possible that sensor and flight-related anomalies, differences in radiation corrections owing to differing solar angles because of varying launch times, or even seasonal variations may create conditions that affect the magnitude of the standard corrections.

Schmidlin, F. J.↗

A preliminary assessment of the Nimbus-7 CZCS atmospheric correction algorithm in a horizontally inhomogeneous atmosphere

For an estimation of the concentration of phytoplankton pigments in the oceans on the basis of Nimbus-7 CZCS imagery, it is necessary to remove the effects of the intervening atmosphere from the satellite imagery. The principle effect of the atmosphere is a loss in contrast caused by the addition of a substantial amount of radiance (path radiance) to that scatttered out of the water. Gordon (1978) has developed a technique which shows considerable promise for removal of these atmospheric effects. Attention is given to the correction algorithm, and its application to CZCS imagery. An alternate method under study for affecting the atmospheric correction requires a knowledge of 'clear water' subsurface upwelled radiance as a function of solar angle and pigment concentration.

Gordon, H. R.↗

Enhancement of digital images through band ratio techniques for geological applications

The fundamentals in the use of band ratio techniques to enhance spectral signatures of geologic interest are discussed. The path radiance, additive term of the measured radiance at any given wavelength, is almost completely eliminated from LANDSAT images by subtracting the smallest value of the radiance measured in each channel, at shadows caused by topographic relief and clouds, and deep clear water bodies. By ratioing successive spectral channels the effect of solar angle of elevation is minimized and the product expresses, to a first approximation, a relationship between reflectances, which are intrinsic characteristics of the targets. Ratios between noncorrelated channels, such as R 7/4, R 7/5, and R 6/4 are useful to show variations in the vegetation cover, probably related to geobotanical associations.

Filho, R. A.↗

ERBE bidirectional model consistency check

A short analysis is presented of Earth Radiation Budget Experiment (ERBE) errors inherent in the directional models used for data interpretation. The models were all developed on the basis of experience with the Nimbus-7 ERB experiment, which had a spatial resolution one-third that of ERBE instrumentation. A pseudo-directional model is defined to simulate the ERBE scanner data, using the assumptions that the average radiant exitance for any particular scene is independent of the viewing geometry, geographic location and time the data is collected. The directionality of the view angle and solar zenith angle is accounted for by a method of bins.

Baldwin, D. G.↗

Convex-profile inversion of asteroid lightcurves - Theory and applications

A theory for asteroid light curve interpretation is derived from the reformulation, extension, and calibration of Ostro and Connely's (1984) convex-profile inversion, and then used to constrain the shapes of selected asteroids. The ideal conditions for the estimation of an asteroid's main cross-section from a light curve are (1) that the viewing-illumination geometry be equatorial, (2) that the scattering be uniform and geometric, (3) that the asteroid surface contours parallel to the equatorial plane be convex, (4) and that the solar angle not equal zero. Results are presented from simulations calibrating the kind, severity, and predictability of systematic errors.

Ostro, Steven J.↗

Studies of radiative effects for polar stratospheric clouds

Data from the Antarctic Ozone Experiment of 1987 are used to model the radiative effects of polar stratospheric clouds. Heating and cooling rates are examined, showing that the heating and/or cooling rates within a polar stratospheric cloud depend on particle size, composition, optical depth of the cloud, solar angle, and temperature profile. The rates for an optically thin Type I cloud are too small to drive vertical motions in the stratosphere, while optically thin Type II clouds cause a stratospheric cooling.

Kinne, S.↗

Advanced Photovoltaic Experiment, S0014: Preliminary Flight Results and Post-Flight Findings

The Advanced Photovoltaic Experiment (APEX) is an LDEF experiment designed to provide reference solar cell standards for laboratory measurements as well as to investigate the solar spectrum and the effects of long term exposure of solar cells to the LEO environment. Silicon and gallium arsenide solar cells were flown with the appropriate instrumentation to periodically measure cell performance and temperature. The experimental objectives, the design employed to realize these objectives and the solar cells and instrumentation selected for the flight are presented. A discussion of the flight data returned are included. Preliminary results from the post flight analysis of the absolute cavity radiometer, the digital solar angle sensor, and the Barr Associates narrow bandpass optical filters are also presented. The initial findings of work to determine the chemical nature of contamination layers on APEX are also presented.

