Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sorbent materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

The Planck Sorption Cooler: Using Metal Hydrides to Produce 20 K

The Jet Propulsion Laboratory has built and delivered two continuous closed cycle hydrogen Joule-Thomson (JT) cryocoolers for the ESA Planck mission, which will measure the anisotropy in the cosmic microwave background. The metal hydride compressor consists of six sorbent beds containing LaNi4.78Sn0.22 alloy and a low pressure storage bed of the same material. Each sorbent bed contains a separate gas-gap heat switch that couples or isolates the bed with radiators during the compressor operating cycle. ZrNiHx hydride is used in this heat switch. The Planck compressor produces hydrogen gas at a pressure of 48 Bar by heating the hydride to approx.450 K. This gas passes through a cryogenic cold end consisting of a tube-in-tube heat exchanger, three pre-cooling stages to bring the gas to nominally 52 K, a JT value to expand the gas into the two-phase regime at approx.20 K, and two liquid - vapor heat exchangers that must remove 190 and 646 mW of heat respectively.

hydrogen storage materials↗
DOE OSTI2023

Dynamic study of direct CO 2 capture from indoor air using poly(ethylenimine)-impregnated fiber sorbents

Supported amine adsorbents are promising materials for direct air capture (DAC) of CO 2 due to their high CO 2 capacity and relatively low energy requirement for regeneration. For a DAC process, it is essential to properly define operating parameters to achieve high sorbent productivity (amount of CO 2 captured per unit quantity of sorbent material over unit time). It is furthermore essential to understand the kinetic behavior of the process under the influence of various operating conditions such as the inlet air velocity, sorbent composition, and humidity to select an effective range of operating conditions to maximize sorbent productivity. Here, the dynamic behavior of a DAC process is probed using a fixed fiber sorbent contactor containing poly(ethylenimine) (PEI)-impregnated composite silica/cellulose acetate (CA) fibers. Throughout this study, experiments are conducted using both simulated air (398 ppm CO 2 balanced by N 2 ) and real indoor air (~400–500 ppm CO 2 ). The experimental behavior of the fibers using simulated air and indoor air is compared, and the influence of the inlet air velocity on the breakthrough behavior is assessed. By changing operating conditions, the impact on the fiber sorbent productivity (mmol CO 2 g fiber –1 h –1 ) is quantified to identify conditions that could favor high rates of CO 2 removal. The kinetics of steam-assisted CO 2 desorption are studied, identifying achievable desorption times. Productivities of 1.2 mmol CO 2 g fiber –1 h –1 are obtained using an inlet air velocity of 1.1 m s –1 . Performance trends show that further increasing the inlet air velocity will likely lead to even higher productivities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Development of Engineered Metal-Organic Framework (MOF) materials for perfluorooctane sulfonate (PFOS) Remediation

In this project, an engineered form of a Metal-Organic Framework (MOF) based material is developed for the removal of perfluorooctane sulfonate (PFOS) for real-world applications. The powdered MOF material has been demonstrated at the Pacific Northwest National Laboratory (PNNL) to selectively capture PFOS from distilled (DI) water with a large performance advantage over granulated activated carbon (GAC). In this project, the powdered material was transformed into an engineered form (using a polymer) to demonstrate PFOS adsorption capacity in tap water. PNNL developed and processed the MOF material in the engineering form (granules). After thorough characterization and stability testing, these engineered MOF granules were provided to an industrial collaborator, AVANTech, LLC, for testing and demonstration of continuous, long-term PFOS removal from tap water. The preliminary results showed PFOS sorption capacities at parts per billion (ppb) concentrations in tap water under a flow system. Also provided insight into sorbent-based material utilization in a continuous flow system. Further studies are required to optimize and understand sorption in such industrial-scale applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Evaluating Autoxidation Radical Scavengers and Additives to Enhance Aminopolymer Sorbent Stability