Brinker, David J.↗

Net radiation, sensible and latent heat flux densities on slopes computed by the energy balance method

Energy balance components obtained over five grass-covered sloping surfaces near Manhattan, KS, using the Bowen ratio energy balance technique with the instruments mounted horizontally were compared with calculated values when the instruments were mounted parallel to the surfaces. Hourly values of the components changed when the instruments were parallel to the surfaces. The changes were larger at low solar angles (spring and fall) and on steeper slopes. An area average of daylight totals, assuming that all aspects were equally represented, changed only 0.1 percent on June 6 and 2.3 percent on October 11. The calculations, extended to steeper slopes, indicated small changes in the daylight totals for slopes of less than 10 deg.

Fritschen, Leo↗

Remote sensing of wetland biomass and productivity for global biosystem research

The study of ecosystem function and the contributions of particular ecosystems to global elemental cycling will require data collection from orbital platforms. Presently used ground sampling techniques are not adequate for large area vegetation assessments. The research was directed toward an understanding of the relationship between spectral radiance and plant canopy biomass. Changes in the architecture of the canopy alters the observed spectral radiance patterns. The green components of a plant canopy interacts most strongly with incident radiation and usually reflect edaphic conditions as they relate to plant vigor. Plant biomass serves as an excellent integrator of the environmental factors encountered by the plant and can be used as an indicator for predicting soil redox, nutrient status, microbial activity, etc. The use was examined of TM spectral data to discriminate biomass classes and, in turn, to relate the biomass classes to the chemical status of the soil. Several preliminary studies have indicated that solar angle can be used to improve biomass predictions. This important observation also suggests that latitudinal extrapolation of the biomass predicting models will be possible if selected characteristics of the incident radiation are known.

Hardisky, M. A.↗

Error in predicting hydrosol backscattering from remotely sensed reflectance

Monte Carlo simulations are carried out to determine the error in the inversion of backscattering from remotely sensed reflectance when geometrical shape factors of the light field are assumed to be unity. The results show that error in backscattering inversion can vary from a 40% overestimation to a 20% underestimation and is dependent on the solar angle and the hydrosol consituents contributing to backscattering. The simulations also demostrate that for chlorophyll concentrations ranging from 0.05 to 20 mg/cu m the most dramatic change in the geometrical shape factors occurs near 1.0 to 1.5 mg/cu m chlorophyll. The potential importance of bacteria in influencing the shape factor and the subsequent effect of bacteria on the retrieval of the backscattering from remote sensing reflectance are shown. Quartzlike material's strong impact on geometrical shape factors and errors of retrieval of backscattering at low chlorophyll concentrations are also demonstrated. Remote sensing reflectance inversion schemes must include information about the backscattering function to be successful.

Weidemann, A. D.↗

Single and Double ITCZ in Aqua-Planet Models with Globally and Temporally Uniform Sea Surface Temperature and Solar Insolation: An Interpretation

Previous studies (Chao 2000, Chao and Chen 2001, Kirtman and Schneider 2000, Sumi 1992) have shown that, by means of one of several model design changes, the structure of the ITCZ in an aqua-planet model with globally uniform SST and solar angle (U-SST-SA) can change between a single ITCZ at the equator and a double ITCZ straddling the equator. These model design changes include switching to a different cumulus parameterization scheme (e.g., from relaxed Arakawa Schubert scheme (RAS) to moist convective adjustment scheme (MCA)), changes within the cumulus parameterization scheme, and changes in other aspects of the model, such as horizontal resolution. Sometimes only one component of the double ITCZ shows up; but still this is an ITCZ away from the equator, quite distinct from a single ITCZ over the equator. Since these model results were obtained by different investigators using different models which have yielded reasonable general circulation, they are considered as reliable. Chao and Chen (2001; hereafter CC01) have made an initial attempt to interpret these findings based on the concept of rotational ITCZ attractors that they introduced. The purpose of this paper is to offer a more complete interpretation.