Solid amine sorbents have shown promise in the removal of ultradilute CO 2 from the atmosphere. Despite being a promising candidate material type for this application, these sorbents are prone to degradation during long-term exposure to environmental components such as CO 2 , O 2 , and H 2 O, with amine oxidation being a particularly challenging problem. In this study, we investigate the potency of different radical scavengers and additives in mitigating the degradation of a model poly- (ethylenimine) (PEI)/Al 2 O 3 sorbent under direct air capture (DAC)-relevant conditions. The results reveal that a 4,4′-bis(α,α- dimethylbenzyl)diphenylamine (BDDPA)-incorporated PEI/Al 2 O 3 sorbent showed the most resistance toward oxidative degradation at varying exposure times and BDDPA loadings under CO 2 -free air (21% O 2 /balance N 2 ) at 120 °C. Interestingly, under humid (∼43% relative humidity (RH) at 26 °C) and dry 0.04% CO 2 -air, the BDDPA/PEI/Al 2 O 3 sorbent showed enhanced sorbent stability both at 70 and 120 °C after 4.5 h of exposure. Under humid CO 2 -free air, at 120 °C, the antioxidant performance slightly declined (in comparison to the dry CO 2 -free air condition) but displayed a much higher stability than the pristine sorbent. Overall, the ability of BDDPA to inhibit sorbent degradation under dry and humid, CO 2 -free and CO 2 -containing (0.04%) air at intermediate (70 °C) and elevated (120 °C) temperatures is promising in prolonging sorbent stability and underscores the importance of performing accelerated oxidation studies in the presence of all species that are expected to be present in DAC processes to identify suitable stabilization treatments for sorbent materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Capturing carbon dioxide from air with charged-sorbents

Emissions reduction and greenhouse gas removal from the atmosphere are both necessary to achieve net-zero emissions and limit climate change. There is thus a need for improved sorbents for the capture of carbon dioxide from the atmosphere, a process known as direct air capture. In particular, low-cost materials that can be regenerated at low temperatures would overcome the limitations of current technologies. In this work, we introduce a new class of designer sorbent materials known as ‘charged-sorbents’. These materials are prepared through a battery-like charging process that accumulates ions in the pores of low-cost activated carbons, with the inserted ions then serving as sites for carbon dioxide adsorption. We use our charging process to accumulate reactive hydroxide ions in the pores of a carbon electrode, and find that the resulting sorbent material can rapidly capture carbon dioxide from ambient air by means of (bi)carbonate formation. Unlike traditional bulk carbonates, charged-sorbent regeneration can be achieved at low temperatures (90–100 °C) and the sorbent’s conductive nature permits direct Joule heating regeneration using renewable electricity. Given their highly tailorable pore environments and low cost, we anticipate that charged-sorbents will find numerous potential applications in chemical separations, catalysis and beyond.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1990

Sorption cooler technology development at JPL

Simple heating and cooling of chemisorption and physisorption compressors provide high pressure gas, which, when expanded through a Joule-Thomson (J- T) valve, can provide cooling from 0.3 to 200 K depending on the sorbent/gas combination. System life tests are under way on Pr(1-n)Ce(n)O(x)/O2 (PCO/O2) chemisorption compressors for 65-80 K cooling and on carbon/krypton (C/Kr) physisorption compressors for 120-140 K cooling. Investigations have been initiated to examine reliability physics issues related to critical compressor components such as sorbents, container materials and electrical heaters.

Jones, J. A.↗
NASA NTRS2017

Removal of Carbon Dioxide from Gas Mixtures Using Ion-Exchanged Silicoaluminophosphates

Na+-SAPO-34 sorbents were ion-exchanged with several individual metal cations for CO2 absorption at different temperatures (273-348 K) and pressures (<1 atm). In general, the overall adsorption performance of the exchanged materials increased as follows: Ce3+<Ti3+<Mg2+<Ca2+<Ag+<Na+<Sr2+. The strontium exchanged materials excelled at low-pressure ranges, exhibiting very sharp isotherms slopes at all temperatures. The Sr2+ species were responsible for the surface strong interaction and the cations were occupying exposed sites (SII') in the materials Chabazite cages. All the sorbent materials exhibited higher affinity for CO2 over the other gases tested (i.e., CH4, H2, N2 and O2) due to strong ion-quadrupole interactions. Sr2+-SAPO-34 sorbents are by far the best option for CO2 removal from CH4 mixtures, especially at low concentrations.