Chao, Winston C.↗

Factors Affecting the Latitudinal Location of the Intertropical Convergence Zone in a GCM

The dominant role of the latitudinal peak of the sea surface temperature (SST) in determining the latitudinal location of the intertropical convergence zone (ITCZ) is well-known. However, the roles of the other factors are less well-known and are the topic of this study. These other factors include the inertial stability, the interaction between convection and surface fluxes and the interaction between convection and radiation. Since these interactions involve convection, in a model they involve the cumulus parameterization scheme. These factors are studied with a general circulation model with uniform SST and solar angle. Under the aforementioned model settings, the latitudinal location of the ITCZ is the latitude where the balance of two types of attraction on the ITCZ, both due to earth's rotation, exists. Directly related to the Coriolis parameter, the first type pulls the ITCZ toward the equator and is not sensitive to model design changes. Related to the convective circulation, the second type pulls the ITCZ poleward and is sensitive to model design changes. Due to the shape and the magnitude of the attractors, the balance of the two types of attractions is reached either at the equator or more than 10 degrees away from the equator. The former case results in a single ITCZ over the equator and the latter case a double ITCZ straddling the equator.

Chao, Winston C.↗

Solar Sail Topology Variations Due to On-Orbit Thermal Effects

The objective of this research was to predict the influence of non-uniform temperature distribution on solar sail topology and the effect of such topology variations on sail performance (thrust, torque). Specifically considered were the thermal effects due to on orbit attitude control maneuvers. Such maneuvers are expected to advance the sail to a position off-normal to the sun by as much as 35 degrees; a solar sail initially deformed by typical pre-tension and solar pressure loads may suffer significant thermally induced strains due to the non-uniform heating caused by these maneuvers. This on-orbit scenario was investigated through development of an automated analytical shape model that iterates many times between sail shape and sail temperature distribution before converging on a final coupled thermal structural affected sail topology. This model utilizes a validated geometrically non-linear finite element model and a thermal radiation subroutine. It was discovered that temperature gradients were deterministic for the off-normal solar angle cases as were thermally induced strains. Performance effects were found to be moderately significant but not as large as initially suspected. A roll torque was detected, and the sail center of pressure shifted by a distance that may influence on-orbit sail control stability.

Banik, Jeremy A.↗

On-Orbit Noise Characterization for MODIS Reflective Solar Bands

Since launch, the Moderate Resolution Imaging Spectroradiometer (MODIS) has operated successfully on-board the NASA Earth Observing System (EOS) Terra and EOS Aqua spacecraft. MODIS is a passive cross-track scanning radiometer that makes observations in 36 spectral bands with spectral wavelengths from visible (VIS) to long-wave infrared. MODIS bands 1-19 and 26 are the reflective solar bands (RSB) with wavelengths from 0.41 to 2.2 micrometers. They are calibrated on-orbit using an on-board solar diffuser (SD) and a SD stability monitor (SDSM) system. For MODIS RSB, the level 1B calibration algorithm produces top of the atmosphere reflectance factors and radiances for every pixel of the Earth view. The sensor radiometric calibration accuracy, specified at each spectral band's typical scene radiance, is 2% for the RSB reflectance factors and 5% for the RSB radiances. Also specified at the typical scene radiance is the detector signal-to-noise ratio (SNR), a key sensor performance parameter that directly impacts its radiometric calibration accuracy and stability, as well as the image quality. This paper describes an on-orbit SNR characterization approach developed to evaluate and track MODIS RSB detector performance. In order to perform on-orbit SNR characterization, MODIS RSB detector responses to the solar illumination reflected from the SD panel must be corrected for factors due to variations of the solar angles and the SD bi-directional reflectance factor. This approach enables RSB SNR characterization to be performed at different response levels for each detector. On-orbit results show that both Terra and Aqua MODIS RSB detectors have performed well since launch. Except for a few noisy or inoperable detectors which were identified pre-launch, most RSB detectors continue to meet the SNR design requirements and are able to maintain satisfactory short-term stability. A comparison of on-orbit noise characterization results with results derived from pre-launch calibration and characterization are also provided.

Xiong, X.↗

Automated Detection of Clouds in Satellite Imagery

Many different approaches have been used to automatically detect clouds in satellite imagery. Most approaches are deterministic and provide a binary cloud - no cloud product used in a variety of applications. Some of these applications require the identification of cloudy pixels for cloud parameter retrieval, while others require only an ability to mask out clouds for the retrieval of surface or atmospheric parameters in the absence of clouds. A few approaches estimate a probability of the presence of a cloud at each point in an image. These probabilities allow a user to select cloud information based on the tolerance of the application to uncertainty in the estimate. Many automated cloud detection techniques develop sophisticated tests using a combination of visible and infrared channels to determine the presence of clouds in both day and night imagery. Visible channels are quite effective in detecting clouds during the day, as long as test thresholds properly account for variations in surface features and atmospheric scattering. Cloud detection at night is more challenging, since only courser resolution infrared measurements are available. A few schemes use just two infrared channels for day and night cloud detection. The most influential factor in the success of a particular technique is the determination of the thresholds for each cloud test. The techniques which perform the best usually have thresholds that are varied based on the geographic region, time of year, time of day and solar angle.

Jedlovec, Gary↗

Toward Landsat and Sentinel-2 BRDF Normalization and Albedo Estimation: A Case Study in the Peruvian Amazon Forest

The Amazon forest has been the focus of study by the science community during the last few decades. Remote sensing data analysis is the only way to study such a large geographical extent during an extended period of time. Since the launch in 2015 of Sentinel 2 and its increase in temporal resolution through the combination with Landsat sensors, a strong emphasis has been put on exploiting these data. Though these satellites provide near nadir observations, surface reflectance time series are affected by illumination variability throughout the year. These effects can be corrected using a Bidirectional Reflectance Distribution Function (BRDF) model. Franch et al. (2014a) developed a methodology to derive Landsat surface albedo and BRDF. It is based on the BRDF parameters from the MODerate Resolution Imaging Spectroradiometer (MODIS) which are disaggregated at Landsat spatial resolution (30 m). In this work, we apply the Franch et al. (2014a) method to normalize the surface reflectance for BRDF effects using the NASA's Harmonized Landsat Sentinel-2 (HLS) product. We apply this method to the Tambopata region in Peru from 2013 to 2017 and validate it using ground-based albedometer measurements. The results show that the near infrared reflectance can increase up to 0.06 (20%) for low solar angles while the impact on the red range and the NDVI is minor (<0.01). The evaluation of the surface albedo against field measurements shows an error of 0.01.

Landsat 8↗

Lessons Learned from Flight Observations of the GOES-R Magnetometer

The Geostationary Operational Environmental Satellite (GOES)-16 observatory was launched on 19 November 2016. During daily on-orbit operations, shadowing of the inboard magnetometer sensor unit occurs due to spacecraft geometry and solar angle. Throughout the shadowing periods of the inboard magnetometer, anomalous excursions of 20 nanotesla (nT) are observed. In addition to the excursions during shadow events, the measurement difference between the inboard and outboard magnetometer varies over the day, indicating erroneous measurements by one or both magnetometers. In addition, based on the deployment rotations, the zero offsets of the X and Y axes were found to be significantly different, ~30nT, from ground calibration data. Because of these observations, an extensive root cause investigation was undertaken to correct the magnetometer system for the next spacecraft in the GOES-R series. This paper documents the efforts of that activity and the lessons learned as a result of the investigation.

Schnurr, R.↗

Lessons Learned from Flight Observations of the GOES-R Magnetometer

The Geostationary Operational Environmental Satellite (GOES)-16 observatory was launched on 19 November 2016. During daily on-orbit operations, shadowing of the inboard magnetometer sensor unit occurs due to spacecraft geometry and solar angle. Throughout the shadowing periods of the inboard magnetometer, anomalous excursions of 20 nanotesla (nT) are observed. In addition to the excursions during shadow events, the measurement difference between the inboard and outboard magnetometer varies over the day, indicating erroneous measurements by one or both magnetometers. In addition, based on the deployment rotations, the zero offsets of the X and Y axes were found to be significantly different, ~30nT, from ground calibration data. Because of these observations, an extensive root cause investigation was undertaken to correct the magnetometer system for the next spacecraft in the GOES-R series. This paper documents the efforts of that activity and the lessons learned as a result of the investigation.

GOES-R↗