Hernandez-Maldonado, Arturo J↗
NASA NTRS2018

Removal of Carbon Dioxide from Gas Mixtures Using Ion-Exchanged Silicoaluminophosphates

Na.sup.+-SAPO-34 sorbents were ion-exchanged with several individual metal cations for CO.sub.2 absorption at different temperatures (273-348 K) and pressures (<1 atm). In general, the overall adsorption performance of the exchanged materials increased as follows: Ce.sup.3+<Ti.sup.3+<Mg.sup.2+<Ca.sup.2+<Ag.sup.+<Na.sup.+&- lt;Sr.sup.2+. The strontium exchanged materials excelled at low-pressure ranges, exhibiting very sharp isotherms slopes at all temperatures. The Sr.sup.2+ species were responsible for the surface strong interaction and the cations were occupying exposed sites (SII') in the materials Chabazite cages. All the sorbent materials exhibited higher affinity for CO.sub.2 over the other gases tested (i.e., CH.sub.4, H.sub.2, N.sub.2 and O.sub.2) due to strong ion-quadrupole interactions. Sr.sup.2+-SAPO-34 sorbents are by far the best option for CO.sub.2 removal from CH.sub.4 mixtures, especially at low concentrations.

Hernandez-Maldonado, Arturo J↗
DOE OSTI2020

Methods and materials for determination of distribution coefficients for separation materials

Methods and materials for determining the affinity of separation materials for targeted species are described. A composite separation medium is described that combines a separation material such as an ion exchange material or a sorbent with an SERS substrate. Methods and materials can be utilized to determine the distribution coefficient of a species for a separation material after running a single separation protocol followed by examination of the separation material of the protocol according to SERS. Disclosed methods can be utilized to determine the affinity of existing separation materials for targeted species as well as to determine the affinity of newly engineered separation materials to characterize species.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1989

Carbon Sorption Cryogenic Regenerator

Liquid-helium refrigerator includes regenerator filled with carbon sorbent made from Saran polyvinylidene chloride. Material results in lower operating temperatures and longer times between maintenance than comparable refrigerators containing other regenerators. Sorbent material machined to various configurations to fit inside cylindrical regenerator can. Configuration chosen with regard to heat capacity, pressure drop, and rate of sorption.

Jones, Jack A.↗
NASA NTRS2015

Development of a Test for Evaluation of the Hydrothermal Stability of Sorbents Used in Closed-Loop CO2 Removal Systems

The International Space Station Carbon Dioxide Removal Assembly uses zeolite 5A molecular sieve material packed into beds for the capture of cabin CO2. The beds are cyclically heated to drive off the CO2 and restore the removal capacity. Over time, the sorbent material has been found to break down resulting in dust that restricts flow through the beds. Humidity adsorbed in the 5A zeolite when it is heated is a suspected cause of this sorbent degradation. To evaluate the impact of adsorbed water during thermal cycling, the Hydrothermal Stability Test was developed. The test configuration provides comparative side-by-side flow restriction data for two sorbent materials at specifically controlled humidity levels. While the initial focus of the testing is on 5A zeolite materials currently used on the ISS, the system will also be used to evaluate future candidate materials. This paper describes the approach, the test system, current results, and future testing.

Knox, James C.↗
NASA NTRS1974

Silver oxide sorbent for carbon dioxide

Material can be regenerated at least 20 times by heating at 250 C. Sorbent is compatible with environment of high humidity; up to 20% by weight of carbon dioxide can be absorbed. Material is prepared from silver carbonate, potassium hydroxide or carbonate, and sodium silicate.

Colombo, G. V.↗
DOE OSTI2023

Alternative Materials Literature Review: A Review of Alternative Materials for Xenon Capture in Comparison to AgZ-PAN

A collaborative literature review between Idaho National Laboratory (INL) and Pacific National Laboratory (PNNL) was conducted to research alternative metals/materials for xenon adsorption in gaseous effluents generated from used nuclear fuel (UNF) reprocessing. The review was conducted to research sorbents that could outperform silver mordenite (AgZ) at ambient temperature. The use of silver requires complex and expensive waste disposal processes due to it being an RCRA metal, therefore alternative materials need to be researched and evaluated. The report details two different types of sorbent material: alternative zeolite materials and non-zeolite-based materials (i.e., MOFs, COFs, etc.). This report documents a brief history of the materials, what testing has been conducted on them, and what results suggest the possibility of outperforming the silver-based materials. Sorbent performance characteristics such as durability, capacity, and operating temperatures were evaluated. The simplicity of the sorbents was also evaluated, meaning how they are acquired (synthesized vs. naturally abundant). Recommendations were made for the most promising sorbents based on available research in the subject area and these recommended sorbents will be tested in the upcoming fiscal year. The recommended sorbents that are zeolite based are CHA zeolites, ZIF-69, and Na-ETS-10. The recommended sorbents that are non-zeolite based are SBMOF-1 and CC3.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS2017

Standard Isotherm Fit Information for Dry CO2 on Sorbents for 4-Bed Molecular Sieve

Onboard the ISS, one of the systems tasked with removal of metabolic carbon dioxide (CO2) is a 4-bed molecular sieve (4BMS) system. In order to enable a 4-person mission to succeed, systems for removal of metabolic CO2 must reliably operate for several years while minimizing power, mass, and volume requirements. This minimization can be achieved through system redesign and/or changes to the separation material(s). A material screening process has identified the most reliable sorbent materials for the next 4BMS. Sorbent characterization will provide the information necessary to guide system design by providing inputs for computer simulations.

Cmarik, G. E.↗
DOE OSTI2023

Alternative Materials Literature Review: A Review of Alternative Materials for Xenon Capture in Comparison to AgZ-PAN

A collaborative literature review between Idaho National Laboratory (INL) and Pacific National Laboratory (PNNL) was conducted to research alternative metals/materials for xenon adsorption in gaseous effluents generated from used nuclear fuel (UNF) reprocessing. The review was conducted to research sorbents that could outperform silver mordenite (AgZ) at ambient temperature. The use of silver requires complex and expensive waste disposal processes due to it being an RCRA metal, therefore alternative materials need to be researched and evaluated. The report details two different types of sorbent material: alternative zeolite materials and non-zeolite-based materials (i.e., MOFs, COFs, etc.). This report documents a brief history of the materials, what testing has been conducted on them, and what results suggest the possibility of outperforming the silver-based materials. Sorbent performance characteristics such as durability, capacity, and operating temperatures were evaluated. The simplicity of the sorbents was also evaluated, meaning how they are acquired (synthesized vs. naturally abundant). Recommendations were made for the most promising sorbents based on available research in the subject area and these recommended sorbents will be tested in the upcoming fiscal year. The recommended sorbents that are zeolite based are CHA zeolites, ZIF-69, and Na-ETS-10. The recommended sorbents that are non-zeolite based are SBMOF-1 and CC3.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Porous ceramic supports for resistively heated hybrid gas sorbents

A porous sorbent ceramic product includes a three-dimensional structure having an electrically conductive ceramic material, wherein the conductive ceramic material has an open cell structure with a plurality of intra-material pores, a sorbent additive primarily present in the intra-material pores of the conductive ceramic material for adsorption of a gas, and at least two electrodes in electrical communication with the conductive ceramic material.

Ellebracht, Nathan C.↗